One update. There are the factory clips that are built in to top part that you reuse. I noticed the passenger side in the corner kept popping out about 1/4” or less when I drive. I removed one of the pins and got it to line up with zip ties. Not sure if I didn’t get the clip back in correct, but it was in and I had movement. Now I have it tight. Things to keep in mind because there is those “body painted” clips on the upper. Hope that helps.
Just finished installing the TRD Pro Grill and amber raptor light on my 2023 ORP. It took a bit longer than expected but it looks great! Thanks for this video....well done
Ordered mine yesterday, i'm excited and can't wait. Second product i purchase from you guys. I was surprised how fast you guys shipped everything out the first time.
I got this one because the letters screw in. Definitely set the letters 1st before tightening and use blue tape to mark the top of the "O". Then I added some crazy glue on the screws to adhere to the plastic when I tighten the letters down. Hope that helps.
4Runners are pretty new to me, but I’ve been doing some research over the past couple of months. I’ve had five jeep wranglers and one gladiator and I think it’s time to make the switch. My question is if I want to do a small build, nothing crazy what’s the best trim level to start with? I’ve heard Trd off-road premium? That still gives you all the off-road goodies without the roof rack and the appearance stuff, correct?
Welcome over to the dark side lol. I think you'll enjoy your 4Runner. But yes, I would agree the TRD offroad premium is a good choice. That's what we have.
We have been shipping grilles. Yours might be in there. Keep an eye out for tracking. If you want further updates on your order please send us an email to support@yotaxpedition.com
I had a cheap bumper garnish that flew off on the Highway. It irritated me that I constantly had to re tape it. Does the upper grille hold the garnish down and back?
Any concerns with connecting to the IGN fuse? I have read some stories on other forums where people say to avoid the ignition fuse due to if it blows you’ll get stuck without being able to drive the vehicle. Personally was considering using the TAIL fuse as a result but curious your thoughts since some are saying they will turn off when you turn your low beams off as well.
The TAIL fuse will be fine as long as that fuse location gets power only when the ignition is on. Some people have issues using the IGN fuse location but most times it's install error or a faulty fuse tap. You can use a different location if you're more comfortable with that.
Will this product work with a 2024 4Runner TRD Off Road Premium? All references in the video and the website state 2014-2023. Thanks in Advance! I am trying to catch that Black Friday special. Ready to order now!
I have a question. If I am installing the OEM heritage cover, do I need the adhesive promoter? It did not come with it. But was curious if that is necessary?
My dealer said the stock Toyota grill on the 2023 SR5 premium is a safety sensor. They were going to charge me $600 (2500 total for parts and labor) just to reconfigure the sensor after installing the new predator style grill. How would I handle that sensor with your product/installation?
Just got mine on my 2023 ORP today! Good quality, good price, I'm happy. Don't be like me and start threading the letters with the screws from the original grill. That wasn't smart.
For the topography letters, are you guys gonna add them as an option on the website, or should we order the black letters and add a note that we want the topo letters?
I see the option is not there...I'll have to check on that. If you want to place on order with Topo letters please shoot us an email at support@yotaxpedition.com
Other videos on UA-cam show that you can tap into the fuse box right next to your battery instead of going through the firewall just seems like it’s easier installation doing it that way.
If you want to do that then you need to cut an opening for the wire or drill a hole. Otherwise the lid will not close properly or you will probably cut the wire in the process of trying to close it.
Installed mine last week, no lights heard that many people have issues with them. Either burning out or electrical issues with the computer and fuse box.
Perfect instructions. Perfect. Everything went as described and couldn’t be happier. 💪🏻 Well done!
Awesome! Glad we could help you
One update. There are the factory clips that are built in to top part that you reuse. I noticed the passenger side in the corner kept popping out about 1/4” or less when I drive. I removed one of the pins and got it to line up with zip ties. Not sure if I didn’t get the clip back in correct, but it was in and I had movement. Now I have it tight. Things to keep in mind because there is those “body painted” clips on the upper. Hope that helps.
Wow, you work and the way you explain the installation is so professional. Thank you.
Thanks! 😊
Ordered mine today.
I like the blank one with no letters personally, I hope it's worth it! Thanks for the info guy
Thanks Jonny! Let us know how it works out for you.
Just bought my grill from Y’all to show support. Appreciate all the videos and ur hard work Cory
Appreciate it!!
Just did this today. I also tackled the front valance while doing this, so I could get to the top clips of the valance.
It's definitely easier with the bumper off.
Thank you so much for this video! Perfect and clear instructions!
Glad it was helpful!
Well done and thorough instructions guys. Good job.
Thank you!
Seeing a video of your product installation sold me. I'm subscribed and will be upgrading my 4Runner thru you. Thank you.
Awesome! Appreciate the support!
Just did this on my 2024 sr5. Love it. Great product and great video to walk us through the install.
Awesome! Glad we could help
Just finished installing the TRD Pro Grill and amber raptor light on my 2023 ORP. It took a bit longer than expected but it looks great! Thanks for this video....well done
Glad you're happy with the outcome and that we could help with our install video.
Finished my Yota pro grille, silver letters and 3 Raptor light install this weekend. Videos were a great help! Ordering my black balance next.
Awesome! Glad we could help you
Ordered mine yesterday, i'm excited and can't wait. Second product i purchase from you guys. I was surprised how fast you guys shipped everything out the first time.
Awesome! Thanks for the support! If we have it in stock on our shelf, we try to get it shipped out the same day or next day.
I hope you guys will have Canadian shipping this time next year when I get my 4Runner
Is there anything that can be done if the upper grille cover’s clips break on removal? Causing it to not stay flush after reinstalling.
Just ordered mine with the black topo and all the other badges and emblems with the black topo. I can’t wait lol
Awesome! Thanks for the support!
I got this one because the letters screw in. Definitely set the letters 1st before tightening and use blue tape to mark the top of the "O". Then I added some crazy glue on the screws to adhere to the plastic when I tighten the letters down. Hope that helps.
My “T’s” were crooked.
Other than than the OEM pro grill this is the best aftermarket grill.
We appreciate that!
Nice vid very informative, will that grill work on a 2024 off road premium?
Yes it will work on a 2024 model.
What about fading of Yota’s grilles? (Compared to OEM)
4Runners are pretty new to me, but I’ve been doing some research over the past couple of months. I’ve had five jeep wranglers and one gladiator and I think it’s time to make the switch. My question is if I want to do a small build, nothing crazy what’s the best trim level to start with? I’ve heard Trd off-road premium? That still gives you all the off-road goodies without the roof rack and the appearance stuff, correct?
Welcome over to the dark side lol. I think you'll enjoy your 4Runner. But yes, I would agree the TRD offroad premium is a good choice. That's what we have.
I'm thinking I may put some blue thread locker on the letter screws just to make sure they don't vibrate off over time.
It won't hurt!
Can I order the grill with the Toyota letters pre-installed on it?
Any estimates as when these will be back in stock? I ordered one and got an estimate for September. Is this accurate?
We have been shipping grilles. Yours might be in there. Keep an eye out for tracking. If you want further updates on your order please send us an email to support@yotaxpedition.com
I put in the grille and raptor lights on my 2022 it works perfectly fine but now I have a brake over load and airbag light on
I had a cheap bumper garnish that flew off on the Highway. It irritated me that I constantly had to re tape it. Does the upper grille hold the garnish down and back?
Any concerns with connecting to the IGN fuse? I have read some stories on other forums where people say to avoid the ignition fuse due to if it blows you’ll get stuck without being able to drive the vehicle. Personally was considering using the TAIL fuse as a result but curious your thoughts since some are saying they will turn off when you turn your low beams off as well.
The TAIL fuse will be fine as long as that fuse location gets power only when the ignition is on. Some people have issues using the IGN fuse location but most times it's install error or a faulty fuse tap. You can use a different location if you're more comfortable with that.
Once the black cover is installed with the double sided tape, how difficult would it be to remove this if ever desired?
It's going to take a bit of force. I would park your truck in the sun for a bit before trying to remove it. That should help.
Will this product work with a 2024 4Runner TRD Off Road Premium? All references in the video and the website state 2014-2023. Thanks in Advance! I am trying to catch that Black Friday special. Ready to order now!
Yes it will work, we just need to update the year range.
I have a question. If I am installing the OEM heritage cover, do I need the adhesive promoter? It did not come with it. But was curious if that is necessary?
You will be fine without it as long as you mounted to a clean surface.
Will OEM overlays fit on the letters with this kit?
My dealer said the stock Toyota grill on the 2023 SR5 premium is a safety sensor. They were going to charge me $600 (2500 total for parts and labor) just to reconfigure the sensor after installing the new predator style grill. How would I handle that sensor with your product/installation?
Our grille does not require you to mess with the safety sensor. That is also a ridiculous price to install a grille.
@@yotaxpedition awesome!
Yes it is. I definitely laughed out loud.
Just got mine on my 2023 ORP today! Good quality, good price, I'm happy. Don't be like me and start threading the letters with the screws from the original grill. That wasn't smart.
For the topography letters, are you guys gonna add them as an option on the website, or should we order the black letters and add a note that we want the topo letters?
I see the option is not there...I'll have to check on that. If you want to place on order with Topo letters please shoot us an email at support@yotaxpedition.com
@@yotaxpedition Email sent, thanks again!
Any issues with installing only 2 screws to that top bracket? Why can’t all 4 be screwed on?
No issues at all with only 2 screws.
Other videos on UA-cam show that you can tap into the fuse box right next to your battery instead of going through the firewall just seems like it’s easier installation doing it that way.
If you want to do that then you need to cut an opening for the wire or drill a hole. Otherwise the lid will not close properly or you will probably cut the wire in the process of trying to close it.
Is there a (noticeable) quality difference between the Yota X and OEM grilles?
It would be hard to tell the difference between ours and OEM. Also our letters screw on where the OEM letters stick on.
Installed mine last week, no lights heard that many people have issues with them. Either burning out or electrical issues with the computer and fuse box.
If you purchased the lights from us, please reach out to our support to and we will help you get things sorted out.
Will double sided tape survive Arizona heat!?!?
If anything it should make it stickier lol
Awesome, thanks.
What size was the drill bit for the letters
1/8" drill bit
Where can I purchase the lettering?
When will the pro grills be back in stock? The one I ordered has been on back order for a while.
Hey Robert, your grille shipped and is suppose to be delivered today. Double check your email for a tracking number.
Hey I just got the tracking update. Fantastic timing! I appreciate you guys! Much appreciated service!
Will the screws rust up overtime?
The screws are chrome plated to prevent rusting.
What happened to the Letters. after stall i dont see at the front grill
I have the aux power kit, how would I make the connection to that for these lights?
Just run the power and ground straight into the power kit.
@@yotaxpeditionso I just cut the ends ?
Do you know which fuse allows me to have the raptor lights turn on when I switch on DRL?
Instead of using a fuse tap, use a wire tap and tap into the wire at your running light bulb.
What size drill bit to drill the holes for the Toyota letters?
1/8" drill bit
what size screw bit size for making the holes?
1/8" drill bit
Need more on 2020 crewmax Tundras
We just started doing 3rd gen Tundra content.
Would love to see blue lights and letters
Market for that would be very small which makes it hard to invest money in to it. You can gladly paint the letters if you'd like.
Does this fit 2022 SR5 models?
Yes it does!
Does this fit trd off road 2023
Yes, it will fit that.
Its fit on 2018 4runner limited??
Does not fit limited models, sorry.
Does it mess with the sensor?
We have had zero issues with the sensor.
My dash light came on
Mine too , brake overload and airbag lights
Yeah but it went off again, I believed it just triggered my cars ignition, but my tires were low afterwards so it's okay 👍🏿
@@FranciscoEvuy you got the same lights and it went away on its own ?
Does anyone know what size screws he used to install the TOYOTA lettering
www.mcmaster.com/90434A132/
Why dont you guys install the letter :(
We wanted to lower the price of our grilles. We may offer it as an option but have to charge for the time it takes us to install them.
🤔
How much are these grills?
Starting at $170
How in all the 7 hells do you get the rubber grommet on. It’s twice the size of the hole
Did you get it figured out? I got it about halfway in lol