So much work, very precise. We want a small window removed and a large door added, plus a door and window bricked up. So it’s good to see it done here. 👌🏻
Great to see the finished product Stu , been a pleasure to watch the job bit by bit , KC sure is good with that brush , glad to see your feeding him with good old chippy dinner, great job , hope you get to use those nice reclaimed ones on another job , recycling at its best , proper bricks, proper tradesmen 🤗😉😎💪
Very Nice Work , Great Team Work - Oooohhhh to beee a Brickyyyyy Excellent Door , I do Understand the 5 Inch of Foam in the Roof & Laminated Wood on the Steel Beams to make a Strong Roof System . Being Older Builder I Personally Prefer Hipped Roofs - Not Flat Roofs - I would have done Two Layer's of Sky Lights with Boxed Walls Up through - Into the Hip Roof .. ( Just Me Thou ) I have a Thing about Water Control ..
Hi Stu - I don't know if you're able to read all your comments - really helpful video but I wondered what your opinion is on whether to bed a lintel on mortar or straight onto masonry? Seems like you laid it straight onto brick here, which I'd rather do. If anyone else could chime it would be very helpful
theyre not halfs phil they are just marks on the brick from when they were used for the arch over the door which i took out if that make sense, that reminds me i need to clean those marks off, cheers
Amazed, was looking for exactly this video to see a small window replaced with small doors ..... thanks 😊. How much would a job like that cost supply and fit etc . Estimate
Hi Stu I’m a plumber/tiler love your videos just wondering is there a certain point you put the strong boys?? I would like to remove a window and install doors but want the doors to be wider hence new lintel ect any advice would be great 👍 Thanks in advance Andrew
Great job as usual.. can you show more of what you do to tidy up the reveals and floor on the inside after a job like this too? would be interesting to see what you do. Regards
I'm having a window and a door taken out the back of my house to put a bifold door in. Good to see what work will be required. Can make sure builders know what they are doing when they quote and what they are quoting for. Can police them when they are doing the job too. Props need to stay up for at least 2days after steel box lintel goes in and bricked up above. Question. how do you measure for a door where a window has been. so there's no side bricking in etc. Sounds stupid, but wanted to ask an expert. Thanks
Would've been nice to see how you measured the cuts above the arch. You could've mentioned that the long cut on the left side needs to be spot on as it will be visible. I see you put a bit of trim on it to hide any imperfections in the original brickwork . 😁Again, a very nice job.!
mm PERFECT Nice job Stu.
What a great bond you and your father have.
I've watched many of your videos.
What an inspiration you are to others.
Keep it up.
🌟🌟🌟🌟🌟
Archie Oliver ohhh that’s his father I didn’t knoww
Who on earth gave this a thumbs down? Great looking job.
Danny Boy
Probably a traditional joiner!
David Lowe I'm a traditional joiner and I gave it a thumbs up, they made a nice job of it. 👍
@@garethheathcote4988 jealous people pal
Excellent job
So much work, very precise. We want a small window removed and a large door added, plus a door and window bricked up. So it’s good to see it done here. 👌🏻
Hey Stu. i have the same close bond with my dad. Cherish it while you can .
Great job, a pleasure to watch a couple of craftsmen at work 👍
Great job, especially on the brickwork on the arch. Level detail and care is through the roof!! 👍🏻
Top job stu 👍👍👍 I do like the brick arch above the door. Not an easy job them doors.
Cheers mate, turned out well 👍
Great to see the finished product Stu , been a pleasure to watch the job bit by bit , KC sure is good with that brush , glad to see your feeding him with good old chippy dinner, great job , hope you get to use those nice reclaimed ones on another job , recycling at its best , proper bricks, proper tradesmen 🤗😉😎💪
Cracking job as usual Stu. Your Dad narf brushes up well.
Awesome job guys stew your dad is so awesome
Love the arch. Nice to see you cut voussoirs. Proper job.
Bloody good job that . Nice to see proper craftsmen at work.
Skilled builders, beautiful buildings and a wonderful country... 👍
Best job i have watched on your channel so far. Bricking up the old door to putting in the new french doors. Top job 👍🏻
Lovely job.
Top job men. KC and SC quality as always. Excellent filming and editing SC. 👍🏻
Magnificent job! Beautiful work!
Excellent. Quality job stu
Neat sealing up you been icing a lot of cakes 👍
lol mark i have :)
Really like the production, content with the music. Fabulous job Stu. 🧱👍
Much appreciated mate
One of the most skilled trades, if not the most. You made it look sooo easy! 👍
A good trades man always makes a hard job look easy
Great job Stu
That is one or should I say two gorgeous doors....lovely job guys 👍👍
Superb. What a great job
My respects to you for your smooth, professional work and a charmful behavior and a personality.
Thanks for watching talha
Wow that is pretty brilliant job..well done Stu.. love your videos..you're a talented lad. Great stuff
I wish more tradesmen was as good and sound as you. Well done mate, job looks 👌🏽
Your videos are therapeutic Stu 💪🏻
Lurrrrvely job Stu,neat and tidy curveture on the Arch and doors look nice to.🔝job mate 😉👏👍
Seriously great job in my eyes that's your best one so far
Beautiful work stu
That a nice job stu and kc make it look so easy 👌
Cheers Malc mate
Nice Surgical Cuts on the Brick to get Started on Door also . .
Really good job
Another great job boys.
Great work KC and Stu true professionals you make a good team.
That’s so bloody neat. Great job.
what a cracking job!
Very Nice Work , Great Team Work - Oooohhhh to beee a Brickyyyyy
Excellent Door , I do Understand the 5 Inch of Foam in the Roof & Laminated Wood on the Steel Beams to make a Strong Roof System .
Being Older Builder I Personally Prefer Hipped Roofs - Not Flat Roofs - I would have done Two Layer's of Sky Lights with Boxed Walls Up through - Into the Hip Roof ..
( Just Me Thou ) I have a Thing about Water Control ..
Looks like it's grown there Stu , very tidy work as always.
Beautiful job. Enjoyed watching.
Hi Stu - I don't know if you're able to read all your comments - really helpful video but I wondered what your opinion is on whether to bed a lintel on mortar or straight onto masonry? Seems like you laid it straight onto brick here, which I'd rather do. If anyone else could chime it would be very helpful
Very nice job!
The best part is to do the brick job.
👍👌👊
That looks smart Stu, good job.
Top work as always mate really enjoy your videos
great job Stu ..
Yet again 10/10 great work lads
you are the best, amazing job💯✔✔✔✔✔✔✔✔👌👌👌👌
Sweet job
Great you make it look really easy
Cracking job again Stu, work to be proud of that.
Another great job Stu
Looks amazing mate...great job 👍
Proper Job! (In keeping with the original style of the property). Sweeeeeet!
Stonking job there Stu, you can barely tell old door was in the right hand wall?! 👍👍👍 Nice chips KC 😂😂😂
Super tidy bro 😎🔥
2.50 Do as you’re told, Stu! KC knows best. 🤣 Really nice job guys 👍🏻
Great job,Stu!👍
Diffentley quality work.
Proper job that stu! 👌
I'll Buy that Old Window Sill ~ Love that Arch ~
great job well done
Another top job Stu keep the videos coming
Looks superb great job, just one question, why the few half bricks on the arch? They didn’t seem like ones you pointed up new
theyre not halfs phil they are just marks on the brick from when they were used for the arch over the door which i took out if that make sense, that reminds me i need to clean those marks off, cheers
Cheers Stu, I looked back a few times and I couldn’t work it out!
An unusual job with the arch rebuilt with a great finish. How do you go about sizing up the lintel you used on this job Stu?
Lintel is span of the opening plus 300mm
Tastefully done... very professional.
Brilliant, but then I wouldn’t expect anything less from you two!
Nice one Stu & KC!! How come you don't use an SDS with chisel bit to remove brick & plaster? Would it not save time compared to hammer and bolster?
I'd use a hammer for delicate bits on the edges but agree sds bosch with a chisel bit is the way to go
New subscriber here Stu! Jobs 1st class mate 👍👍👍
Amazed, was looking for exactly this video to see a small window replaced with small doors ..... thanks 😊. How much would a job like that cost supply and fit etc . Estimate
Hello from Russia! Very good job
Hello Russian thanks for watching 😁
@@Stucrompton1 Саламчик с Кауказа Бро 🤘✊🏽🤝
top work there, looks brilliant!
You make it look soooo easy
Nice work dude!
brilliant job that stu lad👏
Lovely work. Are you going to build a stoop? How will you keep those vents below open?
Hi Stu I’m a plumber/tiler love your videos just wondering is there a certain point you put the strong boys?? I would like to remove a window and install doors but want the doors to be wider hence new lintel ect any advice would be great 👍
Thanks in advance Andrew
yes stu
Made it look so easy..................................................... grrrrrrrrr.......
Look like the one u done last week well done mate always smashing it 👍🏻
Got a trial apprenticeship next week for being a bricklayer, any tips on what to wear such as what t shirts or what to take ?
Hi Stu and KC, do you always remove brick by hand? Could you use a SDS with chisel? Hope you are both well during these crazy times.
Pure skill .........
another top job 👍
You never disappoint boyos cracking
Top job lads 👌looks banging
luv ur work mate, ur a gudden. so is KC.
Cheers Gary we try do our best mate. Thanks for stopping by. 👍
Great job as usual.. can you show more of what you do to tidy up the reveals and floor on the inside after a job like this too? would be interesting to see what you do. Regards
All the room inside is being plastered buddy so it was pointless us doing that but maybe we can show you again sometime
Bang on
Very Nice
Quality as usual mate 👍
I'm having a window and a door taken out the back of my house to put a bifold door in. Good to see what work will be required. Can make sure builders know what they are doing when they quote and what they are quoting for. Can police them when they are doing the job too. Props need to stay up for at least 2days after steel box lintel goes in and bricked up above.
Question. how do you measure for a door where a window has been. so there's no side bricking in etc. Sounds stupid, but wanted to ask an expert. Thanks
Would've been nice to see how you measured the cuts above the arch.
You could've mentioned that the long cut on the left side needs to be spot on as it will be visible. I see you put a bit of trim on it to hide any imperfections in the original brickwork . 😁Again, a very nice job.!
Looks great. Did all that trim and fascia come with the door?
Spectus doors 👌🏼
Your mix always 4 to 1? Even pointing? Even of pointing a customers eves?
not always it depends on the material you work with
I have a question. What if the inside floor slopes and also the brickwork slopes downhill?.