Can you make a full detail video of how you did the swap and cost? I want to do this but have no experience and don't wanna have to pay a shop to do it. I love your truck!
Not sure if you found your answer. but the stock rear ends in these can handle the 1uz even under stress. a guy name Nelsondrifts has a 1uz toyota drift truck with the stock rear end. and he sends this thing HARD and I think only snapped an axle once? id say its worth the risk until it snaps than go a 8.8 ford rear end or similar
I’m just seeing this my guy. But like @kieran Abbey said, the stock drivetrain is solid. Of course, up to a point. This truck is a 94, but I was ran off the highway before and I ended up needing a new frame as the 94 Frame was bent. The cab and bed are both 94 sitting on a 89 frame. The previous owner had it welded. It locks up great, and hooks well. The truck would do a better jump off the line with wider tires but I haven’t had any issues as at. The transmission is a w58 that I cop for $200 from a guy on fb 😂😂 That was back in 2016 what first build the truck. It’s 2022 and we are still good. I’m taking the truck to a new level here in a few month so I’ll probably be loosing the rear end. But Thats just because I want a better top end speed.
@@John-co2yz got it a long time ago when I first built the truck, don’t have it on file anywhere anymore, but they are all over eBay. Just make sure you get the proper length
W58 for now, custom adaptor plate. When I got my engine I told the seller to send me the auto bell housing for the engine. The adaptor plate is mounted to the back of that bell housing
You will for sure need an Engine and transmission, some custom engine mounts, and then source out a cooling setup that will work for you. Minor exhaust mods, minor electrical mods.
Heeelll!! Yeah bro, esta perra tu trokita, have you ever think of putting the roll pan in the bed? I put some 4Runner 93 mud flaps on my 95 hilux they look great if you like JDM style and 2002 celica GTS seats the fit good but you have to cut a little the of the seat....congratulations bro you made a awesome ride.
This is 1 sweet Toy the 1UZ sounds awesome.
What front end are you using? 4runner?
Thankyou for sharing ❤
Nice vid full set up video would be sick
Any info on the wheel and tire set up??
Can you make a full detail video of how you did the swap and cost? I want to do this but have no experience and don't wanna have to pay a shop to do it. I love your truck!
Might be my next video
@@Mr.GS-147 would be awesome if you did!
Can we get a video of that awesome exhaust setup
Great idea! I can definitely do that in the next vid
Can available in Pakistan and how much cost in pakistan
What bed cover are you using? I want one for mine
What year is this
What exhaust are you running, sounds beautiful, the muffler set up is what I'm more interested in tbh😅
Toyota for sale? Would you ever part with it?
What front bumper you running?
Could use 2 or 3 more exhaust pipes
Sick mini! Question what wheels n size? 15x10?
Black rock wheels and yes, 15x10 all around
P.A.L hey man I really appreciate the reply, thanks/respect 👌🏻
Flat Ryder's anytime!
@@Mr.GS-147 what size tires are you running? Im in the middle of deciding between 205/50 and 205/55
What year is it? Its awesome btw.
Woby 117 it’s a 94, and thanks
Nice set up man! I’ve got a 92 pick up that I want to 1uz swap as well. What transmission/ rear end are you running? The stock?
Not sure if you found your answer. but the stock rear ends in these can handle the 1uz even under stress. a guy name Nelsondrifts has a 1uz toyota drift truck with the stock rear end. and he sends this thing HARD and I think only snapped an axle once? id say its worth the risk until it snaps than go a 8.8 ford rear end or similar
I’m just seeing this my guy. But like @kieran Abbey said, the stock drivetrain is solid. Of course, up to a point. This truck is a 94, but I was ran off the highway before and I ended up needing a new frame as the 94 Frame was bent. The cab and bed are both 94 sitting on a 89 frame. The previous owner had it welded. It locks up great, and hooks well. The truck would do a better jump off the line with wider tires but I haven’t had any issues as at. The transmission is a w58 that I cop for $200 from a guy on fb 😂😂 That was back in 2016 what first build the truck. It’s 2022 and we are still good. I’m taking the truck to a new level here in a few month so I’ll probably be loosing the rear end. But Thats just because I want a better top end speed.
I have a 91 with a 302 in it. Not as nice as this but it's just a fun lil truck
What brand window visors are those? And where to get? Thanks!!
The ones on eBay are AVS brand for full length visors. Liked how yours is only halfway/only the top side of the window.
Not sure the brand but it’s off eBay
@@Mr.GS-147 Thanks for the response. Is there any link of the visors on eBay?
@@John-co2yz got it a long time ago when I first built the truck, don’t have it on file anywhere anymore, but they are all over eBay. Just make sure you get the proper length
Broth, i have the same pickup and i want to add a front lip, wich one you use in that truck?
92 4Runner
What transmission are you using and where did you the bell housing?
Trying to get my swap going and need some advice on getting everything I need.
W58 for now, custom adaptor plate. When I got my engine I told the seller to send me the auto bell housing for the engine. The adaptor plate is mounted to the back of that bell housing
You got an IG for this?
Hey bro I wanna know what are u lowered on????
Belltech drop spindles up front, 2.5", and 4'' blocks in the rear
What parts do you need in order to make this swap happen? Need some advice
You will for sure need an Engine and transmission, some custom engine mounts, and then source out a cooling setup that will work for you.
Minor exhaust mods, minor electrical mods.
P.A.L do you need a different diff, axles, driveshaft, etc?
Nice build
How much, take my money bro
What kind of seats are those bro?
4Runner OE buckets
Heeelll!! Yeah bro, esta perra tu trokita, have you ever think of putting the roll pan in the bed?
I put some 4Runner 93 mud flaps on my 95 hilux they look great if you like JDM style and 2002 celica GTS seats the fit good but you have to cut a little the of the seat....congratulations bro you made a awesome ride.
Ooo 1 more question...where did you get the lip for your 4Runner front bumper???
Yeah I did give it a thought, but I was wanna do a defuser Bach there so I’ll have to see if I can kill the bird with on stone. The lip is an eBay lip
Got a paint code? Looks like Dodge Destroyer
Dope asf
Woooooooooow man