I've been on a 4Runner kick as they are one of my dream SUVs and I've got to say this is a great tutorial of how to install this grill. I'll be sure to come back to it when I get my 4Runner one day 😁
Was my dream car and I finally manage to for it. Don't give up hope. Save save save. The market is beginning to open up a bit but keep in mind Toyota Runners are rarely ever on sale, as they never saturate the market completely. Made only in Japan so that would be hard for them to do even if they wanted to. However, starting this fall the dealerships will be discouraged from marking them up (in some case between 5-10 thousand) as they have since 2020. Also, the 6th Gen is right around the corner, so they will have to clear their 5th Gen inventory to make room. Best of Luck, future Running mate.
Great video, thanks for posting. It's totally my own ODC but I can't stand watching people not clean dirty stuff while their doing this kind of work. LOL
I have a 2022 off road and the upper grille removal is killing me.. I have both ends off but the tabs on the back of the Toyota logo are not budging and is stopping me on getting the upper portion off 😩😩😩
Hi! I cannot get assurance from my Toy dealer that these part numbers will fit on the 2022 TRD ORP; PZ327-35053, PZ323-35056, and the black lower valance 53901-3520. Can you please help. I don't wish to be stuck with 600 bucks worth of parts I can't use. Thanks!
It may be because you didn't select TRD Pro trim level and the site thinks it only fits that trim. Maybe someone with a 2016 could weigh in but I wouldn't think it's an issue.
I’ve got a 22 SR5 is it possible to just get the heritage grill without the bottom valance OEM my bottom valance is color matched white and would like it to stay that way?
PLEASE NOTE: The grille need not be yanked and should not indeed be yanked with brute force. Instead the 6 tabs should be pressed upward one at a time while releasing that side of the segment!!
(PZ323-35058 Garnish & PZ327-35056 Upper Grille) just got mine same year and trim as yours. Ordered from Larry H Miller Toyota Salt Lake City, lowest price I found for OEM parts.larryhmillertoyota.com
I also have a brand new 2021 sr5..toyota web site says it wont fit my 2021.... 2020&2021 have the safety sense panel im guessing thats why... ive seen one of the after market kits has a notch at the bottom of the fasia panel for the safety sence panel in the lower grill
The dude said it was the oem version. So just google “Toyota 4Runner TRD pro grill”. It took me less than one minute to find the part number...pz32335056 .
As this is a Toyota OEM grille, the lettering was pre-installed and required no additional steps to attach the letters to the grille. That being said, I believe the manufacturer used clips to attach the lettering.
Where is a good place to purchase the legacy grill? So many people have the same white 4Runner as I do, so I think it would be good to be original and get the same one as you. Thanks!
ugh I'm at a road block. the part that you did in "one tug" haha.. mines not sliding right out like that. it looks like there are more clip-type things stopping it that weren't mentioned in the video
There really should only be the two clips and 10mm bolt holding that portion to the vehicle. I recommend giving it a good "wiggle" to loosen before pulling off the vehicle.
To my knowledge, the same grille should work with the 2019 ORP. Mine is a 2018 ORP. I recommend comparing the new upper grille portion to the one you removed from the vehicle. All clips and screw holes should line up.
Not sure about this. One way to find out is to try it and see. If it doesn't work after that, you can just peel the plastidip off of the sensors. Dipyourcar says that it shouldn't affect your sensors.
Sorry, you asked about the TRD pro grille, not the Plasti dip... If you buy the older version of the grille you would have to Dremel areas out of the middle where the sensor is. If you buy the newer version of the pro grille it will already have the areas notched out.
@@9to5Escape got it! Yea I just doubled checked earlier. I need the grille trim for 2020-2021 that has the black bar with the cuts in them. Thanks for the quick info!
I thought it was a fairly easy install. If you still don't feel confident after watching the video then maybe have someone help you or get someone else to install it.
@@9to5Escape I installed it myself on my 2021 SR5 Premium. The lil downside is that when I applied the garnish part, I placed it a lil too far to the right.
I think there are sensors in the newer models that the grille may interfere with. I would suggest calling your local dealership to get the correct part for your model year.
I would confirm the fit with a local dealer. I believe the newer 4runners have front sensors that the bumper may interfere with and require a different part number.
Sir can you answer our question please do you have link for those 2 things so we can buy it ....don’t make a video if your not answer out question its gonna be useless video if you not answering the question. Thank you sir.
I got mine from mcgeorge online parts, both OEM the upper: toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-grille-radiator-up-pz32735056?yotpo_token=5cb22021d761cf49d5df1915278b546d7d7ab508& the garnish: toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-garnish-fr-bumper-pz32335058 came out to about $450 with shipping
@@leelaiabraha227 hey thanks for sharing that link, I have SR5 2014, did they sell this to you without owning a trd pro 4runner? Or without the VIN number of a Toyota 4runner pro?. Also were you able to fit this on a SR5? Or similar? Please answer friend
It works, did mine with an SR5 2020, just to add one thing though, you have to sacrifice the two chrome strips, was not a problem for me cuz’ i hate chrome.
I've been on a 4Runner kick as they are one of my dream SUVs and I've got to say this is a great tutorial of how to install this grill. I'll be sure to come back to it when I get my 4Runner one day 😁
Wouldn't trade it for anything. Hopefully the car market cools down a bit so you can get one yourself!
You end up getting one yet?
Was my dream car and I finally manage to for it. Don't give up hope. Save save save. The market is beginning to open up a bit but keep in mind Toyota Runners are rarely ever on sale, as they never saturate the market completely. Made only in Japan so that would be hard for them to do even if they wanted to. However, starting this fall the dealerships will be discouraged from marking them up (in some case between 5-10 thousand) as they have since 2020. Also, the 6th Gen is right around the corner, so they will have to clear their 5th Gen inventory to make room. Best of Luck, future Running mate.
Watched the video twice. Installed completely and perfect inside of 25 minutes. Thank you for the video
Just added the kit to my 21 Off Road Venture. This video made it super simple. Thanks!
Thanks for the thorough video, just did mine in about 10 minutes!
TRD pro is overkill for me as I mostly commute and camp, not offroad, BUT I really like this look more
Thank you!
Doing this next weekend!!! Watching your vid to install!
It looks sooo much better !❤
Great video, thanks for posting. It's totally my own ODC but I can't stand watching people not clean dirty stuff while their doing this kind of work. LOL
Do you have the link for the 2pc part you installed? Ty
Please see the description.
I mess up putting the pro grill on. I had a big ass gap one side.
What can you do if you break one of the sides of the clips holding the top grill cover, that’s mounted to the middle bumper unit?
Thanks fore the video. Should make my install simple. Minor annoyance: The end result in your tutorial is blocked by an advertisement.
would this oem trd grill fit 2024 4runner? since also 5th gen
I have a 2022 off road and the upper grille removal is killing me.. I have both ends off but the tabs on the back of the Toyota logo are not budging and is stopping me on getting the upper portion off 😩😩😩
Hi! I cannot get assurance from my Toy dealer that these part numbers will fit on the 2022 TRD ORP; PZ327-35053, PZ323-35056, and the black lower valance 53901-3520. Can you please help. I don't wish to be stuck with 600 bucks worth of parts I can't use. Thanks!
Thank you for showing!!!
Thnx great tutorial
Do you need just the grille and the radiator? Website online is saying I need a radiator bracket?
That looks so much better than that dopey stylized "T" Now get yourself a Teq badge for the lower grille
Hey bro you have you had to pay for all three of the stuff ?
You so lucky some front grill its take time and so hard to pull it hard
If you're having trouble try using some heat.
I have a 2016 4runner. The website says it won't fit a 2016. Is that true? I find that its exactly the same build. Anyone have problems?
It may be because you didn't select TRD Pro trim level and the site thinks it only fits that trim. Maybe someone with a 2016 could weigh in but I wouldn't think it's an issue.
I’ve got a 22 SR5 is it possible to just get the heritage grill without the bottom valance OEM my bottom valance is color matched white and would like it to stay that way?
Might be worth a call to the dealer to see if they sell the single part instead of the kit.
Does the upper grill secure the cover? Just wondering if the cover can be pulled off or fall off if the 3m tape fails..
That type of 3M tape is VERY strong if applied correctly.
PLEASE NOTE: The grille need not be yanked and should not indeed be yanked with brute force. Instead the 6 tabs should be pressed upward one at a time while releasing that side of the segment!!
What are the OEM Part Numbers and will this work on a 2020 TRD Off Road Premium
(PZ323-35058 Garnish & PZ327-35056 Upper Grille) just got mine same year and trim as yours. Ordered from Larry H Miller Toyota Salt Lake City, lowest price I found for OEM
parts.larryhmillertoyota.com
@@TotoWolffsBigHog do you need yo own a Toyota trd pro VIN to get those parts?
Now in the description.
Can this fit my 4Runner off road premium 2021? Would appreciate your reply 🤘🏽
Yes it will fit.
I also have a brand new 2021 sr5..toyota web site says it wont fit my 2021.... 2020&2021 have the safety sense panel im guessing thats why... ive seen one of the after market kits has a notch at the bottom of the fasia panel for the safety sence panel in the lower grill
@@birchwhitehd it actually worked for me, check out my insta @_mack.runr
@@birchwhitehd what did you end up doing?
Hey guys just bought my 2021 4Runner yesterday. Where can I buy this parts ? Thank you !
What about the bottom black piece?
The dude said it was the oem version. So just google “Toyota 4Runner TRD pro grill”. It took me less than one minute to find the part number...pz32335056 .
Not sure if it’s the best price but here everybody...
parts.toyotadm.com/oem-parts/toyota-grille-pz32735053
@@RoadKill4Two did you buy the part?
Link is now in the description.
probably a dumb question, but should this be the same installation on a 2022 sr5 model?
Most likely but I think the newer models have the Toyota Safety Sense sensor in the front grill that requires a different part #.
Did you replace the lower part of the bumper to make it black? Mine is silver and I prefer the black
Plasti dip. Sounds like you found the video. 👍
Why is OEM using double sided tape?
Not sure but it's easier than having to drill your own holes. The tape is holding up well.
question: are the letters 3m tapped only or are they screwed down too?
As this is a Toyota OEM grille, the lettering was pre-installed and required no additional steps to attach the letters to the grille. That being said, I believe the manufacturer used clips to attach the lettering.
Where is a good place to purchase the legacy grill? So many people have the same white 4Runner as I do, so I think it would be good to be original and get the same one as you. Thanks!
Manqzo83 trdshop.com has the oem grille
Did you ever get an answer to your question because I have the same question
Anyone know where to buy just the emblem letters? Mine got stolen, I just need the "TOYOTA" letters by itself. Thank you.
You could possibly try the dealer and call them up for the part number.
ugh I'm at a road block. the part that you did in "one tug" haha.. mines not sliding right out like that. it looks like there are more clip-type things stopping it that weren't mentioned in the video
There really should only be the two clips and 10mm bolt holding that portion to the vehicle. I recommend giving it a good "wiggle" to loosen before pulling off the vehicle.
Parts list?
Sick!!!!!! Did you paint the Valance or get them wrapped? Im thinking about wrapping them black
It came black from the dealer.
Will this work for a 2019 trd orp? I had 4 extra pull up screws to get out. Top part still seems stuck and not pulling off.
Ok. Got it all finished except putting the top part back on. Doesn't seem to be able to clip back in. Any ideas?
To my knowledge, the same grille should work with the 2019 ORP. Mine is a 2018 ORP. I recommend comparing the new upper grille portion to the one you removed from the vehicle. All clips and screw holes should line up.
Can you follow up? I got a 2022 orp. I notice the parts from the description only say up to 2019.
Is that black piece hard to put on the bottom that matches
If you're talking about the bottom valence, that was plastidipped black. You can see a video of the process on our channel.
Where can I purchase these with the letters already attached ?
OEM part. See the description for link.
Looks way better, nice work.. How’s the plastic dip holding up?
Great! Some small rock chips here and there but nothing too bad to make me want to redo it.
I have a 2021 4runner TRD off road. Does the 2020-2021 trd pro grille mess with the sensory system?
Not sure about this. One way to find out is to try it and see. If it doesn't work after that, you can just peel the plastidip off of the sensors. Dipyourcar says that it shouldn't affect your sensors.
Sorry, you asked about the TRD pro grille, not the Plasti dip... If you buy the older version of the grille you would have to Dremel areas out of the middle where the sensor is. If you buy the newer version of the pro grille it will already have the areas notched out.
@@9to5Escape got it! Yea I just doubled checked earlier. I need the grille trim for 2020-2021 that has the black bar with the cuts in them. Thanks for the quick info!
@@jinnotjim where can you find that? I got a 2022
How do you reattach it? I had mine on for about 4 years and it came off.
The valence? It's held on by double sided tape.
I would buy more double sided 3m tape
What are the two part numbers needed? Thanks
See the link in the description.
Put the link where you found this in description box pls
Does this guy not read his comments
It's there now.
Is it really easy to install or should I find someone to do it for me? I drive a 2021 Toyota 4Runner SR5 Premium
I thought it was a fairly easy install. If you still don't feel confident after watching the video then maybe have someone help you or get someone else to install it.
@@9to5Escape I installed it myself on my 2021 SR5 Premium. The lil downside is that when I applied the garnish part, I placed it a lil too far to the right.
Just think how much Toyota makes off of these plastic parts.
Anyone know if this will work for a 15 limited?
Might be worth a call to your local dealership parts department to confirm.
Will this fit a 2022 ORP ? It says only up to 2019. Anyone? Someone? Please lol
I think there are sensors in the newer models that the grille may interfere with. I would suggest calling your local dealership to get the correct part for your model year.
Does it come with the bottom portion for the bumper as well?
The bottom portion is the stock bumper on the TRD Off-Road model. We plasti dipped it in a previous video. Check out or channel for the other video!
@@9to5Escape Cool! I would rather order an OEM matte black one
whats the ideal temperature for the adhesive? how cold is too cold? and how is the adhesive holding up?
I installed the OEM one today on my 4Runner and it said to apply heat if ambient temperature is below 15C which is about 60F.
Jeff Poirier do you have part number on what you installed?
@@victorchicas8848
PZ323-35058 - Garnish specifically for the 2020 4Runner.
PZ327-35056 - Upper Radiator grille.
These are often sold together.
@@victorchicas8848 part numbers are in the description now too
How is the flexi holding up?
If you're referring to the plasti dip per bumper, it's hold up great. Some minor rock chips but nothing too bad to make me want to redo it.
Does this work on the 2020
4 runner sr5
I would confirm the fit with a local dealer. I believe the newer 4runners have front sensors that the bumper may interfere with and require a different part number.
Any links where you got the parts at?
Now in the video description.
Sir can you answer our question please do you have link for those 2 things so we can buy it ....don’t make a video if your not answer out question its gonna be useless video if you not answering the question. Thank you sir.
I got mine from mcgeorge online parts, both OEM
the upper: toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-grille-radiator-up-pz32735056?yotpo_token=5cb22021d761cf49d5df1915278b546d7d7ab508&
the garnish: toyotaparts.mcgeorgetoyota.com/oem-parts/toyota-garnish-fr-bumper-pz32335058
came out to about $450 with shipping
@@leelaiabraha227 hey thanks for sharing that link, I have SR5 2014, did they sell this to you without owning a trd pro 4runner? Or without the VIN number of a Toyota 4runner pro?. Also were you able to fit this on a SR5? Or similar?
Please answer friend
@@eclinor they did ask for VIN but I don’t think it was required, i think it was instant verification that the part would fit my vehicle.
@@leelaiabraha227 thank you for answering, I will check if I can buy it without been ask for that
Links now in the description.
Question, You have Part 1, Is all I need to purchase is Part 2?
I updated the description with a third part. Part 1 is already on the car and the items to purchase are Parts 2 and 3.
Can this be done to the SR5?
Yes but it depends which model year you have. Check with the dealer to see which parts are compatible with your year and trim.
Next video: how to clean engine bay
If it ain't dirty, you aren't doing it right.
Hood scoop needs to be black also .
Does fit for 2022 4runner?
You might have some issues with the new sensors in the grille. Please check with a dealership before ordering the parts.
How long did this take? 8hrs?
Only a couple of hours. It took more time to record everything than it did to install it.
The “toyota” grill is pretty expensive just for that (it’s $400)😮😭
How much was the OEM version?
See the description for a link to the parts and prices.
Will that take fuck up the paint?
The double-sided tape? Worst case it may leave some residue after some time but nothing that shouldn't be able to be removed.
Where did you buy your OEM Grille?
See description for the link.
Could you tell me the part number of that grill?
The description has links and part numbers.
@@9to5Escape
Thank you very much.
We're did you buy
Straight from the dealer. Part number and links are in the video description.
Any chance on getting that link?
In the description now.
How can that engine compartment get so filthy when you live on a paved road ? LoL
I would clean that first...
Lots of camping trips on forest roads.
How much did it cost?
See the description for link.
Will this work for the Limited trim?
For the grille the TRD pro one fits the limited models. Assuming 5th gen of course.
@@9to5Escape Awesome, thank you for the response!
@steak Johnson I ended up using Plasti Dip on my grille and it turned out really well. Much cheaper alternative!
@steak Johnson No worries, I actually only Plasti Dipped before the fog lights so I taped it off right before them.
Those ten screws alone I already decided to pass on this mod lol
Lol idk If you’re serious or joking but this whole process is super easy bro. You should give it a go. Totally worth it
I wonder if this will work on the 2020
smallz1975 me too. Just picked up a new one and want to replace the grill.
@@gschu39 Awesome, I just signed paperwork for a 2020 in Barcelona Red, I can't wait to pick it up!
It works, did mine with an SR5 2020, just to add one thing though, you have to sacrifice the two chrome strips, was not a problem for me cuz’ i hate chrome.
@@RCGJR_ what part numbers did you get for the 2020?
@@smallz1975 Just got my 2020 white yesterday, planning to do the grill also
Yeah, we need some part numbers.
In the description now.
Nope its not centered. Its a tad to the right. You effed up. Lol
Almost $700 for that? No thanks. I'll get the aftermarket one for half that and use the other half for other stuff.
Hahaha, this dude is absolutely no sense! 🤪🤪🤪🤪🤪 just doing his stuff! Doesn't care about your questions! Hahaha! 😜
Bro buy a drill 😂 this would have cut off so much time
hahaha rip that sucker off!
hahah i flinched for a second
How the fuck does everyones grill pop off easy af? My middle section where the emblem is wont pop out.
Did you get it out?