Reach RS+: RTK GNSS receiver with centimeter accuracy
Вставка
- Опубліковано 3 жов 2024
- This video overviews RTK, PPK, NTRIP and shows how you can use Reach RS to enable centimeter-accurate positioning for your application.
Learn more about Reach RS+: emlid.com/reachrs
Contact us: emlid.com/contact
Congratulations finally I found some people been honest with positioning systems! I’m Working on agriculture for years and all available tech are expensive. Please let me know if you guys have some product or are interested on the development to auto guide for tractors. I’m interested on help you guys, be a customer and for sure be a Dealer here. Tks
Nice work, congratulations on the success of your company, it really comes revolutionizing the gnss market. I am very happy to finally be able to use emlid in my works here in Brazil.
What are the prospects of using the new UBLOX ZED-F9P in your product line?
Hi and thank you for your kind words! We recently launched the multi-band RTK GNSS receiver Reach RS2 and it has the u-blox module inside. You can find more information on our website: reachrs2.emlid.com/
Mine just got here after a slight delay in Customs. The two RS+ units are charging now for the first time.
Hi Pete and welcome on board! While your units are charging, we recommend you to check out our forum: community.emlid.com. Feel free to message us if you have any questions.
I'm really impressed, I've been checking your website thoroughly. I'm a Mavic 2 Pro owner and I was thinking to buy a Reach UAV RTK kit and an aditional Reach RS+ in order to do RTK photogrametry with CGP with a Reach RS+ as Base and another Reach RS+ (CGP) and Reach M+ (Mavic 2) as Rover. My questions are: 1. That RS+ base and 2 rover system (RS+ and M+) would work same time? 2. Is it possible to install that RTK system in my Mavic 2 Pro? If so, has been done or tested by your company before and how would it works, could I use same workflow as usual photogrametry with dronedeploy or pix4rd? Thank you very much for your feedback, I'm really interested in your products.
Looks good! Will L5, B5, etc. be coming to the Reach RS+ anytime soon?
Very interesting video for learning purpose. Currently I am doing drone survey for topography assessment purpose. I'm wondered if this kits can give correction to hill with high slope and covered by big tress. I am trying to get the true elevation of the topography under sub-centimeter level accuracy.
Hi Jose! Please email us on support@emlid.com, our Application Engineers will help you.
Can you guys please make a Gnss that is stand alone that is sub meter accuracy to compete with Arrow/Juniper/Trimble. Not everyone is a surveyor who needs 1cm accuracy but we do need something that is sub meter accurate that is small and compact and affordable!!!
We would like to rescue fawns in the mower season. we use for those missions an Phantom 4 pro and Flir vue R with analog transmission and live search and rescue. So I would like to know how can I mark the fawns via Emlid RTK and send gps rtk data it to the ground crew and continue flying and saving fly time? Which emlid system would fit best? Which system is compatible with Flir Vue pro R 640x480 get accurate coordinates? what software to use, where we could store and shere fotos with gps location of the fawns and the field may in google earth? Thank you very much for your feedback, best regards
Very interested! If you buy 2 receivers and use one as a base and one as a rover how long does it take to get a fix? I'd like to use it in my fence building business for marking out the fence but if it takes several minutes to get a fix on each new location it would be next to useless as it would just take way to much time.
Hi,
We recommend you to check the Reach RS2 Survey Kit for your fence building business: store.emlid.com/product/reachrs2-survey-kit/. Reach RS2 is a multi-band GNSS receiver that acquires fix in just a few seconds. Please note that the time might increase as it highly depends on conditions.
do you have zoom product orientation
Is it able to apply a geoid in RTK mode? Is it able to localize or calibrate to a local system? Looks Amazing!
Hi there, and thanks for your interest!
ReachView 3 supports more than a thousand coordinate systems and has built-in support for grid and geoid transformations. You can smoothly set up a coordinate system for your country: docs.emlid.com/reachrs2/reachview-3/crs-setup.
Localization and calibration features are not available at the moment, but these requests are already noted.
P.S. If you can't find the coordinate system you need, please fill in this form: emlid.typeform.com/to/efWVaB3h. We will contact you once your desired system is added to the app :)
Does this require a base station to use?
Hi there! This is the first model of
Reach receivers. Check out the modern version-Reach RS2+ emlid.com/reachrs2plus/. You can use two Reach RS2+ units as a base and a rover. Or you can use a single Reach RS2+ as a rover and connect it to an NTRIP service or CORS to receive RTK corrections.
I think we will buy it. Your experiences in forestry surveying?
Reach RS+ is an L1 receiver, so it needs a clear sky view without obstacles for the best performance. In regards to Reach RS2, it is able to maintain a reliable fix even in challenging conditions such as urban areas and trees canopy. We recently conducted forestry tests in Latvia with Reach RS2 and it held fix on high slopes in the forest.
pillar location using GNSS receiver?
Is it the same unit being used for the stationary and mobile part of relative measurement?
Hi Simon. To achieve the centimeter-level accuracy you need two Reach units: one as a base station and another one as a rover. You can find more information about the Reach RS+ Survey Kit on our website: store.emlid.com/product/reachrs-survey-kit/
@@Emlid Sounds great, i'm having thoughts about saving for a setup to pair with a ~1k$ drone for photogrammetey.
So am i correct when understanding that the 1cm precision can be achieved completely standalone, with no NTRIP corrections requiring costly subscriptions?
@@RenisauceTuomi yes, you are correct. The centimeter-accuracy can be achieved by using two Reach receivers communicating via LoRa radio. But please keep in mind, that Reach RS+ requires a clear view of the sky and isolation from objects that can cause interference. If you have any additional questions or would like a bit more clarification, don't hesitate to get in touch with our support team directly via email: support@emlid.com.
@@Emlid Thank you very much for the information.
Considering i'm thinking about freelancing open-surface projects like volumetric calculations and mapping it sounds like something that definitely would meet the requirements.
I'm very inclined to buy it soon, thank you.
@@Emlid If using the Reach RS+ in very mountainous areas must the base be positioned on top of a mountain , and if the rover is 500 metres lower in valleys 2 - 4 km away will both stations maintain their relative connection ?
If a base RS+ is positioned on top of a mountain can an RTK equiped UAV be used as the rover and maintain connection even if there are high mountains obscuring the direct view ?
Hello! Is the elevation accuracy also 1cm?
I would like to know if high altitude differences can affect communication between rover and base.
I am thinking about using your product for topographic survey if suitable.
Hi Christian, thanks for your interest! Reach RS+ provides kinematic vertical accuracy in 14 mm in good conditions.
Rover and base can be connected via LoRa, Serial, NTRIP, Bluetooth, and TCP. Each of the means has its own requirements on the positioning that ensures ongoing communication. As we see, our Support team is already in touch with you via email to provide more detailed guidance.
@@Emlid Thank you very much. The answer is clear enough for me to think about ordering.
I"m interested in ypur product, hope to hear your product ID soon
Is this compatible with any data collector software? Survey pro? Trimble access? SurvCE?
Hi! Yes, you can use Reach with SurvCE and other popular industry software. Please find the example of Carlson SurvCE setup guide in our docs: docs.emlid.com/reachrs2/common/tutorials/survce/
What's the difference between Reach RS+ and Reach RS ? Are they compatible?
Hi Jonathan! Reach RS and Reach RS+ are fully compatible and work great together. RS+ has a new processor, but enclosure, software, and overall functions are the same.
You can learn more here: emlid.com/au/reach-rs-reach-got-updated/
How to buy a device like this in Costa Rica? Are there any representation in Central América.
Hi! Please find the list of dealers on this page: emlid.com/dealers/.
como puedo conseguir el porta celular?
@Emlid can I use this to enhance accuracy in chrome browser?
Hi, you can use our app in Chrome browser!
Hi. If a single RS2 unit was mounted onto the roof of a vehicle and driven along a highway at 100kph in an area with CORS correction coverage; with SBAS; and with a clear view of the sky, what approximate level of accuracy could you expect to s.achieve using RTK and PPK modes? I live in New Zealand. Thanks
Hi Peter,
The maximum update rate of RTK position on RS+ is 14 Hz, therefore, on such a speed, you'll get a solution only each 2 meters.
Emlid thanks for confirming. Can the approx accuracy of the fix be estimated at 2m intervals at 14hz? Has this been tested by any emlid users?? Thanks
Could you expect each sample point (at 2m intervals) to be sub-meter, when PPK processed?? +/-50cm would be fine for our application.
@@peteroregan7786
Could you please email us on support@emlid.com? Our Application Engineers will help you to get a suitable Reach.
How to know if someone have a base near my home ? I want to use rtk for GCP for mapping with my drone. What I really need? Do you offer Deal Kit ?
Hi there! If you don't place your own base, you can connect your rover to the local NTRIP service to get corrections. We'd recommend you to check this page to find more info about placing GCPs with Reach: emlid.com/gcps-for-drone-mapping/
If you need assistance, please feel free to contact us any time at support@emlid.com. We'd be happy to help :)
@@Emlid hello, so no matter where i live, if i have a cellular network on which with my smartphone i can share a connection with the rover would it work without having to buy two units? How accurate would be and which model should I buy? RS+ can do that? because I am a beginner and I do not have a big budget Thank you
@@jean-francoisfortier8727 Sure, you don’t necessarily need a second unit for RTK. If you work in an area with strong cellular network coverage, you can use the local NTRIP service as a source of corrections.
It'd be awesome if you could send us more details about your workflow and environmental conditions at support@emlid.com. This way, we can help you to choose the right receiver for your work.
Hi. How much will be for base and rover gnss?
Hi! Reach RS+ survey kit which consists of two Reach RS+ units is $1598. You can order it online at our store: store.emlid.com/product/reachrs-survey-kit/
Please help me, i can´t see the openstreet map in my mobile with emlid app
Hi, you should connect the Reach unit to a network with Internet access for displaying maps. This tutorial will guide you on how to do it:
docs.emlid.com/reachm-plus/common/tutorials/connecting-to-the-internet/
I have a question please, i heard from other users that the reach system, won't work on urban areas, is this true? thank you in advanced
Hi,
Here you can see the results of Reach RS tests in the urban area and comparison to the traditional equipment: community.emlid.com/t/comparison-between-emlid-reach-rs-leica-altus-and-trimble-receivers/11801
The problem isn't accuracy in urban areas as the article is testing. It's the fact that Reach RS is single frequency. This is the single limiting drawback to Reach RS. L1 signal bounces off everything, including tree leaves and buildings, so an urban environment can cause a loss of signal very easily, especially if the obstruction is to the south. If Emlid ever goes dual or triple frequency, it will probably be as capable as $35,000 units.
@@ryanmcgowan3061 We recently launched our new multi-band receiver Reach RS2. It costs $1899. You can find more information on our website: reachrs2.emlid.com/
@@Emlid I'm aware, and excited to see Emlid go L1/L2, and see a much more robust housing and mount. I'd love to see the next release be a fully-function data collector on Android. It's the only missing link now for land surveyors to be entirely in the Emlid ecosystem.
FYI, our last benchmark run on RS+ had sub millimeter deviations after post-processing, which I've never seen before.
Does it work in Ecuador???
Hi! Sure, Reach relies on GNSS signal and works globally.
i have the Reah Rs+ kit for One year in Mexico but is not workin at 100% just 40% becouse long range is only 1.4 km in Rtk mode. No 6km.
Hi,
LoRa radio performance depends on different factors. In most cases, it should be possible to configure it to work on up to several km baselines. We can help you check your settings to make sure you get most out of LoRa radio, please contact us via the form: emlid.com/contacts
How can I order some receiver?
Hey there! You can order Reach receiver in our webstore store.emlid.com/ You can also contact our Sales team emlid.com/contacts/ so they can help you find our dealer nearby.
Thats cool..
How much is the reach rs2?
Hi! Reach RS2 costs $1899
I bought two RS2 units and the quality in the urban area is not so good. You unfortunately continue to test in commercially viable locations, or else you don't have a professional on staff who really does tests that push the equipment to the limit
Hi Fábio, sorry to see you had a bad experience with Reach. RS2 is capable of providing a robust solution even in somewhat challenging conditions. It'd be great if you could elaborate on your experience so that we can understand why it happened.
Our Support team is already in touch with you via email to assist.
How much
You can find all the information about Reach RS+ on our website emlid.com/reachrs.
Hola... gracias por la información... por favor me podrías decir donde puedo comprar el RS2 ... triple frecuencia en new York ( unites states)....viajó el 31 de mayo de 2019.....muchas gracias por contestar...!!!
Hi! You can order online in our online store: store.emlid.com or from one of our dealers: emlid.com/dealers.
I purchased two RS+ units, and I'm telling people that what you're receiving is an unfinished product. Constant issues, no turn on go, no UTM (or support for states CORS system), and these items on the forums always get the comment "they're on our roadmap". I have not been happy with this product at all.
Hi Michael,
All features and specs outlined on the landing page of Reach RS+ are finished and already on board. Reach indeed lacks some non-advertised features you mentioned and the work on them indeed is in progress as it takes time to implement it in the software.
The thing is that you don't always need them in the field. And if you need, you can use a 3rd-party software. Reach integrates well with external land survey software for Windows and Android.
me podrian enviar este tutorial en castellano a mi correo? mil gracias
Hi,
Sorry, but we have all the videos only in English. You can turn on subtitles to this video and change the language to Spanish (auto-translated). We hope this will help!
Los subtitulos son tambien en ingles no hay posibilidad de ponerlo en castellano
@@elcordobes3417 Go to Settings - Subtitles - Auto-translate - Spanish.
SELLING MACHINE IN VIET NAM
Nothing wrong with your english !!
Sorry, if you are going to speak that quickly, your English needs to be perfect!! Too hard to understand!!!
We are sorry to hear about this issue. Please try to turn on the English subtitles by clicking the CC icon in the lower-right corner of the video.
Nothing wrong with speaker's english.
A slight accent but clear and concise !