I saved up for a brand new YZ250 in 2000. Turned it into a Jeff Emig #11 replica with GFX kit, fmf expansion pipe and exhaust, gold excel rims and a year later it was stolen. Silently cut my garage door off in the dead of night to get to it and my German Shepherd that usually barks at a mosquito flying past the house never left REM sleep. It wasn't until 2011 until I could get another bike. I had a car stolen, a car stereo stolen out of said car too. Even had a GF stolen off me. Nothing hurt like that YZ not being there in the morning. If I saw someone stealing a dirtbike, or knew of someone that stole one...all bets would be off. Nice work on the bike. Very satisfying to watch.
Stumbled across your channel a few months ago while looking for inspiration for some of my own builds. Your content is just getting better and better, getting me motivated to get working on some of my winter projects! Keep up the great work!
Hey everyone! Funny story this is actually my bike and before you give me shit for the piston I had way too much to drink when I did the top end lmao. I just wanted to comment and mention I had a guy contact me and then sit outfront of my shop saying the yz 80 was stolen and I waited hours for him to leave and or cops to show up. Anyways long story short he did file a stolen reports exept he had written the vin down incorrectly by 1 number and ended up not being able to do anything about it. Anyways had a good experience with Kincade other than I freaked out when I found out it was stolen and he either didn't see or ignored my text either way doesn't matter all is well thay ends well.
❤❤ жж дд до дждддддддддддддддддддддддддддддддддддддждддддддддддддддддддддд б джддддддддддддддддддддддддддддддддддд да джддддддддддддддддддддддддддддддддддддджддддддддддддддддддддддддддд до д до джддддддд жддддддддддд до дж ддддддддд дюж до джддддддддддддддддддджд до д д дж д дд ж д д джддддддддддддд д ддддддддддддд дд дддддддддддддддд д джддддддддддддддддд дд дждддддддддддддддд ждддддддд до додж дд дд дд дд д д д6😊😊😊😅
Next time you should add up the price of everything you got for free just to see the real world profit that someone who doesn’t have access to sponsors and stuff could make on a flip like this. Bike turned out awesome btw🔥
Thanks Bobby! In the cost breakdown on screen at 8:40, I did include the total cost without sponsors - $1,672.09. And some of those things, while awesome to have, weren't necessary to still have a successful flip. Such as graphics
@@KincadePavich oh I must’ve missed that, thank you! I’m in the process of flipping a mint 2008 klx110, the bike market in my area has definitely slowed down alot tho
I live in the Bozeman area, idk how I’ve watched UA-camrs for these past years and never found your channel… anyways, love your videos man. You got me motivated to break down my bike and put new parts into it!
Go hiking in Los Angeles canyons. My favorite is lake elizabeth rd/cyn. northeast castaic lake. Found 9--11 porsche, bmw 320, ford p.u And numerous two wheel stuff.
Nice build. When blowing out pipes go to 90 PSI and use two bottles of Map Gas at the same time. One bottle of Map Gas is not enough heat for the deep dents. This will take out dents on cross seams.
Nice work. My elder brother was a nasty piece of work. He really was and still is. I was rebuilding my Honda MT 125 and fitting a CR barrel and piston to it. He was watching me. As I was fitting the piston to the conrod, my mother called out saying there was someone on the phone for me. I answered the phone call and went back to working on the bike. It ran really well and I had fun for a week before the flywheel actually came off due to the end of the crankshaft cracking open. I took the engine to a shop to have a new crankshaft fitted and on collection, they told me that the piston had been fitted the wrong way around. My ratfink brother had done that while I was on the phone. But there wasn't a mark on the barrel or piston. His ploy didn't work but your vid reminded me of it. BTW, I beat the snot out him for that.....
It' s amazing how well organized is some things in the US (not to say everything!).The part that police officer investigate a dirt bike to tell you that is not stollen blow my mind.And as the dirt bike perts for restoration you are at another level! Very good video.Greetings from Greece!
Nice work, but the clutch cable And Tracker, are they at least one of them (tracker) not Necessary to replace? 05:48, it still good condition, Just need some cleaning and painting. New one also good looking.
Excellent video and editing. You do a lot of work to spruce up those bikes, and the video and audio probably doubles the time it takes to complete. Great work sir!
My 73cc cylinder has also two nasty scores under the transfer ports because both piston clips fell out, i think they were old ones because i installed them correctly. still works after honing and still has pretty good power but i believe that it will seize soon
I had this this exact issue with the clutch. Super common on these rms. Replaced that single part and its like new. Love the builds my bro keep up the great work 🤙
when i was assembling my 70cc kit on my moped i had it all ready to run but luckily a person on snapchat saw my story and pointed out that the piston was on backwards.
@@KincadePavich when we built my 88cc big bore, we installed everything correctly and it ran like a dream for 300+ km and output around 25hp. I was doing a burnout and a circlip bounced out and totaled the cylinder.... Btw awesome video
To be 100% honest, I’m not an expert in that realm. Yes, it was nikasil plated. I believe in general, honing nikasil is a no go. Being it was one small spot, I wanted to try it. We put a few hard hours on this bike before I sold it and it ran like a top. I felt pretty confident in the repair. But it is probably not considered best practice.
Not really - there are so many aftermarket parts available for most of these bikes. I had some trouble finding OEM powervalve components for the 2001 KX250 build a couple years ago. For the most part it hasn't been much of an issue with the bikes I've worked on.
Ok I see, when I think of aftermarket, cheap knockoffs parts comes to mind. But I see some aftermarket parts are not so bad, OEM is best I’m sure but availability isn’t always there.
Hi, I'm from Barcelona and I love your videos. Of all the motorcycles you have, which one do you like the most or are you excited to run? I have a yamaha dt 125 re from 2008 and soon I will buy a gas gas ec 250cc from 2007 greetings from Madrid
Hey I stumbled across you video and I've been looking for someone who would possibly want a 2006 yz250f I know it needs new pistons and some new parts. Over the years I have had to replace some bolts and pieces to make it work but I live in Idaho and I would be willing to sell it for pretty cheap
Please..................beware of head-on collisions from oncoming traffic. Trust me, it will wreck your body. Been a year and I still can't ride well. Broken humerus. Dislocated shoulder and KNOCKED OUT for 15 minutes - or so I am told - from a head-on with a RZR four-wheeler.
You can certainly go watch the build video if you would like to see why it's priced that way. The suspension alone costs over $5000 and there was nothing left untouched on the build. Again, the build cost was over $12000.
You say you flip bikes. So why would you spend 12k on a build just to sell it for 7k? Something is not adding up. You’re either terrible at business or it cost like 4k to build.
it's so satisfying to watch a bike get cleaned up and polished
Right!
I saved up for a brand new YZ250 in 2000. Turned it into a Jeff Emig #11 replica with GFX kit, fmf expansion pipe and exhaust, gold excel rims and a year later it was stolen. Silently cut my garage door off in the dead of night to get to it and my German Shepherd that usually barks at a mosquito flying past the house never left REM sleep. It wasn't until 2011 until I could get another bike.
I had a car stolen, a car stereo stolen out of said car too. Even had a GF stolen off me.
Nothing hurt like that YZ not being there in the morning.
If I saw someone stealing a dirtbike, or knew of someone that stole one...all bets would be off.
Nice work on the bike. Very satisfying to watch.
Stumbled across your channel a few months ago while looking for inspiration for some of my own builds. Your content is just getting better and better, getting me motivated to get working on some of my winter projects! Keep up the great work!
Much appreciated, thank you for the comment! Best of luck with your upcoming projects!
Hey everyone! Funny story this is actually my bike and before you give me shit for the piston I had way too much to drink when I did the top end lmao. I just wanted to comment and mention I had a guy contact me and then sit outfront of my shop saying the yz 80 was stolen and I waited hours for him to leave and or cops to show up. Anyways long story short he did file a stolen reports exept he had written the vin down incorrectly by 1 number and ended up not being able to do anything about it. Anyways had a good experience with Kincade other than I freaked out when I found out it was stolen and he either didn't see or ignored my text either way doesn't matter all is well thay ends well.
❤❤ жж дд до дждддддддддддддддддддддддддддддддддддддждддддддддддддддддддддд б джддддддддддддддддддддддддддддддддддд да джддддддддддддддддддддддддддддддддддддджддддддддддддддддддддддддддд до д до джддддддд жддддддддддд до дж ддддддддд дюж до джддддддддддддддддддджд до д д дж д дд ж д д джддддддддддддд д ддддддддддддд дд дддддддддддддддд д джддддддддддддддддд дд дждддддддддддддддд ждддддддд до додж дд дд дд дд д д д6😊😊😊😅
Next time you should add up the price of everything you got for free just to see the real world profit that someone who doesn’t have access to sponsors and stuff could make on a flip like this. Bike turned out awesome btw🔥
Thanks Bobby! In the cost breakdown on screen at 8:40, I did include the total cost without sponsors - $1,672.09. And some of those things, while awesome to have, weren't necessary to still have a successful flip. Such as graphics
@@KincadePavich oh I must’ve missed that, thank you! I’m in the process of flipping a mint 2008 klx110, the bike market in my area has definitely slowed down alot tho
Non sponser builds would be more ideal
@@Hyngyynj
@@theboogieman401 ideal for you maybe 😆
I live in the Bozeman area, idk how I’ve watched UA-camrs for these past years and never found your channel… anyways, love your videos man. You got me motivated to break down my bike and put new parts into it!
Well I'm glad you stumbled upon my videos and I'm stoked you're enjoying them! Happy to provide some motivation!
Go hiking in Los Angeles canyons. My favorite is lake elizabeth rd/cyn. northeast castaic lake. Found 9--11 porsche, bmw 320, ford p.u
And numerous two wheel stuff.
7:42 the what now
This guy is a great worker on bikes. Excellent work KP, keep it up brother!.
Thank you!
Nice build.
When blowing out pipes go to 90 PSI and use two bottles of Map Gas at the same time. One bottle of Map Gas is not enough heat for the deep dents. This will take out dents on cross seams.
Thanks, noted!
Nice work. My elder brother was a nasty piece of work. He really was and still is. I was rebuilding my Honda MT 125 and fitting a CR barrel and piston to it. He was watching me. As I was fitting the piston to the conrod, my mother called out saying there was someone on the phone for me. I answered the phone call and went back to working on the bike. It ran really well and I had fun for a week before the flywheel actually came off due to the end of the crankshaft cracking open. I took the engine to a shop to have a new crankshaft fitted and on collection, they told me that the piston had been fitted the wrong way around. My ratfink brother had done that while I was on the phone. But there wasn't a mark on the barrel or piston. His ploy didn't work but your vid reminded me of it. BTW, I beat the snot out him for that.....
Damn always check other peoples work lady
Wow, that's just cruel!
It' s amazing how well organized is some things in the US (not to say everything!).The part that police officer investigate a dirt bike to tell you that is not stollen blow my mind.And as the dirt bike perts for restoration you are at another level! Very good video.Greetings from Greece!
Thank you!! I appreciate the comment - I hadn't thought about how that level of organization might be unique to the USA!
Excellent work KP, keep it up brother!
Thanks Dan, I appreciate it!
Whatever you do dont stop making these vids there great
I love the look of a rm bike! I've raced yz all through my youth , but something about the yellow bikes I love.
Thank you!
Nice work, but the clutch cable And Tracker, are they at least one of them (tracker) not Necessary to replace? 05:48, it still good condition, Just need some cleaning and painting. New one also good looking.
Love all the work you do such as the video production the bike rebuild
and the detailed description as you go about it all,!
Yep I subscribed!
Welcome to the channel!
Excellent video and editing. You do a lot of work to spruce up those bikes, and the video and audio probably doubles the time it takes to complete. Great work sir!
Thanks so much, really glad you enjoyed! Appreciate the comment!
this is truly just some good content keep it up
Thanks man!
thumbs up for mentioning Pryme.
Pryme is the best!
My 73cc cylinder has also two nasty scores under the transfer ports because both piston clips fell out, i think they were old ones because i installed them correctly. still works after honing and still has pretty good power but i believe that it will seize soon
Interesting, they were installed oriented vertically? Never heard of that happening! Glad it's running at least!
@@KincadePavich I think lost springiness by getting too hot and didnt want to stay in the groove or i chose wrong ones
i wanna build dirtbikes like this man they look sick dude I'm just getting into dirtbikes even tho I'm a little late to the game at 31 years old
Great editing!
Thank you!
Bro would u find me something for 2000 but I have no way to Hall it
May I ask how did you learn to fix bikes so well? Did you have any formal training, school? And have you ever worked for a dealership?
No, I just taught myself over the last few years via UA-cam, service manuals, calling my dad for advice, etc!
Yo my family is up by Bozeman I had no idea when I first seen your Channel till this episode you said Bozeman😂
Hell yeah!
One of the best Videos i have ever seen. What 2-Stroke Oil are you using?
Glad you enjoyed! I believe just yamalube 2R
@@KincadePavich thank you for your answer. Im a big Fan of the Castrol rs2t, but in my 50cc Scooter it doesnt get hot enough but smells a Bit Like TTS
How do you get new style plastics for older bikes
Love this vid. Subscribed
Thank you, welcome to the channel!
been looking for an engine bolt kit. just looked up fast metric. good price and nice bolts
Good deal, yeah I've been using their kits for years and have been super happy with them!
Nice video. Im also saddened that all your CoD videos are gone ☹
They're unlisted... I felt it was the right thing to do for the direction my channel is headed. Let me know if you ever want a specific link to one!
I had this this exact issue with the clutch. Super common on these rms. Replaced that single part and its like new. Love the builds my bro keep up the great work 🤙
Interesting! Yep, funny one to solve having never seen that before! Glad you enjoyed, thanks for the comment!
when i was assembling my 70cc kit on my moped i had it all ready to run but luckily a person on snapchat saw my story and pointed out that the piston was on backwards.
Whew! My brother did a top end on his KTM 300 and forgot a piston circlip. He noticed before he started it, but had to take it all back apart!
@@KincadePavich when we built my 88cc big bore, we installed everything correctly and it ran like a dream for 300+ km and output around 25hp. I was doing a burnout and a circlip bounced out and totaled the cylinder.... Btw awesome video
What staple gun is that. Looks like it did a nice clean job seating those staples
It does great! It's just the cheap one from Harbor Freight! Have done many seat covers with 0 issues.
Where did you get the clutch pivot shaft
Rocky Mountain!
So it wasnt stolen then?
was it a nikasil plated cylinder and is that safe to hone?
To be 100% honest, I’m not an expert in that realm. Yes, it was nikasil plated. I believe in general, honing nikasil is a no go. Being it was one small spot, I wanted to try it. We put a few hard hours on this bike before I sold it and it ran like a top. I felt pretty confident in the repair. But it is probably not considered best practice.
Do you have any trouble finding parts to rebuild older bikes that are no longer in production?
Not really - there are so many aftermarket parts available for most of these bikes. I had some trouble finding OEM powervalve components for the 2001 KX250 build a couple years ago. For the most part it hasn't been much of an issue with the bikes I've worked on.
Ok I see, when I think of aftermarket, cheap knockoffs parts comes to mind. But I see some aftermarket parts are not so bad, OEM is best I’m sure but availability isn’t always there.
Hi, I'm from Barcelona and I love your videos.
Of all the motorcycles you have, which one do you like the most or are you excited to run?
I have a yamaha dt 125 re from 2008 and soon I will buy a gas gas ec 250cc from 2007
greetings from Madrid
Lately my GasGas EX350F has been my favorite to ride! That said, it's hard to beat the fun factor on a 125!
This is awesome!
Thank you!
so it's not stolen? why does the title tell us otherwise?
This guy is a great worker on bikes
How do you put newer models plastic on older bike?
its a polisport restyle kit, but some older models dont have a restyle kit
The surface MUST be smooth like glass before any paint is laid down for this effect to work. Like any paint job, it's all in the prep work.
Hey thats my suzuki!
Is your doggo a Welsh or Lakeland Terrier?
Welsh Terrier! My roomate's dog!
Is that the rabaconda 3 min change model?
Yes it is!
@@KincadePavich ok word i will be making that purchase soon
So what ive learned is there's harldy any money to be made unless youre getting oarts fronted to you thru sponsorships 😂
How did you learn all this ?
UA-cam, service manuals, etc.
Yea idk about that pro x il stick to wossnor
Nice to be nice ! 👌
never touched a dirt bike before, dont know why im watching this
Why would you sell your rebuilded rm 125? I would keep it if i were you
Space and funds for the next build! Can't keep 'em all!
@@KincadePavich ah okay
Dude i live in Australia 🇦🇺 & i so want that 03 suzuki RM 125 😭
Hey I stumbled across you video and I've been looking for someone who would possibly want a 2006 yz250f I know it needs new pistons and some new parts. Over the years I have had to replace some bolts and pieces to make it work but I live in Idaho and I would be willing to sell it for pretty cheap
Hey there, I might be interested for the right price. Feel free to shoot me a message on Instagram @kincadepavich or email me kincadep@gmail.com.
do you make good money doing this?
Not sure if its a scam but u doing the give away?
No, it's a scam. Not me.
U can acuid tone those aluminum covers cosmetic make a difference
the title suggsets that you stole a 1700$ dirtbike and sold it
Please..................beware of head-on collisions from oncoming traffic. Trust me, it will wreck your body. Been a year and I still can't ride well. Broken humerus. Dislocated shoulder and KNOCKED OUT for 15 minutes - or so I am told - from a head-on with a RZR four-wheeler.
Yikes! Sorry to hear that. Scary stuff.
6:28 anyone think that's satisfying?
um title is kinda clickbait but i will let it slide lol it was some good content.
Lol glad you enjoyed it
Why sell the '03 😭
It's time! Had a blast building it, had a blast riding it, onto the next project!
7 grand gets you a 2022 gas gas. A little steep for old technology. Nice bike though
$7000 for a 2003 rm125 an i missing something
You can certainly go watch the build video if you would like to see why it's priced that way. The suspension alone costs over $5000 and there was nothing left untouched on the build. Again, the build cost was over $12000.
I'll save everyone from watching the video, steal it snd sell it cheap 😉
Well that certainly isn't what happened
@@KincadePavich obviously, it's called humour 😄
next time no clickbait title
I had a bike stole ,it's not nice
👍
You say you flip bikes. So why would you spend 12k on a build just to sell it for 7k? Something is not adding up. You’re either terrible at business or it cost like 4k to build.
I have sponsors. And my primary focus on complete builds like that is not turning a profit. That bike isn't a flip.
Lucky you don't live in the uk the police would have taken the bike off you so you would just have lost money
or just steal and sell it
most clickbaiting title ever seen on yt
But did you enjoy the video
"The clutch cable shaft was a cool one to solve" That one kept you up at night didn't it.
Haha I knew there had to be an answer!
125 is for kids ;)
Hello
Hi!
@@KincadePavich nice refresh on the RM
@@KincadePavich as a kid I had a 89 kx100
Yoo im dead i was this in pa
Clickbait of the week
Did you like it tho
@@KincadePavich ofc bro
քʀօʍօֆʍ
can i have a free bike please
no
please??@@KincadePavich
beautiful.
Who wouldn’t buy a bike from him
Clickbait BS
👍