I have EXACTLY the same equipment , so you’ve given me a perfect tutorial. The song is now stuck in my brain! Tried to learn banjo once. Less said about those efforts, the better.
This is very helpful. Thanks. I‘m awaiting the same components to build your aerobatic plane and now know exactly how to set it up. Channel 3 is a useful hint and saves me from guessing. 👍🏻
Brilliant as usual, Kendin - I am puzzled - NO binding plug used ?I am having trouble setting up a brushed speed controller to a power train, using an Fs-i6. Hope you are all safe, Den, Wales
@@Kendin-Yap Thanks for the reply,did you do a range test or you just said that based on your experience,and would I get that range without any modifications to the Radio's hardware?😄
@@Kendin-Yap What is the best EACHINE with good antenna's NAME for "MATEK Systems VTX-1G3-9 1.2Ghz 1.3Ghz 9CH" a long range video transmitter.REPLY BCOZ I HAVE WRITTEN HERE WITH HOPE..
The ESC selection is related to the needs of the engine. You should know the technical information about the motor's current and voltage and choose the appropriate ESC accordingly. Example: If the maximum continuous current value of the motor is 15A, 18 or 20A ESC is appropriate. Current capacity of ESC should be slightly higher. This ensures continuity of operation in sudden stresses and protects the ESC. It is not beneficial if the current strength of the ESC is too high, but it is not harmful too.
The first connection to the receiver is marked PPM. What is that used for? This my first plane, and I'm using Flysky RX, ESC and Receiver (IA6B). Thanks for your video. Hope you will answer my question about PPM connection. Also, what is SENS? It looks like most inputs are IBUS. Appreciate any help.
If you are not going to use a drone controller or an autopilot system with S-Bus support, you should use the traditional connection PWM outputs. (CH1, CH2, CH3 etc.) This is the case for model aircraft. S-bus provides connection over a single cable but is not suitable for model aircraft. Not applicable for S-Bus and PPM model aircraft.
Her motor için ayrı pil gerekmez. Paralel bağlantı ile tek pil kullanılabilir. Bu kumandayla her türlü modeli kullanabilirsin. Motorlar için uygun ESC olması şartıyla..
I uploaded this video in 2018. Of course, voice acting with artificial intelligence was not possible in 2018. :) I think this video, the link of which I shared, is much more understandable for beginners. ua-cam.com/video/zf1eud0LRKc/v-deo.html I may consider making an audio video translated with artificial intelligence in the near future.
Kumanda ve alıcılar genel amaçlıdır. Motora göre tercih yapılmasına gerek yoktur. ESC motora göre alınmalıdır. 24V fırçalı ESC bulmak biraz zor. 12V fırçalı bir çok çeşit bulunabilir. Kullanacağınız yere göre çift yönlü veya tek yönlü olabilir. ESC nin akım gücü motorun çektiği akımdan fazla olmalı. 775 motorların farklı güçte olanları olduğu için kaç amper çektiğini bilemiyorum. Teknik özelliklerine bakmalısınız. Eğer motor 15 amper çekiyorsa ESC en az 20-25 amper olmalı.
Merhaba, Tr de takip ettiğim sayılı insanlardansınız. DIY alanında umarıum iyi yerlere gelirsiniz. Sizden ricam kullandığınız ürünleri bulabileceğimiz güvenilir ve uygun fiyatlarını link olarak video açıklamasına ekleyebilirseniz. Giriş seviyesindeki bizler için çok yararlı olacağını düşünüyorum. Keep up !!
ESC kullanacağın motora göre seçmen gereken bir şey. Fırçalı motor için fırçalı, fırçasız motor için fırçasız ESC olmalı ve motorun akım tüketimine uygun olmalı.
thanks, I've been looking for months for a video that explained all these concepts to you. thank you. could you maybe put the ling in the description of some products? for example of the p51-d mustang rc. Hiiiiii!!!
Siteden verici kumanda ve alıcı yi aldığımızda hiçbir programa gerek kalmadan sizin baglasiginiz gibi bağlasam yön ve motor lar.calisir mi ,? Yada programla mi ayarlanması gerekiyor
Hey hi I am a huge fan of your video I have some doubts Why does my lipo battery (lemon 2200mah,11.1volt,3s,30c) spark continuously while i try to connect to my esc (30a (deans connecter)) Maybe is it because of friction I am actually making a plane And I am using the battery mentioned above and the 30a esc and 2 servos and a 2200kv brushless motor And do u have any idea of the total flight time
Poor contact causes spark. If there is a discoloration (darkening) on the metal parts of the sockets, I recommend that you replace them. Flight time is variable. Factors such as weather conditions and usage style are effective.
Yes it can be connected. You can connect the brushed ESC to one channel and the brushless one to a different channel. Or you can connect it to the same channel with a Y type extension cable. The control system cannot distinguish whether the ESC is brushed or Brushless. Both of them work with the same signal logic.
Hi new fan all d way from the Philippines. I have a question my reciever has only 2 pin which is for brushed motor but i accidentally brought a brushless and esc. the esc now is keep on beeping idk what to do because i just dont know how am i gonna put 3 pin ESC to a 2 pin RECIEVER?
It is possible to use a single servo for Ailerons (As in this video: ua-cam.com/video/Kz-v_f0BIyE/v-deo.html). If you want to use two servos, you can connect two servos to one channel with a Y-type extension cable. Another method; You can mix two separate channels. (For digital RCs)
Merhabalar benim. Sorum. Şu benim rc uçağım var ve eşleşme tamam bütün kanallar çalışıyor yanliz ön kanat kontrolleri çalışmıyor neden olabilir yada 10 kanallı bir alıcı olduğu için başka birine aktarabilir miyiz?
Selamün aleyküm. Uzaktan kumanda ile 1 adet servo , 3 adet dc motor (3-6v luk ufak motor) kontrol etmek istiyorum. Menzilin çok olmasına gerek yok evde kullanacağım. Nasıl bir sistem yapmam gerek ? Yardımcı olur musunuz ? 27mhz - 2.4 ghz yazıyor tam olarak ne anlama geldiğine de bilmiyorum.
I have EXACTLY the same equipment , so you’ve given me a perfect tutorial. The song is now stuck in my brain! Tried to learn banjo once. Less said about those efforts, the better.
How can i get this equipment in Afghanistan?
@@voiceofshinkairadio3651amazon
Don't try to bomb@@voiceofshinkairadio3651
With that music he's trying to make rc cows
This was the first helpful video I found
Thank you the manufacturer doesn't show you anything and you are the only video to show how the power hooks to receiver
çakmağındaki bayrağa kurban senin :)
Very very nice video and this is lot more helpful 🚩🚩🚩👌👌👌👌lots of love from India
OMG that is so simple and explains everything. Thanks for sharing mate
Complete newbie zero knowledge, but wanting to build rc boat. Thank you for explanation, very useful!
Excellent video, now I have to learn Banjo 👍⚘️
Cheers🎉
teşekkürler, hemen hemen tüm soruları cevaplamışsın ...şiir gibi geldi yorumları okumak ....
Sweet, simple and to the point. Thanks a ton mate!
Came here to learn how to wire up my plane but got into the music so now headed down the ole’ creek to hunt some crawdaddies with the McLennon boys.
Thank you! I couldn’t find any videos to help understand receiver contractions. This is simple and explains a lot in it.
This is very helpful. Thanks. I‘m awaiting the same components to build your aerobatic plane and now know exactly how to set it up. Channel 3 is a useful hint and saves me from guessing. 👍🏻
türkiyede senin gibi bir kanalın olmsınan gurur duyuyorum
Thank you for sharing. I am glad I found your channel! Keep up with your good job!
Awesome video ! im in the process of building a massive rc boat using a 400w trolling motor
Good video view 👍🤗 my friend
Awesome! This is what I looking for. Thank you for sharing this video!
I like it very much. And will follow you forever
Good bro💪🏻🥰👍🏻⚡. very useful video for beginners
Your subtitle is very useful please continue
thank you Kendin Yap.... this helped mee alot.
Very education for me and this free thank teach
Thanks I learned a lot!!!👍👍👍😊😊😊😊 nice video guy! I need that for my own channel
one of the best video from your's rc institution.thank you so much sir.greetings from indians.
Amazing video, thumb up
Bu adamın videoları hepmi güzel olur be
Great work as usual. Interesting music, as well: Y'all into Bluegrass?
thank you KendinYap .....your tutorial very useful ....bravo
Is het mogelijk om op de rechter stick te mengen zodat je bij het gebruik van een boot ook achteruit kan varen?
Vert good ans clear vidéo. Thank u vert much.
Very good video ! Btw im curious what kind of gadget u use fr soldering pad ? Whats is the name of it ? Thank you !
Really nice video, it's so informative to rc builders. Thanks for sharing.
Thanks Kendin Yap, is a nice and educative video. can you try and compress the videos for us next time.
এই সব বাংলা দেশে আছে
Gerekli ve açıklayıcı bir video
great simple video. thanks
Wallahi süpersiniz Allah razı olsun
You are the best
Which transmitter is better
Fsi6 or Fsi6X
PLEASE REPLY 🙏
WHAT ABOUT THE RANGE OF BOTH TRANSMITTER??????
The i6X is a newer version. 10 channel firmware installed.
There are no significant differences between the two. The control distance are the same.
hello!
Do you know how to bind a microzone E6R-E receiver on a TX16S?
In the Model Setup/ internal RF / Mode menu, you can select Futaba for the S-FHSS protocol and try it. I'm not sure but it might work.
@@Kendin-Yap I will give it try. thsnk you for answer! 고마워요~
Abi çok güzel yapıyorsun ama ben yapamıyorum çok zor.Videolarını çok beğeniyorum ellerine sağlık
Thank you for your informative videos.
What do you do if there is no screen on the original equipment?
Very Good ⭐️⭐️⭐️⭐️⭐️
Hi, Can we use 2 dc brosch motor with channel 1 and 2 rather than with only the trottle channel 3 and one dc motor ?
yes you can
Good....👍👍🤗😃
Brilliant as usual, Kendin - I am puzzled - NO binding plug used ?I am having trouble setting up a brushed speed controller to a power train, using an Fs-i6. Hope you are all safe, Den, Wales
can the brushed ESC and motor be used for rock crawlers, for moving slow on terrains? i mean can the speed be controlled?
Yes it can be used. It is usual to use brushed motor and ESC in Crawler type off-road vehicles.
@@Kendin-Yap but can it go really slow but with powerful torque ?
@@valtearalte0657 Gearbox is required for slowness and torque. This is related to the gear ratios of your vehicle.
Hey Kendin Yap love ur videos, but one thing that keeps me puzzled is what is that language in titles
Turkish
Thank you 🙏🙏
Thanks my teacher
Thanks,I will get this radio,what operatable range do you get or what estimated range do you get ?thanks😊
about 600-800 metrers
@@Kendin-Yap Thanks for the reply,did you do a range test or you just said that based on your experience,and would I get that range without any modifications to the Radio's hardware?😄
çok yararlı cidden bu konudaki videolarının devamını beklerim çok saol bilgilerini paylaştığın için
Teşekkürler.
Can i use any type of eachine for the view of live video . REPLY BCOZ I HAVE WRITTEN WITH HOPE
I could not fully understand the question.
@@Kendin-Yap What is the best EACHINE with good antenna's NAME for
"MATEK Systems VTX-1G3-9 1.2Ghz 1.3Ghz 9CH" a long range video transmitter.REPLY BCOZ I HAVE WRITTEN HERE WITH HOPE..
is a 30A better then a 20A ESC? if you dont need the power is their any reason to get it? or are their times when for a few seconds you might need it?
The ESC selection is related to the needs of the engine. You should know the technical information about the motor's current and voltage and choose the appropriate ESC accordingly.
Example: If the maximum continuous current value of the motor is 15A, 18 or 20A ESC is appropriate. Current capacity of ESC should be slightly higher. This ensures continuity of operation in sudden stresses and protects the ESC. It is not beneficial if the current strength of the ESC is too high, but it is not harmful too.
Can we bind the receiver to the mobile. We can control with the mobile.they have any app application.?
Can you set up a servo and a receiver without the motor connected to the ESC
This is simple. You can use the receiver with an external battery. No need for ESC. A 5-6v battery is suitable.
@@Kendin-Yap thankyou for the fast response. I will be sure to take that into account
Is there a problem if I have to use a brushless motor with a voltage of 11.1 V? Is it enough just to replace the battery and ESC? Thanks .
No problem with 3S (11.1V) ESC, 3S battery and 3S supporting motor.
@@Kendin-Yap Thank you for info.Regards.
Btw, power supply to rx must be 4-8.4 volts ?
Yeees exactly what I need thx bro
what an idea
i like it
keep it up! ❤
😀👍grazie ciao
The first connection to the receiver is marked PPM. What is that used for? This my first plane, and I'm using Flysky RX, ESC and Receiver (IA6B). Thanks for your video. Hope you will answer my question about PPM connection. Also, what is SENS? It looks like most inputs are IBUS. Appreciate any help.
If you are not going to use a drone controller or an autopilot system with S-Bus support, you should use the traditional connection PWM outputs. (CH1, CH2, CH3 etc.) This is the case for model aircraft. S-bus provides connection over a single cable but is not suitable for model aircraft. Not applicable for S-Bus and PPM model aircraft.
Super 👌
wow i love it
This video is very much useful for me.Liked the video.Thank u very much for uploading this video.
Tolles Video 👍 Thx
Well done!
What motor and Esc are there? I will like to order them. Tq
ua-cam.com/video/WsfKVZ2SSIk/v-deo.html - It's the same equipment I used in this video. There are related links below the video.
mrb her motor için ayrı ayrı pilmi takıcaz birde 27mhz teknemi bu kumandaya donusturebilirmiyim teknemin kendi motorlarını kullanıcam 12 volt motorlar
Her motor için ayrı pil gerekmez. Paralel bağlantı ile tek pil kullanılabilir. Bu kumandayla her türlü modeli kullanabilirsin. Motorlar için uygun ESC olması şartıyla..
Thank you sooo much
Where can I find the plugs to soldering? Tnks =)
There are links to the materials below my videos on RC airplane construction.
Hello kendinyap how can I connect two or more brushless motor to one battery
You can make an adapter cable to connect the battery inputs of the ESCs in parallel or you can get a ready one.
Was very helpful wish you did audio of you or a ai talking so we can understand more during what it is your doing
I uploaded this video in 2018. Of course, voice acting with artificial intelligence was not possible in 2018. :)
I think this video, the link of which I shared, is much more understandable for beginners. ua-cam.com/video/zf1eud0LRKc/v-deo.html
I may consider making an audio video translated with artificial intelligence in the near future.
Can I put the DC motor on another channel so that it rotates (clockwise and counterclockwise)?
Yes it is possible
but in motors with brushed brushes brushed brushes do brushes wear out? That is, if the charcoal is consumed the engine is to be thrown away? 🙄
Hocam elinize sağlık esc yi aradan çıkarsak batarya ve alıcı ile servo motor calisirmi
Evet. ESC motor için gereklidir sadece. Direk 5 veya 6 voltluk bir batarya ile kumanda sistemi çalışır.
Teshekkurler!
12v-24v fircali 775 icin hangi alici ve ESC tavsiye ederrsiniz ?
Kumanda ve alıcılar genel amaçlıdır. Motora göre tercih yapılmasına gerek yoktur. ESC motora göre alınmalıdır. 24V fırçalı ESC bulmak biraz zor. 12V fırçalı bir çok çeşit bulunabilir. Kullanacağınız yere göre çift yönlü veya tek yönlü olabilir. ESC nin akım gücü motorun çektiği akımdan fazla olmalı. 775 motorların farklı güçte olanları olduğu için kaç amper çektiğini bilemiyorum. Teknik özelliklerine bakmalısınız. Eğer motor 15 amper çekiyorsa ESC en az 20-25 amper olmalı.
KendinYap ✊✊
Merhaba, Tr de takip ettiğim sayılı insanlardansınız. DIY alanında umarıum iyi yerlere gelirsiniz. Sizden ricam kullandığınız ürünleri bulabileceğimiz güvenilir ve uygun fiyatlarını link olarak video açıklamasına ekleyebilirseniz. Giriş seviyesindeki bizler için çok yararlı olacağını düşünüyorum. Keep up !!
Çok güzel bir video abi eline sağlık, bu devre kaç tl ye mâl oldu sana bilgi verebilir misin?
Abi o esc yerine herhangi bir 30a fırçasız esc kullansam olurmu ucuzlardan; Çok ısınırmı
ESC kullanacağın motora göre seçmen gereken bir şey. Fırçalı motor için fırçalı, fırçasız motor için fırçasız ESC olmalı ve motorun akım tüketimine uygun olmalı.
Super!Teshakyr ederem!
how to connect throttle front and back both? in brushed motor
What is the max distance the transmitter can be from the receiver?
1500 meters
thanks, I've been looking for months for a video that explained all these concepts to you. thank you.
could you maybe put the ling in the description of some products? for example of the p51-d mustang rc. Hiiiiii!!!
sorry i didn't see the link
I recommend you a rc plane that I have always loved. I hope it beats you. It is the f86 saber rc. hiiiiiiiii.
look I pay you for this video !!!😂😂😂😂
Siteden verici kumanda ve alıcı yi aldığımızda hiçbir programa gerek kalmadan sizin baglasiginiz gibi bağlasam yön ve motor lar.calisir mi ,? Yada programla mi ayarlanması gerekiyor
Kumandalarda programlama yapılmaz. Basit ayarlar yapılır sadece. Menüsüne biraz alışmak gerekebilir.
Hey hi
I am a huge fan of your video
I have some doubts
Why does my lipo battery (lemon 2200mah,11.1volt,3s,30c) spark continuously while i try to connect to my esc (30a (deans connecter))
Maybe is it because of friction
I am actually making a plane
And I am using the battery mentioned above and the 30a esc and 2 servos and a 2200kv brushless motor
And do u have any idea of the total flight time
Poor contact causes spark. If there is a discoloration (darkening) on the metal parts of the sockets, I recommend that you replace them.
Flight time is variable. Factors such as weather conditions and usage style are effective.
@@Kendin-Yap oh ok 👍 thank you very much
Bro can we connect brused and brushless moter at a time to reciver with two (ESC)s
If we can pls make a vedio
Yes it can be connected. You can connect the brushed ESC to one channel and the brushless one to a different channel. Or you can connect it to the same channel with a Y type extension cable. The control system cannot distinguish whether the ESC is brushed or Brushless. Both of them work with the same signal logic.
Bro my daubt is that two brushless moters can connect to two channels with two speed controllers
Because iam making a rc dump truck
Please help me
Why don't you give reply
Hi new fan all d way from the Philippines. I have a question my reciever has only 2 pin which is for brushed motor but i accidentally brought a brushless and esc. the esc now is keep on beeping idk what to do because i just dont know how am i gonna put 3 pin ESC to a 2 pin RECIEVER?
buy a new receiver what brand you use
Me.puedes enviar el link del controlador de velocidad . Para motor DC. Porque no puedo abrirlo en la descipcion
The 1 channel is for turning by wings so it need two servo but there is one servo only connected how to connect two servo
It is possible to use a single servo for Ailerons (As in this video: ua-cam.com/video/Kz-v_f0BIyE/v-deo.html). If you want to use two servos, you can connect two servos to one channel with a Y-type extension cable. Another method; You can mix two separate channels. (For digital RCs)
Could you send a purchase link for this control and parts? Because I want to make this control plane my circuit
You can check my RC airplane videos. There are links in the description box below those videos.
Hey, is this version of 180 motor that you have used here good enough to propell 200 gram of model ?? I'm using two such 180 motors
One of them provides approximately 160-170gr of thrust.
Merhabalar benim. Sorum. Şu benim rc uçağım var ve eşleşme tamam bütün kanallar çalışıyor yanliz ön kanat kontrolleri çalışmıyor neden olabilir yada 10 kanallı bir alıcı olduğu için başka birine aktarabilir miyiz?
Sir Bina ESC se motor run karega
Amigo qual o maior motor brushless que posso usar nesse esquema? Da pra usar um de bicicleta?
dear sir, please make video about RC Volantex Exmitter EX7 thanks
Super Video Yeni videolar bekleriz 10 numara 5 yildiz
Selamün aleyküm. Uzaktan kumanda ile 1 adet servo , 3 adet dc motor (3-6v luk ufak motor) kontrol etmek istiyorum. Menzilin çok olmasına gerek yok evde kullanacağım. Nasıl bir sistem yapmam gerek ?
Yardımcı olur musunuz ?
27mhz - 2.4 ghz yazıyor tam olarak ne anlama geldiğine de bilmiyorum.
how do you set the radio setup to get full speed on tharot
Kolay gelsin elimde liion 18v 2.5 amper şarjlı matkap aküsü var ve 16v fırçalı sarjli matkap motoru buna esc nasil bağlarım