Quick Guide To Polishing and Anodizing Titanium Knife Scales (Part 2)
Вставка
- Опубліковано 17 вер 2024
- If you have any question please leave a comment below. I will link everything you need below. This is a quick down and dirty to polishing and anodizing titanium.
Budget Mini Titanium Knife In This Video
amzn.to/3NzcETa
Anodizing Materials
DC Power Variable Supply 120V 3A Adjustable Regulated Switching Power Supply
amzn.to/3aG0qJP
Polycarbonate Square Food Storage Containers 4 Quart With Lid - Pack of 2
amzn.to/3xvnOTe
TEMCo Titanium Wire 16 Gauge 25 Ft Surgical Grade 1
amzn.to/3H2t8Rx
Powder-Free Nitrile Exam Gloves(S-XL), Box/100
amzn.to/3ayVK8E
Arm & Hammer Pure Baking Soda
amzn.to/3aCeHaH
Dremel 3000-1/24 Variable Speed Rotary Tool Kit
amzn.to/3Q8mXiD
45PCS Sandpaper
amzn.to/3GZ0Kj8
Whink Rust Stain Remover 32 Ounce - 2 Pack
amzn.to/3H8qFF1
Multi-Etch
www.reactiveme...
Recommended Tools and Knife Maintenance
Pro Shot Products Zero Friction Knife Lubrication
amzn.to/37OeEaN
Cotton Swabs AKA Doo Dads
amzn.to/3Klkr4I
Bitster Organizer- Flexible Bit and Fastener Organizer With Magnetic Tray by Boltster
amzn.to/3LvlvUV
Wiha Bits
amzn.to/3xovaIU
Wiha Driver
amzn.to/3KAL3iV
Work Sharp Guided Field Sharpener
amzn.to/3juRA2L
Work Sharp EDC Micro Sharpener & Tool
amzn.to/3xn7Vik
#EDC #Knives #KnifeCommunity #bestedc2022 #edccommunity #edccarry #edccommunity
#knifelife #edclifestyle #knifenut #knifeforlife #edcgearporn #knifeporn
#edcgear #pocketknives #pocketknife #pocketdump #everydaycarry #knife
I sharpen knives and I used your idea with the dremel to polish a pocket clip on my ZT0562ti and Flitz , It worked great , But I found to take it to a mirror if you want , get a bottle of 1 micron gunny juice , The juice really soaks into the wheel and it’s diamonds so it really cuts and polishes the metal it worked fantastic , you only need a very small amount
I love doing this to my knives. It's a way to customize your knife or to make an old knife look new again. I bought a Protech Malibu a while back black aluminum scales and can't stand how the black coating already looks old. I'm so tempted to get to polishing. I'm afraid it wouldn't look good. I need to learn the anodizing and I definitely would! 👍
I can't believe that $20 knife looks like that great job on it
Nice tutorial buddy 👍
Thanks JD!
Dremels are one of the best tools ever!!! Is the knife on bearings? Thanks for the video!
Yea it’s on bearings and has surprisingly good action for such a small knife. The detent is a little light, but other than that it’s great. I prefer the thumb or reverse flick over the flipper tab because of the lighter detent.
I really appreciate this! Question from a noob. If I polish only (no desire for anodizing atm), how long does a shinny Ti finish last?
Can you polish a blade with this same process to get a mirror finish?? thanks for these vids my scales turned out better than i expected
Thanks for watching. Yes you can use Flitz or other metal polish with a dremmel and put a mirror polish on a blade.
@@bladesandedc can I do it with just the soft attachment or would it be faster to use sandpaper cylinder then soft without scratching the knife? And NP! Congrats on 3k+
🫡