How to Replace Front Brake Caliper 2002-2006 Honda CR-V

Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABC...
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABC...
This video shows you how to install a front brake caliper on your 2002-2006 Honda CR-V. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure.
This process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V
Tools you will need:
• 14mm Wrench 1aau.to/oa/1AXA...
• 14mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• Hose Pinch-Off Pliers
• Pliers
• Ratchet 1aau.to/oa/1AXA...
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ob/1AXS...
• Drain Pan 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@cursedhickoryactual]

❤❤❤
You guys are by far the BEST ❤❤
On UA-cam!!!
I NOW only trust your videos when doing my car projects

[@JTISingh]

Clear video and good explained all people are understanding,perfect,good teacher,thank you very much.

[@jpwiggo]

You put caliper lube - under the tins - that seems odd. I put lube on the pad ears and/or on top of the tins. Also the banjo bolt torque is 26lbs (but that's from memory need to confirm) Great video and thanks

[@timbuckman3870]

Great video. I installed the TRQ calipers on the rear of my 2006 CR-V and they are awesome!! Now I want to use also them for the front and they are not listed anywhere online????

[@samas5177]

Great guide clear and concise

[@gjm3525]

Really good video, thanks!

[@foysholuddin3375]

Very good

[@joshperez525]

Lets say you change all 4 calipers. Can you just bleed each one immediately after installation? I

[@mamadnori3222]

Thank you

[@alonsogomez7174]

☘️🍀⭐🌟⭐🌟👍