Barn Find 1964 Jeep CJ5 (Is It Road worthy?)
Вставка
- Опубліковано 5 тра 2023
- Learn more about the Shell Rotella® National Promotion at www.rotella.com/rewards #runsonrotella #sponsored
Offer valid at participating locations only. Offer ends June 30, 2023
Grab Yourself a Hat and a Shirt from the Merch Store! DieselCreek.com/
Like something you see in a video? good chance its linked in my Amazon Store: www.amazon.com/shop/dieselcreek
Follow me on Instagram & Facebook @dieselcreek to see what i'm up to before it hits UA-cam!
#DieselCreek
-Custom Music made for me by Vinnie Longhi of the Semi-Supervillains
Check them out here: / tssvillains
-Wanna send me something? Sent it to:
Diesel Creek
P.O. Box 109
Burgettstown PA 15021-0109 - Авто та транспорт
2 Diesel Creek videos in one week is like Christmas, with more motor oil. Thank you for the entertainment and motivation Matt!!!
3 things Matt... 1- your videos are NEVER too long! I'm certain that others will agree, your videos could NEVER be too long. 2- I would love to see you do more videos, but I get it takes a lot of work just make one, let alone doing as many as you do already. Lastly - Your sponsored talks. They're so natural and go with the flow of your videos and I love that. All other youtubers that I watch are so outlandish with their sponsor segments that it disrupts the whole video. I, after watching so many of your videos, know that Rotella do good quality fluids and I found that out without it being drummed into me! Thanks man, and enjoy your weekend!
I have been a Shell products guy for over 40 years, from Aero Shell products in the light aircraft I flew to small engines in various toys. Nothing else will ever find its way into any vehicle I operate.
I agree videos are never too long wish they was longer fantastic viewing all of them
thats like exactly on the point yes i would watch even 4 hours of matt just working on something
I love the plug wires arching across every time you rev it up lol. Still a work in progress
I can confirm - I use the videos as therapy for anxiety and can watch Matt working on stuff all day long 😂
This what I miss so much from my childhood. The ability to disassemble a part and fix it instead of planned obsolescence. I still try to fix anything I can instead of outright replacing it because I grew up dirt poor and it was imperative . Many a night of holding a flashlight under the truck as my dad dropped the transmission. Thank you Matt for keeping the spirit of yesterday alive.
DIY's have been obsoleted with modern technology / obsolecence
@@araofmadisoncasey4247 just get a horse like everyone else. I knew these "cars" were a fad anyway.
@@araofmadisoncasey4247 naw you still save a ton of money running old equipment and fixing it yourself. Some truths are timeless.
Some things are just not worth repairing due to low cost
@@alexstromberg7696Like GM EVAP system that picks up all the dust from rear tires, clogs the system and you end up changing a $700 part? South main auto has a short available.
Matt, you need to clean the commutator segments because each pair of the commutator segments goes to one of the windings and the other end of the winding goes to another commutator 180 degrees on the other side. So each brush connects to a single winding via the commutators. Try this with an ohmmeter, pick any commutator segment connect one lead to the commutator and the other lead to the commutator 180 degrees on the other side - you should see continuity (it will read some resistance (ohms)). If you go to the adjacent segment you should NOT see continuity. So, the reason you clean the insulating space is to keep the adjacent commutator insulated from the next commutator (set of rotor windings). It is the same for both generators and starters. When you clean between the commutators be gentle!!! The pick should be used to dislodge bigger pieces with a gentle scratch, then a paint brush to gently clean down into each slot. It is a very good idea to lightly clean (sand) the commutators like you did on the video. But the brushes need a very light cleaning too. But again you have to be very careful that you do not damage the delicate brushes. The brushes are not square to the commutator but are curved to ride against the copper commutators for maximum brush to commutator contact.
If you have the patience this is a good way to diagnose problems with alternators and generators. Using the ohmmeter, each pair of commutators should have about the same resistance. If one is open that is a bad winding. Likewise, if you touch one of the leads to the commutator on either side of the target commutator the resistance should show open. If not your have a shorted winding or dirty commutator segment, hence the cleaning. Sorry this was a bit long winded but it is difficult to explain clearly in writing.
Good explanation, I have been into starters and generators and never knew this before. I’ll know better next time. Thank you!
Matt, you're producing some of the best content on UA-cam right now. This type of content is what keeps me coming back to your channel. Thanks for a great video.
8k views in 20m, Matt you have come a very long way. Please keep us entertained with the great videos for years to come.
great channel
47k VIEWS in 3 hours
@@paulsilva3346 *57k
What a blessing that new shop is.Concrete floor and bright lights.It's a game changer.
I like that Jeep, Matt! Once you get it road worthy/legal, I still think it is important to install a roll bar. It is especially important if Ms. Eva will be driving it some. Anyway, thanks for showing us how you're bringing the old Jeep back to life!
And seat belts, even if it not required by the age of the vehicle!
For 17 years I drove my S-10 THIS IS FUCKED ⅕2 C300 from BTW she
Can you imagine the knees going into that metal dashboard too.. Yikes
Yeah, two Diesel Creek videos in one week! Way to go Matt
To find one of those in PA that isn't just a seat sitting on a pile of rust is a minor miracle. Great find!
Something about a jeep that makes me smile.
Just a little tip for future, whenever I fit a new thermostat that does not have a hole or gigle pin through it, I drill a hole. I do this with a small hole no more than an 1/8". This allows very easy bleeding, quicker thermostat opening and possibly less chance of overheating. At the very least the filling and bleeding is so much easier and won't blast out when thermostat opens. I have been a mechanic for 32 years and never caused me a problem yet. hope this helps. Love your channel too.
The commutator requires a gap between the charged rails.
It’s interesting watching you tackle stuff you have never tried before and is an excellent example of your innate mechanical skills. Good job Matt.
Dang Commies are everywhere
Good mechanics have worked on mechanical devices they know nothing about all their lives. that's how we learn. Personally. I started out fixing cap pistols.
I really enjoyed this one. Looking forward to watching you get the shop organized.
Definitely, Lon... and since carbon will conduct electricity, having a bunch of it packed into the gaps will tend to short-circuit each commutator contact to it's neighboring contacts and reduce the overall efficiency of the generator.
A hacksaw blade works well for cleaning the gaps. And for cutting down the insulator if you turn the copper down in a lathe.
Matt is putting his shop to good use. No more mother nature as a roof!😄 As Jackie Gleason would say... How sweet it is.
Now he needs a part washer and a sand blaster in the shop, plus modifying and installing the gantry crane, and then the list goes on forever:)
@@PatrickPoet I'm expecting a vehicle lift very soon. Unless he doesn't want to dedicate space in the shop for it.
@@centauri61032 Mustie1 has a lift that is movable
@@centauri61032wild fire lifts like the ones that vice grip garage has are movable
Love the new custom interior
Great to see a video over 30 minutes long. Thanks Matt
Jeepers Creepers! She's alive! Built right here in my hometown Toledo Ohio
As my truck sits up on jack stands waiting for rear axel seals, it occurs to me how much funner watching someone else fix things is!
One comment on lighting - a small spotlight/snoot would make wheel-well shots clearer? Maybe? That new shop looks SO NICE to work in. Looking forward to seeing the floor heating going.
I love the fact that you keep it old school all the way
Perfect old iron, for an old iron kinda guy ! Nice work Matt!
The dichotomy of the old Jeep and your new ride is taken for granted but still should be noted. Good work Matt, brings back memories of learning basic mechanics 30 years ago for me.
The bottle on that Rotella coolant you used said it is “concentrated”. That means it should be mix 50/50 with water - distilled is best. It will actually cool more effectively and have a lower freezing protection temperature if it is diluted per the instructions.
It's fun watching you remember that you are working in a heated sealed shop with all the bells and whistles.
Oh boy! That brought back memories of working on the drum brakes of my first few automobiles when I was a teenager, far too many years ago to count!
Thanks for so many memories, Matt. My dad had Jeeps all his life after he came home from WWII, and they all had snowplows. I learned to drive at age 14 in the mid-60s plowing snow with his '64 CJ5. Many were the times I'd take it to high school. Yes, I also learned auto mechanic skills working on that Jeep. Radiator changeout, installing new clutches, starters, and new brakes. Even constant body work, as they all rust out over time. I so wish I had that Jeep today. Jealous. 👍
I can relate totally! My uncle who lived close by, bought a 1947 surplus Jeep when I was about 8 yo. I helped him work on that thing until he got it back to original. I've owned, bought, fixed and sold Jeeps off and on ever since and I'm 78 now. I have a 1977 CJ5 the exact same color as Matt's with a T98 granny low 4 speed, PS, PB, 3.54 lockers front and rear and 9,000 lb winch. I live in a small town where everyone knows everyone so you can guess who gets called when someone gets stuck! Love them Jeeps!
One of my first vehicles I owned as a teenager was a ‘59 CJ5. Loved that thing. The simplest vehicle you could ever own. Perfect for someone learning to be a mechanic.
@@billmoran3812 👍 Exactly! I learned so much from my uncle that by the time I was 14, I had my own farm equipment repair business. My dad had bought me a set of combination wrenches and a 1/2" drive socket set for my 13th birthday. I still have some of those tools.
If you ever want to repair on check out C&C equipment the import most jeep part bodies frames ect.
@@emiliosolis5056 👍
The road’s not worthy of the Jeep Matt 🍻
None of them really are anymore..
But it is Off-Road Worthy!
@@mwnciboo thats perfect because a lot of roads now days are
Comparable to off road
@@young11984 so true especially in Pennsylvania 😂😂
@@calebcarinci2428 and in the UK, too! 😤
Those old Jeeps were awesome. They were meant for 4-wheelin' and work, they were barebones vehicles and practically hard to find. Definitely deserves a restoration or at least a refurbishing. Great video, Matt
It's so strange to see Matt working inside on a bench😂
Great trick on testing generator. I never knew that one. One tip is get some left handed drill bits and a lot of the time as you drill it counterclockwise the bolt comes out without using an easy out. (Easy outs tend to put outward pressure on the bolt and make the threads dig in thus making it harder to unthread than the left hand drill bit does)
Have a few LH bits for that reason - works way better than an EasyOut.
agreed I have a set of leftys for that purpose.
Matt, love seeing the old CJ come back to life. A few months before I was born my parents bought a brand new 1974 CJ5 with the 258 I6 and a 3 speed manual in it. When I was 15 that was the vehicle my dad taught me how to drive a stick in, so I've got a lot of fond memories of driving that thing around town with him. Before you let your better half drive it, you might want to do a little bit of upholstery work on the drivers seat. I'm pretty sure janky wouldn't be the word she'd use for the current state of that seat. 😄
Great video! Great to see someone actually fix the starter motor and generator so many channels throw them out when they just need a clean and lube!
okay you just called it out leaning to the driver side.. I was thinking about that when you were doing the starter!!😅👍👍. I'm so glad you pointed out the broken springs. 😅
28:20 Matt, what you saw was exactly correct. Generators produce little to no output at idle speed which is why you only saw battery voltage until you ramped up the engine RPM. This is why alternators quickly replaced generators after reliable high current silicon diodes were invented. For a given size alternators also produce more energy than generators and they're more efficient.
Thanks for answering all my questions. Before I even asked.🇬🇧☺
@@mickkelly6389 swap out to a 10si GM alternator to solve probs
Love the clean, smooth, concrete floor Matt, looks like heaven to work from. When you opened the door to go on the test drive, the lights in the new shop spoke of the progress you've made. Your dream shop is inspirational.
Hi Matt,
I have been keeping a cj2a running for the last decade after inheriting it from my dad. I ended up fixing the starter, replacing the generator with an alternator and generally replacing fuel and brake systems as needed. Very similar process to yours. I enjoy watching and learning from you. Thanks for taking the time to record and post. My only suggestion would be to spray some high heat black paint on the radiator to make the aluminum rad appear slightly more stock. Great work so far. Keep it up!
Matt proves yet again that it's all in the details!
Glad to see you’re taking care of the bosses Jeep.
From your beginning working in your garage to your dream shop you have come a long way not afraid of taking on most any projects keeps me watching you prove there’s still hard working people out there
Either his day jobs pays well or it’s the money from UA-cam.
@@jumpinjojo Or Both.
That Jeep would be perfect where I live!!
Dear Matt,
.
I’m a “city slicker” who really loves your channel, and I want to give you compliments.
.
Actually, I’m not so much of a city slicker: I’m a medium-skilled woodworker, me & a buddy installed a new water heater, a top-of-the line model, with hybrid (heat pump assist) & Wi-Fi. With all soldered copper pipe & fittings, I might add!
I don’t like getting dirty, but sometimes you have to! Afterward, you clean yourself & are all shiny again!
.
What I like about you is, you really get your hands & clothes dirty, but you’re smart with your brain, and your enunciation & speaking voice are SO EXCELLENT!
What I’ve learned: “Metal loves oil & grease!”.
.
Thank you very much, 😉👋🏽🛢️‼️
I love the sound of that jeep. It actually sounds like a jeep!!!
Now this was a great Diesel Creek video just the right length and great content, matt you get a 10 out of 10 and 5 star rating thanks again Matt awesome job
And a window behind the workbench pretty sweeet!
I remember my first CJ. The Ross steering box was so worn out I had about a third of a turn or more of play in the steering wheel. The top was dry rotted and leaked like a sieve, the rear springs were busted, the roll bar was barely bolted to the wheel wells, and everyone gave me grief about my "Ejection seat". It was the only vehicle I refused to wear a seat belt in (safer to be ejected, than incinerated), but damn, it was a lot of fun.
Many have already said it but seeing you working in the new shop really reinforces how awesome it is seeing how far you and the channel have come. I've been watching since my dad told me about your channel roughly when you got that Unit dragline, I think the first video I saw was the trench compactor getting forked off the trailer. It doesn't feel that long ago you were working on that thing getting it running in your garage, and doing initial groundwork like digging out roots and getting water out of the ground where the foundation of the new shed sits. And now you have this awesome new workshop to let you get your teeth back into these project vehicles. You've put in blood sweat and tears on everything you've worked on, you work hard, you're knowledgeable but don't BS if you don't know and it's fantastic seeing you succeed. You've inspired me and I'm certain I'm not the only one. I can't wait to see what the future holds for Diesel Creek and yourself Matt. Cheers from Tasmania Australia 👍
Your new shop is a real game changer for doing videos Matt! The Jeep is going to be a fun driver when completed.
Love watching your videos, I love your honesty about how things really are when working rusty bolts and stuff. Your the real deal and that’s why I watch your channel. Thank you !
No Diesel Creek video is ever too long. The more the better.
Love how your projects go like most of our projects go....taking twice as long with several head scratching moments. Fun video!
Just a friendly note - the coolant is concentrated mix. You should dilute it with water to at least to 1:1 ratio :)
And - I don't see the relationship coolant to fuel. It is not supposed to come in contact with fuel, so what different does it make whether you put it in a diesel or a gasoline engine.
@@laoluu There is no reason for comming in contact with fuel. You must have misunderstood my message.
I’m jealous of the halverston wood splitter at the end
Let’s see a full wash, buff it and polish it too. (No fixing existing dings/scrapes, but make the paint that’s there shine)
We had that same master cylinder on the old Clark forklifts and a cool thing about them is you can actually bleed them without cracking a bleeder screw. Just add fluid and pump the brakes alternate between long and short strokes kind of like you showed in your video with the cap off and the fluid returning, after awhile presto you have brakes 😊
I love how you just jump in and tackle any project, large or small. Thanks for sharing your time and adventures with us. Great camera work, editing and music. Stay safe. Peace
Put anti- sieze on all bolts that are part of the cooling system when you put them back in. It helps keeping them from getting rusted in the block.
About 1000 years ago an old mechanic taught me to put the radiator cap on the first notch when bleeding the air out. Less mess.
It really is a wonderful thing to know you can still take something that's worn out, abused over time, or simply neglected and disassemble it, lubricate and clean it, put it back together and watch how well it works. I really have gotten tired of simply replacing parts on things today. Yes, we live in a disposable world now, but man I really enjoy fixing things without replacing them! Great beginning 20 minutes of the video. I can't wait to see what else you come across.
To see you enjoying working in your new shop brings a smile to my face. Keep enjoying and sharing!!!
I always drill a 1/8" hole in those completely closed thermostats, this way it will push the air thru and have a tiny bit of flow.
Very cool you got the jeep running!
Keep em coming!!!!
Anyone else give a pre-emptive thumbs up before the video even starts? 😁👍
Nope
Morning coffee and Diesel Creek with Matt! Ahhh starting off great!
Glad to see the old Jeep getting a little love.
And I really enjoy the longer format. Seeing you working through issues (like many of us have done so many times) is very rewarding. Thanks!
The only suggestion I'd make is that there are many sources out there for upgraded Jeep components (such as alternator replacements). They will serve you well in terms of both functionality and ease of maintenance.
Also very happy to see you able to perform your mechanical resurrections in a clean well lit shop. Well done!
Your a great field and bench mechanic. I was both long ago but since I turned 80 there is no more laying in the dirt with my face inches from a hot oily or both undercarriage part. Today I have a nice bench like yours and a stool with a small pillow. This allows me to sit at my bench in comfort and waste hours if not days fiddling with something or another.
My 3 year old son and I love to watch your vids. Keep it up.
Hey Matt. I was thinking "If he blows that, it's gonna go everywhere! How long is this shop gonna stay nice?" I'm super glad you had the same thought. Love the new shop. Loved watching it being built. Thumbs up.
It's still strange to see you working inside on a dry, even ground😄 That workshop is gold!
wonder joy and glee - every hurdle crossed - DC is the man
Hey Matt! I expected you to pull your Kroil off The shelf and hit the 6 sheet metal screws that looked like they were going to give you a problem. 😊 I'm really liking your remove teardown, inspect, cleanup, reassemble approach to the starter and generator. One of the reasons we like the old iron is because it still works. Just needs a little attention. | Think you outta drop that gas tank and clean it out? Run your salvage fuel through a paint strainer so you don't find yourself stranded on the side of the road when that "plug" finds its way back into the fuel line.
Matt, thanks so much for this video. 1st, it takes me back 40 years when i still worked on my own cars and the only cars that disk brakes were too expensive for me to afford. 2nd, we saw this in the last video and i wondered what happened to it. 3rd, it is great to finally see you able to really work in the shop! Good show!!
I always enjoy the teasers at the end of your videos. You’ve got to love Clint and C&C equipment. Looking forward to seeing how you clean up all the downed trees around your property
nice to see someone simply degunking an old starter and generator, which is what is the problem with the vast majority, rather than replacing them.
I love the spark plug wires arching across every time you rev it up lol. Still a work in progress
Matt if you ever have the option, replace your radiator hoses with silicone hoses. They were originally developed for aircraft and they never go bad. We used to used them in the fleet of vehicles where I worked and we stopped having overheating problems/failures. Finding them and ordering silicone hoses does cost a but more up front but it saves so much in the long run it is worth it. Guarantee!!
As a fellow CJ owner I really enjoy your videos about the Jeep. Bring on more.
Such a great project. My favorite way to spend a day. You will use it more than you realize. I love driving my old jeep, it's like nothing else. Thanks for taking is along.
Yep, the same kaboom happened on my 1950 Power Wagon. The lines close up and hold some air/fluid in the middle. Heat expands and then poof!
Seeing you service the starter and generator took me back to my time in the UK military as a mechanic in the 1970s.
Love it when a plan comes together...but as always still more to do. Besides which...you have the hurdle of state vehicle inspection to jump over. With your skills and tenacity you'll get 'er done. Soooo nice to see your dream shop working for you. Well done sir...well done.
After you puled back into the shop from your first test drive I saw it leaning to the driver side and I thought new springs & shackles. During the brake job I saw the shocks were shot and front springs did not look well.When you rebuilt the starter and generator I was right there with you,I've rebuilt those many times in my life I would have even rebuilt the wheel cylinders just for the heck of it I still have my brake cylinder hone! LOL .Whoever learnt you how to mechanic must have been "Old School" and that's a skill to have forever. I'll be looking forward to the spring job video!!
Matt, Matt, Matt hoses belts and fluids should be number one priority for your basic restoration. Other than that potentially a great fun find.
You are actually lucky the bolt sheared off while you had it in the shop. Great video.
HEY! What a nice surprise to have a video waiting from Diesel Creek! Good morning Matt and thumbs UP! 👍 I hope that everybody has an awesome day! 💪
Great to see that it is becoming more ready than just rough!
Trick I've learned for old rusty bolts is get em hot, then blast them with a upside down can of air to freeze it. Much more success when you get to the east outs that way.
When it comes to brakes, I always like the peace of mind of all new parts. Especially on old stuff.
Truly great watching you not only save this ole gal but also giving her a second chance at life!
on thermostat i usually drill a small pilot hole in the flange area that way it always will purge the air , it helps them open a bit faster.
The reason that you clean between those days because every other one is positive and every other one is negative. Cleaning between them helps keep that from shorting out from from one to the other
Great episode. I used to rebuild starters and alternators and generators. I love cleaning up old equipment, and making it run like new again. Didn't Prestolite build the ones you are working on? That Jeep is great.
I've gotta say, I live vicariously through your channel- you're living my life! LOL All the old H.E. gear, the old jeep, the workshops, tools, odds and ends, the new workshop. Yep, living the dream!
I have a 1977 CJ7 that was a barn find. I slowly restored and upgraded every system. I now daily drive it. Top and doors off and just cruise. It is now a beautiful vintage family cruiser. I subscribed to your channel because of this Jeep. Keep up the good work on it.
Awsome to watch someone try to find a issue and fix it rather then just doing parts swap, thats how my father tought me 😅
Matt i just want to thank you for all the hours of entertainment you provide cheers mate
I learned to drive with a 49 Willys. I got my first set of tools at 16. We tore the whole thing apart and rebuilt it. It was great for off-roading. It was a lot of fun. Wish I had it now! Happy trails!
One way to help prevent an air bubble beneath the thermostat, is to drill one or two 1/8 inch holes in the flat plate of rhe thermostat. It slows the warm up a little, it does allow air to bleed.
That brake line was probably internally collapsed and was holding pressure on the front brakes. Then when you went to heat the line you were building pressure and it blew apart. For your safety please use two more jack stands and not the jack alone when working under a vehicle. Accidents happen all the time but you are far away from where anyone could hear you screaming for help. Keep up the good work.
Matt: you have to use jackstands for every axle. Safety first!
At last someone with a sensible, obvious, safety comment
This
Nice work on the old CJ. Broken springs and a lean to the drivers side was really common fo them. Most of the time they only had a driver so all the weight was on that side. For me no more manuals since I list my right leg, can't manage a gas pedal and a clutch. Keep having fun and good luck to you.
Ventrac to the rescue. Those open jeeps are a lot of fun. In the late 70's 5 of my friends had CJ5's.
Matt I understand that switch to working inside mentality. I have work outside in the road on the street in the parking stall underneath the tree since I first picked up a wrench now I have a very nice two car garage that consistently catches me in the same thing.