The heads are getting a 5 angle valve job, screw in 7/16 rocker studs, and guide plates. In the video i am machining down the rocker cover rail. I always have trouble with making them seal leaving them as cast. I am doing the work myslef as i work at a machine shop.
Eaton Tru trac centre for the diff . Its a Torsen differential design Flat top 400 pistons with 75cc heads =10.3CR ,,,,, cyl head 65cc flatop 11--11.3 to 1 CR //Deck to piston height of .005 Dynamic Compression needs to match your cam timing flat tappet cam with 2.02 valves around 400--450 max hp with a street cam 400 with hyd roller 242/248 ,,,,,11.2 CR,,, 2.1 inlet valve 220CNC heads 540hp [bigger SR cam ,,, inlet manifold 575hp and bigger carby ] 400 hyd roller 230/236 10.5cr 2.05 inlet valve 195cnc heads 495hp D/plain inlet manifold
Your neighbour is going to love the new engine and exhaust 😂👍
Your stuff came up on my feed,love what you're doing.
New combo should be sick as brother 🤙🏽 Had a 406 in my Q was an awesome engine. Now have a dart AFR headed 400..what an absolute tyre fryer 😎
These projects never finish.
Are you doing the head work yourself? What exactly gets done to heada?
yea I was wondering this too
The heads are getting a 5 angle valve job, screw in 7/16 rocker studs, and guide plates. In the video i am machining down the rocker cover rail. I always have trouble with making them seal leaving them as cast. I am doing the work myslef as i work at a machine shop.
Satin black bonnet might be an option?
Good luck bro
We are working on an old ht ute at the moment just got it driving but no brakes haha
Eaton Tru trac centre for the diff . Its a Torsen differential design
Flat top 400 pistons with 75cc heads =10.3CR ,,,,, cyl head 65cc flatop 11--11.3 to 1 CR //Deck to piston height of .005
Dynamic Compression needs to match your cam timing
flat tappet cam with 2.02 valves around 400--450 max hp with a street cam
400 with hyd roller 242/248 ,,,,,11.2 CR,,, 2.1 inlet valve 220CNC heads 540hp [bigger SR cam ,,, inlet manifold 575hp and bigger carby ]
400 hyd roller 230/236 10.5cr 2.05 inlet valve 195cnc heads 495hp D/plain inlet manifold
I think I might have asked you in a previous vid but where did you get your wheels? Are they 15's and do the factory caps fit ok?
Yes, 15x6 on the front 15x8 on the rears. The hubcaps do fit with a little modification, bought them from wheel and tire kingdom.
@@Joedennett69 Beauty. What kind of mods? To the rim or caps?