Hands down the best viper cut I've seen yet. The straight line cuts that many folks do give that "turtle beak" look from the side profile, which I can't stand. Only thing keeping me from doing this now is deciding whether I'm just going to do a full front bumper instead of a low-pro.
Did this cut to mine this weekend. Looks great! And that black trim is the stuff to use. I put the barbed side to the back. You want to make sure to push it all the way on. It resists but gives a kind of satisfying slide when it finally goes all the way on. Really feels like it’s not going anywhere. Thank you for the walkthrough.
This is a really tastefully done viper cut, ive never seen anyone do it this way where it doesnt look like someone just cut it at home. ill definitely do this when I get my 4runner
Great mod! A bit pricey but the Rago Aqua Tank is a washer fluid reservoir replacement that mounts behind the grille of a 5th gen 4Runner. It's built like a "tank" from aluminum. Takes about 10 minutes to install. It was designed to solve the problem of the plastic factory washer fluid tank being exposed in these types of mods.
Awesome cut. Without high clearance metal sides like C4 does the fender vibrate at all at high speeds? Just want to make sure the fender is still supported at speed before I cut mine. Thx
That looks great! I don't have the tools, nor do I trust myself to do this haha. I REALLY love this look and want it on my 4runner. Hope the car shops near me can do this. If not I'm gonna have to drive up to BC and pay you to do it LMAO.
@@T4Rgarageattempted mine today using your video but couldn't get the measurements on both sides to match up. Having black paint makes the body line a little harder to see. Gave up and need to retry tomorrow. That curve you put in is hard to replicate from just the video. Printable template would be nice.
My tip is to just tape off a section on the very bottom of the bumper that's gonna be cut off anyway and do some practice runs. Do not go right into your main cut. It almost wants to jump a little.
Hmm. I like the look of the curve, but Victory 4X4 makes a bumper and wing protector combo that I want and they have dimensions I’d have to follow to fit the wings
Nice video buddy,Are you open to doing a product review that related to Auto led lighting?we would like to reach out to you for doing that , but I didn’t find available info to contact you
I installed the same body armor bumper as you and now I’m planning on doing the viper cut. On the driver side there are two bolts in which the plastic bumper is attached to on the bottom. It’s attached to the bracket that body armor provided. Looks like one of the two bolts will remain to keep the bumper attached. My question is, once the cut is done, did you have to cut the bracket a bit since the 2nd bolt on it will no longer be needed because it’s bolted to a part of the bumper that’s been cut?
Body armor hiline bumper with a dual row 20” light bar. The bumper is on sale right now $100 off. The light bar is a rough country. Had the setup over a year and both the bumper and light bar have been fantastic
Hey i stopped and chatted with you today infront of ur work. Asking about your wheel and tire combo! How random that i found your video on here same day. Anyway just wondering ware you got that black trim u put on after u cut it. What lift did you use?
Crazy!! What are the odds haha I left an Amazon link in the description to where I purchased the trim. I did the old man emu 3” lift, Cap-it has it with free shipping
Hands down the best viper cut I've seen yet. The straight line cuts that many folks do give that "turtle beak" look from the side profile, which I can't stand. Only thing keeping me from doing this now is deciding whether I'm just going to do a full front bumper instead of a low-pro.
Fantastic! Would love to see full side profile, as it's the one thing that's keeping me from doing this mod.
Did this cut to mine this weekend. Looks great! And that black trim is the stuff to use. I put the barbed side to the back. You want to make sure to push it all the way on. It resists but gives a kind of satisfying slide when it finally goes all the way on. Really feels like it’s not going anywhere. Thank you for the walkthrough.
This is the best viper cut I've seen. Thanks for posting it, and also thanks for linking all the equipment and tools you need.
Fantastic! Would love to see full side profile !
This is a really tastefully done viper cut, ive never seen anyone do it this way where it doesnt look like someone just cut it at home. ill definitely do this when I get my 4runner
Just got my 24 4Runner OF. This is exactly what I want to do. Thank you!
Great content man. Loved the work and how you explain little things like making tiny cuts vertically instead of just following the tapped line.
I do like that viper cut, nice job.
This is the best viper cut out there!! 💪🏽
Beautiful look. On my way to do mine this weekend, on 2008 Pathfinder. Thanks.
Yeah you're right. That looks better than most. Hello from BC!
Thanks for the tutorial!!! Did mine today 🙌🏻
Hope it turned out good 👍🏼 Cheers!
Great mod! A bit pricey but the Rago Aqua Tank is a washer fluid reservoir replacement that mounts behind the grille of a 5th gen 4Runner. It's built like a "tank" from aluminum. Takes about 10 minutes to install. It was designed to solve the problem of the plastic factory washer fluid tank being exposed in these types of mods.
Those Rago Fab tanks are a really option too. Thanks man!
Nice cut. Definitely better with some curvature in the cutline. Well done!
I am so tempted to do this, perfect cut
Simple, yet great mod. Thanks for the video
Good to meet you buddy! I look forward to hearing you use that mic!!! 😉
Good to meet you as well! Thanks for the killer mic brother 🤙🏼
Damn !!! That really looks good Great job
that looks dope. great content. 🔥
Looks sweet.
Awesome cut. Without high clearance metal sides like C4 does the fender vibrate at all at high speeds? Just want to make sure the fender is still supported at speed before I cut mine. Thx
Great lines - got me thinking abt it
I thought about it for a very long time...
That looks great! I don't have the tools, nor do I trust myself to do this haha. I REALLY love this look and want it on my 4runner. Hope the car shops near me can do this. If not I'm gonna have to drive up to BC and pay you to do it LMAO.
You should make a template that's a nice cut
I like that idea!
@@T4Rgarageattempted mine today using your video but couldn't get the measurements on both sides to match up. Having black paint makes the body line a little harder to see. Gave up and need to retry tomorrow. That curve you put in is hard to replicate from just the video. Printable template would be nice.
Great job on the video! Thanks for making it.
Perfect! Looks so good!
This is by far the best viper cut I’ve seen. Curios what speed do you have the dremmel set to when you were cutting.
Thank you! I think it was set to max or slightly below max
My tip is to just tape off a section on the very bottom of the bumper that's gonna be cut off anyway and do some practice runs. Do not go right into your main cut. It almost wants to jump a little.
Other issue with viper cut is a small hit on mpg, especially if you drive a lot at hwy speeds.
Nice job-thanks for sharing.
Looks great man!🤘🏼
Hmm. I like the look of the curve, but Victory 4X4 makes a bumper and wing protector combo that I want and they have dimensions I’d have to follow to fit the wings
Want to see more of the passenger side where the water bottle is
Very nice cut like it a lot
Goddamn that looks good as fuck and you made it look very easy
After doing this does it expose the bumper and have a possibility of creating rust ?
Alright that looks fire
It looks sick, I wonder how it would look with the stock bumper and no C4 attachment.
Thank you! I think it would look pretty good. Looks the best with a lift and slightly wider wheels
Great content here, love the curve on the Viper cut. Im looking to do the same, any chance you would take on a project? Thanks Jaime
Nice video buddy,Are you open to doing a product review that related to Auto led lighting?we would like to reach out to you for doing that , but I didn’t find available info to contact you
It drives me crazy that I don’t have the cajones to do this to my forerunner!
It’s just a little extra skin your cutting off. It’ll turn your “forerunner” into a 4runner 🤙🏼
Hey man! Looking to do this cut on my 4Runner due to rubbing after upgrading my tires. Wanted to know what your tires are? Mine are 305/70/17
I have 285/70/17s with 0 offset wheels
Thanks man! Hopefully this cut will help with rubbing.
Does your 4Runner have suspension?
looks great! are you northern midwest or canada?
From PNW Canada
@@T4Rgarage ah, that’s it. less harsh Minnesota usually means Canada. just got a 4runner and binging your vids. great content!
@@stevenpeterson8444 thank you! 🙏🏼
I installed the same body armor bumper as you and now I’m planning on doing the viper cut. On the driver side there are two bolts in which the plastic bumper is attached to on the bottom. It’s attached to the bracket that body armor provided. Looks like one of the two bolts will remain to keep the bumper attached. My question is, once the cut is done, did you have to cut the bracket a bit since the 2nd bolt on it will no longer be needed because it’s bolted to a part of the bumper that’s been cut?
@@mauizzyadventures25 Yes I did have to cut part of the body armor lower mount as it was no longer needed
@@T4Rgarage ok thank you.
Great video.
What bumper and bumper lights do you have?
Body armor hiline bumper with a dual row 20” light bar. The bumper is on sale right now $100 off. The light bar is a rough country. Had the setup over a year and both the bumper and light bar have been fantastic
@@T4Rgarage thx!!
What trim did you use for the bumper after the cut to protect the bumper?
Link in videos description
Hey man, you think you’ll ever change your hood to the TRD one with the hood scoop?
I do like the look but I doubt it
What did you do with the bracket on the driver side? Did you cut it off?
Yes you will have to. Hit it with some primer and black paint once you chop it. Mine was already off since I have an aftermarket bumper
doesn't the viper cut leave the stuff underneath expose like the washer fluid?
Gee I wonder where I heard that recently? Oh yeah…..he talked about that in the video. 🤣😂. Did you even watch it?
What size wheel/tire are you running?
17 inch wheels 285/70 r17
@@T4Rgaragedid you have to re-gear with current tire size?
@@lcatalla7292 Not usually necessary with this size but with all the weight I’ve added I probably should
EZ Lock pronounced “Easy Lock”
Why not get an ARB bumper? There is no shortcut to greatness...
Nice work, but "sexiest, curvaceous "? Too cringe.
Women are sexy & curvaceous, not a plastic cut on a vehicle. 😅 sheesh!
😂
Hey i stopped and chatted with you today infront of ur work. Asking about your wheel and tire combo! How random that i found your video on here same day. Anyway just wondering ware you got that black trim u put on after u cut it. What lift did you use?
Crazy!! What are the odds haha I left an Amazon link in the description to where I purchased the trim. I did the old man emu 3” lift, Cap-it has it with free shipping
@@T4Rgarage perfect thanks alot