@@DONK8008 - Yes, that was in there a good way. So, if you ever need to punch a hole in your ceiling in a potentially lethal way, you just need a waterjet, and a skateboard.
Its getting through the door thats the real problem. honestly, so what it takes them an extra hour to set up, they need to optimize their shop because they will probably be using that same machine in 10 years
@@pws3rd170 If you have the clearance around the door then getting it in is actually pretty easy. I used to bring 16Ft lumber through 12ft doors all the time.
The factory tech doing the installation was TOTALLY IMPRESSED. Good job. He will probably want both of you to do all future installation tests across the country. ATTA BOY(S)
"Uhhh... why is there a grapefruit, watermelon and cantaloupe with a hole cut in them in the bin?" *panicked stuttering* "WE WERE TESTING THE NEW WATER JET!"
I also work with water jets but in an industrial scale. All my equipment is portable and its 40,000 psi. I go into refinerys and such and cut out reactor's and big piping and such. Love your channel guys.
Having recently binged many dozen of your videos, this might be my favorite so far. Those underwater shots had a unique kind of artistry and I'm glad you took the opportunity to get them.
@@F1u0r But is there really a need to go over 60000 psi? because the only hard time waterjets have is when cutting aluminium nitride ceramic plates. 60000 psi waterjets will cut everything.
I work with CMMs so it was really interesting to see another big precision machine get installed and calibrated! I'm looking forward to see what kinda weird shit y'all do with this thing!
Installer: Ok, so I've finished installing your new water jet. Let me discuss your warranty with you. Dan: Hold on, we need to cut a watermelon first! *uses water jet in a way that is clearly not in the user manual* So, you were saying? Installer: Nothing, never mind.
@1:40, "do what you can with what you've got." I said the same thing today to a family member who has come upon hard times. Thanks guys, can't wait to cut stuff up!
Love the underwater shots! I run a waterjet at work and have been told that a guy who worked there before me accidentally cut a hole in the bottom of the tank from dwelling too long... I can neither confirm or deny
My boys got that upgrade. We had 3-axis Flow Mach 2b (4020b). Don’t use flow nesting because it is ehh. Also the guy from Flow is named James, cool guy.
FlowNest is junk. I use Radan and export the nests as a dxf. Flowxpert cant handle top many parts, it gets bogged down. Your best off making a small nest and using FlowCut to create an array..
Tony Langton I use multiple programs to nest for different situations. Majority of times I just end up using Inventor Nesting because it will automatically change the nesting(this only happens, if you made .ipt on inventor).
I was hoping you guys would get one of these. I recently saw it on another waterjet channel that was in my recommended feed and thought to my self when will you guys get one! So excited to see what you end up doing with it! Congrats on the new toy (tool). 👍🏻
Jason from Fireball tool mentioned if you leave it on in one spot long enough it’ll cut through the floor of the tank. But I think his was like 94k PSI or something crazy. And he may have been talking about with abrasive. Either way, I’m stoked to see what y’all cut!
Destin from smarter every day needs to see this! 8:14 I wonder why there is a burst of bubbles directly below the jet a fraction of a second before any water is actually pumped into the tank? Also did you see the eddy currents coming off of the 🍉? Awesome!
I remember learning about these machines in Orange County Choppers, back in the day. I´m from germany so it was running on a different TV station here but I still remeber how they work, what they cost and what they can do. It was fun to see, that someone ordered one and youtube recommended that;D
I work water jet and the difference between this new machine and the older machines is crazy. They got the newest mach and it’s way less bulky than the older ones and has way smaller components and everything is more compact and nice
That's the cleanest that tank will ever be
That is the cleanest any such tank first looks when newly minted and set up.
@@Joshua79C duhh
So Mitchell, did you lick test the installer to confirm he was an actual water jet installer? You may have got scammed if not.
911 I would like to report a crime
He was the Zen master of water jet installers, didn't you see the beard?
He seemed like a pretty good guy
@@asvarien But the beard would need a lick test to confirm it was not a fake beard.
12:15
Water jet unboxing I’ve seen it all
More like uncrating
Telenisis but what is a crate if not an arrogant box?
@@SentinalSlice more like a thicc box
UA-cam is filled with water jet unboxing videos. This is arguably one of the best.
A body unboxing?
Big and awkward? Did you order a waterjet or another Mitchell?
Austin Glickman yes
Woman: I bet he's thinking about another girl
Man: I wish I had a *5-axis Flow Mach 200*
Pretty much the only thing a man would want
@hotaru25189 a comparable model to the one in the video from 2008 is $100,000 used. I have seen some smaller ones as cheap as $10,000
Something Nothing this model retails in the neighborhood of $250,000 I’m pretty sure
@Sonac No, a 3 axis one from a different company.
Hehehee
old waterjet giveaway?
Or for sale?
WaterJet a WaterJet?
Moiby
Yes please
Hey mom I won a water jet where can we put it?
My only question is did you find the skateboard wheel when you cleaned up the area...???
They found it a while ago embedded in the ceiling insulation.
@@DONK8008 - Yes, that was in there a good way. So, if you ever need to punch a hole in your ceiling in a potentially lethal way, you just need a waterjet, and a skateboard.
You know what sounds like a good Idea? Lets put the LARGEST PIECE OF EQUIPMENT AS FAR AWAY FROM THE DOOR AS POSSIBLE!
Its getting through the door thats the real problem. honestly, so what it takes them an extra hour to set up, they need to optimize their shop because they will probably be using that same machine in 10 years
@@pws3rd170 you do understand what a joke is right? Who are you Ted Mosby?
@@pws3rd170 If you have the clearance around the door then getting it in is actually pretty easy. I used to bring 16Ft lumber through 12ft doors all the time.
@@princeofdeath7696 I bring 24ft stock sheets of grating in with a hi lo
@@DanielRichards644well a joke is usually funny
can you see what happens to a prince rupert's drop when hit by a water jet?
They should collab with smarter every day for that
It explodes
@@Matt-dy7uq the waterjet?
Nate Walkner yeah why not
Matt XD
So that’s how they make watermelon infused water
except they watermelon jet whole watermelons into the water. That's right! They cut through water.
New 5 gum watermelon.
Water infused watermelon
This has to be one of the biggest unboxing videos on youtube.
*unbox therapy wants to know your location*
The factory tech doing the installation was TOTALLY IMPRESSED. Good job. He will probably want both of you to do all future installation tests across the country. ATTA BOY(S)
11:28
That shop must be doing very well to spend 125K - 150K on a new system. So it's not all play after all! :-)
yea huh
Now we can make twice as many circles
They make circles lol
"Uhhh... why is there a grapefruit, watermelon and cantaloupe with a hole cut in them in the bin?"
*panicked stuttering*
"WE WERE TESTING THE NEW WATER JET!"
Installer just shrugged his shoulders like "Eh I'm not really in a big hurry to get this done"
If I'd be paid as much as he is for the hour, I wouldn't be in a rush myself.
@@wojciechbieniek4029 if i was the installer i would have a hard time rushing because i would be more laughing
Video idea: Toyota vs Nissan forklift
tug-of-war
Mosquitobrain my Xterra out-pulls FJs everything so idk🤷♂️
Mosquitobrain wins what the how to let everyone else know I’m Mexican.
They both suck. Give me a Crown
I also work with water jets but in an industrial scale. All my equipment is portable and its 40,000 psi. I go into refinerys and such and cut out reactor's and big piping and such. Love your channel guys.
Nice clean wall for Mitchell to throw clay at. You can hear it crying out for some hard clay action.🤔
This new waterjet is worth at least 250 000 new subscribers !
Having recently binged many dozen of your videos, this might be my favorite so far. Those underwater shots had a unique kind of artistry and I'm glad you took the opportunity to get them.
That will be some very nice cut circles now!
Next video: *cutting a water jet in half with another water jet*
SS Squidy *how did you edit your comment and not fix the spelling error*
So is it a 60,004 psi waterjet?
yes. Its to cut those materials that 60000 just isnt enough for.
Plus
It can punch you in the stomach
It actually has 4250 bar, so 61,641 psi^^ The Mach 500 could be bought with an 6500 bar pump, so almost 95,000 psi :O
@@F1u0r But is there really a need to go over 60000 psi? because the only hard time waterjets have is when cutting aluminium nitride ceramic plates. 60000 psi waterjets will cut everything.
@@Sharpless2 No, not really, but it would be faster :D And maybe you don't need as much abrasive?
I bet they made that installer's day. He probably went back to the office, talking about these guys to his co-workers. 😂
I work with CMMs so it was really interesting to see another big precision machine get installed and calibrated! I'm looking forward to see what kinda weird shit y'all do with this thing!
You guys should do what some other guy said Toyota vs Nissan forklift tug of war I’d love to see it
Haha, that would be pretty funny
@@WaterjetChannel yes please
Installer: Ok, so I've finished installing your new water jet. Let me discuss your warranty with you.
Dan: Hold on, we need to cut a watermelon first!
*uses water jet in a way that is clearly not in the user manual*
So, you were saying?
Installer: Nothing, never mind.
You got to wonder if the delivery guys knew these are the WaterJet Guys?
Haha, it actually went a lot like that.
After seeing them cut that watermelon, they definitely need to do a Halloween special by carving a pumpkin!
There better be a “Waterjet cut in half by Waterjet (in slomo)”
That is one of the most beautiful piece of machinery I have EVER seen!
Sweet machine guys! Your going to love it. Great footage of the jet underwater. So cool! Jason
@1:40, "do what you can with what you've got." I said the same thing today to a family member who has come upon hard times.
Thanks guys, can't wait to cut stuff up!
I legit thought you guys rented a new place, it was that clean haha
Love the underwater shots! I run a waterjet at work and have been told that a guy who worked there before me accidentally cut a hole in the bottom of the tank from dwelling too long... I can neither confirm or deny
You have to lick test the waterjet to make sure it's authentic
He did that at the end
@@bigrone5153 I commented before I saw that part
11:30 has to be the most satisfying moment ive seen ever
Dio!
The company I work for, dynatect gortrac made that hose and cable carrier (cat track) for your machine
Ah such a small world it is
This is the best waterjet unboxing video I've seen in a long time
How many have you seen?
My boys got that upgrade. We had 3-axis Flow Mach 2b (4020b). Don’t use flow nesting because it is ehh. Also the guy from Flow is named James, cool guy.
FlowNest is junk. I use Radan and export the nests as a dxf. Flowxpert cant handle top many parts, it gets bogged down. Your best off making a small nest and using FlowCut to create an array..
Tony Langton I use multiple programs to nest for different situations. Majority of times I just end up using Inventor Nesting because it will automatically change the nesting(this only happens, if you made .ipt on inventor).
I don't know why but this was actually entertaining. God bless you all!
hey, with that Hopper in place you can record 6 shows at once now!!
i used to install for them. your comment gives me agita
also, get the hopper 3, and you can record 18 at once
pleb
Get out of here DIRECTV!!!!
5 axis... I can't wait to see the fun you guys have with this thing.
WaterJet unboxing video. Sponsored by IKEA.
We supply the parts, and you put it together.
Well, after looking the size of it, shipping it in pieces was the best idea they have.
Honestly. Congrats on the upgrade guys, your company must be doing good !
Nobody:
Demons communicating under my bed: 9:04
Nick Murray wake me up my sleep paralysis demon is here.
I’m super psyched that y’all got a 5 axis waterjet. This is gonna be awesome.
8:30 what my toilet sees after a night of drinking beer.
Honestly the only channel for water jet excellence
* Licks waterjet *
"Hopefully you guys enjoyed that"
That sound when the water hit the water was awesome
Those mid sized waterjets go from 100,000 USD to 200,000 USD
Okay, that is pretty cheap...can you buy me one quick and send it to Wisconsin. Thanks.
Probably half off for the branding of having their logo constantly show up on THE water jet channel.
thats not bad dang
@Konr Ness large ones are 90,000 psi and dual bed
What would you even need the 90k for?
At 6:25 are those bolts supposed not get tightened all the way down or something?
You should break it in with another skateboard wheel video
They do risk the rubber smacking the waterjet and breaking it. 5 Axis and all that.
This is so cool on how they got a new water jet it looks amazing and I like seeing the tank with clean water for the first time
Those underwater shots really made me want a can of seltzer
My company is looking at getting 2-4 huge waterjets from Flow. This was more informative than 6 months of meetings and emails.
You should go swimming in there😁
It's a little pool for babies
This is the best waterjet unboxing i have ever seen.
needs an AvE "not to be operated by fuckwits" sticker.
No more videos... 😔
Ken Oakleaf what you talking about? He still posts.
Colin Stuart you’re dumb
@@colinstu r/whoooooshhhh
@@syafiqaiman3548 WHAT IS THE FUCKIN JOKE HERE????
It's amazing to see the water being so clean
waterjet your old waterjet with your new one!!!!!!!!!!!!
HAA
Pouring the quartz into the hopper was beyond satisfying holy shit 11:29
I recently ordered a couple if knife blanks, so they were likely cut by this beast!
I was hoping you guys would get one of these. I recently saw it on another waterjet channel that was in my recommended feed and thought to my self when will you guys get one! So excited to see what you end up doing with it! Congrats on the new toy (tool). 👍🏻
What does flow machines offer that other machines, such as OMAX, don't offer?
nothin', it's the same shit. duh. Science is only 1.
@@dimitar4y not sure you understood what I was asking... But thanks for responding....
Best unboxing video I've seen
Jason from Fireball tool mentioned if you leave it on in one spot long enough it’ll cut through the floor of the tank. But I think his was like 94k PSI or something crazy. And he may have been talking about with abrasive. Either way, I’m stoked to see what y’all cut!
Are you from the south
@@johnhess3967 why? Because he said y'all? Is yinz better then?
T.V. Man I was born in Maryland. But I’ve been in the army for the last 11 years. Everyone from all around the country says y’all for the most part.
Nice to see UA-cam's paying you guys well 😉😉. Beautiful machine, keep up the great work and vids!
Did you find the skateboard wheel?
Destin from smarter every day needs to see this! 8:14 I wonder why there is a burst of bubbles directly below the jet a fraction of a second before any water is actually pumped into the tank? Also did you see the eddy currents coming off of the 🍉? Awesome!
Now you guys can do water jet vs water jet
Best water jet unboxing I've seen yet
You should make a 4,000 bar espresso.
The waters soooooo clean 🤯
what was the price all of that?
too fuckin much, bud
Probably at least 150k
Not hard to find Purchase prices online, but installation costs is another matter.
Best effect from the jet all yet. Amazing.
Stomach punchies! I need that sticker for my girl.
The under water shot was so serene.
This wasn't out of jealousy from another waterjet channel was it?
The clear water in the tank looks refreshing
what does something like that cost?
Will Lawrence 100k-200k
@@yankee2093 really? I was thinking a little more but I guess that sounds about right.
Lol, James is like "Do what you want, I get paid by the hour." 🤣
16 watermelons disliked this video.
I was pretty sure it would be a new water jet. Well done guys!😎 I love nice new equipment. Hard to use them when they are so nice and clean lols!
The thud when the jet hits the water!!
I remember learning about these machines in Orange County Choppers, back in the day. I´m from germany so it was running on a different TV station here but I still remeber how they work, what they cost and what they can do. It was fun to see, that someone ordered one and youtube recommended that;D
This has to be the happiest day of my LIFE!
James was the coolest guy ever
7:16 that synced laughing 🤣
This has to be one of yalls coolest videos
that makes the coolest sound when you first turn on the jet.
That brake press is a beast😵
That's one hell of an unboxing
I work water jet and the difference between this new machine and the older machines is crazy. They got the newest mach and it’s way less bulky than the older ones and has way smaller components and everything is more compact and nice
Not even to mention the 5 axis’s which would allow for cutting at almost a 90 degree angle
I know a good bit about water jets, ask me anything
Hmmm... what’s your favorite color?
Gotta go with orange
I know the slats are sacrificial, but what protects the structural supports inside the tank near the surface? Are they also sacrificial?
that vortex around the watermelon was cool
Congrats on the new tool!!
Can you do a really complex cut that shows the benefits of a 5 channel head?
The sound underwater is amazing
Nice now time for a water jet competition with fireball tools!