I think the visibility is great, no problems here. If you watch my other video it will show you what it looks like in a bright sunny florida day. It's actually even more visible than the video shows. No problems here, but some people prefer the blinkers that stick out for visibility. You can also get passenger peg blinkers.
It's one of the louder exhausts, I dont know what the Jardine or Yoshi sound like in person. People on the forums say that the 2bros is one of the loudest except for maybe the devil exhaust. I personally think it sounds great, maybe a little too loud. If you want a more quiet exhaust i believe yoshi is the way to go, great looks as well.
I just ran it around the exhaust bracket into the bottom of the screw hole for the heat shield. Maybe hold it in there with a black zip tie. I got the license frame and everything from tripage. But the license frame and LED light are the same thing. I'm thinking you would need a different frame if you want to use your plate light.
the website doesnt currently have this kit available, you have to email them. You can just get the parts you want. There are 2 things 1. License bracket with light 2. Mounting hardware for your Exhaust
I'm not sure, I would give tripage a PM on the forums. But if you have your own plate light maybe you can order a cheap aluminum license frame from ebay and use tripages mounting hardware on it. Then just use your own plate light? Not really sure what the Competition Werks F/E you have looks like. I would give tripage a PM first, he knows more about this than I do.
3:20 I am a complete newbie when it comes to wiring. I made a custom fender eliminator and i need a license plate light. I purchased two led screw lights is it possible to run x4 wires off of the original harness? ex. Red,black x2 from each of the license plate screws so 4 wires in total. 2 to the black ground, and 2 to the running light? will it work? thanks
hey do you have any problems running without your heatshield with that two brothers exhuast... don't like the way it looks with the old heat shield and the new exhaust... was thinking about trimming but i see that you just ran it with out...
umm if you wanted two brake lights you could have it. Not sure why you would want 2 of them? You can use this fe kit with the iwin moto light. Just make sure iwin is still shipping lights
I dont hide my plate when im driving out in public, i dont see any reason to hide it here. Go ahead and come steal it, you wont be the first one thats tried.
It is not street legal. The again anything you do to your bike is probably not street legal. Read up on the laws, any aftermarket exhaust is illegal. Blinkers must be 10" or so appart and you need reflectors. Most of the things we do to modify our bikes makes them illegal however you will find most cops don't have a problem with it. I have not been pulled over because of my plate location. I have not heard of anyone that has gotten themselves into trouble because of this tag holder. GLuck.
I think the visibility is great, no problems here. If you watch my other video it will show you what it looks like in a bright sunny florida day. It's actually even more visible than the video shows.
No problems here, but some people prefer the blinkers that stick out for visibility. You can also get passenger peg blinkers.
It's one of the louder exhausts, I dont know what the Jardine or Yoshi sound like in person. People on the forums say that the 2bros is one of the loudest except for maybe the devil exhaust. I personally think it sounds great, maybe a little too loud. If you want a more quiet exhaust i believe yoshi is the way to go, great looks as well.
good choice, both great products!
I just ran it around the exhaust bracket into the bottom of the screw hole for the heat shield. Maybe hold it in there with a black zip tie. I got the license frame and everything from tripage. But the license frame and LED light are the same thing. I'm thinking you would need a different frame if you want to use your plate light.
Un trabajo muy bonito. Si señor.
Well done!!
the website doesnt currently have this kit available, you have to email them. You can just get the parts you want. There are 2 things
1. License bracket with light
2. Mounting hardware for your Exhaust
Nice! This helped me a lot!
@brocknchrist I run my two bros carbon with no heat shield and haven't had any problems whatsoever after about 5k miles.
nice, i can fold my plate up when im running from the cops
I'm not sure, I would give tripage a PM on the forums. But if you have your own plate light maybe you can order a cheap aluminum license frame from ebay and use tripages mounting hardware on it. Then just use your own plate light? Not really sure what the Competition Werks F/E you have looks like. I would give tripage a PM first, he knows more about this than I do.
Hey, which tail light did you use? I thought for the 2007 the tail light hanges below the exhaust.
Yes, I will message you the link since we cannot post it here.
yes it does
yes, they are integrated.
3:20 I am a complete newbie when it comes to wiring. I made a custom fender eliminator and i need a license plate light. I purchased two led screw lights is it possible to run
x4 wires off of the original harness? ex. Red,black x2 from each of the license plate screws so 4 wires in total. 2 to the black ground, and 2 to the running light? will it work? thanks
hey do you have any problems running without your heatshield with that two brothers exhuast... don't like the way it looks with the old heat shield and the new exhaust... was thinking about trimming but i see that you just ran it with out...
good to hear :)
umm if you wanted two brake lights you could have it. Not sure why you would want 2 of them?
You can use this fe kit with the iwin moto light. Just make sure iwin is still shipping lights
PARTICLE RULES!
that is part of the aftermarket twobros exhaust.
yo!
were did you get the lights for the lisecene plate bracket?
because i did not see it on tripage website.
holla back!
did u buy the full kit and does it come with that tag bracket?
Looks neat, how can you find out where somebody lives according to the licenseplatenumber ? There is no public database if you ask me.
what hugger is that and does it come in the $200 kit?
sick.
This light runs around 130 dollars i believe. I bought it from another forum member for 80
did you solder those, or not?
so a fender eliminator is an LED license plate bracket? o.O
@DreamAirlines Doesnt move unless you want it to.
really, really clean.. how much did u spend ?!?
you can find it, there are places.
what music did you use?
Looks.
that hugger is stock
too bad you can bearly see the tail light. That's the whole point. Make a better more visible tail light.
check the video comment
I dont think i can post the link directly on the comments here.
I dont hide my plate when im driving out in public, i dont see any reason to hide it here. Go ahead and come steal it, you wont be the first one thats tried.
everyone knows his plates know LOL
and this is a problem because???
You drive around all the time, advertising your plate number during the day. I see no difference.
Lmao at this comment, I'm sure slimesbro steals candy bars from convenient stores because he is really that pathetic.
It is not street legal. The again anything you do to your bike is probably not street legal. Read up on the laws, any aftermarket exhaust is illegal. Blinkers must be 10" or so appart and you need reflectors. Most of the things we do to modify our bikes makes them illegal however you will find most cops don't have a problem with it. I have not been pulled over because of my plate location. I have not heard of anyone that has gotten themselves into trouble because of this tag holder. GLuck.