Great video my friend….could you please tell me how to make these patterns in photoshop or any other software….so that I can do a preview of the motion before chopping the wood…
Hello, I used a cobalt steel tap, used the proper sized drill bit, also cobalt steel, used lube and went slow, constantly backing out then going forward a little deeper, you might try heating the Sos tube a little if it is giving you a lot of trouble. Hope this helps. Ken
Hi Kenneth - nice job - I bought his plans, cut out the patterns on CNC and bought all the hardware except I can't seem to fine the spring. Did you get the spring from McMaster Carr too? Can you provide me with the stock number for the spring?
I just finished building my Cepheid Sculpture on OneFinity CNC and it looks great. However, I noticed a couple of things I would change in future build. The 1/4” and 3/8” brass spacers between spinners seem flimsy, the SS shaft is too hard to sand down to fit into bearings, and there should be a brass spacer on spring shaft. I’m looking at something beefier to replace brass spacers. Also, I would also use larger bearings to fit precisely on a larger shaft or long bolt so no sanding-I would adjust wood hole size accordingly. Your thoughts?
Hello, the distance and location are not given as measurements, they are marked out on the patterns for drilling. The patterns are available from Derek Huggers website.
@@riviageraltof6 5mm х5 mm a very large system is obtained?! I made a sickle-shaped one with a thickness of 5mm x 3 mm and with this size the magnets behave inadequately. I would like your mail!
congratulations friend, i'm from Brazil i'm starting to work with a router you could leave the files and share your ideas with more people has helped a lot thanks.
Hello, I use the shield at ren fairs when I wear armor, the Latin phrase is an inside joke for people that know the movie Soylent green, the complete Latin phrase reads Soylent green is people. The knight on the shield I made is to represent a fictional knighthood that I made up. The knights of saint Heston.
I’m a metal sculpture artist and looking to expand into kinetic sculptures I love the sculpture. Thanks for posting. Larry
Thanks, I am fond of Derek Huggers work and also Clayton Boyer. Ken.
Outstanding!!!
Bob
Thank you for the positive comment,Ken
Hello, thanks for sharing; i have problem funding all the physical parts (springs...) can you please specify where can i fund it.?
Great video my friend….could you please tell me how to make these patterns in photoshop or any other software….so that I can do a preview of the motion before chopping the wood…
Hi, good job, congratulations. Could you tell me where I can buy the spring and how I order it?
Did you have any problem tapping the SS tube - I've broken a couple of taps including a cobalt steel one
Hello, I used a cobalt steel tap, used the proper sized drill bit, also cobalt steel, used lube and went slow, constantly backing out then going forward a little deeper, you might try heating the Sos tube a little if it is giving you a lot of trouble. Hope this helps. Ken
Very nice...
Thank you for the kind comment. Ken
Hi Kenneth - nice job - I bought his plans, cut out the patterns on CNC and bought all the hardware except I can't seem to fine the spring. Did you get the spring from McMaster Carr too? Can you provide me with the stock number for the spring?
He doesn't want to share anything, just brag a little.
Hello sir, can you help me how to make one like it if you allow me Is there a map of the parts and how to install and work and thank you
I just finished building my Cepheid Sculpture on OneFinity CNC and it looks great. However, I noticed a couple of things I would change in future build. The 1/4” and 3/8” brass spacers between spinners seem flimsy, the SS shaft is too hard to sand down to fit into bearings, and there should be a brass spacer on spring shaft. I’m looking at something beefier to replace brass spacers. Also, I would also use larger bearings to fit precisely on a larger shaft or long bolt so no sanding-I would adjust wood hole size accordingly. Your thoughts?
Larger bearings consume spring energy and will affect operational performance .
very nice. Im retired and would like to try making this very interesting piece. can anyone send me precise measurements
where can I get the spring
Nice work, nice video. (Not sure why it is so fuzzy, maybe a dirty lens?)
Hello, sorry about the image at times, I am still learning to video. Ken.
where do you get the spring ?
🔥🔥🔥
Thank you for the comment. Ken
Superb sir
Thank you so much. Ken
Where are the plans??😊
Hi sir
Can u please tell me the thicknesses of the wood
Bonjour à vous avez vous des plans à vendre svp
From Where I will get the magnet
Sir, i want constant force spring
I use blue tape then spray adhesive. Comes right off.
I too have used that method, but I find direct attachment of the plans easier on large pieces. Ken.
I can't find the distance and position for the magnets!((( Please tell me
Hello, the distance and location are not given as measurements, they are marked out on the patterns for drilling. The patterns are available from Derek Huggers website.
@@kennethpaulwoodworking6404 для меня дороговато за чертеж , придётся самому подбирать! или как вариант на маятнике сделать. какой диаметр магнита?
@@ruskul23 先把月牙扣做出来，然后买一些小尺寸的磁铁，3-5MM都可以，不一定按照视频中的方法，你只需要保证月牙扣指向棘轮。我使用5mm X 5mm的磁铁。距离需要自己测试，我希望翻译能够准确。希望能帮助你
@@riviageraltof6 5mm х5 mm a very large system is obtained?! I made a sickle-shaped one with a thickness of 5mm x 3 mm and with this size the magnets behave inadequately. I would like your mail!
Where I can get this sculpture please inform to me sir I love this sculpture please inform to me I want to buy this ❤️❤️❤️
Hello, I don’t know anyone that sells a completed sculpture, but you can obtain the plans to build one from Derek Huggers website.
@@kennethpaulwoodworking6404 how to making u sir please video please ❤️
Brilliant. Your an interesting man Kenneth Paul. Where do you come up with these ideas? Excellent workmanship. Above and beyond
Thank you. Ken.
Hello.
nice job sir.
can you tell me the dimensions of these magnets?
thanks
Hello, the magnets are available from McMaster-Carr , the magnets are 1/8” and 1/4”. Ken.
@@kennethpaulwoodworking6404 tanks sir. The spring?
How much run times?
Hello, run time is about 1 1/2 hours.
@@kennethpaulwoodworking6404 i want to make this, please guide me ken
Do you sell your work? If so, do you ship outside US?
Hello, I am not currently taking orders for new work, if that changes, I will notify you. Ken
congratulations friend, i'm from Brazil i'm starting to work with a router you could leave the files and share your ideas with more people has helped a lot thanks.
Como posso fazer seu curso???
привет поделитесь пожалуйста макетами чертежами этих механизмов
Nice work keep it up. Try to use tripod.
Thank you, I am working on improving my video skills, and will try to use a tripod more so that I can demonstrate better. Ken
Halo my frind I wand this one can u sent
this doesn't help at all, where are the plans?!
The plans are available from Derek hugger on his website.
Why do you have a Latin Soylent green inscription over top of the Lithuanian coat of arms? 🤣🤣🤣🤣
Hello, I use the shield at ren fairs when I wear armor, the Latin phrase is an inside joke for people that know the movie Soylent green, the complete Latin phrase reads Soylent green is people. The knight on the shield I made is to represent a fictional knighthood that I made up. The knights of saint Heston.