make a Concrete and Wood Garden Bench

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 197

  • @johngregerson5984
    @johngregerson5984 Рік тому +10

    What I like most about this guy? None of his projects require the festool domino

  • @shellydeatley8861
    @shellydeatley8861 Рік тому +168

    This is a valuable addition to my woodwork collection ua-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

  • @jefferyshall
    @jefferyshall 8 місяців тому +1

    This is great! I am going to make a couple of these this summer. My only concern is water filling the top holes for the bolts and sitting in there either rotting the wood or rusting the bolts eventually. I think I will try to put pieces of wire or small plastic tubing on either side of the bolts, something I can hopefully get out when removing the forms, to leave a small track/indentation in the concrete for any water that would collect in the holes to be able to run out

  • @kbr1887
    @kbr1887 Рік тому +1

    I know this is an old video, but that transition between the model and real life view at around 145 was just so buttery smooth

  • @CrustyAbsconder
    @CrustyAbsconder 4 роки тому +3

    In these troubling times of June of 2020, it is helpful to be able to go on to the internet and find a calm soothing voice, explain to me something that is helpful - versus some other channel where opinionated people talk about biased viewpoints that seem intended to get some of the viewers to get their knickers in a wad.

  • @bluetech2809
    @bluetech2809 6 місяців тому

    best voice ever, you seriously need to get some voice over gigs, easy money on the side!

  • @stewartking3413
    @stewartking3413 4 роки тому +6

    I think I finally found something to do since becoming disabled. Love the simple directions!

  • @sacdigitaldesignweb
    @sacdigitaldesignweb 4 роки тому

    This is the best UA-cam channel of DIY

  • @tienvu8799
    @tienvu8799 4 роки тому +3

    "Your channel is the best channel at showing and demonstrating how to build things that I've personally seen"

    • @MANaboutTOOLS
      @MANaboutTOOLS  4 роки тому

      Thank you very much! I so appreciate the support!

  • @george8873
    @george8873 5 років тому +48

    Your channel is the best channel at showing and demonstrating how to build things that I've personally seen. Love how you show both using the table saw and circular saw to cut with. Plus, graphic plans are great too. This is another fun project that won't be too difficult to make thanks to the thoroughness you present in making the project. Turned out beautifully.

    • @MANaboutTOOLS
      @MANaboutTOOLS  5 років тому +5

      Thank you so much! It was a very fun project.

    • @george8873
      @george8873 5 років тому +1

      @@MANaboutTOOLS You're welcome.

    • @vladomie
      @vladomie 5 років тому +2

      Exactly! -- I'm always curious how someone can "thumbsdown" a free video that has obviously had so much thought and effort put into it.

  • @victoriabishop1057
    @victoriabishop1057 4 роки тому

    Calm collected slow delivery for even non woodworker to understand and encourage to dive in and realised how one doesn't need big workshop to do lovely everyday projects which was holding me back. Thank you very very much.

  • @TheApostlex
    @TheApostlex 3 роки тому

    Guy as simple as it looks, that was a very nice bench, built with true skill...Great job

  • @Karen-lf9do
    @Karen-lf9do 5 років тому +7

    The perfect how 2 video , step by step . Thank you.

  • @alexv259
    @alexv259 2 роки тому +1

    BEAUTIFUL assembly demo! Thanks for taking great care to convey this nice design.👏👏👏

  • @53notneb
    @53notneb Рік тому

    I built 2 of these. They turned out very nice. Thank you!!

  • @BakthaBetaiyengar
    @BakthaBetaiyengar Рік тому

    Yet another brilliant tutorial video

  • @bitachonproject9489
    @bitachonproject9489 5 років тому +5

    For sure you have an engineer background, great class, fenomenal job. Keep up, please.

  • @SusanSoCal1
    @SusanSoCal1 2 роки тому

    Brilliant at giving instructions. Makes me want to give it a go.

  • @boboconnor1403
    @boboconnor1403 5 років тому +3

    I liked your idea of making a quick drill guide for drilling into the end grain of the stretcher. I can't ever recall wanting to drill straight holes in end grain before but I might just have to try making some of these. I too like working with concrete and wood. Just made a cat house with a concrete top to give the critters somewhere to keep warm this winter.

  • @raybrensike42
    @raybrensike42 5 років тому +2

    That Rapid Set is an amazing product. Normally sets very fast, but it is very strong, far superior to regular motor mixes.

  • @cburakb
    @cburakb 5 років тому +1

    I was getting super impatient about your new video! Well worth the wait as always. You are rockin' it!

    • @MANaboutTOOLS
      @MANaboutTOOLS  5 років тому

      Can Burak B. Thanks! This summer got very busy with another project. I appreciate your patience. Almost done Part 3.5 of lightweight concrete tests. That’s up next in a couple weeks. Kent

  • @liondazan3082
    @liondazan3082 4 роки тому

    What you did is an art man

  • @mongneverdied1
    @mongneverdied1 3 роки тому

    Thanks for the every your projects. 😊😊😊

  • @schwartzmatthewe
    @schwartzmatthewe 2 роки тому

    Love the design. I’m going to use an sds max and screw bolts instead of nuts though for the top.

  • @mershalinfredric2895
    @mershalinfredric2895 4 роки тому

    Great job..nice and clean way.. Keep it up. Learning new things from srilanka.

  • @boots7859
    @boots7859 3 роки тому

    Very nice, and doable for most of us handymen. My only change would be to either blacken the bolts/screws, or figure out how to electroplate them in bronze.

  • @latitude1904
    @latitude1904 4 роки тому

    Super good instructions and visuals

  • @Peggyt-jp6mt
    @Peggyt-jp6mt 5 років тому +1

    Great looking bench. The plasticizer works well.

  • @aulii11
    @aulii11 5 років тому +6

    Another great project - thanks for sharing!

  • @TinLe120
    @TinLe120 5 років тому +4

    So easy to follow and understand. 👍

  • @swhabby
    @swhabby 5 років тому +2

    Great addition

  • @Kajpaje
    @Kajpaje 2 роки тому

    Really nice, well organised presentation.

  • @matthew9918
    @matthew9918 2 роки тому

    recent to this channel but very good work and videos

  • @SpeedmechFarms
    @SpeedmechFarms 2 роки тому

    amazing animation..great job

  • @adnanjaradat825
    @adnanjaradat825 3 роки тому

    Great work

  • @chriskildun8810
    @chriskildun8810 5 років тому +2

    Excellent work, clearly described and thorough. Thank you.

  • @АндрейПавлушкин-э2и

    Привет! Ты молодец! Здорово все сделал. Hello, well done. Thank you.

  • @dwilliamson8974
    @dwilliamson8974 4 роки тому +3

    That was an amazing instructional video! I've subscribed for sure!

  • @morganestill
    @morganestill 4 роки тому

    Really impressed with the dissolve from the CG model to the real one you built. Excellent work.

  • @garrettalarmdepot7827
    @garrettalarmdepot7827 3 роки тому

    This was an awesome bench and craftsmanship by you!

  • @notanaive
    @notanaive 2 роки тому

    Very clean work and what a great instructional video like all others that you do. You're really a great pro.

  • @janetleeharrison
    @janetleeharrison 5 років тому +2

    Will be adding this to my list of spring projects for my garden! Thanks for being detailed - this really helps a non-builder like myself. TFS!

  • @RudraNeupane
    @RudraNeupane 5 років тому +2

    so much detail provided. Thank you.

  • @Dingbat217
    @Dingbat217 5 років тому

    Nice bench, I like the contrast between the concrete legs and the wooden boards. :-)
    Those castings came out great!

  • @warrenpeterson6065
    @warrenpeterson6065 3 роки тому

    Excellent video, excellent production, and excellent project. Thank-You so much! The only suggestion I can offer is if you are going to pour many legs then you may want to invest in marine grade plywood. It's expensive but the layers are high quality and the glue used is not water soluble.

  • @racebiketuner
    @racebiketuner 4 роки тому

    Really, really cool!

  • @jamesmoore5603
    @jamesmoore5603 5 років тому +26

    Any thought of capping the top hole recesses to avoid rain water pooling?

    • @MANaboutTOOLS
      @MANaboutTOOLS  5 років тому +8

      That's a good thought. Or, adding a small drain hole.

    • @J9_j3
      @J9_j3 5 років тому +3

      @@MANaboutTOOLS you can try using plastic bottle caps. find size that fits snugly. or make caps out of varnished cork

    • @doubledarefan
      @doubledarefan 5 років тому +2

      @@J9_j3 Like the bottle cap idea. If there are no caps that fit the holes, pick the next size up and redrill the holes. Adds a bit of color, too.

    • @ScooterFXRS
      @ScooterFXRS 5 років тому +7

      I'd be tempted to use wax

    • @donalda777
      @donalda777 5 років тому +5

      Maybe 3D print some caps with your logo on them?

  • @m2austin
    @m2austin 4 роки тому +1

    That transition at 1:22 ! Well done! You've earned my like and subscribe!

    • @matthewbrown9840
      @matthewbrown9840 4 роки тому +2

      I was really impressed by that also. The fir to birch transition at 3:28 was cool too.

  • @jonoel9488
    @jonoel9488 4 роки тому

    Nice job my friend

  • @AlpeshPatel-lp8fo
    @AlpeshPatel-lp8fo 4 роки тому

    Good , quality work
    Thanks

  • @armadillotoe
    @armadillotoe 4 роки тому

    I really like the simple elegance of that bench.

  • @kennethkiefer3886
    @kennethkiefer3886 4 роки тому

    I thought if I read all the people questions asked I found my answer..... Very good bench.....

  • @CitizenAyellowblue
    @CitizenAyellowblue 5 років тому +1

    Well made and explained.

  • @russellborrego1689
    @russellborrego1689 5 років тому +1

    Fantastic video! Great animation as well. Top notch!

  • @RuMax_77
    @RuMax_77 5 років тому +2

    Good work!
    Thanks for the video.

  • @HisWayHomestead
    @HisWayHomestead 3 роки тому

    you're videos are very well done!!!

  • @anastasiahopkinson5676
    @anastasiahopkinson5676 4 роки тому

    Excellent instruction, so thorough. You have inspired me and many others! Thank you.

  • @rogdotcom1
    @rogdotcom1 4 роки тому

    Absolutely great job, enjoyed the project big time, 2 👍👍’s up !

  • @ColinCochranT11
    @ColinCochranT11 4 роки тому

    Very nice!

  • @skullcollector29
    @skullcollector29 4 роки тому

    WoW........That is awesome ....I love it ........!

  • @BADER0079
    @BADER0079 4 роки тому

    Great job

  • @emadhamdy2562
    @emadhamdy2562 3 роки тому

    Perfect

  • @mattevans-koch9353
    @mattevans-koch9353 5 років тому

    Beautiful bench and it really goes with your concrete garden boxes. Thank you for the video and another great idea. Take care and have a good weekend.

  • @abdelhakyac7285
    @abdelhakyac7285 Рік тому

    Beautifully made..... still asking myself about the rubber.... isnt the concrete going to absorpb any drip of water? Or do you fear that concrete keeps humid in the exterior and while eventually cause the wood to rot?

    • @MANaboutTOOLS
      @MANaboutTOOLS  Рік тому

      Thanks! I think the concrete is fine being wet from time to time. The wood (as it always does) will rot over time. Using cedar, a good finish, and the rubber gaskets should slow that process down I hope.

  • @1life857
    @1life857 4 роки тому

    Gorgeous design & execution! Keep it up!

  • @michaelnewsomegreen5500
    @michaelnewsomegreen5500 4 роки тому

    I really enjoy the detailing you use in your vids. I am learning much from watching you work. Thank you!

  • @thegreenman4898
    @thegreenman4898 5 років тому

    nice clean design

  • @ScooterFXRS
    @ScooterFXRS 5 років тому +1

    Well done, Kent. I would have embedded coupling nuts into the concrete vs bolts but, meh, that's just me.

    • @MANaboutTOOLS
      @MANaboutTOOLS  5 років тому

      Thanks! I looked at that too. But went with the carriage bolts as they are easier to find for most people.

    • @1982MCI
      @1982MCI 5 років тому

      @@MANaboutTOOLS should be able to get J bolts at any of the big box stores right next to the carriage bolts tho and they will serve much better. Carriage bolts may tend to twist down the road. Good luck tho, great job.

  • @IAMSatisfied
    @IAMSatisfied 5 років тому +2

    Sweet build, Kent... thank you for taking the time to make such a thoroughly detailed vlog. Once it's cured for 28 days are you going to show us your "dance on the bench" strength test? :o)

    • @MANaboutTOOLS
      @MANaboutTOOLS  5 років тому

      Thanks! It's very sturdy right out of the form. Cheers, Kent

  • @RickMcClain
    @RickMcClain 5 років тому +3

    Well done video, and very attractive bench. Any idea how much the final product weighs?

    • @MANaboutTOOLS
      @MANaboutTOOLS  5 років тому +3

      Thanks! Each leg is around 50lbs. I'll put them on the scale when I move the bench to the garden.

  • @christinanordholm6917
    @christinanordholm6917 4 роки тому

    Excellent and inspiring. Do you have a suggestion about how to add a back rest to this bench design? Thank you for the effort you make to share, with such success, your experience with all of us!

  • @magasindor1239
    @magasindor1239 5 років тому

    The professionnel man 👍🏼👍🏼👍🏼👍🏼👍🏼

  • @robertlackey7212
    @robertlackey7212 2 роки тому

    I really like your designs , the problem I see though is around here at least good lumber all goes to builders and what I can get all is warped , cupped , bowed , twisted , etc. I once had a job doing construction site cleanup and was told to dispose of a entire bundle of 14 foot 2x6 fir that were perfect !

  • @SRG-Learn
    @SRG-Learn 4 роки тому

    Awesome, thanks for sharing.

  • @daanvangeijlswijk7787
    @daanvangeijlswijk7787 3 роки тому

    Nice design, and very clear instructions. I have some doubts about the way the bolts are inserted. The concrete seems too brittle and I can imagine they will slowly break the concrete when force is exerted. Maybe it makes sense to somehow 'package the bolts before pooring them in? For example in epoxy.

  • @Behestify
    @Behestify 4 роки тому +1

    Really like your bench. The only difference I’d make is use of S/S threaded rod cut to length or ensure galvanized bolts are hot dipped not plated.

  • @TurgayUrla
    @TurgayUrla 5 років тому

    👍Eline saglik çok güzel oldu 👍

  • @adnphllps
    @adnphllps 2 роки тому

    Thanks for sharing your design. I know it has been awhile since you posted, but could you tell me the name of the stain you use in your projects?

  • @VertigoGTI
    @VertigoGTI 5 років тому

    Great looking project. Tempted to try this myself with some raised grain wood for the forms

  • @madworld6801
    @madworld6801 4 роки тому

    Amazing work and sharp in details

  • @77791z
    @77791z 2 роки тому

    Awesome build. Would it be structurally sound to make it a longer bench? And if so what’s the max length the boards could support you think?

  • @dc74
    @dc74 4 роки тому

    Thumbs Up to you. Pleasing to watch your work.

  • @JzimmaSRT
    @JzimmaSRT 4 роки тому

    used motor oil works amazing as well, and its free!

  • @toastrecon
    @toastrecon 4 роки тому

    So cool! Man, that bench looks good.

  • @hassanbazzi3545
    @hassanbazzi3545 5 років тому

    Fantastic project. Thank you 🙏 for sharing

  • @GMastolier
    @GMastolier 5 років тому +2

    Great job! I enjoyed it all the way through. What software did you use for the drawings and animations?

  • @HisWayHomestead
    @HisWayHomestead 3 роки тому +2

    I'd be worried about the carriage bolts spinning in the concrete. another option to avoid that is a square u-bolt cut in half so you have an "L" shaped bolt.

  • @johnsteamer828
    @johnsteamer828 2 роки тому

    Nice

  • @pauldejesus9644
    @pauldejesus9644 5 років тому

    amazing video great work

  • @carolewarner101
    @carolewarner101 5 років тому

    Looks really sharp!

  • @cactus4518
    @cactus4518 3 роки тому

    great project! but water can stay in the bolt holes?

    • @MANaboutTOOLS
      @MANaboutTOOLS  3 роки тому

      Thanks! After the video I drilled small holes inside the counterbore of the seat planks. These holes allow water to drain down the inside of the concrete legs. I updated the plan to show this as well.

  • @dwaynerobare1153
    @dwaynerobare1153 4 роки тому

    Great project!!! nice.

  • @javsoul
    @javsoul 5 років тому

    very nice!!!

  • @mariekiraly100
    @mariekiraly100 4 роки тому

    would a light coat of grease keep the cement from curing? I'm asking because I thought of using a more decorative piece of wood in the middle - that has a lot of curves, etc.

  • @dk3212
    @dk3212 5 років тому

    Beautiful!

  • @MarcosLopez-hy3px
    @MarcosLopez-hy3px 5 років тому +1

    Excelente!!!

  • @gmc5862
    @gmc5862 5 років тому +1

    Hi, would you please telling me which software you used for designing your projects, thanks

  • @saif9586
    @saif9586 Рік тому

    when it fills with water, do the bolts rust and corrode?

  • @andregustavodalsasso715
    @andregustavodalsasso715 4 роки тому

    Parabéns! Muito bom. 👍

  • @AdityaMehendale
    @AdityaMehendale 3 роки тому

    I was gonna ask about water-barriers, but you did add the gaskets :)
    One thing you promised 'to tell later', but didn't come back to: Why did you counterbore the holes on the forms?