Nice tour of that system. I agree with getting things here and there if you have a modest budget. Had a few power outages last year and all I really powered was my laptop, a USB fan, and a couple fridges for a bit to make sure the ice parts stayed frozen. Didn't even come close to having to set up my solar panels.
Nice set up! I put together an inverter and 200 ah LiFePo4 system on a rolling cart 2 years ago to keep my refrigerator going in a power outage and it works GREAT! Next step is to add a charge controller and larger solar panel. My current panel is only 120 watts.
Very nice system. Love seeing what others are doing !! Great stuff they have. I have large panels like that. 10 on 1 system. 3.2KW . With that inverter able to hard wire that can be used with a transfer switch to breaker panel . Thank you for showing that system with us !
Hope you told ecommended for them to rotate that panel and out of the shade. 2000 inverter to power that pump is probably max it out. Need a 3500 or more probably.
I'm Building my 2nd small system Both 24 volt system #1 2 12 Volt 100 AH Lipo4 Li Time batteries and a Victron 24/1200 inverter System #2 2 24 volt 100 AH Lipo4 Li Time batteries and a 2000 watt Aims inverter/ charger.
@@ProjectsinParadise808 the system with the 2. 24 volt Li Time batteries is a copy of your first system with the 2 12 Volt Chins Batteries. I took Screenshots of your system
Thanks for the info ! Can a system like this be setup to automatically switch to solar from grid ? When the grid goes down automatically switch to solar/battery ?
Good day I have a 100a -100v mppt solar charge controller with a 12v 2000watt pure sine wave inverter can I connect a 405 watt solar panel to it to for a 12volts setup ?
I'm not bob, obviously.. but yes. If the voc on the panel is less than the controller.. you can. 100a and 100v...? Volts are probably right, but 100a ...?
@@OFFGRID_Trucker I'm good with the 24v setup because that setup up says 30-50v 2400 watts solar .. and for the 12v setup it's 15-25v 1200 watts of solar
@@OFFGRID_Trucker but where I am I can't get any 200 watts solar panels because that wouldn't pass the 25v for the 12v setup now I'm wondering if I could use 405watt panel with the 12v 100ah battery and the charger controller is mppt So I'm thinking that would regulate the voltage
@@kevongardner It will work. Only thing that matter is the VOC of the panel is lower than the MAX voltage of the controller. So it's plug and play for you.
Nice tour of that system. I agree with getting things here and there if you have a modest budget. Had a few power outages last year and all I really powered was my laptop, a USB fan, and a couple fridges for a bit to make sure the ice parts stayed frozen. Didn't even come close to having to set up my solar panels.
Thanks for taking us back to the basics, I had some things to correct after watching you!
Aloha!🤙
Cool. I told my brother about your channel, hope he chimes in. He's an electronics whiz on a short budget.
Hope to see him in the conversation sometime! Aloha!🤙
Good Morning ! Hope you had a nice 4 TH. TAKE CARE..
Aloha!🤙
Nice set up! I put together an inverter and 200 ah LiFePo4 system on a rolling cart 2 years ago to keep my refrigerator going in a power outage and it works GREAT! Next step is to add a charge controller and larger solar panel. My current panel is only 120 watts.
120w panel is a trickle charger. Go with a 400w or bigger and bifacial.
@@OFFGRID_Trucker I'm well aware of that.
Sweet!🤙
Very nice system. Love seeing what others are doing !! Great stuff they have. I have large panels like that. 10 on 1 system. 3.2KW . With that inverter able to hard wire that can be used with a transfer switch to breaker panel . Thank you for showing that system with us !
I love seeing everyone's stuff too! Kinda fun running around looking at how others are making it work! Mahalo brother! Aloha!🤙
Nice job.,,Have fun stay safe.
🤙
Ok thanks
🤙
Cool, thanks! ✌
ALoha!🤙
Hope you told
ecommended for them to rotate that panel and out of the shade. 2000 inverter to power that pump is probably max it out. Need a 3500 or more probably.
I did, and it was late in the day catching the shadow.😉🤙
The 200A breaker might wanna be 100A.
Might wanna put a 100A fuse straight off the battery.
Hey Bob love the video ❤
🤙
2000 watts is enough for the essentials especially when you live in Paradise.
🤙
cool stuff. love all your stuff. so fun! been busy w my remote systems. aloha
I'm Building my 2nd small system Both 24 volt system #1 2 12 Volt 100 AH Lipo4 Li Time batteries and a Victron 24/1200 inverter
System #2 2 24 volt 100 AH Lipo4 Li Time batteries and a 2000 watt Aims inverter/ charger.
Nice Choices on both Inverters
Nice!🤙
@@ProjectsinParadise808 the system with the 2. 24 volt Li Time batteries is a copy of your first system with the 2 12 Volt Chins Batteries. I took Screenshots of your system
I can’t get any 200 watt solar panels here because I know i could use two 200 watt panels but I’m thinking of a work around I’m in Jamaica
🤙
👍😊
🤙
hey bob
🤙
Thanks for the info ! Can a system like this be setup to automatically switch to solar from grid ? When the grid goes down automatically switch to solar/battery ?
Yes it can, and they plan on that. I'll try to get back and show that. Aloha!🤙
Good day I have a 100a -100v mppt solar charge controller with a 12v 2000watt pure sine wave inverter can I connect a 405 watt solar panel to it to for a 12volts setup ?
I'm not bob, obviously.. but yes. If the voc on the panel is less than the controller.. you can. 100a and 100v...? Volts are probably right, but 100a ...?
@@OFFGRID_Trucker yes the max spec on the charge controller is 100a 100v max 12/24/36/48
@@OFFGRID_Trucker I'm good with the 24v setup because that setup up says 30-50v 2400 watts solar .. and for the 12v setup it's 15-25v 1200 watts of solar
@@OFFGRID_Trucker but where I am I can't get any 200 watts solar panels because that wouldn't pass the 25v for the 12v setup now I'm wondering if I could use 405watt panel with the 12v 100ah battery and the charger controller is mppt So I'm thinking that would regulate the voltage
@@kevongardner It will work. Only thing that matter is the VOC of the panel is lower than the MAX voltage of the controller. So it's plug and play for you.
This person really tried to copy you as good as possible but he or she forgot to get a victron charge controller.
We all Noticed That Little Tid Bit 👌
🤙
👌
Nice selection of cannabis plants they are growing. Lol.