I think if they did youtube full time they would lose the lightness and freeness to their videos. This still feels like a small channel because they care about their content quality and audience, not paying the bills (and whether raid shadow legends or some other bs company is going to pay them or not). Keep it up, you guys are awesome!
Seriously one of my favorite channels to watch. Its an awesome change of pace from all the full time youtube celebrities cramming crappy products and brand deals down your throat all the time. Much love and respect to you both :)
I love that you guys stay in touch and have not just gone silent completely. Really hope to see more frequent stuff of course… but god bless and nice to hear from ya. You have always seemed like great people.
Love the banter between you two! Thanks for the video Jennie & Jake ! One suggestion: lose the guilt and apologies about your infrequent video posting. You don't owe (most of) your audience any-dang-thing. I'm just happy to have what you feel like posting. Have a Very Happy New Year EVERYONE !
Hell yeah! So cool to see a road legal kx100! Its going to be such a conversation starter! Nice work on that electrical system.. That bike really wasn't designed for what you have achieved. Well done sir 👏
Those rear turn signal brackets might need additional support other than just 1 bolt holding them on, as she drives around with it those will rattle around until plastics tear up and they come loose. Doing additional support for those upper brackets under rear fender will help a ton as it's more solid, idk what's the best way to connect them. Awesome video, hopefully we get full year of quality content :P
Metal fatique might kick in after while on those bends if not reinforced at the end. Just bend peace from one side to another under the fender using bolts visible under there and connect to ones made with welding for clean results and with poprivets if just ok or alternatively just make new bracket using top mounting points to hold it in place. Then again excessive reinforcement might cause cracking of the fearing if...when she fells with it. Maybe instead of aluminum use plastic peace separate of the fearing to reinforce it so that can give in. Some use rubber mounts to limit vibrations for the blinkers to save them any vibration related damage but its not perfect solution.
@@Hellsong89 I'm more concerded for plastic fatique, aluminium most likely outlasts plastic for years even with those bends, after all those were made right from the start. Rubber for blinkers would be good on back side as most blinkers have it already on another side from the factory, even on cheap ones. Tube going to blinker housing is rubber almost always, not counting any wish/aliexpress nonsense
I’m not sure what you think you’re seeing, but where those things are attached, is literally where the plastic fender attaches to the frame, so the bolt which is holding those things on is supported by the frame of the motorcycle. There is no “plastic fatigue” involved here.
I agree with this comment, and would like to add that the rear blinker is tapping on the exhaust which creates a lot of excess noise. Great video though! Loved watching the whole series!
Man you guys are so naturally funny Please put out more videos You guys have EVERYTHING It takes to do this it works Because it’s all real and your just being your selves
Guys, after such a crap Christmas, you two have put the biggest smile on my face in a long time. Love your connection, your humour, its infectious. Loving the work on the kwaka. Can't wait for it to get plated 😎
Hey you guys. Keep this going and don't stop. You both are like a breath of fresh air to watch. I'm in the UK and love your videos. Top marks on the brackets and camera girl has a laugh that I'm sure makes everybody smile. 👍👍👍👍👍👍👍
Good to see you man. I don't know if it's weird that I think about you from time to time, I like rebuilding stuff nearly as much as I like watching you spend money to rebuild stuff. Makes me happy.
Been watching your videos since you fixed an ATC with a light switch spring. You look like you’re doing a lot better with your mental health man. Keep at it.
I’m so glad I found your channel again. I had lost track of it a few years ago when you had just finished getting you Trail 90 running. I love watching your videos and you genuine attitude! Actually your relationship together remind me of me and my wife’s! I just watched the video where you wound up giving those young guys the Honda 125 3 wheeler that was the donor motor for your Honda Trail 90. I hope they got back to you and sent pictures of what they built out of it. I hope you show them, if they actually followed through. That was a really nice thing you did. I also watched your recent video about trying to manage working and moving. I live in SoCal ☹️ and have been trying to move out of here for a long time and its difficult and stressful managing everything at once so I understand. Good luck and I hope you get it worked out! On another note, I’m a fan of smaller bikes. I’ve been looking for a Yamaha TW200 for years here. Used ones are non existent here and the dealers (FBC) here are all adding $1000 gouging fees to a $4800 bike which is obscene. You had mentioned selling bikes occasionally. I don’t know what part of the country your in but I would be interested in a TW if you find or fix one and wanted to sell it. If it made sense with cost and travel or shipping of course. Just thought I would throw that out there. I’d bet between your mechanical ability and your videos that everybody seems to really enjoy, you could have a a nice career just doing that! Would love to hear back if you have time and I’m looking forward to your next video!
Glad you like the channel! The 3 wheeler I gave away was a different one that I got for free when purchasing another bike: ua-cam.com/video/ZhBvJjKi_CM/v-deo.html Good luck with your housing situation. I hope you can find a place that is right for you.
Always get a bit of a warm glow when there's a jg video. It's like having that friend that works away and comes home for the holidays. I am interested what you've been up to? What about another ride along ? 👍
Good work on the wire harness. Using a 2 output stator for my CR250 I ran just the headlight with regulator direct allowed running a H4 55/100w. Powered the brake/tail/turns with small isolated RC car battery in fender tool bag.
37:30 Oh thank goodness, I having a conniption over the untested brake light! 🤓 Happy New Year, Jake, Jennie and “Junior”! Glad to see you guys survived the “Bomb-Cyclone” and the “Mecha-Atmospheric-River”!
@@jenniesgarage lots of rain makes for good dirt longer into the riding season.i am frustrated with no riding now but will be worth it if the rain lets up.or i am selling bikes and building an ark haha
Another fantastic educational and entertaining video - thank you! Just wish you had drilled through the front of the rear fender (under the seat) rather than the sides for the rear turn signal wires - that way none of the wire would have been externally exposed. Love your content all the same.
Favorite channel. I don't really do projects, but your videos inspire me to add lights to my dirtbike cus I only do trails. My favorite part of this video was when u guys said "ok left turn signal" "that's the right" "ok, well we have a bug to work out" 😂. I wanna love the process of failing over and over till u get it right just like u guys. Thanks (:
Great to see you two back with another video! It was so close to a perfect video. What do you ask could make it better? Answer : some world class crimping!!!!
The best UA-cam personality EVER. I could watch you guys all day long. Please do UA-cam full time
You are very kind. Thank you.
My thoughts exactly!
I think if they did youtube full time they would lose the lightness and freeness to their videos. This still feels like a small channel because they care about their content quality and audience, not paying the bills (and whether raid shadow legends or some other bs company is going to pay them or not). Keep it up, you guys are awesome!
@@projectdirtbikes I disagree.
Seriously one of my favorite channels to watch. Its an awesome change of pace from all the full time youtube celebrities cramming crappy products and brand deals down your throat all the time. Much love and respect to you both :)
agreed!
Crimpin' ain't easy.
I love that you guys stay in touch and have not just gone silent completely. Really hope to see more frequent stuff of course… but god bless and nice to hear from ya. You have always seemed like great people.
I’ll watch this later as I’m in the hospital visiting my Nana but it’s nice to have this to look forward when I get home later 🙂 thank you
Hope you like the video, and best wishes to your Nana.
Love the banter between you two! Thanks for the video Jennie & Jake ! One suggestion: lose the guilt and apologies about your infrequent video posting. You don't owe (most of) your audience any-dang-thing. I'm just happy to have what you feel like posting. Have a Very Happy New Year EVERYONE !
One of the channels that gets an instant like even before watching the video
I wasn't expecting a new video, but you two just made my day!
It's good to see you guys again, I hope you are having a great start to the year.
Nice job, this is getting exciting now.
Oh shit I've been waiting to see this switch flipped for months
I love your video's so much, so happy when a new one pops up! Keep up the great work!
Great to have another upload!!
I love these two. Cutest married couple on UA-cam.
Nice video! It doesn't matter if its a bike video or not!
Just upload anything! You guys are really entertaining!!!
Thank you!
It’s always a great pleasure and surprise when you guys drop a video!
Yay a Jennie’s garage video! I’ve been watching you guys since I was like 14, I’m 19 now and love watching you guys wrench.
Hell yeah! So cool to see a road legal kx100! Its going to be such a conversation starter!
Nice work on that electrical system..
That bike really wasn't designed for what you have achieved. Well done sir 👏
Welcome back, one of the legends of UA-cam
Heck ya! Another jennies garage video! I miss this channel, it always makes me happy to get a notification
Glad you enjoyed it! Thanks.
That was a fantastic lesson in annealing. Much more satisfying to prove it was necessary then see the improvement.
FMF stands for "Flying Machine Factory", love this instalment, keep them coming.
Those rear turn signal brackets might need additional support other than just 1 bolt holding them on, as she drives around with it those will rattle around until plastics tear up and they come loose. Doing additional support for those upper brackets under rear fender will help a ton as it's more solid, idk what's the best way to connect them. Awesome video, hopefully we get full year of quality content :P
Metal fatique might kick in after while on those bends if not reinforced at the end. Just bend peace from one side to another under the fender using bolts visible under there and connect to ones made with welding for clean results and with poprivets if just ok or alternatively just make new bracket using top mounting points to hold it in place. Then again excessive reinforcement might cause cracking of the fearing if...when she fells with it. Maybe instead of aluminum use plastic peace separate of the fearing to reinforce it so that can give in. Some use rubber mounts to limit vibrations for the blinkers to save them any vibration related damage but its not perfect solution.
@@Hellsong89 I'm more concerded for plastic fatique, aluminium most likely outlasts plastic for years even with those bends, after all those were made right from the start. Rubber for blinkers would be good on back side as most blinkers have it already on another side from the factory, even on cheap ones. Tube going to blinker housing is rubber almost always, not counting any wish/aliexpress nonsense
I’m not sure what you think you’re seeing, but where those things are attached, is literally where the plastic fender attaches to the frame, so the bolt which is holding those things on is supported by the frame of the motorcycle.
There is no “plastic fatigue” involved here.
Yeah I was thinking the same thing, especially with it being a 2 stroke.
I agree with this comment, and would like to add that the rear blinker is tapping on the exhaust which creates a lot of excess noise. Great video though! Loved watching the whole series!
Jennie's garage is my all-time favorite
I love this channel, such great wholesome content. The world needs a little more JG. Thank you for creating more content.
Horn works: pure joy on your face!
Your vids are awesome, the post production is improved. Nice work! Thank's
You guys mesh so well together, always look forward to the next installment/adventure/project.
I’ve gotten out of dirt bike unfortunately but your videos always bring me joy and make me remember the good ole days. Thank you
Man you guys are so naturally funny
Please put out more videos
You guys have EVERYTHING
It takes to do this it works
Because it’s all real and your just being your selves
Guys, after such a crap Christmas, you two have put the biggest smile on my face in a long time. Love your connection, your humour, its infectious. Loving the work on the kwaka. Can't wait for it to get plated 😎
Hey you guys. Keep this going and don't stop. You both are like a breath of fresh air to watch. I'm in the UK and love your videos. Top marks on the brackets and camera girl has a laugh that I'm sure makes everybody smile. 👍👍👍👍👍👍👍
Wonderful to see you guys again!!! Love the videos
Year 3 of the kx100 street legal conversion has been the best one yet!
A explaination of your housing moves would be interesting if it's not too personal. Glad to see you back at the videos!
Glad to see you back!
No other campers around to be bothered by 2 stroke noise and smell I guess
Knowing your t-shirt conditions...I was seriously surprised by those perfectly white socks. I noticed👍
Great to see you back again! You do great work, I wish I had your patience.
Glad to see yall back I used to enjoy your pick up a busted piece of whatever and fix it vids. Happy 2023 yall
you both are so funny.. miss you guys we gotta stop being busy and get together-Alice
Good to see you man. I don't know if it's weird that I think about you from time to time, I like rebuilding stuff nearly as much as I like watching you spend money to rebuild stuff. Makes me happy.
That tidbit at 17:03 is illegally funny. Love seeing you guys' stuff, missed this one in the subscription feed but back at it after the latest upload!
Gotta say very nice job all around, design, fabrication and installation, and who could forget the wonderful camera work
Thank you!
The back and forth between this guy and camera girl is so cute. Goals.
Been watching your videos since you fixed an ATC with a light switch spring. You look like you’re doing a lot better with your mental health man. Keep at it.
I felt joy like it was my own project. Great job! 👍
@jenniesgarage , a similar-named account doing sketchy stuff under your vids
Fantastic. Let's hope the next video comes soon. The banter, the jokes and even the 'T' shirts are priceless. Great performance and we love it.
Simon
You’re still my top channel to watch. Love your videos and always waiting for more. Keep it up.
I’m so glad I found your channel again. I had lost track of it a few years ago when you had just finished getting you Trail 90 running. I love watching your videos and you genuine attitude! Actually your relationship together remind me of me and my wife’s!
I just watched the video where you wound up giving those young guys the Honda 125 3 wheeler that was the donor motor for your Honda Trail 90. I hope they got back to you and sent pictures of what they built out of it. I hope you show them, if they actually followed through. That was a really nice thing you did.
I also watched your recent video about trying to manage working and moving. I live in SoCal ☹️ and have been trying to move out of here for a long time and its difficult and stressful managing everything at once so I understand. Good luck and I hope you get it worked out!
On another note, I’m a fan of smaller bikes. I’ve been looking for a Yamaha TW200 for years here. Used ones are non existent here and the dealers (FBC) here are all adding $1000 gouging fees to a $4800 bike which is obscene.
You had mentioned selling bikes occasionally. I don’t know what part of the country your in but I would be interested in a TW if you find or fix one and wanted to sell it.
If it made sense with cost and travel or shipping of course. Just thought I would throw that out there. I’d bet between your mechanical ability and your videos that everybody seems to really enjoy, you could have a a nice career just doing that!
Would love to hear back if you have time and I’m looking forward to your next video!
Glad you like the channel! The 3 wheeler I gave away was a different one that I got for free when purchasing another bike: ua-cam.com/video/ZhBvJjKi_CM/v-deo.html Good luck with your housing situation. I hope you can find a place that is right for you.
So much new content. I love it. Been amazed by this channel since you fixed the Honda generator. Keep on!
Oh my days, where have you been
I have missed you so much
Long time no see, we miss you two..
Thank you for brightening my day. I always look forward to seeing the next video. You two are amazing!
Love you people. You are always making me smile.
Always feels like time well spent watching your vids...will always love them
Glad you like them!
Such a great team! Love the snark. Congrats on getting Jennies kx100 completed!
Been watching since the pw50 build, nothing beats a new upload from you guys
Thank you!
Man I haven’t watched y’all’s channel in at least 2 or 3 years I’m very excited to watch this!
Really awesome to see you are uploading again!
Always a good day when a video comes out
so glad there's a new video up!
So glad to see you guys back!
Such a nice surprise, i hope to see camera girl riding around in a few months again. Cheers!
Great to see you both back 👍🏻 Remember to program the speedometer for your wheel circumference....
That was 31 seconds shy of 40 minutes? Wow I love this channel 👍🏼
I’m really excited to see this finished, been watching since the start of this.... I’m sure camera girl is excited too!...
Nice work you two! Good to see you both, as always. Hope you had a great Christmas and New Years. Look forward to the next installment!
Always get a bit of a warm glow when there's a jg video. It's like having that friend that works away and comes home for the holidays.
I am interested what you've been up to? What about another ride along ? 👍
You guys are awesome, hope all is well!
Good work on the wire harness. Using a 2 output stator for my CR250 I ran just the headlight with regulator direct allowed running a H4 55/100w. Powered the brake/tail/turns with small isolated RC car battery in fender tool bag.
37:30 Oh thank goodness, I having a conniption over the untested brake light! 🤓
Happy New Year, Jake, Jennie and “Junior”! Glad to see you guys survived the “Bomb-Cyclone” and the “Mecha-Atmospheric-River”!
Yes we are fine! No flooding here. I'm tired of all this rain though.
@@jenniesgarage Agreed. We’re gettin’ washed-away here down south. Haven’t been on any of my bikes in a week. ☹️
@@jenniesgarage lots of rain makes for good dirt longer into the riding season.i am frustrated with no riding now but will be worth it if the rain lets up.or i am selling bikes and building an ark haha
Can’t believe the first video I watched of yours was 5 years ago 😮
Good to see a video from you guys today. I hope you all are doing well.
Looks like NC if I was gonna guess. Glad to see you back and posting again.
Hi love it when you guys post a new video, great to see you both and hope everything is good in your world, love from Wales UK xx
Another fantastic educational and entertaining video - thank you! Just wish you had drilled through the front of the rear fender (under the seat) rather than the sides for the rear turn signal wires - that way none of the wire would have been externally exposed. Love your content all the same.
Favorite channel. I don't really do projects, but your videos inspire me to add lights to my dirtbike cus I only do trails. My favorite part of this video was when u guys said "ok left turn signal" "that's the right" "ok, well we have a bug to work out" 😂. I wanna love the process of failing over and over till u get it right just like u guys. Thanks (:
My Birthday has been made with a Jennies garage upload 🙏🏻❤️
Great job with the editing! Hoping to see videos more often!
Love y'all's videos you won't believe the excitement I got when I saw you uploaded
Soo glad to see you guys back much love from the uk
you guys are awesome to watch, chill relaxed and easy to tune into. :0
Awsome job you 2 !! Don't forget to calibrate the speedo for the wheel size! I run the same thing in my xr650l, but it has a tach and temp on it also.
Man I was watching a few of your videos earlier today hoping you'd upload. My wish has come true.
So glad to see another video came out, I truly look forward to watching these videos! Keep up the good work!
Only channel on UA-cam that I click like before I even watch it.
Been watching this since the beginning iv been watching since the wr250 build and 426 build from years ago
Good to see you posting.
man i cant believe your still around. Ive been a subscriber since before the TE250 and honda cub days.
Great to see you two back with another video! It was so close to a perfect video. What do you ask could make it better? Answer : some world class crimping!!!!
Love the videos. I'm glad to see a few new ones recently.
Love the build series!, Can't wait for more
love seeing you guys upload. happy new year
Camera girls a hell of a lot smarter than you look. Its good to see you back. 😁
Always love seeing a notification that you 2 have posted a new video. Hope all is well in life. Hope the misses is taking it easy on ya these days. 🤣
I've been watching since the CT 90 would like to see more "farm projects "
Glad your back !!! Again… too bad that last place is apparently gone it had a great garage area.
It did have a very good garage, but other that that it wasn't a good fit for us. Glad you like the videos.
Bike is looking great and loved the edit on this 👍
Nice clean build.
Thank you.
I always get verry exited when i see a new video! I enjoy and learn allot from you guys stay safe and make more video's🏍️
Happy new year guys 🎉🎉 good to see you 🫶
Happy new year!
Ok, I got curious as well... it IS Flying Machine Factory. It's the name of Don Elmer's old shop. "Uncle Donnie's Flying Machine Factory" 👍
WELCOME BACK GUYS!! Ive been watching your vids from the start 😁👍🏼... love it!! Keep it up!! Love from Scotland 🏴