Carpro Lift/ High Alkaline Pre-Wash Foam/ Auto Detailing/ Car Washing/ Autoforge.net
Вставка
- Опубліковано 8 лют 2025
- Today, I’m testing out Carpro Lift. It’s a first step Pre-Wash Foam that helps loosen and remove grime and dirt before you hand wash. Check out the video for more info.
autoforge.net/...
autoforge.net/... - Авто та транспорт
I enjoyed the video. I have a similar paint color. It's been raining alot & commuter car. Valuable tips, and thanks for showing us the home setup. It also helps.
Thanks for watching!
Awesome video and product review brother
Ty
How about a foaming pre-wash showdown between CarPro Lift and Koch Chemie SuperFoam? That should get you over the 5,000 subscriber mark.
I don’t have SF and I wouldn’t know how to show the difference. SF is a higher PH and I’d suspect it’s reality strong.
We actually have this same body style RAV4, same white and everything.
Idk if it's the aerodynamics or something else but I swear the lower sides are constantly dirty and they get dirty again almost immediately.
It's annoying enough that I usually double coat that area when doing my protection.
I think it’s the tires kick up the dirt and it sits a bit higher
Nice video. Do you think you would have gotten more bite out of the product if you didnt pre-rinse first?
That’s always up in the air. Am I diluting it by pre-rinsing, yes, but at the same time I’m getting rid of loose particles that would stand in between the product and dirt. I like to just spray and let sit most the time.
@@DetailingBreakdown thanks. I haven’t tried this kind of product/technique before.
I'm with Ben. It feels like a crap shoot tbh and just depends on the type and texture of the dirt and grime you have to deal with. Right now in Utah for example a higher pH obviously helps over a straight pH neutral soap but I struggle with road salt and mineral buildup in the winter and spring so I get more bite out of carpro descale or spiking my regular soap to make it more acidic/giving a quick prespray with a water spot remover or in really bad cases I find heavily diluting super clean wheel cleaner and using it as a prespray works wonders.
I was looking into lift but seems like an APC like green start works better
Ya, more uses with APC but nice to have a soap that is dedicated
Solid product
Yes, it’s solid
How would you compare it to Koch Chemie Active Foam??
I like active foam better for the scent. This could be stronger although they seem similar.
Needs a stronger solution and/or no pre-rinse
Definitely, but it wasn’t bad for what it was
Is your car ceramic coated in this video?
Yes
Any idea how this compares to the Bilt Hamber pre-washes?
I’ve used both. Carpro lift at 4:1 vs bilthamber touch less at 1:1 and I can’t tell the difference but everyone swears by bilthamber.
Probably buy Lift as it’s easy to pick up
Have you tested oberks aps?
No
I have some just tried it not impressed 1 bet. I think these big companies like Gyeon and carpro they’re all hype. So about 2 oz.. that’s what I used 😢 it’s sad stuff bro.
Compared to what? What r u saying or have tried that’s better in your opinion?
@@DetailingBreakdown kraken 9.5 APC rinse , and 3D super pre soak . Or use apex auto wash with 3 oz kraken. But by far the best in breaking down I seen is 3D it will even pull brown out of tire. While it soaks. I even tried the Gtechniq citrus wash, and that wasn’t good at all either.
@@nachomandetailingservices1057 with Kracken ur talking APC and that’s not the same. 3D PreSoak is definitely stronger but u can’t use that often. If u want really strong try Super soap from Loch Chemie. But those r PH 12 soaps from KC and 3D. This is a 10-11 which is a bit easier in the car. Some people have actually tested this to be around a 9. More along the lines of KC Active foam. Easier on paint but with a bit of a kick.
@@DetailingBreakdown ya I’ll need to by some I have there nano manic soap. So I guess I try there other soap see what it can do
@@nachomandetailingservices1057 lol super soak is just an apc. its not ph neutral either