Thank you. It worked for me. My channel 4/yaw wasn't centered and worse, can't reach 1000 nor 2000 levels. But this fixed the problem. I was on the verge of buying a new transmitter but I was fortunate to have seen this video.
Many thanks to the author for the video explanation! I've tried everything. PID changed. I was thinking about getting a new flight controller. But it turned out that it was necessary to disassemble the control panel and fix the wiring ..... Many thanks to the author for this video
I have a prob with this radio, I can’t enter the menu anymore to calibrate the sticks, even if I put the sticks to the left and turn on the radio, it will stay on the main screen.., Any ideas???
How to make the alieron and elevator mix ? For example when I turn left and right with the alieron I want the elavtor to move up aswell . instead when I turn to one side the elevator goes down and when I turn to the other side it goes up . how to make the elevator stay up when I turn both sides?
this is for mode 2 1. go to mix 2. turn on mix 1 3. set master to channel 1 4. set slave to channel 2 5. play with the percentage values until you get the movrments you want
I almost thought I had bought a faulty device... and then I stumbled upon your video. Thanks a lot man!
Thank you. It worked for me. My channel 4/yaw wasn't centered and worse, can't reach 1000 nor 2000 levels. But this fixed the problem. I was on the verge of buying a new transmitter but I was fortunate to have seen this video.
That was helpful. Problem solved. Thanks a lot!
Thank you..😍😍
Many thanks to the author for the video explanation! I've tried everything. PID changed. I was thinking about getting a new flight controller. But it turned out that it was necessary to disassemble the control panel and fix the wiring ..... Many thanks to the author for this video
Helped me a lot! thank u
Thank you. I had the same problem and solved.
Thanks 🙏 it's work for me ☺️
Thank you!!!
I juste love you 😍
Thanks brother it's working
YOURE A GENUIS THXXXX
Thank you so much!!!
💐💐
This 'hack' works perfectly - thanks
I have a prob with this radio, I can’t enter the menu anymore to calibrate the sticks, even if I put the sticks to the left and turn on the radio, it will stay on the main screen..,
Any ideas???
Thanks dude.
💐
It works .. thank you
👍👍
Thank you man,i cant tell you how happy this made me🫡👍
How to make the alieron and elevator mix ? For example when I turn left and right with the alieron I want the elavtor to move up aswell . instead when I turn to one side the elevator goes down and when I turn to the other side it goes up . how to make the elevator stay up when I turn both sides?
this is for mode 2
1. go to mix
2. turn on mix 1
3. set master to channel 1
4. set slave to channel 2
5. play with the percentage values until you get the movrments you want
hey brother i m facing issue in servo
as i move to right servo is rotating 360 degree on and on
and not even returning to centre
plzzzzzzzzzzzz help
Mine has this issue too, what was the problem in the end?
When the screws were loosened, it worked.
what did u do? you just knock it and its fix?
When the screws were loosened, it worked
Hey iam fix lots of time but this problem solv only for 3week to 1mounth
Remort eka keeyada
8500/= wage maaka.dannam 10000/= wage wai
I have the same problem with my eleron chennel🙄
my i6x tx chanel 4 problemeing😥
same problem?
@@ArtsAndCraftsSrilanka yes now solution??? i dont useing RC plane rudder 😥
Now ur throttle not full