Bifold door repair - Bottom Pivot
Вставка
- Опубліковано 12 лип 2014
- Updated 2022/08/17 This is how to repair the split wood or worn out hole at the lower part of a bifold door where the bottom pivot is. I have 2 videos on this. One glues the adjuster socket to the aluminum strap. The other video uses a locknut in place of the plastic adjuster socket. See the links below.
The 1" aluminum strap I used is on the HomeDepot.com website under - Home\Hardware\Metal Stock\Flat Bars
If you need replacement parts, ACE hardware and True Value may have a better selection of bifold door hardware. They should also have the aluminum strap.
The clear glue is Amazing Goop. They make about 6 different kinds. I always buy the Marine version because it's UV resistant. I use it for tons of projects. Only problem I have with it is that the lids SUCK!!! Just lightly tighten it or it'll split. I also put mine in an old tennis ball container to protect it from accidental puncture. About the only local store that I've found to sometimes carry it is West Marine. So I started ordering it on amazon. You can look at the specs on... eclecticproducts.com/product/...
"Running Hills" pointed out that you can use a Simpson Strong-Tie Item #LSTA12 instead of the aluminum strap. It is a 1-1/4 in. x 12 in. 20-Gauge Strap. He said it was maybe 1/8" too wide so he keep the excess inside (facing the closet).
Bifold door repair videos
-----Top pivot - • Bifold door repair of ...
-----Bottom Pivot - • Bifold door repair - B...
-----Bottom Pivot (using a locknut) - • Bifold door repair of ...
-----Top Roller - • Bifold door repair - T...
=========================
Just tags below this point
bi fold door repair,
bi fold door bottom pivot repair,
how to repair a bi fold door bottom pivot,
bi fold door hardware kit,
bifold, bi-fold,
pin, hardware kit,
how-to, how to, DIY, homemade, home made, do it yourself, fix, repair, broken, replace, adjust, install,
hardware, store,
home improvement projects,
doors, closet, folding, heavy duty,
brackets, interior, pocket, hinges,
I, can you, one, a
Fixpro256 f1i1x1p1r1o1
HowToAutoRepair h1t1a1r1 - Навчання та стиль
Here are links to all my bifold door videos
----- Top pivot - ua-cam.com/video/xlbAffsfNr4/v-deo.html
----- Bottom Pivot - ua-cam.com/video/ycOWj96iO0s/v-deo.html
----- Top Roller - ua-cam.com/video/disnVTOVte8/v-deo.html
----- Bottom pivot using a locknut - ua-cam.com/video/duVzsVPJ7EA/v-deo.html
I am probably the least handy guy around, but I followed your directions and it worked perfectly on my bedroom closet door. Thank you so much for making it so simple.
thank you! I'm a DIYer and I've never done this before, but you make it seem easy. I will be fixing my closet this weekend!
This was awesome! I saved a ton of money, I had to fix 4 doors. Was going to buy new ones, but fixed them all for $35 or so in tools and supplies and they work better than ever!
Thanks so much. I was going to buy another door, glad you put this up saved me a lot of money.
Thanks for the upload. I've used this fix to just about everyone of my bi-fold doors. It works great every single time. I have subscribed to your channel.
Thanks a million, my door had a worn out hole and this is a nice do it yourself quick fix rather then but a new door.
Just used your method on a bedroom door and it work perfectly. Thanks for the directions.
Great video! Thanks for saving me the cost of replacing the doors !!!!!
Thanks! That was exactly what we needed to repair our closet door. You made it look easy and it was!
great video. I just purchased a louver/panel bifold door, and will put a strap on the bottom. Thank You. I'm also considering putting L-brackets on each corner, and maybe putting door hinges on the side to take the weight off the round pivots. Thanks again
Thanks for the tip!!! I used your advice and worked like a charm!
Great fix I’ve got me a 6’ length of aluminum 1/16 X1” flat bar cut out enough to fix 3 doors thanks!
Thanks a lot, You save me money and time for buying a new door. Really appreciate.
mowmowyu yu Glad to hear it helped you. Thanks for the comment
Nice idea to prevent further damage to the door. 👌🤓
Thank you Si! Great presentation, tried it & it works!
Great idea! My project for the day. Thanks!!
Thank you! Worked like a charm
Thanks for uploading this video - very helpful, and subscribed!
Thanks. Saved me some money and the video was straight forward
At Home Depot
12 inch aluminum strap for $1 (pre-drilled...maybe not the best alignment of holes, but it worked)
wood glue $4
22 plastic spring clamps $7 (I dont own any c clamps and i figured my wife could use these for diy crafts)
Glued the door overnight while clamped
Next morning drilled the pilot holes, snipped the bar/strap to length, aligned everything and screwed the strap in.
Put the door up...woohoo !!!
+Running Hills Glad to hear it saved you some cash. What section was the aluminum strap in at Home Depot? Thanks
It was in the lumber section...near an end cap.
Item # Model # LSTA12
Simpson Strong-Tie 1-1/4 in. x 12 in. 20-Gauge Strap
It was maybe 1/8" too wide. I made sure to keep the excess inside (facing the closet)
+Running Hills Ok. I know what you are talking about now. Thanks
+Running Hills I just added a little info, based on your comments, to the text section of the two videos I have that used the aluminum strap. Some folks may prefer to go that route Thanks
This was very helpful - thank you so much!
GREAT VIDEO....saved me a ton!!! Thank you sir....
This is exactly what I need to do!
Thank you Sr!
Love the accent 👌
Thanks very much I'm going to attempt this tonight!
Did you do it? Did it work?
I did, and it did!
What glue did you use? I have 6 of these in my apartment and they all need this done. Is this worth doing myself or do I need to involve my landlord?
Hmm I think I just used some leftover liquid nails that I had. If you have a landlord they are responsible I would assume so I would just tell them unless you did something out of the way to the doors that made them break. They should just get you new doors I would assume, upto them if they want to fix it.
Daniel Pearson b
Thank you! Now I know how much of a pain in the ass is required of me to fix my closet door so my clothes will no longer be ruined by the sun
Thanks for this video, wish I would have found this much earlier. What kind of glue would you use to repair the split? My door is not real wood but like particle board or something. I would be interested in seeing how you glued and clamped. Thanks!
Really enjoyed your way of repairing this problem and also that you added security to the pivot stability with glue. Could you add the glue that you used for this? thank you
It was Amazing Goop. They make about 6 different kinds. I always buy the Marine version because it's UV resistant. I use it for tons of projects. Only problem I have with it is that the lids SUCK!!! Just lightly tighten it or it will split. I also put mine in an old tennis ball container to protect it from accidental puncture. About the only local store that I have found to sometimes carry it is West Marine. So I started ordering it on amazon. You can look at the specs on... eclecticproducts.com/product/amazing-goop-marine/
This is legit. 😎
If you don't have a metal repair strip, you can also use 2 part EPOXY in the hole and put the pin in the hole, hold it in place until the epoxy sets.
Yes. Just watch out for splits in the wood. There is a lot of sideways force all in one spot. Even my 25-30 year old doors all split. I had to use wood glue and clamps to fix all the splits before I could do anything. I can't imagine how easy a new cheapo doors will split.
Helpful video! Thank you! I have a related question. What would you recommend if the hole has been worn wider? Not cracked, could I put some sort of adhesive or glue? Thanks in advance!
+Matt Soderling You could use an adhesive instead. I don't know what type of adhesive would be the best for that. But, the doors usually end up cracking anyway. It is best to go ahead and use a strap of metal to spread the force over the entire bottom of the door enstead of just the area around the hole. Did you watch this video also? ua-cam.com/video/duVzsVPJ7EA/v-deo.html Same idea, just a slightly different method. Good luck.
Thanks for the video & repair idea.I'm having difficulty finding aluminum or steel strap up here in Canada...Home Depot & Rona. Anyone know of other places? I'll check with Loews.
TrueValue, silicon or nylon washer will do.
Hi, thanks for putting this video. One question the aluminum strap is sold in Home Depot or Ace?
+Arquimedes Rivero Home Depot, Lowes, Ace, True Value... Just about any of them carry it. But occasionally I find an Ace or True Value that doesn't carry that kind of stuff. It just depends on what that store wants to carry. If you cant find aluminum, you can use steel. The aluminum is just easier to work with and won't rust.
Hey there, so I cant beleive I found a video of how to fix this issue, my daughters door in her bedroom broke in our rental, the door didnt split but that pivot fell into the door and the hole is worn out like in your video. Could you please tell me exactly what the parts you used are called so I can get them!
I will also add this in the description of the video.
The 1" aluminum strap I used is on the HomeDepot.com website under - Home\Hardware\Metal Stock\Flat Bars
If you need replacement parts, ACE hardware and True Value may have a better selection of bifold door hardware. They should also have the aluminum strap.
"Running Hills" pointed out that you can use a Simpson Strong-Tie Item #LSTA12 instead of the aluminum strap. It is a 1-1/4 in. x 12 in. 20-Gauge Strap. He said it was maybe 1/8" too wide so he keep the excess inside (facing the closet).
Would this work for the top? Pivot holes in top are worn and too big now. I tried using a washer but I couldn't put the door back inside the track. It was a tad too high.
You should be able to do the same thing to the top.
Here are links to all my bifold door videos
-----Top pivot - ua-cam.com/video/xlbAffsfNr4/v-deo.html
-----Bottom Pivot - ua-cam.com/video/ycOWj96iO0s/v-deo.html
-----Top Roller - ua-cam.com/video/disnVTOVte8/v-deo.html
------Bottom pivot using a locknut - ua-cam.com/video/duVzsVPJ7EA/v-deo.html
do you know how i can remove the plastic tune stuck in the hole in the bottom on the door
If you are talking about the threaded plastic tube, just screw the adjuster into it and pull the tube out. It should come out pretty easy if the wood is cracked. If the wood isn't cracked, it might be a little harder. I don't think I have ever seen one glued in from the factory, but there is a first time for everything. ;-} Good luck
ok thank you for getting back soon. it give that a try. thx
ok, i'll give it a try, thank you.
What supplies/tools will I need? I'm not a very hand man and I have 6 of these to do in my apartment.
I just used elmers wood glue for the wood part. I used Amazing Goop to glue the pivot to the aluminum. A couple of clamps to clamp the wood back together. The aluminum strap. Two inch screws. A drill. Drill bits. Screwdriver. Hacksaw. File to clean cut metal edges. The first one may be a little tricky for you. If they are cracked already, they will only get worse, so you might as well give it a shot. Good luck.
This is a great video! What did you use to drill the hole in the aluminum strap to make it large enough for the plastic adjuster to go through?
It depends on the size of the adjuster. Mine was wither 7/16 or 1/2. A standard wood bit (not a spade bit) should do it. But, a bit for drilling metal would be best.
I just saw this video and am interested if you have any recommendations on fixing a bottom rolling wood door that is that is split on the bottom.? I think the rolling hardware might need replacing as well. Would really appreciate some help as I can't afford to replace all my sliding closet doors!!
rvgambetty Is it the same kind of door as in my video? If not, can you send me a link to some examples of the door you are talking about? Or send me pictures? I just wedge toothpicks in the cracks to hold them open while I work some glue into the cracks. Then clamp it overnight (with a piece of wood on each side to spread the force of the clamp). After that, you can also use bondo to fill the old hole, if it is too warn out, and drill a new one.
@@fixpro256 can you post the length (I'm assuming 12 inches) and depth (height - how tall is the metal)? Also please post circumference of the pivot hole you drilled
@@leskaplan417 That was a long time ago. I don't remember the diameter of the hole. They make a few different pivot sizes, so best to measure the one you have. The strap is 1 inch. There is more information in the description of the video that you may want to read.
Can you purchase the alluminum bottom strip or is this something you have to make?
That piece is called "aluminum strap". They sell it at most hardware stores. Usually in 3 foot lengths.
How to open holes? Can I just buy the strip with holes or a pre made bracket ?
Dumb question, what kind and size wood screws?
I don't remember. I probably used exterior deck screws. 1-1/4 is the shortest they make. You can go longer, but the wood is usually only about 2 inches thick. So, if you go too long, the shaft of the screw will be slick near the head and won't provide any grip on the wood. So you will probably be safe with 2 inch screws.
Why not fill old pivot hole with wood glue and let set with pivot in place
If the wood's in good shape that might work. If it's split, you'll need to glue and clamp the cracks and use the metal to keep it from splitting again. Depending on the quality of the door, you may never have a problem with splitting. But, it's much easier to put the metal on before it splits.
If that is aluminum, you may have wanted to use stainless screws to prevent corrosion.
Good idea, in case they touch the carpet and the carpet gets damp. Haven't seen many stainless steel screws with good threads for wood. They are usually made for metal so they have shallow threads. But the deck screws made for treated wood are coated and work well (as long as you don't nick the coating).
@@fixpro256 no because of the contact between two dissimilar metals. Galvanic corrosion. It being a coated screw may protect it a little but in general aluminum calls for the use of stainless metals when contact is requires.
I've used non-coated non-stainless screws in aluminum in a dry environment with no problem. But in a wet environment, I've seen nicks in a coated screw cause aluminum to corrode. I've also seen stainless steel and aluminum react on sailboats. It's a tradeoff. I like the coated screws because they have better threads. If I were installing a bifold door in a salt-air environment, I would try to use stainless, if I thought the lesser threads wouldn't let go of the wood.
@@fixpro256 anyways, neat fix and thanks for sharing. I need to do this for a door and have plenty of scrap metal to use.
Doors quality Dolarstore. Every bady is having problems with dese fucking Doors.
😂
😂