PAY IT FORWARD . . . Please help me keep all my resources FREE for everyone to learn from and use. DONATE any amount here www.paypal.com/donate/?hosted...
My husband had this problem today and thanks to your video, he fixed the problem by following every step. He was quoted $ 600-800 by the dealership and he spent $12 for that pink plastic part. My hats off to you Sir! God bless you!
Thanks you sir! you just saved me well over 250 bucks. for those of you that have a Chrysler 300, you have to remove 3 screws inside the bottom of the armrest compartment, slide it back, ( it doesn't have to come completely off) and lift up on it while you maneuver the shift control out. the replacement part will run you bought 10 to 12 bucks at the dealership.
Your video was the easiest and fastest, thank you! My cousin told me to have it towed to a shop that would charge me $200 just to look at it. A friend said he would do it but he was trying to find the time because he watched a video that required the entire console to be removed. With your video and the grace of GOD I did it myself. I struggled a bit because I didn't have the right tools but I have the right tools now. As a woman I really appreciate easy to follow car repair videos like yours. Thanks again for your awesomeness! 😍
Ya hear people say enough "words cannot express" how happy, how grateful, how pleased I am..Well if ya stop and think about that phrase, words are simply not powerful enough to emit your emotion to others...that's what it means..so words can't explain how much this vid saved my ass today...thank you so much.
This is the BEST video on this topic. The dealer insisted I needed a whole new shifter and wanted to charge over 400$ but I watched this video and was able to fix it by getting that little part for about 12 bucks on Amazon. The only difference is I have a Chrysler 300 and in the bottom of the arm rest there are three bolts that need to be unscrewed because it wont allow for the shifter to come out without lifting the arm rest a little. Thanks for this video.
I hope my comment arrives and you are in good health. God bless you! Thanks to your tutorial I was able to tow my boat again and take my wife on vacation. I was desperate. The lever was no longer moving and I was about to call the tow truck. Then, through an Italian forum, I came to your video. You are an angel, you saved my holidays. I hope all is well for you and your family !!! Grazie grazie grazie !!!
For over 10 years and your video it is still helping people. Very well done and easy to follow. I was in a restaurant at 11:00 pm when my car experienced this problem. Thanks to your video I was able to unlock the shifter in a few minutes and drive my car home. I repaired myself the next day again using your video. Thank you very much.
Thank you so freakin much! I was stuck 60 miles from home and I live in a foreign country. Your video allowed me to get home and get my car to a mechanic the next day!
Thanks for this video I a half ass backyard mechanic was able to do this job. Your way was the easiest of all I reasearched and no doubt you saved me alot of money. The Dodge dealership in St Louis Park sold me that part for $10 and thats all this repair cost me. Thank you
Thank you so much! It was a bit trickier getting the shifter out of a Chrysler 300, but all your steps were so clear and easy to follow. Part kit was $8.10 from Chrysler, who would have wanted $250 to do the work. Thanks again!!!
This was exactly what I needed. This was the exact problem I had and I really appreciated the step-by-step guidance and well-shot video. I had a little difficulty getting the rear end of the shifter out but a little joggling and flexing of the center console side panels did the trick. In my case I bought the replacement part from my local dealership for about $13.50 after tax. Great Job and thanks for posting.
Don’t know how to thank you you’re a life saver, I have a Dodge Charger and my develop the same problem watched your video and was able to repair it myself.
A big THANK YOU coming from NorCal - while my unit did not come out (or back in) as easy in my '07 R/T as yours did in the video, I got the job done and it saved me gawd knows how many 100's of $.
This is the simplest, fastest, and best explained video by far regarding this issue. We got it right away, followed each step slowly and fully paying attention. Little replacement was $15 at the dealership, and a little pick and hook set that we didn't have for $7. Thank you sooooooo much for taking the time to make this video the way you did!
I experience the same problem with my Dodge Magnum RT, several mechanics were saying that it could be my brakes, timing and other issues. none of them had no idea. When i came across this video it was a cash $$$ saving and easy to follow video to get the job done. Thank you.
hey you guys rock after me and my wife saw your video on how to fix ,we did our 300 that got stuck on park we thank you so much you help us to save money THANK YOU...
What a chore this was today in my Charger R/T. My console that the shifter housing actually sets in isn't quite as open as the model in your vid so it was a JOB getting it in and out without taking apart the whole console. But, None-the-less, your video saved me BIG TIME! For that my man, cheers to you, sir.
Thanks so much, I was able to follow this to repair my 2006 300 Touring Sedan!. One problem was getting the shift assembly out due to my model having a spring loaded cover for the double drink holder. I was able to maneuver it out only after removing the 3 screws inside the center console that hold it down, then raising the back end of the console to create a bit more space. I greatly appreciate this video tutorial. It is the best of many that I reviewed before starting.
My hat is off to you also!. I was stuck in the driveway blocking my other vehicle in the garage. My son and granddaughter are coming in on a plane and this car has to move. Thank you for your steady approach to the problem. I couldn't go to get a part so I made a patch using 4 rounds of small braided stainless steel wire. The wire is nylon coated, so I expect it to last much longer than the pink plastic. Did you see that one guy had found one made of billet aluminum... that's the permanent answer. Thanks again for saving the day!
I swear your FREAKIN awesome my boyfriend was able to fix my 05 magnum thanks to watching your video! I had watched a number of videos before I ran across yours and by far this was the easiest. Thank you :]
A man willing to watch the video with his woman and do the work to save money to spend somewhere else is a keeper and a blessing! I hope y'all are happily married together and continuing to work together! God Bless!
I love those swivel head snap on ratchets. They were one of the first tools I bought. Most auto repair is all about the attitude....you go at a vehicle with a positive attitude, you will be just fine. I'm slowly see more and more of these newer Chrysler vehicles come into my uncles shop, so i'll keep this repair in the back of my mind. Great video
The best self fixit I have seen. Had no idea my shifter was such a piece of plastic junk until now. Chrysler should fix this for free but I know I’m dreaming.
I appreciate your straight-forward direction on this fix. Other videos made it seem a bit more difficult, but following your method I was done in roughly a half hour. Thanks for this video.
Awesome do-it-yourself video!!! My wife's car broke at 5:30am as she tried to go to work. I got it moving using a screwdriver to push back on the front pink part that has the spring. The spring appears to be missing. Until I have time to fix it next week, she can use the screwdriver to unlock the shifter. Thank you for taking the time to film and post this video. GREAT JOB!!!
I learned the hard way to take the ashtray seat warmer out. It simply pops out and there are three plugs on the back. It gives you a whole lot more room so you don't struggle too much. I am thankful to guys like this who make these videos which help save people tons of money and also give them hope that it isn't as bad as they might think.
Thank you for this extremely helpful video. My 07 Charger R/T experienced this problem about 2 weeks ago. Dodge quoted me 400+ to have it fixed. I find your video, paid Doge 12.00 for the interlock replacement kit and the whole process of removing the old and installing the new took me about 1 hour. MUCH APPRECIATED. You saved me money!
I was able to follow the video and fix this issue myself. You did a great job of explaining step by step in detail. This was by far one of the better mechanical fix videos I have seen on You Tube. It always helps when someone else is holding the phone/video camera.Thanks again for your help.
This video was right on for the same issue I was having with my Chrysler 300, the gear shift was stuck in park. You even show the part number I needed to call Chrysler. I watched the video and had my husband pick up the part after work. He was able to take everything out watching your step by step video. I'm in business now all thanks to you, and it only cost $10.
I have a 2008 Chrysler Pacifica but it's all basically the same. What I like about your video is you replace the part without taking the gear shifter knob off. I tried to unscrew mine to the left but it wouldn't budge and I was afraid I'd break it. With your method, you don't have to take it off. I bought the metal replacement piece instead of the plastic one and reused the old spring. Thanks for taking the time to post this video to UA-cam.
Your instructions were on point. Im so happy i came across your video instead of paying a shop to do it. Only real problem i had was getting the shifter out of the space. I have an 06 charger and struggled for a while until i decided to take the console loose. It did the trick. Thanks !!
Thanks for making this video. Got in my car and the shifter wouldn't budge, I immediately went on UA-cam, I KNEW someone would have a video, to get me on my way Thanks again
The best instructional video I've ever seen and saved me $$$ I would have had to pay the dealer to do it. Recommend taking that darn ashtray out if you ever do a new video, but this works too. ;)
Great directions, I wasn't able to buy the part but had to buy the whole shifter. Was going to cost 650 for the dealership to do it plus around 100 for towing it. Paid 200 for shifter and replaced it myself! Happened in the morning and fixed it the same day! Thanks!
Thank you for your detailed explanation for fixing this shifter. At first I had my doubts about being able to do it but your video was so clear and thorough that it gave me the confidence to try. I’m glad I did. Problem solved!
Thanks so much! I was worried about a huge repair bill. I got the latch in 2 days from Amazon, and the fix went just as you described.I really appreciate you posting this!
Thank you, RealFixes. With the help of your video, we were able to determine what was causing the shifter to lock up (Chr 300) as well as replace it ourselves.
your video saved my wife today, she called frantic while she was out of town and her charger wouldnt shift out of park, your video let me talk her through it and get the car back home where i could work on it, thanks again !!
thank you,thank you,thank you!!!when I saw your video I was amazes at how simple this is. I had an appointment with the dealership to do this,it is going to be canceled! as im getting older I have to pick and choose what repairs to tackle. this video was such a tremendous help,cant thank you enough! part comming from amazon tomorrow,Charger should be back on the road good as new.
I personally want to thank you for this video. Because of you I save some money and I was able to fix my car my self. GREAT GREAT VIDEO EVERYTHING WAS PERFECT THAT YOU SAID AND DID IN THE VIDEO. ONCE AGAIN I THANK YOU FOR THE VIDEO AND GREAT VIDEO
Best video I've seen on the topic and I searched through quite a few until I found this one. Had no tools available but using this video I just made a makeshift screwdriver to get at the lever so I could disengage the lock manually. Super clear instructions and it got me back on the road home so I could actually make the repair. Much appreciated!! I'm a subscriber now and I'll let the ads run!
I just want to say thank you!! I was able to fix my Charger following your video. You kept it simple and it didn’t take me long at all. Not to mention I saved some cash!! Thanks once again!!!
I just wanted to thank you for posting this video. I did the replacement myself. The whole process took me about a hour and part to replace costs like 14 bucks.
Thank you so much. After watching this video i went to dealer to see how much they would charge. The part was about $25 bucks but they wanted to charge me $240 bucks just to change it. I only bought the part, watched your video again, and performed the maintenance myself. Thank you for this video
My husbands car had this problem when he attempted to leave for work Friday. I posted on a local facebook page asking for recommendation for towing and mechanic. Someone asked what the problem was and year/make of car. (2006 magnum). He shared this video with me. So thankful to see this. Now to get the part and get it fixed - and not have to pay for towing and labor :)
thank you. this is a excellent video. I only spent $12 dollars for the part at dealership. you save me a lot of money. I would recommend this video to everyone who had the same problem. it now works fine. thank you again.
Oh my GOSH! You are awesome! My son and I followed your video and fixed this in our Chrysler 300. The part cost $15 and saved me over $200 in mechanic cost. Thank you so much.
This video was a great help. I just changed the latch on my 300c here in the UK, replacing the pink plastic one for a metal one. I did it before it went bad; it would only happen at a really inconvenient time otherwise. As mentioned in other comments, I had to remove the three bolts under the arm rest and lift it to enable removal of the unit. Also I was advised to put a bit of lithium grease on the shaft before putting the metal one on. Many thanks.
Had to do this today. Your video was by far the best at showing the steps and explaining things. I also removed the ash tray assembly as it simple pulls away from the dash and gave me a bit more room to work. I also ordered Dorman part # 924 706 as it is made of aluminium . Thanks again!
Thanks for a GREAT video. I broke down at my son's school. I had only a leatherman and a windows phone on me. I got it open and got it into drive and drove it home. Called the dealer to get the part. At first they had NO idea what part I needed. "The pink part on the bottom of the gear shifter..." I saw your part # and they had it for $8.43. Once again, can't thank you enough!
Thank you! This happened for the first time tonight as we're trying to get home after a long Christmas with family, and we just wanted to get home. This helped tremendously!
Thanks for the great video. Just fixed my 2006 magnum. The Dodge dealership was going to make me by a whole new shifter $350-400. I found the metal replacement at the auto parts store and fixed it myself.
I suck at anything mechanical & after watching you do the fix i decided to try it! My 300 was stuck in park in my driveway. I went to the dealership & picked up the part ($14.00) & went home with my cellphone in hand & fixed my 300. Thank you for making & sharing this video.
This video saved me tons of cash! Thank you! The only difficulty I had was pulling the shifting mechanism out of the car and putting it back in place once I had the part replaced... But it finally went thank you again
Thank you so much, for your help and hard work‼️ This was the BEST DIY video on the shifter interlock latch assembly PERIOD. You made EVERYTHING look so easy and the video and documentation was spot on for the entire process... If I may humbly suggest one small thing that I felt was possibly insignificant, but may help someone else in the replacement process, and that would be to remove the ashtray. It kept popping out lol. I honestly thought you were going to suggest it, but then realized you were trying to do all of this with the least amount of steps possible. For that Sir, you must be congratulated, Thank you sincerely for this video and saving my family and I, a possibility of an expensive repair, or possibly being taken advantage of for a much more expensive repair that was not needed... I’ve been ROASTED many times in the past for simple repairs as this, and living on a fixed income makes it hard for automobile repairs period. Some people can be less than honest about such things, but because of your help and diagnosis, I can now sleep tonite! Kindest and best regards, Michael
I own a Chrysler 300. This video is really great. It took me about 45 minutes to replace the pink lever. The new lever is white cost $7 at dealer. I did have to loosen the box directly behind the shift which has screws to remove the gear shift.
Thank you so much for this video! I saved myself hundreds of dollars by doing this myself. I found that I had to remove the bolts in the arm rest in order to get the shifter out of its space. I also ordered a metal unit to replace the broken pink unit.
Thank you so much for a great step-by-step. I was able to replace the "pink thingy" on my 2006 Chrysler Pacifica with a metal one I bought on Amazon for less than $20. I am NO WAY a car person, but I am fairly handy with a screw driver, and your video was the easiest to understand and follow. I did need to find another video to help me remove the Pacifica console to get to the root of the problem, but I credit your video with saving me LOTS of time and money.
Thanks for the vid!! Used your instructions fto dissemble console and shifter, but I used a small self tapping screw with the old assembly and re-attached the spring. Worked like a charm and saved a little $. THanks!!
Thanx a million man! Your video saved me a very expensive visit to the dealer! I got the old plastic piece out and instead of buying a new one I modified the old one by drilling a hole through it where the hook broke off. Then I looped a solid piece of copper wire thru the hole, hooked the spring to it and it fixed that.
This way very simple. I replaced the plastic interlock for less than $30 on Amazon. I did get frustrated trying to put the shifter back in. I gave up and tried it the next day. I watched another video that showed some extra steps and was able to get it in easily. It was only 5 more screws to remove the console. Slipped right in. Thanks for this video.
Very helpful & informative. Changed out the Shifter Interlock Lever today on my 2007 Charger. One modification added .10 wire to spring and wrapped in around lever to reinforce spring and lessen the tension on the plastic spring hook. Also removal of console was necessary to pull shifter; 3 bolts & 2 screws. One quick remedy to shift out park is to pull chrome trim piece, locate cable for the brake lockout, depress brake pedal, push cable to the left with a screwdriver pull shifter into gear.
big up yo. took me a lot longer than you. but I bought the aluminum replacement parts...and it didn't fit. so I screwed the spring on. works so far. you rock!!!
Thank you I was able to repair my 07 Chrysler 300 It was the holiday weekend so all dealerships were closed so I couldn't get the white upgraded part so I went to u-pullit and found the upgraded part in a old Chrysler gear shift took it apart instead of just changing out the whole gear shift due to it had cosmetic issues installed in my original gear shift and it works perfectly I can express enough my gratitude
I know this video is many years old, but still very valid and current. I wanted to thank you for taking the time to film and explain this process, it saved me nearly $900 (Cad.). I worked like a charm for my '07 Charger SRT8. Again, thank you for this.
My husband had this problem today and thanks to your video, he fixed the problem by following every step. He was quoted $ 600-800 by the dealership and he spent $12 for that pink plastic part. My hats off to you Sir! God bless you!
Bless you for not making another "your bushing needs replacing" video and actually getting into how it works
Thanks you sir! you just saved me well over 250 bucks. for those of you that have a Chrysler 300, you have to remove 3 screws inside the bottom of the armrest compartment, slide it back, ( it doesn't have to come completely off) and lift up on it while you maneuver the shift control out. the replacement part will run you bought 10 to 12 bucks at the dealership.
Thanks for this info, had trouble pulling the shifter out (very tight) and I was worried about replacing it, this should help a lot.
Your video was the easiest and fastest, thank you! My cousin told me to have it towed to a shop that would charge me $200 just to look at it. A friend said he would do it but he was trying to find the time because he watched a video that required the entire console to be removed. With your video and the grace of GOD I did it myself. I struggled a bit because I didn't have the right tools but I have the right tools now. As a woman I really appreciate easy to follow car repair videos like yours. Thanks again for your awesomeness! 😍
Ya hear people say enough "words cannot express" how happy, how grateful, how pleased I am..Well if ya stop and think about that phrase, words are simply not powerful enough to emit your emotion to others...that's what it means..so words can't explain how much this vid saved my ass today...thank you so much.
This is the BEST video on this topic. The dealer insisted I needed a whole new shifter and wanted to charge over 400$ but I watched this video and was able to fix it by getting that little part for about 12 bucks on Amazon. The only difference is I have a Chrysler 300 and in the bottom of the arm rest there are three bolts that need to be unscrewed because it wont allow for the shifter to come out without lifting the arm rest a little. Thanks for this video.
I hope my comment arrives and you are in good health. God bless you! Thanks to your tutorial I was able to tow my boat again and take my wife on vacation. I was desperate. The lever was no longer moving and I was about to call the tow truck. Then, through an Italian forum, I came to your video. You are an angel, you saved my holidays. I hope all is well for you and your family !!!
Grazie grazie grazie !!!
Glad to hear it helped you. Thanks for letting me know. And by the way, I am doing much better.
For over 10 years and your video it is still helping people. Very well done and easy to follow. I was in a restaurant at 11:00 pm when my car experienced this problem. Thanks to your video I was able to unlock the shifter in a few minutes and drive my car home. I repaired myself the next day again using your video. Thank you very much.
Glad it helped, thanks for commenting
Thank you so freakin much! I was stuck 60 miles from home and I live in a foreign country. Your video allowed me to get home and get my car to a mechanic the next day!
Glad it helped, thanks for letting me know
Thanks for this video I a half ass backyard mechanic was able to do this job. Your way was the easiest of all I reasearched and no doubt you saved me alot of money. The Dodge dealership in St Louis Park sold me that part for $10 and thats all this repair cost me. Thank you
Thank you so much! It was a bit trickier getting the shifter out of a Chrysler 300, but all your steps were so clear and easy to follow. Part kit was $8.10 from Chrysler, who would have wanted $250 to do the work. Thanks again!!!
This was exactly what I needed. This was the exact problem I had and I really appreciated the step-by-step guidance and well-shot video. I had a little difficulty getting the rear end of the shifter out but a little joggling and flexing of the center console side panels did the trick. In my case I bought the replacement part from my local dealership for about $13.50 after tax. Great Job and thanks for posting.
Don’t know how to thank you you’re a life saver, I have a Dodge Charger and my develop the same problem watched your video and was able to repair it myself.
Glad it helped
A big THANK YOU coming from NorCal - while my unit did not come out (or back in) as easy in my '07 R/T as yours did in the video, I got the job done and it saved me gawd knows how many 100's of $.
This is the simplest, fastest, and best explained video by far regarding this issue. We got it right away, followed each step slowly and fully paying attention. Little replacement was $15 at the dealership, and a little pick and hook set that we didn't have for $7. Thank you sooooooo much for taking the time to make this video the way you did!
Thanks for the Strait Talk without any FLUFF or Unnecessary words. Refreshing.
I experience the same problem with my Dodge Magnum RT, several mechanics were saying that it could be my brakes, timing and other issues. none of them had no idea. When i came across this video it was a cash $$$ saving and easy to follow video to get the job done. Thank you.
Your welcome, glad it helped, and thanks for letting me know
hey you guys rock after me and my wife saw your video on how to fix ,we did our 300 that got stuck on park we thank you so much you help us to save money THANK YOU...
The only way this video could have been more helpful was if he came and fixed my car. Thanks so much for doing this !!! Great job.
What a chore this was today in my Charger R/T. My console that the shifter housing actually sets in isn't quite as open as the model in your vid so it was a JOB getting it in and out without taking apart the whole console. But, None-the-less, your video saved me BIG TIME! For that my man, cheers to you, sir.
Thanks so much, I was able to follow this to repair my 2006 300 Touring Sedan!. One problem was getting the shift assembly out due to my model having a spring loaded cover for the double drink holder. I was able to maneuver it out only after removing the 3 screws inside the center console that hold it down, then raising the back end of the console to create a bit more space. I greatly appreciate this video tutorial. It is the best of many that I reviewed before starting.
My hat is off to you also!. I was stuck in the driveway blocking my other vehicle in the garage. My son and granddaughter are coming in on a plane and this car has to move. Thank you for your steady approach to the problem. I couldn't go to get a part so I made a patch using 4 rounds of small braided stainless steel wire. The wire is nylon coated, so I expect it to last much longer than the pink plastic. Did you see that one guy had found one made of billet aluminum... that's the permanent answer. Thanks again for saving the day!
I swear your FREAKIN awesome my boyfriend was able to fix my 05 magnum thanks to watching your video! I had watched a number of videos before I ran across yours and by far this was the easiest. Thank you :]
A man willing to watch the video with his woman and do the work to save money to spend somewhere else is a keeper and a blessing! I hope y'all are happily married together and continuing to work together! God Bless!
I love those swivel head snap on ratchets. They were one of the first tools I bought. Most auto repair is all about the attitude....you go at a vehicle with a positive attitude, you will be just fine. I'm slowly see more and more of these newer Chrysler vehicles come into my uncles shop, so i'll keep this repair in the back of my mind.
Great video
The best self fixit I have seen.
Had no idea my shifter was such a piece of plastic junk until now. Chrysler should fix this for free but I know I’m dreaming.
Actually, I've read there is a secret warranty on these.
I appreciate your straight-forward direction on this fix. Other videos made it seem a bit more difficult, but following your method I was done in roughly a half hour. Thanks for this video.
Couldn't have asked for a better step by step video. I'm so happy I found this. You saved me a ton of frustration! Thank you!
Awesome do-it-yourself video!!!
My wife's car broke at 5:30am as she tried to go to work. I got it moving using a screwdriver to push back on the front pink part that has the spring. The spring appears to be missing. Until I have time to fix it next week, she can use the screwdriver to unlock the shifter. Thank you for taking the time to film and post this video. GREAT JOB!!!
I learned the hard way to take the ashtray seat warmer out. It simply pops out and there are three plugs on the back. It gives you a whole lot more room so you don't struggle too much.
I am thankful to guys like this who make these videos which help save people tons of money and also give them hope that it isn't as bad as they might think.
What’s the name of that piece
Thank you for this extremely helpful video. My 07 Charger R/T experienced this problem about 2 weeks ago. Dodge quoted me 400+ to have it fixed. I find your video, paid Doge 12.00 for the interlock replacement kit and the whole process of removing the old and installing the new took me about 1 hour. MUCH APPRECIATED. You saved me money!
Excellent instructional video. So glad you took the time to post it. Thank you for getting me back on the road!
I really appreciate it. I did the repair in no time thanks to you. No money for the dealer today !!!!!
I was able to follow the video and fix this issue myself. You did a great job of explaining step by step in detail. This was by far one of the better mechanical fix videos I have seen on You Tube. It always helps when someone else is holding the phone/video camera.Thanks again for your help.
This video was right on for the same issue I was having with my Chrysler 300, the gear shift was stuck in park. You even show the part number I needed to call Chrysler. I watched the video and had my husband pick up the part after work. He was able to take everything out watching your step by step video. I'm in business now all thanks to you, and it only cost $10.
I don't normally do my own work (time, experience,etc...), but this video was my Bible. thank you so much!
I have a 2008 Chrysler Pacifica but it's all basically the same. What I like about your video is you replace the part without taking the gear shifter knob off. I tried to unscrew mine to the left but it wouldn't budge and I was afraid I'd break it. With your method, you don't have to take it off. I bought the metal replacement piece instead of the plastic one and reused the old spring. Thanks for taking the time to post this video to UA-cam.
Your instructions were on point. Im so happy i came across your video instead of paying a shop to do it. Only real problem i had was getting the shifter out of the space. I have an 06 charger and struggled for a while until i decided to take the console loose. It did the trick. Thanks !!
your welcome, glad it helped, thanks for commenting
Thank you! Your well made video turned a potential cluster of a repair into an easy one!
...information never goes stale...9 years later...and still...helped me out tremendously...thanks.
Thanks a million! Well, actually, thanks 400 bucks, but you get the idea. You produced a very lucid and helpful video. Much appreciated.
Thanks for making this video. Got in my car and the shifter wouldn't budge, I immediately went on UA-cam,
I KNEW someone would have a video, to get me on my way
Thanks again
My vehicle is a 2005 Chrysler 300C. With your video, I was able to successfully make the repair to the shifter in about an hour. Thanks!
The best instructional video I've ever seen and saved me $$$ I would have had to pay the dealer to do it. Recommend taking that darn ashtray out if you ever do a new video, but this works too. ;)
Great directions, I wasn't able to buy the part but had to buy the whole shifter. Was going to cost 650 for the dealership to do it plus around 100 for towing it. Paid 200 for shifter and replaced it myself! Happened in the morning and fixed it the same day! Thanks!
Thank you for your detailed explanation for fixing this shifter. At first I had my doubts about being able to do it but your video was so clear and thorough that it gave me the confidence to try. I’m glad I did. Problem solved!
Thanks so much! I was worried about a huge repair bill. I got the latch in 2 days from Amazon, and the fix went just as you described.I really appreciate you posting this!
Daniel Fahlgren what was the name of the part to order
Thank you, RealFixes. With the help of your video, we were able to determine what was causing the shifter to lock up (Chr 300) as well as replace it ourselves.
your video saved my wife today, she called frantic while she was out of town and her charger wouldnt shift out of park, your video let me talk her through it and get the car back home where i could work on it, thanks again !!
thank you,thank you,thank you!!!when I saw your video I was amazes at how simple this is. I had an appointment with the dealership to do this,it is going to be canceled! as im getting older I have to pick and choose what repairs to tackle. this video was such a tremendous help,cant thank you enough! part comming from amazon tomorrow,Charger should be back on the road good as new.
Awesome and very thorough, so easy to follow each step!! I was able to fix my 2005 Chrysler 300 in an hour! THANK YOU!!!!
I personally want to thank you for this video. Because of you I save some money and I was able to fix my car my self. GREAT GREAT VIDEO EVERYTHING WAS PERFECT THAT YOU SAID AND DID IN THE VIDEO. ONCE AGAIN I THANK YOU FOR THE VIDEO AND GREAT VIDEO
Best video I've seen on the topic and I searched through quite a few until I found this one. Had no tools available but using this video I just made a makeshift screwdriver to get at the lever so I could disengage the lock manually. Super clear instructions and it got me back on the road home so I could actually make the repair.
Much appreciated!! I'm a subscriber now and I'll let the ads run!
This video was so clear and helpful. It fixed our issue!! Thank you for posting!!
This job is a testament to your patience, Duane. The customer is very fortunate to have steady hands like yours on the car!! Well done!!
I just want to say thank you!! I was able to fix my Charger following your video. You kept it simple and it didn’t take me long at all. Not to mention I saved some cash!! Thanks once again!!!
Thank you saved me from not being able to go to work!
I just wanted to thank you for posting this video. I did the replacement myself. The whole process took me about a hour and part to replace costs like 14 bucks.
Thank you so much. After watching this video i went to dealer to see how much they would charge. The part was about $25 bucks but they wanted to charge me $240 bucks just to change it. I only bought the part, watched your video again, and performed the maintenance myself.
Thank you for this video
My husbands car had this problem when he attempted to leave for work Friday. I posted on a local facebook page asking for recommendation for towing and mechanic. Someone asked what the problem was and year/make of car. (2006 magnum). He shared this video with me. So thankful to see this. Now to get the part and get it fixed - and not have to pay for towing and labor :)
thank you. this is a excellent video. I only spent $12 dollars for the part at dealership. you save me a lot of money. I would recommend this video to everyone who had the same problem. it now works fine. thank you again.
Oh my GOSH! You are awesome! My son and I followed your video and fixed this in our Chrysler 300. The part cost $15 and saved me over $200 in mechanic cost. Thank you so much.
You're welcome, thanks for commenting
Thanks for the video, I fixed my car using this video and I've never fixed anything on a car. Saved me hundreds of bucks.
Great video, I wish everyone was as thorough as you
This video was a great help. I just changed the latch on my 300c here in the UK, replacing the pink plastic one for a metal one. I did it before it went bad; it would only happen at a really inconvenient time otherwise. As mentioned in other comments, I had to remove the three bolts under the arm rest and lift it to enable removal of the unit. Also I was advised to put a bit of lithium grease on the shaft before putting the metal one on. Many thanks.
Had to do this today. Your video was by far the best at showing the steps and explaining things. I also removed the ash tray assembly as it simple pulls away from the dash and gave me a bit more room to work. I also ordered Dorman part # 924 706 as it is made of aluminium . Thanks again!
Thanks for a GREAT video. I broke down at my son's school. I had only a leatherman and a windows phone on me. I got it open and got it into drive and drove it home. Called the dealer to get the part. At first they had NO idea what part I needed. "The pink part on the bottom of the gear shifter..." I saw your part # and they had it for $8.43. Once again, can't thank you enough!
Thank you! This happened for the first time tonight as we're trying to get home after a long Christmas with family, and we just wanted to get home. This helped tremendously!
I was about to call a tow truck for my Chrysler Pacifica. Mine looks a little different but your video helped me tremendously! Thanks much!!!
Thank you so much for this video! I was able to fix my car in just a couple of hours and and I'm sure saved myself a ton of money!!!
This video just helped me out of being stranded, thank god for this and you now I just need to get it really fixed
Thanks for the great video. Just fixed my 2006 magnum. The Dodge dealership was going to make me by a whole new shifter $350-400. I found the metal replacement at the auto parts store and fixed it myself.
Man great video love the details, just followed u step by step n got my 06 charger fixed in no time. Thanks
Thank you. You saved the day though I was going to have to get my car towed because I couldn't get it out of park.
Did you go get the new part from the dealership? And if so did they have it in stock or did you have to order it
I suck at anything mechanical & after watching you do the fix i decided to try it! My 300 was stuck in park in my driveway. I went to the dealership & picked up the part ($14.00) & went home with my cellphone in hand & fixed my 300. Thank you for making & sharing this video.
Tony, I'm glad it helped and thanks for letting me know.
wow extremely well illustrated, no missing steps.... thank you so much for sharing your knowledge.
This video saved me tons of cash! Thank you! The only difficulty I had was pulling the shifting mechanism out of the car and putting it back in place once I had the part replaced... But it finally went thank you again
Excellent video. Very informative. Great step by step. No excess talking about things that are not prudent to what you’re trying to show!
I was able to get my mother in law back on the road with this video! Thank you!
AMAZING that people take this amount of time with detailed instructions to help others. Thank YOU ~
Yes he's good.
Got part at amazon. Fixed Chrysler 300. Had to move console back to get shifter out, but worked beautifully thanks to the video!!!
Thank you so much, for your help and hard work‼️
This was the BEST DIY video on the shifter interlock latch assembly PERIOD.
You made EVERYTHING look so easy and the video and documentation was spot on for the entire process...
If I may humbly suggest one small thing that I felt was possibly insignificant, but may help someone else in the replacement process, and that would be to remove the ashtray. It kept popping out lol. I honestly thought you were going to suggest it, but then realized you were trying to do all of this with the least amount of steps possible. For that Sir, you must be congratulated,
Thank you sincerely for this video and saving my family and I, a possibility of an expensive repair, or possibly being taken advantage of for a much more expensive repair that was not needed... I’ve been ROASTED many times in the past for simple repairs as this, and living on a fixed income makes it hard for automobile repairs period. Some people can be less than honest about such things, but because of your help and diagnosis, I can now sleep tonite!
Kindest and best regards,
Michael
Thank You I appreciate your comments. You have brightened my day
I own a Chrysler 300. This video is really great. It took me about 45 minutes to replace the pink lever. The new lever is white cost $7 at dealer. I did have to loosen the box directly behind the shift which has screws to remove the gear shift.
Thank you very much. I'm a tow truck driver, you really saved my Buns today.
Glad it helped, thanks for your comments.
What a great guy! And a great video!
Thanks for the heads up!
You do a GREAT JOB. Lighting and dialog. Thanks....and my grandson will thank you.
Awesome!!! Just fixed my 2006 300C. Part cost $8.91 at Dodge dealer. Followed video and everything went fine. Great Job!!!!
Thank you so much for this video! I saved myself hundreds of dollars by doing this myself. I found that I had to remove the bolts in the arm rest in order to get the shifter out of its space. I also ordered a metal unit to replace the broken pink unit.
Thank you so much for a great step-by-step. I was able to replace the "pink thingy" on my 2006 Chrysler Pacifica with a metal one I bought on Amazon for less than $20. I am NO WAY a car person, but I am fairly handy with a screw driver, and your video was the easiest to understand and follow. I did need to find another video to help me remove the Pacifica console to get to the root of the problem, but I credit your video with saving me LOTS of time and money.
This video saved me time and money (i.e. before I took a road trip). I did not have to take it to the dealer. Thanks!
Just wanna say thnx. Did the fix today worked out great because of the video. Saved a ton of cash. I did it on a chrysler 300 2006. Thnx again
Thanks for the vid!! Used your instructions fto dissemble console and shifter, but I used a small self tapping screw with the old assembly and re-attached the spring. Worked like a charm and saved a little $. THanks!!
Thank you!! Just got done with fixing my charger, the video had great instruction step by step details, same me soooo much money!!!!!
Thanx a million man! Your video saved me a very expensive visit to the dealer! I got the old plastic piece out and instead of buying a new one I modified the old one by drilling a hole through it where the hook broke off. Then I looped a solid piece of copper wire thru the hole, hooked the spring to it and it fixed that.
great work
This way very simple. I replaced the plastic interlock for less than $30 on Amazon. I did get frustrated trying to put the shifter back in. I gave up and tried it the next day. I watched another video that showed some extra steps and was able to get it in easily. It was only 5 more screws to remove the console. Slipped right in. Thanks for this video.
Very helpful & informative. Changed out the Shifter Interlock Lever today on my 2007 Charger. One modification added .10 wire to spring and wrapped in around lever to reinforce spring and lessen the tension on the plastic spring hook. Also removal of console was necessary to pull shifter; 3 bolts & 2 screws. One quick remedy to shift out park is to pull chrome trim piece, locate cable for the brake lockout, depress brake pedal, push cable to the left with a screwdriver pull shifter into gear.
big up yo. took me a lot longer than you. but I bought the aluminum replacement parts...and it didn't fit. so I screwed the spring on. works so far. you rock!!!
Thank you I was able to repair my 07 Chrysler 300 It was the holiday weekend so all dealerships were closed so I couldn't get the white upgraded part so I went to u-pullit and found the upgraded part in a old Chrysler gear shift took it apart instead of just changing out the whole gear shift due to it had cosmetic issues installed in my original gear shift and it works perfectly I can express enough my gratitude
Glad to hear it worked for you
I know this video is many years old, but still very valid and current. I wanted to thank you for taking the time to film and explain this process, it saved me nearly $900 (Cad.). I worked like a charm for my '07 Charger SRT8. Again, thank you for this.
Glad it helped, thanks for your comments.
Thank you. This is exactly what happened to my wife's magnum. I was able to fix it with your video.
Outstanding video and great patience! I appreciate the post. Going to try this next week!