Wtf those old heads look pretty damn clean still just like the one I pulled off my 5.3 with 200,000 miles always babied haha, that’s crazy considering what y’all did to that truck. Good update
Looks at video of engine about to throw a rod one month, a few months later sees a video of same truck and engine being cammed and upgraded with headers.
That 4L60E is probably sweating bullets right now
Only people I know who would put heads and a cam in a motor with rod knock, but I totally approve 🤘🏻
DUDE YES✊ THE WORK RIG LIVES ON, that 5.3 is an absolute trooper, keep er goin bud🤘
FM4💪
HELL YEA, been here since the work rig was a actual work truck lol.
The ol Work Rig finally gettin BUILT hell yes #RevTap Industries
The work rig never dies! We just now need the turbo cavi. You boys got fans from here in San Antonio.
We cant let this channel die
HOT DAMN! You boys givin this ole work rig some love! We’ll maintain the vehicle!
Wtf those old heads look pretty damn clean still just like the one I pulled off my 5.3 with 200,000 miles always babied haha, that’s crazy considering what y’all did to that truck. Good update
Good ole work rig doin what needs to be done
I need a video now ASAP I need to laugh man you know pooooooh shiiestyyyy
"Jake, don't look at 'dem!" Hahahhahaha
The work rig is back 🤘
Dude I fucking love you guys this shit is hilarious every time
Well, all I know is the ol work rig seems to have caught fire at the end 🤣
Ohhh shit I just noticed that 💀💀
Now yo ass got me worried as fuck bout the work rig. Ill cry if this ole truck burns down
Been here since the turbo cavi let’s see a revival!
Exactly where is that car
@@Coronet_shop saw it in the background of the work rig revival
My dads '02 has a cracked head his oil gets all sludged up like that from the coolant leaking into it. Still sending it though 335k miles on it.
Its super common with these Castech heads. My dad's did the same thing, lost an engine over it. It was actually a recall
@@hunterjohnson4954 what models or years or production factory got theses heads?
Quality job from the good ol boys. I love this shit. Makes me want to beat the piss out of my silverado every time.
nothin like a lil ole country side ride in the work rig😂😂😂
Been here since the work rig got a muffler delete and before. Ole work rig has came a long way and is still banging the limiter
Video is 4:20, description is 69. Nice.
*"I'm cam swapping the world over here"* 🤣🤣🤣
Seen that rig in the burnout box at street car takeover yesterday 🤘🇺🇲
Fucking "don't really wanna give this thing hell." My ass. You said that in 2017. Now it's 2021 and she still taking it!!!
you guys are fuckin awesome. the work rig lives 🤣🤣
The finest channel on UA-cam.
The 5.3 in my 2003 Silverado has 283,000 miles on it.
When people say the 5.3 is junk they obviosly havent seen what the work rig has gone through
Or the 4l60e 🤔
Just fill that block full of pepto for that upset stomach lol
You guys are cutting edge
Rod knock or not she still running strong as she can be. I'm pretty sure that might be piston slap.
Lmao who drew a chevy badge on the piston 🤣🤣
That oil filter is the worst thing i’ve ever seen 😂😂😂👏🏻. I’ve seen a diesel oil filter at 26k miles. And it looked new compared to that lmao
Holy shit you do that voice perfectly
Always run to a rev tap video
Boys I got myself a couple of 5.3 sierras '04 & '08 Z71s damn things get down to business 🥃🏁
I almost puked when I saw the oil filter
Pooohhh sheisty coming out that oil filter
Holy shit how does the block and pistons still
Look that decent after all the abuse that is insane and cam doesn’t even look that bad
Best channel on UA-cam
You boys done did it , ol work rig is a legand
Like! Before I even watch 😂 always great content keep it coming y’all
"well maintained vehicle" 1:11
Fresh valve seals and good seats wear out piston rings faster...just springs and a cam keep her sane
The Work Rig is back!!!!!
Sheeshhh Back and better 🔥
Rod knock shmod knock.
Cam swap the world!
gotta love that summit cam
Looks at video of engine about to throw a rod one month, a few months later sees a video of same truck and engine being cammed and upgraded with headers.
Put flowmaster super 10 on the rocker dump
Swap it with a lower geared rear end so it dose crazyer burn outs
Don't you have to tune it so it shifts at the right time?
WORK RIG
Can we get a story on the work rig
looking forward 🦾
Just release like 20 minute videos I’d watch every second! Maybe live streams?
She’s looking and sounding nasty hahahahaha yes
Sound like exhaust
It’s finally happening!!! 😂
oh what in the fuck boys! HAHAHA
Damn it yall gotta post more
Turn on closed captions and be prepared to laugh your balls off
YYYYYEEEESSS MAN !!!
The third cam is out of the work rig
Yeah it's the one on the right side.
Dam howd u know
Thats a bad unit right there
Check flex plate some times the bolts come loos or the flex plate cracks an it sounds like a rod nock
Loyal rig
Y’all gotta have a subscriber meet
keep up the great vids
This truck was in a ditch a few years ago 😭❤️
Where y'all from 🤣 y'all talk about like I do
How much y’all think you spent on all upgrades? I’ve got a 2000 5.7L I want to get some power to. Love y’all!
Probably around $800
Appreciate it! Gonna get my ol truck rippin like y’all.
nice
*cries in 4l60e*
Hell yeah boys!!...woohoo!!!
Did y'all tune it afterwards? And how? Ever send in a pcm to have it tuned?
Stock no tune
Cam swap the worldddd
Work rig does not give af.
This is amazing
Fire shot mod next!
Fuckin send er bud🤘🤘
Not a single dislike
Whoever dislikes drives a squatted mini van
Keep it up boys
Yaaa boyyyy!
Hell yeah!!
does it has still the 4l60 ?
Yes original one
@@revtapindustriesllc 😯
Oh HELLLLL yea boyz
YEE YEE
hell ya
#Cam swap the world
Howd the knock go away
It was a top end knock it sounded like most likely from the blown head gasket
Dang what r dis giys really brothers or cousin
Yes
Yeeeeeeeeaaaahhhhhhhh
yessir
YESSSIRRRRR
😆
Man yall trying to hard to sound country be yourself maybe the channel will have better luck