Trust me guys if uoi are facing the issue with remote controller not connecting with drone then this video is the correct solution for the issue thank you so much man you saved my day 🎉❤️❤️
PERFECT ..... I fallowed along thru the first set of instructions and had the same result BUT .... I tried one more time to turn it all OFF AND BACK ON, ONE MORE TIME and they linked. THANK YOU FOR THIS VIDEO
when you reset spark's wifi settings with 3 beeps (holding power for ~9 seconds) turn it off immediately once you start seeing spark LEDs blinking green! Don't wait and just turn it off once it starts blinking green. Then, when you turn it on again, give it a few seconds to warm up and start, and hold power for 3 seconds. After that controller pairs to drone no prob in a standard way (3 buttons pressed at the same time). works like a charm. confirm.. I did that 5 times, all successful.
Hey man I just followed you with the instructions and it worked great for me. It connected or paired fine. I was having all kind of confused issues. Ty for your help hope you got it fixed
it's only 2 times you need to press to turn on and off the drone. not 3, 4, 5 times like you are showing. 1 time is to check the battery and the 2nd time you hold it is to turn it on. same goes when you turn it off.
This method does work. Follow the steps rite,when turning on and off the drone make sure you do it rite no double taps,you have to do it perfect if not you will have to start all over again by turning off drone than remove battery and do the process again
tks, works for me!! but I need to do it often tho.... could you link or copy past your page with all info by any chance? for when I am outside in the field.. tks a lot!!
I've done pretty much the same research and made notes as you have, except for jiggling the battery on and off. I'm at a loss, sometimes everything connects, other times, it feels like trial and error. My problem is connecting my iphone and the R/C together with Sparky, it seems like a wifi issue, I have Sparky and RC-Sparky networks. It's confusing which one to use. Thanks for your digging and I checked out your found solution video but haven't tried it.
You should press FN bottom +pause bottom + the last bottom on the top right ✅️...same time please then in will beep green , keep beeping then last step you will hold the power bottom icon the drone until the remote will paired ..that's all thanks
Mateo Lopez Wow thanks bro I was having the same issue and these steps fixed it thank you soooo much, merci beaucoup tu m'as aider même si toi t'as echouer
my rc blinks red the moment i turn it on and after a few seconds, it starts beeping. i tried pressing all three buttons but NOTHING is happening. when connecting spark to my phone, the qr code doesnt work so use the wifi method. i can connect my phone to spark with no problem but pairing my rc to spark doesnt seem to work. please helpppp
DJI had me : remove SD card then do 3 button reset on controller until annoying beeps start...then turn on drone press power button 3 seconds for beep and BAM all set.
The problem exists because a sd card has been removed with the spark on, you should put the same sd card and turn on the drone by connecting to Dji ASSISTENT 2
This thing is so inconsistent it's not fucking funny! When it does work , it works great ! I can go 250 ft high & since I live a few miles away from an airport and not fucking moron , so anything higher than that would likely take a jet motor out , seeing how a bird can do the same . I go 5000 ft out , with no issues . Getting it to connect is a totally different story!!!!!
Im having the same problem and if I knew dji products were like this I would have not bothered with it. Pressing on off on off on off.. .. Is just a fukin joke!!!!
You just did not enter the RC password,you need first to connect the Spark and RC to a smartphone and use de QR code that is located in the botton of RC.
i know how to solve it. as soon as it pairs and the controller blink green and red, go to the setting and calibrate your controller. but please turn off you spark first.
Dude. No shade but you totally waisted 19 minutes of my life. Suggestion. Upload content that will actually help others. If you don’t know the answer please don’t was it your time going threw all of this filming and uploading just to not have the answer afterwards. #annoyed.
Trust me guys if uoi are facing the issue with remote controller not connecting with drone then this video is the correct solution for the issue thank you so much man you saved my day 🎉❤️❤️
This was perfect, thank you! Luckily, my problem solved earlier in the game, but couldn't have done it without you. You rock!
PERFECT ..... I fallowed along thru the first set of instructions and had the same result BUT .... I tried one more time to turn it all OFF AND BACK ON, ONE MORE TIME and they linked. THANK YOU FOR THIS VIDEO
Bro I tried the second method and it worked fine … before i finally pair … I pressed drone battery button for 3 seconds and all good here ❤🎉
when you reset spark's wifi settings with 3 beeps (holding power for ~9 seconds) turn it off immediately once you start seeing spark LEDs blinking green! Don't wait and just turn it off once it starts blinking green. Then, when you turn it on again, give it a few seconds to warm up and start, and hold power for 3 seconds. After that controller pairs to drone no prob in a standard way (3 buttons pressed at the same time). works like a charm.
confirm.. I did that 5 times, all successful.
Thanks for the solution
this fix works check plz ua-cam.com/video/if7M8y00Aa0/v-deo.html
I FUCKING LOVE UUUUUUUUUUUUUUUUUUU.
Thank youuuu
Hey man I just followed you with the instructions and it worked great for me. It connected or paired fine. I was having all kind of confused issues. Ty for your help hope you got it fixed
Thanks bro zabardast
it's only 2 times you need to press to turn on and off the drone. not 3, 4, 5 times like you are showing. 1 time is to check the battery and the 2nd time you hold it is to turn it on. same goes when you turn it off.
I know right. Easy mistake if you don't know but frustrating to watch
Question. Is it possible to bind the mini 2 radio to the spark?
i have to try this first
Once you press for one beep
Immediately go to your remote control .
I saw your video you have taken a long time 🇰🇼🇰🇼🇰🇼😜
How you have problem to turn off and on? Press twice and second time you hold frkn button
MATE! thank you so much, this was exactly what I needed
1st method worked for me thank you soooo much. I couldn't get it paired for 2 months
Il mio spark ha tutti i Led rosso fissi ! Cosa posso fare ? Grazie
This method does work. Follow the steps rite,when turning on and off the drone make sure you do it rite no double taps,you have to do it perfect if not you will have to start all over again by turning off drone than remove battery and do the process again
Hello brother ...my drone just fly 1feet and fall to the ground.... Can u please help me with this problem?
Thanks sir 👏😊
Bro is your drone successful to connect or no
Working
Thank you 🙏
Second method worked for me. Thank you.
any chance we could see what you are reading? I would love to try this as I am having issues
finally i found the solution for my spark check this video www.youtube.com/watch?v=if7M8...
OMG I have never seen someone that Can't turn off a battery like this before, feel like I just wasted 15 mind of my life
Hi Yo
I follow your video 2 alleyways im having problem and it works fantastic.
tks, works for me!! but I need to do it often tho.... could you link or copy past your page with all info by any chance? for when I am outside in the field.. tks a lot!!
Obrigado! Aqui funcionou perfeitamente! Abraços
I have the same problem and non of these worked what did you do at end
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
I listening the way u read the manual thets ways I'm done tnx
Second one worked ur a legend thx ❤️❤️
Glad I could help
tank you bro cortulation
I've done pretty much the same research and made notes as you have, except for jiggling the battery on and off. I'm at a loss, sometimes everything connects, other times, it feels like trial and error. My problem is connecting my iphone and the R/C together with Sparky, it seems like a wifi issue, I have Sparky and RC-Sparky networks. It's confusing which one to use. Thanks for your digging and I checked out your found solution video but haven't tried it.
Thx sir
You should press FN bottom +pause bottom + the last bottom on the top right ✅️...same time please then in will beep green , keep beeping then last step you will hold the power bottom icon the drone until the remote will paired ..that's all thanks
Thx worked !!! 👌🏼🙏🏼
Awesome! It did work! yahooo! Thanks!
when I press the button on the back of the DJI spark it doesn't give me any beep. Could anyone help me with this issue?
U have to keep holding the button until it beeps around 5 to 6 seconds
I’m if the same problem the drone do not makes the beep to connected with the controller, i sold my drone but the another guy can’t do this
Check to see if you have an sad card in the drone if so remove it and try again
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
This did work work for me
I tried it again and it worked
My spark camra is no connect the mobile
I use Spark rarely but every time problems like i lunch spacecraft to space
Wow thanks bro I was having the same issue and these steps fixed it thank you soooo much🤩😁😊
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
I fix my issue connecting to the WiFi on the drone not the control ok. And now works perfect
It worked thanks
❤🎉😮😊แดอพ์. ไฟไฟไฟแอดพ์
Mateo Lopez
Wow thanks bro I was having the same issue and these steps fixed it thank you soooo much, merci beaucoup tu m'as aider même si toi t'as echouer
I'm wacth you right now because we are same problem
my rc blinks red the moment i turn it on and after a few seconds, it starts beeping. i tried pressing all three buttons but NOTHING is happening.
when connecting spark to my phone, the qr code doesnt work so use the wifi method. i can connect my phone to spark with no problem but pairing my rc to spark doesnt seem to work. please helpppp
finally i found the solution for my spark check this video completely and follow the sane steps ua-cam.com/video/if7M8y00Aa0/v-deo.html
It work's if u follow the steps properly... U have to learn first how to switch of nd switch on the drone
Your brain is not synchronizing with the power botton, thats why.
DJI had me : remove SD card then do 3 button reset on controller until annoying beeps start...then turn on drone press power button 3 seconds for beep and BAM all set.
Thank you!
that worked awesome thats wierd that sd card would do that
facing the same problem, will try that too
David Irwin thanks man
one of the best answer, thank you..
There is a issue with the hardware or something
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
you don’t need to press the on and off button so much just to turn the spark off
I'm done bro. Do not pres single that 3boton in the romote pres it's together
Thanks
Okay your jenius
We have same prblim to dji spark..
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
👌👌👌👌👍👍👍👍✌️✌️✌️✌️✌️✌️✌️✌️thanks body . It works perfectly
if you got a mobile connect drone to mobile first then launch the dji go 4 app and theres option on app to connect to the remote controller
Douglas Frior even I try that thing also but no success
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
indian talk tooooooo much....you dont need to talk 18 min for solving 1 min problem
The problem exists because a sd card has been removed with the spark on, you should put the same sd card and turn on the drone by connecting to Dji ASSISTENT 2
it works for me now i have to pair with my phone
I have same problem
this fix check plz ua-cam.com/video/if7M8y00Aa0w/v-deo.htmlorks
This thing is so inconsistent it's not fucking funny! When it does work , it works great ! I can go 250 ft high & since I live a few miles away from an airport and not fucking moron , so anything higher than that would likely take a jet motor out , seeing how a bird can do the same . I go 5000 ft out , with no issues . Getting it to connect is a totally different story!!!!!
you should keep holding the three buttons until it connects.
nope...that doesn't make a difference
You need to hold the DJI spark for 9 seconds than after you hold the 3 button and than it will turn green and it wiil restart it and you reconnected
Good
Se tivesse em português ia ajudar muito
its works iam connected
Im having the same problem and if I knew dji products were like this I would have not bothered with it. Pressing on off on off on off.. .. Is just a fukin joke!!!!
Подключи spark к телефону через dji GO 4. На улице нажми авто взлет, полетай немного. Посади его и после этого подключай пульт к коптеру.
You just did not enter the RC password,you need first to connect the Spark and RC to a smartphone and use de QR code that is located in the botton of RC.
Ohh really?
i know how to solve it. as soon as it pairs and the controller blink green and red, go to the setting and calibrate your controller. but please turn off you spark first.
Thanks
شكر
change the battery of spark
Hold it for 9 seconds the drone
Hold it 9 seconds and it should work
I dont know why not works for yourself,😬😬
SD card
Techno drones ka remote connect nahi ho raha
ua-cam.com/video/if7M8y00Aa0/v-deo.html
Hold it for 9 seconds
May be it is defective replace it
This is voodoo
it seems that this guy is not familiar to ant kind of technology.
And rhar
I don’t get it why you made this video than 🤨
just to share this problem
When he didn’t know how to turn on the drone I stopped watching smh
contact dji for that looks so frustrating
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
this fix works check plz ua-cam.com/video/if7M8y00Aa0/v-deo.html
Dude. No shade but you totally waisted 19 minutes of my life. Suggestion. Upload content that will actually help others. If you don’t know the answer please don’t was it your time going threw all of this filming and uploading just to not have the answer afterwards. #annoyed.
finally i found the solution for my spark check this video ua-cam.com/video/if7M8y00Aa0/v-deo.html
Nice video! Subbed! Check out my rc channel when you have a chance.
Lagta hai iss ka circuit short hai
Too much talking
reset kardo