Don't use anything to plug the used tube. Just squeeze out a quarter inch of material and let it dry. It forms its own protective plug in the nozzle, then you grab the dried tail and pull it out when you use it next.
The Son of God Jesus Christ came down from eternity and was born of a Virgin called Mary.God manifested in the flesh He was perfect and still is perfect Never committed one Sin. Because we us humans who are created beings are very sinful and need saving from our sins because the bible says Romans 6:23 King James Version 23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord. Now the death in this verse means eternal death because sin builds a wage And the payment for our sins is eternal death in a literal fire burning hell for eternity. Revelation 21:8 King James Version 8 But the fearful, and unbelieving, and the abominable, and murderers, and whoremongers, and sorcerers, and idolaters, and all liars, shall have their part in the lake which burneth with fire and brimstone: which is the second death. Now because we have to be perfect to go to heaven and spend eternity in The kingdom of God with God not one Sin is allowed you see my friend it's not trying to be good enough to go to heaven we have to be perfect and we have a problem we all have Sin and still do Sin Romans 3:23 King James Version 23 For all have sinned, and come short of the glory of God; So we can not do any works or even Good works to save ourselves from Hell for example water baptism Going to church trying not to Sin to go to heaven being a Good person We can not do any works to remove a sin because God says it is death for the sin Because sin is transgression of the law And to go to heaven by keeping the law we must be perfect not break it at any point keep it 100 percent perfect 1 John 3:4 King James Version 4 Whosoever committeth sin transgresseth also the law: for sin is the transgression of the law. Romans 3:20 King James Version 20 Therefore by the deeds of the law there shall no flesh be justified in his sight: for by the law is the knowledge of sin. James 2:10 King James Version 10 For whosoever shall keep the whole law, and yet offend in one point, he is guilty of all. Galatians 2:21 King James Version 21 I do not frustrate the grace of God: for if righteousness come by the law, then Christ is dead in vain. John 1:17 King James Version 17 For the law was given by Moses, but grace and truth came by Jesus Christ. Ephesians 2:8-9 King James Version 8 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: 9 Not of works, lest any man should boast. Trying to be Good by the works of the law to earn heaven as a reward will fail as shown in the scriptures The only one who has ever been on the earth with out commiting one Sin was Jesus The Christ the Son of God He is God who became The Son of man the God man 100 percent God 100 percent Man And God loves us but the Sin we have God hates it because it separates us from him So Jesus Christ went to the cross ✝️ He who knew no Sin became Sin for us and was crucified on a tree and shed he's blood dieing for our Sins every single one it is finished was the last words Jesus said before he Died for the sins of the world Then he was buried and rose again the third day bodily he's alive and a living saviour he is God that can save he is seated right now in heavenly places 1 Corinthians 15:1-4 King James Version 15 Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand; 2 By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain. 3 For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures; 4 And that he was buried, and that he rose again the third day according to the scriptures: All we have to do to receive that payment onto our account is believe he did it for us that he payed for all our sins and we get forgiveness of all our sin past present And future he payed for them all. Which means When we Trust in him and believe we cannot go to hell for our sins Because we have no sins to to pay for. It's by Grace something we don't deserve not any works of any kind. God gets all the glory and no created Man will be boosting before God saying he earned heaven by he's works the bible is clear on this my friend. God is the saviour not us We are not co saviour we either believe or we don't there is too types of People unbelievers in Sin death or believers in Christ Life eternal. We can not save ourselves by our works to earn eternal life and be Justified before a holy God. Its by Grace its a Gift according to the scriptures we are Justified. Romans 3:24 King James Version 24 Being justified freely by his grace through the redemption that is in Christ Jesus: we deserve hell but thank God he made a way and its Good news he is doing the saving not us faith is not a work praise the Lord It is a one moment in time to trust In Christ alone believe he died for our sins shedding he's blood as the substitute for us on the cross and was buried showing he was dead and Resurrection showing the payment is complete to the world on the third day. Alone put your faith in Him. in God as saviour a living saviour Be Justified by the Blood of Christ hes death for our sins. God gave us grace something we don't deserve he took the death we deserve. And we get the righteousness of God by faith onto our account and all Sins removed a complete transaction saved from eternal death and receive Christ eternal life all by the Grace of God And then we can know we are going to heaven praise The Lord And we can never lose eternal Life once we have Trusted in Christ alone and believe in what he did for us on the cross. And we can know right now in time we have eternal life and no sin or bad work.Can ever change that. The life is eternal not temporary life this is the true God of the bible its salvation not probation. 1 John 5:13 King James Version 13 These things have I written unto you that believe on the name of the Son of God; that ye may know that ye have eternal life, and that ye may believe on the name of the Son of God. Ephesians 1:13 King James Version 13 In whom ye also trusted, after that ye heard the word of truth, the gospel of your salvation: in whom also after that ye believed, ye were sealed with that holy Spirit of promise, John 10:28 King James Version 28 And I give unto them eternal life; and they shall never perish, neither shall any man pluck them out of my hand. Trust in Christ Jesus to save you and believe in the Gospel and receive the gift of eternal life I urge whomsoever reads this message. And I pray Father that there heart Mind hears it and turns to God in faith alone to save them In Jesus Christ name Amen. 🙏
I’ve been doing the rubber tubing trick for about 30 years, learned it on a show called “This Old House”. I loved that show. I would love to watch every episode
Wow love how this video is made. Great tips with no unnecessary fuss like disturbing music, over-explaining, or out of place special effects. This video was actually quite therapeutically to watch (mind relaxing and I got my confidence refilled with these new tricks when I do my next maintenance /repair of the silicone around the house). Thanks buddy!
Agreed - the impact is all in the demonstration: no distracting waffle, just different techniques including a comparison between them to illustrate what can go right and wrong.
The Son of God Jesus Christ came down from eternity and was born of a Virgin called Mary.God manifested in the flesh He was perfect and still is perfect Never committed one Sin. Because we us humans who are created beings are very sinful and need saving from our sins because the bible says Romans 6:23 King James Version 23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord. Now the death in this verse means eternal death because sin builds a wage And the payment for our sins is eternal death in a literal fire burning hell for eternity. Revelation 21:8 King James Version 8 But the fearful, and unbelieving, and the abominable, and murderers, and whoremongers, and sorcerers, and idolaters, and all liars, shall have their part in the lake which burneth with fire and brimstone: which is the second death. Now because we have to be perfect to go to heaven and spend eternity in The kingdom of God with God not one Sin is allowed you see my friend it's not trying to be good enough to go to heaven we have to be perfect and we have a problem we all have Sin and still do Sin Romans 3:23 King James Version 23 For all have sinned, and come short of the glory of God; So we can not do any works or even Good works to save ourselves from Hell for example water baptism Going to church trying not to Sin to go to heaven being a Good person We can not do any works to remove a sin because God says it is death for the sin Because sin is transgression of the law And to go to heaven by keeping the law we must be perfect not break it at any point keep it 100 percent perfect 1 John 3:4 King James Version 4 Whosoever committeth sin transgresseth also the law: for sin is the transgression of the law. Romans 3:20 King James Version 20 Therefore by the deeds of the law there shall no flesh be justified in his sight: for by the law is the knowledge of sin. James 2:10 King James Version 10 For whosoever shall keep the whole law, and yet offend in one point, he is guilty of all. Galatians 2:21 King James Version 21 I do not frustrate the grace of God: for if righteousness come by the law, then Christ is dead in vain. John 1:17 King James Version 17 For the law was given by Moses, but grace and truth came by Jesus Christ. Ephesians 2:8-9 King James Version 8 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: 9 Not of works, lest any man should boast. Trying to be Good by the works of the law to earn heaven as a reward will fail as shown in the scriptures The only one who has ever been on the earth with out commiting one Sin was Jesus The Christ the Son of God He is God who became The Son of man the God man 100 percent God 100 percent Man And God loves us but the Sin we have God hates it because it separates us from him So Jesus Christ went to the cross ✝️ He who knew no Sin became Sin for us and was crucified on a tree and shed he's blood dieing for our Sins every single one it is finished was the last words Jesus said before he Died for the sins of the world Then he was buried and rose again the third day bodily he's alive and a living saviour he is God that can save he is seated right now in heavenly places 1 Corinthians 15:1-4 King James Version 15 Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand; 2 By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain. 3 For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures; 4 And that he was buried, and that he rose again the third day according to the scriptures: All we have to do to receive that payment onto our account is believe he did it for us that he payed for all our sins and we get forgiveness of all our sin past present And future he payed for them all. Which means When we Trust in him and believe we cannot go to hell for our sins Because we have no sins to to pay for. It's by Grace something we don't deserve not any works of any kind. God gets all the glory and no created Man will be boosting before God saying he earned heaven by he's works the bible is clear on this my friend. God is the saviour not us We are not co saviour we either believe or we don't there is too types of People unbelievers in Sin death or believers in Christ Life eternal. We can not save ourselves by our works to earn eternal life and be Justified before a holy God. Its by Grace its a Gift according to the scriptures we are Justified. Romans 3:24 King James Version 24 Being justified freely by his grace through the redemption that is in Christ Jesus: we deserve hell but thank God he made a way and its Good news he is doing the saving not us faith is not a work praise the Lord It is a one moment in time to trust In Christ alone believe he died for our sins shedding he's blood as the substitute for us on the cross and was buried showing he was dead and Resurrection showing the payment is complete to the world on the third day. Alone put your faith in Him. in God as saviour a living saviour Be Justified by the Blood of Christ hes death for our sins. God gave us grace something we don't deserve he took the death we deserve. And we get the righteousness of God by faith onto our account and all Sins removed a complete transaction saved from eternal death and receive Christ eternal life all by the Grace of God And then we can know we are going to heaven praise The Lord And we can never lose eternal Life once we have Trusted in Christ alone and believe in what he did for us on the cross. And we can know right now in time we have eternal life and no sin or bad work.Can ever change that. The life is eternal not temporary life this is the true God of the bible its salvation not probation. 1 John 5:13 King James Version 13 These things have I written unto you that believe on the name of the Son of God; that ye may know that ye have eternal life, and that ye may believe on the name of the Son of God. Ephesians 1:13 King James Version 13 In whom ye also trusted, after that ye heard the word of truth, the gospel of your salvation: in whom also after that ye believed, ye were sealed with that holy Spirit of promise, John 10:28 King James Version 28 And I give unto them eternal life; and they shall never perish, neither shall any man pluck them out of my hand. Trust in Christ Jesus to save you and believe in the Gospel and receive the gift of eternal life I urge whomsoever reads this message. And I pray Father that there heart Mind hears it and turns to God in faith alone to save them In Jesus Christ name Amen. 🙏
I learned the hard way about the soapy water/alcohol trick. It works by keeping the silicone from sticking, but that works both ways. That is, if during application, the silicone doesn't totally contact both surfaces, when sprayed, the liquid can get under and behind the silicone, and then it won't stick. I think that's why you see pros putting on way too much in order to ensure nothing gets under or behind it.
I am always fearful of doing new things because I think I will be unsuccessful, the info you have given in this video really helps me know that I can caulk now without making a mess and I really appreciate this! Always fantastic videos, thank you!
Nothing worse than crap music blaring through a video (not everyone will like the directors choice of music, I turn they videos off instantly, shame as well as some of the items look like they could be cool, Talk us through the build or the tips don't bombard us with soul destroying music)
@@snelgrave101 100%...it seems to be a 'thing' on youtube, to have music (normally crap music too) playing while someone is narrating a clip, I suffer with tinnitus, and having 'music' playing at the same time as someone speaks means I hear three different things, really annoying
You can honestly cut the tube, spray what you want or tool it how you may.....the real test is the size of hole on the spout end, the thrust ratio of the caulk gun and the angle/speed at which you run your bead. Smear away boys and dont forget to wipe it on your jeans🙂👍
Never had an issue, 35 years ago and old timer showed me how to use a damp tile sponge corner and my lines always are clean and professional. But more ways to do one thing are never bad to know.
I have caulked items for over 35 years and I have to admit I learned a ton of things brand new from you. Congratulations for teaching an old dog new tricks and thank you for making this video!
Though I don't know you, I respect you for this. Working 35 years in any industry would automatically grand you title of "Master" The sheer fact of you admitted that you've learned something after all those years is incredible! Hats off to you, truly. 👏
To get a perfect silicon or any other sealant line, all you have to do is press the middle finger of your left hand down on the nozzle tip as you draw it along and you pump the gun with your right hand, or vice versa. The sealant is forced well into the gap by your finger pressure and there is nothing to clean up afterwards. The only slight drawback is that you need to use both hands as you make your sealant line and occasionally this can be awkward if there is not enough room. You also have to clean your finger regularly, and you have to watch out for splinters or sharp bits in the material you are sealing, (e.g. laminates) which can nick your finger as it moves along the joint. I invented this technique and have used it for many years as a handyman and painter. It is by far the fastest and neatest way to apply sealant from a gun.
You "invented" the trick that all caulkers use to get a finished bead without taping? Its called a "speed bead", it's been around longer than we've been alive pal.
@@dee.f88 Okay, I went too far claiming I invented it. But I never learnt it from anyone. And I have to say that none of the many tradesmen that I introduced this method to over many years had heard of it before or worked it out for themselves. Which is surprising, seeing how easy and obvious it is. As for your claim that it has been around longer than we have been alive, well, maybe you but not me. Caulking guns and tube/nozzle delivered caulking materials were not in general use when I was a young man, that's for sure. It was all putty and elbow grease. Silicone? Not.
@@bernarddavis1050 your rebuttal was respectable. Valid points, a fair argument and even acknowledged your wrongdoing in the exaggerated claim of inventing the speed bead. I respect you and will not trouble you with any more unnecessary comments.
I've never heard of that technique or seen it done either, sounds like a cracking idea. I use a lot if caulk too, I wonder if it will work for that too.....
If you cut the tip perpendicular and drag it with the gun going ahead, you get a convex bead with irregularities depending on how consistent you apply pressure on the handle. If you hold the gun perpendicular to the direction of travel, you get something like a chamfer shaped bead, with better filling of the root because you can force the material directly into the corner. If you run the gun pointing slightly in the direction of travel, you get a concave bead which runs tangent into the adjacent surfaces and has the best bang for buck ratio. If you keep your pressure and the angle of the gun somewhat consistent, you always get the same cross section based on the tip shape. And the root is filled because you're pushing the material into the corner.
This guy knows. I always think the spray bottle is a bad idea as well as it runs behind the silicone then smearing it after meaning it won’t adhere properly to the tiles. Your better off using a stick that’s been soaked in washing up liquid.
@@Georgous92 Yeah never spray, only dab the tool in soapy water. And prepare the surfaces by cleaning (remove dust and grease) and maybe roughing them up a little with sanding paper if necessary, depending on the materials involved.
Yes I spend 30plus years in glass industry....learn all these triks by doing it.....only practical, wish u were thr to show it early....thx for posting such wonderful video
I have found with cauking that the key is to insure the caulk penetrates the seam. Therefore once the caulk is applied exterior pressure should be applied to the caulk to force it into the seam. I will not be critical of anyone else's methods however for me non water soluable caulks I find look the best by taping off the seam with painters tape. Applying a large bead of caulk pushing it in with my finger or a forming tool coated with windex ,keeping a waste container nearby while using paper towels to wipe excess caulk off my finger or tool and quickly disposing of the paper towels not allowing too much silicone or other non water soluable caulks to get all over me or the area I am caulking. Then pulling the painters tape working from top to bottom and disposing it in the waste container as it is pulled off in a carefull and smooth manner.For water soluable I use a damp rag and a bucket of water with some fine tools such as a nail punch and a damp cloth to neaten up the corners. I follow the same method only do not tape off surfaces except on occasion and use the damp cloth to wipe off excess. Caulk.To each there own and I am certain some of you guys are excellent free hand caulkers so I respect your technique if it works good for you and you end up with a neat and stable seam. Cleaning your caulk seam is very helpful and using alcohol for the final wipe down will help because it drys rapidly. On old tubs and wet areas cleaning thoroughly is a must before alcohol wipe down. Using a razor blade scraper or painters tool to dig out old caulk before you begin your cleaning process .Having a shop vac handy to suck all the fine debris out of the work area and the tub or drain area helps alot and taping off the drain below where you are working or covering it in some manner is always wise.
O my god, this was the BEST video on caulking I've seen! No long-ass talking while I'm waiting for someone to get to the point. And the tips are genius!, they were so in front of me, I'm mad at myself for not thinking of them. Good job!
Someone there commented in English (alguém aí comentou em inglês), e transcrevo aqui in Brazilian Portuguese: "Adoro esse jeito de mostrar. Internacional, sem palavras, apenas sinais! Boa ideia!". Top demais esse vídeo, porque qualquer povo entende, de ingleses a polinésios e hindus, em suas línguas natas!
PUSHING the bead forces material into the joining. PUSHING allows me to see the depth and mounding. PUSHING uses the shape of the nozzle to shape the bead. PUSHING creates a wide deep long-lasting moisture barrier. . This video demonstrates variations of PULLING the bead. PULLING the bead applies a surface coat, without penetration into the joining. PULLING the bead creates gaps for moisture to accumulate.
That’s the problem, to many people just dribble the silicone in gap for fear of an unclean able mess. You really got to gun it into the gap. Then knife of the excess as shown in the video. The wet finger is the final finish. One other technique I was shown to do after finishing is to throw dry tile grout over the bead.
I worked as a contractor doing in tank sealing on the global 7000 aircraft at bombardier. Really tight areas using 2 mirrors for visual, and if you messed up you just cleaned it up and re did it. I mainly worked as a structural airframe assembler drilling, riveting and that kinda stuff so mistakes were costly. Sealing is kind of therapeutic and satisfying as the kids would say. I'd just listen to music and have at it, unfortunately those kind of sealants were very carcinogenic and I worked in a gas tank essentially with Isopropyl alcohol to clean but ive used all 4 of these methods, even used mold release and created the seal on a workbench then put some seal around the point of contact and it worked great, it was just to hard to get 360 degree access when the part was installed
You can get cake decorating tools which are basically stainless balls on a little shaft so after spraying soapy water they leave a perfect consistency no matter the angle of the tool. I used it everyday for years.
Yes this or just apply silicone perfectly by having the gun at an angle and cutting the nozzle at an angle. It leaves it perfect too and is much faster, but requires some practice.
@@TheFrontyer It depends on the length of the bead and application. I used to make gfrc kitchen counter tops and the silicone had to have a perfectly consistent over many metres. Nearly impossible to get that perfect when you are physically walking along the form and having to trigger the gun a few times. Not to mention getting 4 tight matching corners.
@@Jim-yk9zw I have applied probably 20-30 meters of silicone in one stretch without issue. But that was down at the floor so smaller incosistensies are not visible unless you lay down. On a kitchen I would definetly use a tool and soapy water afterwards, as incostistensies are more visible.
@@TheFrontyer I imagine many commercial applications of siloconing wouldn't expect perfect joints even though as you said, it is possible to get it quite nice. Half the time non tradies or the clients in those situations wouldn't even know what they were looking at to expect the cleanest joint. I have seen some absolute dogs breakfasts on some sites in the past though.
Why not just use a proper caulk spatula? A ball-shaped tool only allows a specific bead size. With a proper tool, you get adjustability In spreading out the bead correctly, regardless of irregularities in the surface or your ability to apply a perfect bead.
댓글에 외국인들이 많아서 내 댓글이 의미가 있나 싶지만... 실리콘 건을 이용한 코킹작업은 기본적으로 건의 각도와 노즐을 힘조절로 품질이 결정되는 거라서 촉에 의한 품질 향상은 기대하기 어렵습니다. 초보자는 코킹작업 부위에 테이프를 붙여서 번지는 것을 막고 헤라라고 불리는 물건으로 면을 긁어 주는 것이 가장 낫습니다. 힘조절 각도 조절 안되시는 분이 저정도 퀄리티를 기대하시면 안되요.
I use a wet micro towel to run along the baseboard to pick up the mess of silicone left and my line always comes out perfect. Thank you for the other way to use silicone.
Absolutely some very great tips here! When my ex and I started building home, decks and basement remodels together he always had me do the caulking. The first time he saw me with my finger in it to spread it evenly and smoothly he about had a cow! But after checking it over and seeing how nice it looked he stopped telling me , " knock it off, you aren't here to frost cakes!" It wasn't long before l caught him with his finger in it too!" Thanks for the great tips!! Peace to all.....💜💙💜
Here's how to poke a tiny hole because the big angled hole is wrong...... now here's how yo change your calkinggun to make it cut the caulk tube exactly as I just told you not to
The first way works fine you just cut the hole too big putting too much caulk on so that it squishes out the sides of your finger. I use a case of caulk at a time painting houses.
I've been cutting the end a caulking tube on an angle for over 20 plus years and your right he did cut it to big. But it's always nice to learn new ways but ill keep doing it the old way. 💯👍
If sealing under a door/patio doors but very close to ground just force the nozzle to a 45 angle before pumping gun, if nozzle already full of silicone be sure to hold on to nozzle as you force the bend as it can shoot off its thread. Most nozzles already have tiny hole so don't even need cutting for very small gaps, then gradually re cutting as needed and squeeze out quarter inch when finished to seal the tube then just pull out the set silicone next time. If no nozzles at all and gap not too small just pump the tube along gap and tool it in. Don't keep throwing away used nozzles, when set push the silicone out with long thin screwdriver it'll pull out clean as a whistle.
After doing silicone for years I’ve learnt to just do a neat continuous bead straight from the gun, no need to splodge it around with your finger or any other tool.
The best way to seal a tube is just squeeze out a little excess at the tip and let it dry. Seals the tube . Won't last forever but it will last several weeks to a month if it's not a cheap caulk.
For years a buddy and I installed trim. He would always caulk our work to ensure quality and help the painters. I decided one day I would help out. The next day the painter pulled him aside and said : I know your buddy is trying to help, but please don't allow him anywhere near a caulk gun. It will take us hours to fix the mess he made. We still laugh about that and I'm still not allowed near a caulk gun. It's harder than it looks.
Another hack is to tape each side of where you shoot the silicone. And remove the tape after you have dragged out the silicone with your finger covered in green soap.
I’m a welder and I understand that you get better penetration when you push especially vertically. But I’ve worked so many jobs using caulk and silicone I’ve never seen anyone push they pull and than use there finger to push it
This is great. To get behind taps without a piece of hose you can stack the nozzles onto each other if you have 2 or 3 tubes/ nozzles and tap them together acting like an extension tube/ nozzle or macdonalds straw.
I only recently discovered a nozzle that you can buy. It works in a similar manner, several of them clicked together, then turned to create the desired effect. Shockingly, for a bought "gimic", it really works.
@@highgatehandyman6479 they're called "Reech flexible silicone and caulking nozzles". Only a fiver, when you need them, like you say, they're invaluable. If you're from the UK screwfix do them.
Thants for sharing, It's cool how you do it, but there are still better ways, sliding the caulking gone forward is better than pulling it away, I'm sure you understand what I'm talking about, please try it once it doesn't hurt 😊👍
If one is a homeowner and only needs to use caulking occasionally and assuming you desire to have that tube last as long as possible, whew! The you really also need to seal over the big end too. Depending on the caulking and how it's stored, this can keep the contents viable for much, much longer. Ya, I know yada yada. But take a look up the tube sometime and not infrequently you will see scrapings of caulking. This happens when you have applied pressure and sometimes a little squirts out. So this means there is no perfect seal, thus allowing oxygen to get in and that will start cause the contents to harden. By sealing off the big end after use, less oxygen can reach the pushing plug? I simply cut a section out of a shopping bag, enough to cover and extend up the outside of the tube 2" or so then use electrical tape in the middle. Try it sometime I think you will surprised.
You dont have to cut a 1/4" tip for an 1/8" gap. The angle can depend on the shape of the gap you are cutting all the way to personal preference. Only time I have ever cut the V notch in my tip is on a windshield replacement. Never in a home or commercial construction atmosphere
Oh my gosh, I used a Pampered Chef scraper and a nail file to smooth out caulk around my sink 8 years ago!! I thought my idea was genious....i guess I was a professional and didn't even know it!!
In many cases, the professional uses the push caulk method, not the pull caulk shown in this video. My experience: 30_ years in the sunroom and skylight business.
Instead of dragging the tip, and leaving a superficial bead, I use the gun perpendicular with a square cut tip, or pointing towards the direction of travel for deep joint penetration (and less in top, where it can shrink.
@@hc3d silicone is the easiest to use indoors for a high quality long lasting seal. You can use painters caulk anywhere you plan on having paint, but unpainted it will dry out and discolor. There are many construction sealants that can be used and left exposed, but none that I can think of that tool as easily as silicon. Most other sealants that will do the job are going to require a solvent such as paint thinner to tool out.
Yaaaasss!!!!!! Exactly!!!! Me toooo!!!!!!! An old painter in the trades showed me that several years ago... and I've been spreading the news and the caulk ever since...... I can caulk wall angle trim for an acoustical grid ceiling, walking stilts , around a school room. In about 2 minutes and less than 1 tube of caulk..... most guys push a baker scaffold around the room with a roll of paper towels, it takes them an hour and 4 or 5 tube of caulk... and swear they're the best caulker in the world... but thats union work ....I guess..😆
@@hc3d plumbers like Poly seamseal because it trims out quick. I often use silicone for toilet to floor seam. Alex plus over shower/sheetrock joint since it'll be painted anyways. And Dap 2.0 for heavy duty bath caulk, but needs to be trimmed and cleaned with MS or thinner, or you will have a big sticky mess to contend with.
Eu corto o bico em 45 graus e aplico, e bem preciso passar o dedo ou qualquer coisa, fica perfeito. Além de colocar a gun na posição correta para aplicação. Quando existe um obstáculo como torneira, comece a aplicar da parte de trás da torneira para as extremidades.
The most important trick that got totally overlooked is that silicone is not paintable, and you’ll have to grind it and all the residue off if you ever want paint to stick.
Ice cubes works for shaping silicone sealant, too. Want an even, thin silicone coating? Dissolve acetoxy catalyzed silicone in 1,1,1-trichlorethane and dip the item you want coated in the solution. Remove and let dry. Dip and then dry again for a thicker coating.
Great Vid! with the last one instead of using a tube like that there is a nozzle you can get that twists to the angle you need. Works great to get behind top mounted basins if its close to the wall. Alot of people dont do it and inspectors always pick up on it.
OMG, the way I was shown to caulk is the messy, huge bead, big clean up method where you end up wiping off half of what you applied. And as I recall the guy that showed me how called himself a “professional”. He must’ve worked for a caulk manufacturer. 😂
Don't use anything to plug the used tube. Just squeeze out a quarter inch of material and let it dry. It forms its own protective plug in the nozzle, then you grab the dried tail and pull it out when you use it next.
The Son of God Jesus Christ came down from eternity and was born of a Virgin called Mary.God manifested in the flesh He was perfect and still is perfect
Never committed one Sin. Because we us humans who are created beings are very sinful and need saving from our sins
because the bible says Romans 6:23
King James Version
23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord.
Now the death in this verse means eternal death because sin builds a wage
And the payment for our sins is eternal death in a literal fire burning hell for eternity.
Revelation 21:8
King James Version
8 But the fearful, and unbelieving, and the abominable, and murderers, and whoremongers, and sorcerers, and idolaters, and all liars, shall have their part in the lake which burneth with fire and brimstone: which is the second death.
Now because we have to be perfect to go to heaven and spend eternity in The kingdom of God with God not one Sin is allowed you see my friend it's not trying to be good enough to go to heaven we have to be perfect and we have a problem we all have Sin and still do Sin
Romans 3:23
King James Version
23 For all have sinned, and come short of the glory of God;
So we can not do any works or even Good works to save ourselves from Hell for example water baptism
Going to church trying not to Sin to go to heaven being a Good person We can not do any works to remove a sin because God says it is death for the sin
Because sin is transgression of the law
And to go to heaven by keeping the law we must be perfect not break it at any point keep it 100 percent perfect
1 John 3:4
King James Version
4 Whosoever committeth sin transgresseth also the law: for sin is the transgression of the law.
Romans 3:20
King James Version
20 Therefore by the deeds of the law there shall no flesh be justified in his sight: for by the law is the knowledge of sin.
James 2:10
King James Version
10 For whosoever shall keep the whole law, and yet offend in one point, he is guilty of all.
Galatians 2:21
King James Version
21 I do not frustrate the grace of God: for if righteousness come by the law, then Christ is dead in vain.
John 1:17
King James Version
17 For the law was given by Moses, but grace and truth came by Jesus Christ.
Ephesians 2:8-9
King James Version
8 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God:
9 Not of works, lest any man should boast.
Trying to be Good by the works of the law to earn heaven as a reward will fail as shown in the scriptures
The only one who has ever been on the earth with out commiting one Sin was Jesus The Christ the Son of God
He is God who became The Son of man the God man 100 percent God 100 percent Man And God loves us but the Sin we have God hates it because it separates us from him
So Jesus Christ went to the cross ✝️
He who knew no Sin became Sin for us and was crucified on a tree and shed he's blood dieing for our Sins every single one it is finished was the last words Jesus said before he Died for the sins of the world
Then he was buried and rose again the third day bodily he's alive and a living saviour he is God that can save he is seated right now in heavenly places
1 Corinthians 15:1-4
King James Version
15 Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand;
2 By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain.
3 For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures;
4 And that he was buried, and that he rose again the third day according to the scriptures:
All we have to do to receive that payment onto our account is believe he did it for us that he payed for all our sins and we get
forgiveness of all our sin past present
And future he payed for them all. Which means When we Trust in him and believe we cannot go to hell for our sins
Because we have no sins to to pay for.
It's by Grace something we don't deserve not any works of any kind. God gets all the glory and no created Man will be boosting before God saying he earned heaven by he's works the bible is clear on this my friend. God is the saviour not us We are not co saviour we either believe or we don't there is too types of People unbelievers in Sin death or believers in Christ Life eternal. We can not save ourselves by our works to earn eternal life and be Justified before a holy God. Its by Grace its a Gift according to the scriptures we are Justified.
Romans 3:24
King James Version
24 Being justified freely by his grace through the redemption that is in Christ Jesus:
we deserve hell but thank God he made a way and its Good news he is doing the saving not us faith is not a work praise the Lord
It is a one moment in time to trust In Christ alone
believe he died for our sins shedding he's blood as the substitute for us on the cross and was buried showing he was dead and Resurrection showing the payment is complete to the world on the third day. Alone put your faith in Him. in God as saviour a living saviour
Be Justified by the Blood of Christ hes death for our sins. God gave us grace something we don't deserve he took the death we deserve.
And we get the righteousness of God by faith onto our account and all Sins removed a complete transaction saved from eternal death and receive Christ eternal life all by the Grace of God
And then we can know we are going to heaven praise The Lord
And we can never lose eternal Life once we have Trusted in Christ alone and believe in what he did for us on the cross. And we can know right now in time we have eternal life and no sin or bad work.Can ever change that. The life is eternal not temporary life this is the true God of the bible its salvation not probation.
1 John 5:13
King James Version
13 These things have I written unto you that believe on the name of the Son of God; that ye may know that ye have eternal life, and that ye may believe on the name of the Son of God.
Ephesians 1:13
King James Version
13 In whom ye also trusted, after that ye heard the word of truth, the gospel of your salvation: in whom also after that ye believed, ye were sealed with that holy Spirit of promise,
John 10:28
King James Version
28 And I give unto them eternal life; and they shall never perish, neither shall any man pluck them out of my hand.
Trust in Christ Jesus to save you and believe in the Gospel and receive the gift of eternal life I urge whomsoever reads this message. And I pray Father that there heart Mind hears it and turns to God in faith alone to save them In Jesus Christ name Amen. 🙏
@@jesusisthelordsaviouralway8044 why?…. Just… why?
@@justicefor-all3129 Hell is real and only Jesus saves
@@jesusisthelordsaviouralway8044 it appears you went to school at Hogwarts
ua-cam.com/video/4cS6D-IwfW8/v-deo.html
I’ve been doing the rubber tubing trick for about 30 years, learned it on a show called “This Old House”. I loved that show. I would love to watch every episode
,😊👍👍
Wow love how this video is made. Great tips with no unnecessary fuss like disturbing music, over-explaining, or out of place special effects. This video was actually quite therapeutically to watch (mind relaxing and I got my confidence refilled with these new tricks when I do my next maintenance /repair of the silicone around the house). Thanks buddy!
Agreed - the impact is all in the demonstration: no distracting waffle, just different techniques including a comparison between them to illustrate what can go right and wrong.
The Son of God Jesus Christ came down from eternity and was born of a Virgin called Mary.God manifested in the flesh He was perfect and still is perfect
Never committed one Sin. Because we us humans who are created beings are very sinful and need saving from our sins
because the bible says Romans 6:23
King James Version
23 For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord.
Now the death in this verse means eternal death because sin builds a wage
And the payment for our sins is eternal death in a literal fire burning hell for eternity.
Revelation 21:8
King James Version
8 But the fearful, and unbelieving, and the abominable, and murderers, and whoremongers, and sorcerers, and idolaters, and all liars, shall have their part in the lake which burneth with fire and brimstone: which is the second death.
Now because we have to be perfect to go to heaven and spend eternity in The kingdom of God with God not one Sin is allowed you see my friend it's not trying to be good enough to go to heaven we have to be perfect and we have a problem we all have Sin and still do Sin
Romans 3:23
King James Version
23 For all have sinned, and come short of the glory of God;
So we can not do any works or even Good works to save ourselves from Hell for example water baptism
Going to church trying not to Sin to go to heaven being a Good person We can not do any works to remove a sin because God says it is death for the sin
Because sin is transgression of the law
And to go to heaven by keeping the law we must be perfect not break it at any point keep it 100 percent perfect
1 John 3:4
King James Version
4 Whosoever committeth sin transgresseth also the law: for sin is the transgression of the law.
Romans 3:20
King James Version
20 Therefore by the deeds of the law there shall no flesh be justified in his sight: for by the law is the knowledge of sin.
James 2:10
King James Version
10 For whosoever shall keep the whole law, and yet offend in one point, he is guilty of all.
Galatians 2:21
King James Version
21 I do not frustrate the grace of God: for if righteousness come by the law, then Christ is dead in vain.
John 1:17
King James Version
17 For the law was given by Moses, but grace and truth came by Jesus Christ.
Ephesians 2:8-9
King James Version
8 For by grace are ye saved through faith; and that not of yourselves: it is the gift of God:
9 Not of works, lest any man should boast.
Trying to be Good by the works of the law to earn heaven as a reward will fail as shown in the scriptures
The only one who has ever been on the earth with out commiting one Sin was Jesus The Christ the Son of God
He is God who became The Son of man the God man 100 percent God 100 percent Man And God loves us but the Sin we have God hates it because it separates us from him
So Jesus Christ went to the cross ✝️
He who knew no Sin became Sin for us and was crucified on a tree and shed he's blood dieing for our Sins every single one it is finished was the last words Jesus said before he Died for the sins of the world
Then he was buried and rose again the third day bodily he's alive and a living saviour he is God that can save he is seated right now in heavenly places
1 Corinthians 15:1-4
King James Version
15 Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand;
2 By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain.
3 For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures;
4 And that he was buried, and that he rose again the third day according to the scriptures:
All we have to do to receive that payment onto our account is believe he did it for us that he payed for all our sins and we get
forgiveness of all our sin past present
And future he payed for them all. Which means When we Trust in him and believe we cannot go to hell for our sins
Because we have no sins to to pay for.
It's by Grace something we don't deserve not any works of any kind. God gets all the glory and no created Man will be boosting before God saying he earned heaven by he's works the bible is clear on this my friend. God is the saviour not us We are not co saviour we either believe or we don't there is too types of People unbelievers in Sin death or believers in Christ Life eternal. We can not save ourselves by our works to earn eternal life and be Justified before a holy God. Its by Grace its a Gift according to the scriptures we are Justified.
Romans 3:24
King James Version
24 Being justified freely by his grace through the redemption that is in Christ Jesus:
we deserve hell but thank God he made a way and its Good news he is doing the saving not us faith is not a work praise the Lord
It is a one moment in time to trust In Christ alone
believe he died for our sins shedding he's blood as the substitute for us on the cross and was buried showing he was dead and Resurrection showing the payment is complete to the world on the third day. Alone put your faith in Him. in God as saviour a living saviour
Be Justified by the Blood of Christ hes death for our sins. God gave us grace something we don't deserve he took the death we deserve.
And we get the righteousness of God by faith onto our account and all Sins removed a complete transaction saved from eternal death and receive Christ eternal life all by the Grace of God
And then we can know we are going to heaven praise The Lord
And we can never lose eternal Life once we have Trusted in Christ alone and believe in what he did for us on the cross. And we can know right now in time we have eternal life and no sin or bad work.Can ever change that. The life is eternal not temporary life this is the true God of the bible its salvation not probation.
1 John 5:13
King James Version
13 These things have I written unto you that believe on the name of the Son of God; that ye may know that ye have eternal life, and that ye may believe on the name of the Son of God.
Ephesians 1:13
King James Version
13 In whom ye also trusted, after that ye heard the word of truth, the gospel of your salvation: in whom also after that ye believed, ye were sealed with that holy Spirit of promise,
John 10:28
King James Version
28 And I give unto them eternal life; and they shall never perish, neither shall any man pluck them out of my hand.
Trust in Christ Jesus to save you and believe in the Gospel and receive the gift of eternal life I urge whomsoever reads this message. And I pray Father that there heart Mind hears it and turns to God in faith alone to save them In Jesus Christ name Amen. 🙏
how are on yt. always got people thinking u wanna hear them talk for a year
This quiet process immediately rivets attention ... extremely beneficial - thank you genie !!
@@jesusisthelordsaviouralway8044 load of bollocks
I learned the hard way about the soapy water/alcohol trick. It works by keeping the silicone from sticking, but that works both ways. That is, if during application, the silicone doesn't totally contact both surfaces, when sprayed, the liquid can get under and behind the silicone, and then it won't stick. I think that's why you see pros putting on way too much in order to ensure nothing gets under or behind it.
Yeah looks good, but mold will grow. Great for pros to get repeat business. "It's your cleaning not the install."
Very effective non-verbal instruction! Most DIY vids have excessive babbling that adds nothing but distraction. Your method is superior!
Руский
I am always fearful of doing new things because I think I will be unsuccessful, the info you have given in this video really helps me know that I can caulk now without making a mess and I really appreciate this! Always fantastic videos, thank you!
Don’t be afraid to make a mess because it’s inevitable. Just keep a clean rag in your back pocket to wipe up any messes
Love this NO talking, simple and easy to follow instructional video. Thanks.
@@warwoods where are your sources from about this info? If it was your personal experience I’m sorry
The hand signals are better than words, am I right?
TOTALLY AGREE !!!! YOU'RE MY CAULK HERO!!!
Great informative video plus no weird loud music to distract the viewer while you were doing the different types of recommendations
Great video
Nothing worse than crap music blaring through a video (not everyone will like the directors choice of music, I turn they videos off instantly, shame as well as some of the items look like they could be cool, Talk us through the build or the tips don't bombard us with soul destroying music)
@@snelgrave101 100%...it seems to be a 'thing' on youtube, to have music (normally crap music too) playing while someone is narrating a clip, I suffer with tinnitus, and having 'music' playing at the same time as someone speaks means I hear three different things, really annoying
@@snelgrave101mokqkwwoodoed
Weeknd f
You can honestly cut the tube, spray what you want or tool it how you may.....the real test is the size of hole on the spout end, the thrust ratio of the caulk gun and the angle/speed at which you run your bead. Smear away boys and dont forget to wipe it on your jeans🙂👍
Brilliant!! The tube extension, coat hook hanger cap and making a tip cutter in the handle are just superb! Get may likes for those!!!
Never had an issue, 35 years ago and old timer showed me how to use a damp tile sponge corner and my lines always are clean and professional. But more ways to do one thing are never bad to know.
You're a genius, straight up. My caulking skills was your first example everytime. Thanks.
I have caulked items for over 35 years and I have to admit I learned a ton of things brand new from you. Congratulations for teaching an old dog new tricks and thank you for making this video!
Though I don't know you, I respect you for this. Working 35 years in any industry would automatically grand you title of "Master" The sheer fact of you admitted that you've learned something after all those years is incredible! Hats off to you, truly. 👏
I’ve caulked for years too. I don’t need any tools to get my bead straight I just do it straight from the gun, do you?
@@gdfggggg normally yes - 99% of the time, but once in a while I run into a special situation where I use tools or tape, or the hand squeeze tubes.
@@steveocvirek6671 I use just the gun most of the time but once in a while I might need some tape ie behind a tap etc. Always looks 98% on point.
To get a perfect silicon or any other sealant line, all you have to do is press the middle finger of your left hand down on the nozzle tip as you draw it along and you pump the gun with your right hand, or vice versa. The sealant is forced well into the gap by your finger pressure and there is nothing to clean up afterwards. The only slight drawback is that you need to use both hands as you make your sealant line and occasionally this can be awkward if there is not enough room. You also have to clean your finger regularly, and you have to watch out for splinters or sharp bits in the material you are sealing, (e.g. laminates) which can nick your finger as it moves along the joint. I invented this technique and have used it for many years as a handyman and painter. It is by far the fastest and neatest way to apply sealant from a gun.
You "invented" the trick that all caulkers use to get a finished bead without taping? Its called a "speed bead", it's been around longer than we've been alive pal.
il will try. i hate to do the silicon.
@@dee.f88 Okay, I went too far claiming I invented it. But I never learnt it from anyone. And I have to say that none of the many tradesmen that I introduced this method to over many years had heard of it before or worked it out for themselves. Which is surprising, seeing how easy and obvious it is. As for your claim that it has been around longer than we have been alive, well, maybe you but not me. Caulking guns and tube/nozzle delivered caulking materials were not in general use when I was a young man, that's for sure. It was all putty and elbow grease. Silicone? Not.
@@bernarddavis1050 your rebuttal was respectable. Valid points, a fair argument and even acknowledged your wrongdoing in the exaggerated claim of inventing the speed bead. I respect you and will not trouble you with any more unnecessary comments.
I've never heard of that technique or seen it done either, sounds like a cracking idea. I use a lot if caulk too, I wonder if it will work for that too.....
If you cut the tip perpendicular and drag it with the gun going ahead, you get a convex bead with irregularities depending on how consistent you apply pressure on the handle. If you hold the gun perpendicular to the direction of travel, you get something like a chamfer shaped bead, with better filling of the root because you can force the material directly into the corner. If you run the gun pointing slightly in the direction of travel, you get a concave bead which runs tangent into the adjacent surfaces and has the best bang for buck ratio. If you keep your pressure and the angle of the gun somewhat consistent, you always get the same cross section based on the tip shape. And the root is filled because you're pushing the material into the corner.
@Repent or you will likewise perish. Do you know anything other than your holy book? Ever read some literature about logic?
This guy knows. I always think the spray bottle is a bad idea as well as it runs behind the silicone then smearing it after meaning it won’t adhere properly to the tiles. Your better off using a stick that’s been soaked in washing up liquid.
@@Georgous92 Yeah never spray, only dab the tool in soapy water. And prepare the surfaces by cleaning (remove dust and grease) and maybe roughing them up a little with sanding paper if necessary, depending on the materials involved.
Ни хуя ты загнул
@Repent or you will likewise perish. not here mate
Yes I spend 30plus years in glass industry....learn all these triks by doing it.....only practical, wish u were thr to show it early....thx for posting such wonderful video
I have found with cauking that the key is to insure the caulk penetrates the seam. Therefore once the caulk is applied exterior pressure should be applied to the caulk to force it into the seam. I will not be critical of anyone else's methods however for me non water soluable caulks I find look the best by taping off the seam with painters tape. Applying a large bead of caulk pushing it in with my finger or a forming tool coated with windex ,keeping a waste container nearby while using paper towels to wipe excess caulk off my finger or tool and quickly disposing of the paper towels not allowing too much silicone or other non water soluable caulks to get all over me or the area I am caulking. Then pulling the painters tape working from top to bottom and disposing it in the waste container as it is pulled off in a carefull and smooth manner.For water soluable I use a damp rag and a bucket of water with some fine tools such as a nail punch and a damp cloth to neaten up the corners. I follow the same method only do not tape off surfaces except on occasion and use the damp cloth to wipe off excess. Caulk.To each there own and I am certain some of you guys are excellent free hand caulkers so I respect your technique if it works good for you and you end up with a neat and stable seam. Cleaning your caulk seam is very helpful and using alcohol for the final wipe down will help because it drys rapidly. On old tubs and wet areas cleaning thoroughly is a must before alcohol wipe down. Using a razor blade scraper or painters tool to dig out old caulk before you begin your cleaning process .Having a shop vac handy to suck all the fine debris out of the work area and the tub or drain area helps alot and taping off the drain below where you are working or covering it in some manner is always wise.
Hyy my friend
Obviously done for comedic effect...
...Or My Thesis Paper on Caulking Joints...
@DavidVJones Actually not David which may even be more funny 🤣😂🤣
O my god, this was the BEST video on caulking I've seen! No long-ass talking while I'm waiting for someone to get to the point. And the tips are genius!, they were so in front of me, I'm mad at myself for not thinking of them. Good job!
As a professional glazier....we always pushed the bead, not dragging it. Done correctly the tip flattens the bead and smoothed it out.
😊😊👍
Someone there commented in English (alguém aí comentou em inglês), e transcrevo aqui in Brazilian Portuguese:
"Adoro esse jeito de mostrar. Internacional, sem palavras, apenas sinais! Boa ideia!". Top demais esse vídeo, porque qualquer povo entende, de ingleses a polinésios e hindus, em suas línguas natas!
PUSHING the bead forces material into the joining.
PUSHING allows me to see the depth and mounding.
PUSHING uses the shape of the nozzle to shape the bead.
PUSHING creates a wide deep long-lasting moisture barrier.
.
This video demonstrates variations of PULLING the bead.
PULLING the bead applies a surface coat, without penetration into the joining.
PULLING the bead creates gaps for moisture to accumulate.
That’s the problem, to many people just dribble the silicone in gap for fear of an unclean able mess. You really got to gun it into the gap. Then knife of the excess as shown in the video. The wet finger is the final finish. One other technique I was shown to do after finishing is to throw dry tile grout over the bead.
Ideas .... make accuracy . Very good information .Thank you very much . Tamil Nadu India 🇮🇳
I worked as a contractor doing in tank sealing on the global 7000 aircraft at bombardier. Really tight areas using 2 mirrors for visual, and if you messed up you just cleaned it up and re did it. I mainly worked as a structural airframe assembler drilling, riveting and that kinda stuff so mistakes were costly. Sealing is kind of therapeutic and satisfying as the kids would say. I'd just listen to music and have at it, unfortunately those kind of sealants were very carcinogenic and I worked in a gas tank essentially with Isopropyl alcohol to clean but ive used all 4 of these methods, even used mold release and created the seal on a workbench then put some seal around the point of contact and it worked great, it was just to hard to get 360 degree access when the part was installed
Would you like to seal my car?
Almost any video without background music gets a thumbs up from me.
You can get cake decorating tools which are basically stainless balls on a little shaft so after spraying soapy water they leave a perfect consistency no matter the angle of the tool. I used it everyday for years.
Yes this or just apply silicone perfectly by having the gun at an angle and cutting the nozzle at an angle. It leaves it perfect too and is much faster, but requires some practice.
@@TheFrontyer It depends on the length of the bead and application. I used to make gfrc kitchen counter tops and the silicone had to have a perfectly consistent over many metres. Nearly impossible to get that perfect when you are physically walking along the form and having to trigger the gun a few times. Not to mention getting 4 tight matching corners.
@@Jim-yk9zw I have applied probably 20-30 meters of silicone in one stretch without issue. But that was down at the floor so smaller incosistensies are not visible unless you lay down. On a kitchen I would definetly use a tool and soapy water afterwards, as incostistensies are more visible.
@@TheFrontyer I imagine many commercial applications of siloconing wouldn't expect perfect joints even though as you said, it is possible to get it quite nice. Half the time non tradies or the clients in those situations wouldn't even know what they were looking at to expect the cleanest joint. I have seen some absolute dogs breakfasts on some sites in the past though.
Why not just use a proper caulk spatula?
A ball-shaped tool only allows a specific bead size.
With a proper tool, you get adjustability In spreading out the bead correctly, regardless of irregularities in the surface or your ability to apply a perfect bead.
Many thanks for these great tips. In the middle of caulking the sunroom, so this will help do it right the first time!
This guy is great. He’s like the Mr. Bean of the DIY world and he knows what he’s doing.
И без лишних слов.
I agree for the Mr Bean part
I just love the scolding finger. It makes me laugh. And it's very effective.
Outstanding tricks, thank you for taking the time to post the video.
Hello friend
I tried it some time ago - the function is marvelous - I guarantee it
댓글에 외국인들이 많아서 내 댓글이 의미가 있나 싶지만... 실리콘 건을 이용한 코킹작업은 기본적으로 건의 각도와 노즐을 힘조절로 품질이 결정되는 거라서 촉에 의한 품질 향상은 기대하기 어렵습니다. 초보자는 코킹작업 부위에 테이프를 붙여서 번지는 것을 막고 헤라라고 불리는 물건으로 면을 긁어 주는 것이 가장 낫습니다. 힘조절 각도 조절 안되시는 분이 저정도 퀄리티를 기대하시면 안되요.
SUPER helpful thank you! I hate caulking, total rookie here so this was fantastic to see!
It’s sure easy from something so simple to make such a catastrophic failure lol. Great video with the helpful hints!
I really enjoy the way you film the video! AWESOME!
I use a wet micro towel to run along the baseboard to pick up the mess of silicone left and my line always comes out perfect. Thank you for the other way to use silicone.
こういうのを考えれる人は常に向上心と好奇心を持ってるんだろうなと思う。
「今よりも良い方法があるはず」精神はどんどんその人を成長させますね。
Absolutely some very great tips here! When my ex and I started building home, decks and basement remodels together he always had me do the caulking. The first time he saw me with my finger in it to spread it evenly and smoothly he about had a cow! But after checking it over and seeing how nice it looked he stopped telling me , " knock it off, you aren't here to frost cakes!" It wasn't long before l caught him with his finger in it too!" Thanks for the great tips!! Peace to all.....💜💙💜
Hello my friend
@@codyhatch4607 - Gee, how are you ever going to get cancer if you don’t expose your finger skin to toxic, carcinogenic chemicals in uncured caulking?
Yeah , forcing sealant or caulking into the corners for better penetration and less air gaps seems to be the best way to get a great seal.
LIke the no fuss no face, no mouth, no music, no make up, no glamour video. Thanks from a do it yourself women.
Here's how to poke a tiny hole because the big angled hole is wrong...... now here's how yo change your calkinggun to make it cut the caulk tube exactly as I just told you not to
*7шб
@@ОльгаКижаева-н7ф s.cźf.fzxx
Iii9
@@ОльгаКижаева-н7ф 😊👍
Thanks pal , lol only a few decades too late 🤣🤣 retired now but wish I had known a couple of these tips for diy.. cool bro.😎
Alright, I just learned something here. My day is starting off on a good leg. Thank you Maker
The first way works fine you just cut the hole too big putting too much caulk on so that it squishes out the sides of your finger. I use a case of caulk at a time painting houses.
I've been cutting the end a caulking tube on an angle for over 20 plus years and your right he did cut it to big. But it's always nice to learn new ways but ill keep doing it the old way. 💯👍
yup never used anything but my finger and spit in 40+ years
Without a word being spoken this was very informative and well done, thanks
If sealing under a door/patio doors but very close to ground just force the nozzle to a 45 angle before pumping gun, if nozzle already full of silicone be sure to hold on to nozzle as you force the bend as it can shoot off its thread. Most nozzles already have tiny hole so don't even need cutting for very small gaps, then gradually re cutting as needed and squeeze out quarter inch when finished to seal the tube then just pull out the set silicone next time. If no nozzles at all and gap not too small just pump the tube along gap and tool it in. Don't keep throwing away used nozzles, when set push the silicone out with long thin screwdriver it'll pull out clean as a whistle.
😊👍
사용후 굳지 않도록 글루건 쓰는거 대박이네요. ㅎㅎㅎㅎ
저는 사용하던거 살짝 눌러서 굳게 만들고 다음 사용시 굳은것만 뜯어네고 쓰긴 하는데 저렇게도 하네요 ㅎㅎ
For the last one, if you get a long enough tube you don’t even have to bother going to the job 👍🏻👍🏻👍🏻👍🏻👍🏻
After doing silicone for years I’ve learnt to just do a neat continuous bead straight from the gun, no need to splodge it around with your finger or any other tool.
I ❤ it thanks for spending ur time here so we can use ur tricks😊😉
😊👍
Thank you… I wish I had watched this before I started…. I did a decent job… but this is perfection
Well done sir! Love your ingenuity!
Hii sir 😊🤝
Thanks for this video. I appreciate it as I know how much mastic costs.
The best way to seal a tube is just squeeze out a little excess at the tip and let it dry. Seals the tube . Won't last forever but it will last several weeks to a month if it's not a cheap caulk.
Excuse me 🤝🤝😊
Tha hand gestures... Priceless!!
For years a buddy and I installed trim. He would always caulk our work to ensure quality and help the painters. I decided one day I would help out. The next day the painter pulled him aside and said : I know your buddy is trying to help, but please don't allow him anywhere near a caulk gun. It will take us hours to fix the mess he made. We still laugh about that and I'm still not allowed near a caulk gun. It's harder than it looks.
Great video 📹 👍🏻
Another hack is to tape each side of where you shoot the silicone. And remove the tape after you have dragged out the silicone with your finger covered in green soap.
👍🏻 Perfect tips presented in the best way and independent of language.
First and foremost you don’t pull a caulk line you push it. That way it puts pressure on the caulk to enter the gap if there is any.
I’m a welder and I understand that you get better penetration when you push especially vertically. But I’ve worked so many jobs using caulk and silicone I’ve never seen anyone push they pull and than use there finger to push it
@@joshuawatts7129 yep. Pushing caulk seems ridiculous. Never seen anyone do it
Fuck it I’m going to try it
Wow good work and no talking😅😅 👍
This is great. To get behind taps without a piece of hose you can stack the nozzles onto each other if you have 2 or 3 tubes/ nozzles and tap them together acting like an extension tube/ nozzle or macdonalds straw.
I only recently discovered a nozzle that you can buy. It works in a similar manner, several of them clicked together, then turned to create the desired effect.
Shockingly, for a bought "gimic", it really works.
@@jezjukes i eould buy one if i saw it as it a very 'niche' tool that u eeally need when you need it.
@@highgatehandyman6479 they're called "Reech flexible silicone and caulking nozzles". Only a fiver, when you need them, like you say, they're invaluable.
If you're from the UK screwfix do them.
@@jezjukes good to know mate cheers.
Thants for sharing, It's cool how you do it, but there are still better ways, sliding the caulking gone forward is better than pulling it away, I'm sure you understand what I'm talking about, please try it once it doesn't hurt 😊👍
Awesome… very beautiful 👌
Fully watched 👍👍👍
I am a perfectionist. When I use silicone I tape the borders. It takes time, but the result is perfect.
Amazon sells a cover you can roll down on your cap to prevent the caulking from drying out. The ones I got are red and work exceptionally well.
I got them in my local paint store
If one is a homeowner and only needs to use caulking occasionally and assuming you desire to have that tube last as long as possible, whew! The you really also need to seal over the big end too. Depending on the caulking and how it's stored, this can keep the contents viable for much, much longer.
Ya, I know yada yada. But take a look up the tube sometime and not infrequently you will see scrapings of caulking. This happens when you have applied pressure and sometimes a little squirts out. So this means there is no perfect seal, thus allowing oxygen to get in and that will start cause the contents to harden.
By sealing off the big end after use, less oxygen can reach the pushing plug?
I simply cut a section out of a shopping bag, enough to cover and extend up the outside of the tube 2" or so then use electrical tape in the middle.
Try it sometime I think you will surprised.
Super👍👍
Genial,
헐 뭔가 포스가 느껴지고 완전 무림고수 느낌입니다. 첫영상부터 정주행 하겠습니다. 구독도 합니다. 화이팅
You dont have to cut a 1/4" tip for an 1/8" gap. The angle can depend on the shape of the gap you are cutting all the way to personal preference.
Only time I have ever cut the V notch in my tip is on a windshield replacement. Never in a home or commercial construction atmosphere
Oh my gosh, I used a Pampered Chef scraper and a nail file to smooth out caulk around my sink 8 years ago!! I thought my idea was genious....i guess I was a professional and didn't even know it!!
In many cases, the professional uses the push caulk method, not the pull caulk shown in this video. My experience: 30_ years in the sunroom and skylight business.
Hello my friend 🤝🤝
知らないTIPSもあって、勉強になった。ありがとう。
Thanks for those ideas. They will come in handy. 👍
Such a easy tutorial. Thanks I think this time around my husband would execute it perfectly. 👌🏼👍🏻🤩
Instead of dragging the tip, and leaving a superficial bead, I use the gun perpendicular with a square cut tip, or pointing towards the direction of travel for deep joint penetration (and less in top, where it can shrink.
@@gpwcowboyWhat should be used in bathrooms instead of sillicone?
@@hc3d silicone is the easiest to use indoors for a high quality long lasting seal. You can use painters caulk anywhere you plan on having paint, but unpainted it will dry out and discolor. There are many construction sealants that can be used and left exposed, but none that I can think of that tool as easily as silicon. Most other sealants that will do the job are going to require a solvent such as paint thinner to tool out.
Yes!!!!!!
Yaaaasss!!!!!! Exactly!!!! Me toooo!!!!!!! An old painter in the trades showed me that several years ago... and I've been spreading the news and the caulk ever since......
I can caulk wall angle trim for an acoustical grid ceiling, walking stilts , around a school room. In about 2 minutes and less than 1 tube of caulk..... most guys push a baker scaffold around the room with a roll of paper towels, it takes them an hour and 4 or 5 tube of caulk... and swear they're the best caulker in the world... but thats union work ....I guess..😆
@@hc3d plumbers like Poly seamseal because it trims out quick.
I often use silicone for toilet to floor seam. Alex plus over shower/sheetrock joint since it'll be painted anyways. And Dap 2.0 for heavy duty bath caulk, but needs to be trimmed and cleaned with MS or thinner, or you will have a big sticky mess to contend with.
I Am DEEPLY IMPRESSED by your MOST EXCELLENT caulking skills! 🤔😁👍🏻🥰🤗🇨🇦💖
Eu corto o bico em 45 graus e aplico, e bem preciso passar o dedo ou qualquer coisa, fica perfeito. Além de colocar a gun na posição correta para aplicação.
Quando existe um obstáculo como torneira, comece a aplicar da parte de trás da torneira para as extremidades.
I’ve been called the Queen of caulking. Thank you for the advice!
The most important trick that got totally overlooked is that silicone is not paintable, and you’ll have to grind it and all the residue off if you ever want paint to stick.
Υπάρχει και σιλικόνη που βάφεται.
Actually, you can paint the silicon with shellec and then paint anything on top on the shellec.
Polyurethane silicone is paintable…
I liked the extender that you put on your caulk, my caulk could use some extensions in times of need.
Отличные трюки! 🤗 И без слов всё понятно!
Hello sir
Ice cubes works for shaping silicone sealant, too.
Want an even, thin silicone coating? Dissolve acetoxy catalyzed silicone in 1,1,1-trichlorethane and dip the item you want coated in the solution. Remove and let dry. Dip and then dry again for a thicker coating.
Wish I'd seen this before doing the bathroom!
この方法でやってる専門家を
俺は知らない。
そして俺はやらない。
完全に同意見 普通にやるわけない
完全同意
私もこの方法でやってるシーリング工を知らないし、俺もやらない
完全にDIYレベルだよね。仕上げの品質、出来高、どっちを考えてもこの方法では「仕事」にはならない。
OUTSTANDING YOU ARE !!!! THANK YOU SIR. WELL DONE !!!!!
Muito obrigado amigo. Os brasileiros aqui o agradece. Deus o abençoe. 👏👏👏
This is perfect timing as I need to reapply silicone in the bathroom and kitchen. Thank you!
😊😊👍
😊😊👍
1:44 that is an amazing idea.
lol but still get hardened
So many great ideas here.👍....Thank you for sharing them.🙏
Muy buenas ideas, gracias
Love the ideas and the wagging finger never fails to crack me up
Me too. 😂
Cool stuff, and direct to the point 👍
Cheers.
Thanks I got New UA-cam Channel from this video to learn more knowledge and information.
Realmente útil todas y cada una de las ideas mostradas, un 10 !
Discovering. I love that way of showing. International, no words just signs! Great idea!
Sensacional. Obrigada pelo ensinamento.
This all looks great. I especially like the no music and just the noise.
Супер! Гениально!
Exellent!!! Thanks!)Good Day from the Russia!
一発仕上げでは接着力が弱いです。二度違う方向に動かして仕上げないとだめです。基本ですよ？
Great Vid! with the last one instead of using a tube like that there is a nozzle you can get that twists to the angle you need. Works great to get behind top mounted basins if its close to the wall. Alot of people dont do it and inspectors always pick up on it.
OMG, the way I was shown to caulk is the messy, huge bead, big clean up method where you end up wiping off half of what you applied. And as I recall the guy that showed me how called himself a “professional”. He must’ve worked for a caulk manufacturer. 😂
Thanks for sharing Brother...good idea...watching from Macau/Philippines..stay connected