You are the best. My belt just came off. I put it back on and it worked. It was so easy. Thank you very much. I was on my way to Walmart to buy a new vacuum and thought I would this before going.
Absolutely awesome! Couldn't have done it without you. My main problem was...I had removed the air filter to wash it when I awaited the belt...then I kept trying to put it inside with the belt assembly...finally dawned on me! The filter goes through the tank part. LOL
My vacuum sucked up a string and broke the belt exactly as you described. I got the replacement belts at Wal Mart this morning and fixed it up good as new after watching your video! Thanks!
This was excellent, thank you! I first watched another video which didn't show how to get the brush back on with the new belt, which was my issue. Yours did. Was very easy as soon as I watched your video - thanks!
Well, the Sheet-rock dust is probably going to kill the motor, you might get a small shop vac if you have more remodeling to do since they have motors meant to accept things like that, thanks for the belt change video👍🏻🙂
Thanks for the information. We have two Bissell vacuums, but different colors and product types. However, on the bright side, parts are interchangeable as far as the bottom goes. The newest one had a burning belt smell. Turns out the belt was wearing onto the brush where the belt goes. So I just switched the belts and the brushes out. The moral of my situation to anyone reading this, do not throw away the oldest vacuum.
Awesome! Seems like an easy fix. My belt broke also so I’m wondering if that’s the reason it doesn’t suck anything up? I’ve cleaned the filter and that didn’t help either
I replaced the belt on my Bissell vacuum. However, the belt keeps coming off the shaft after a few uses and I have to re-set it. Do you have any idea why this happens?
Is there a piece on the shaft from the motor....mine doesn't spin and the wife thinks I probably lost a piece. I tried flipping the belt but it started burning
Is it normal, for it smell like burnt rubber/smoke? I followed the UA-cam video, and checked everything. Sec I started using, My boyfriend and I smelled burnt rubber/smoke….
You are the best. My belt just came off. I put it back on and it worked. It was so easy. Thank you very much. I was on my way to Walmart to buy a new vacuum and thought I would this before going.
Absolutely awesome! Couldn't have done it without you. My main problem was...I had removed the air filter to wash it when I awaited the belt...then I kept trying to put it inside with the belt assembly...finally dawned on me! The filter goes through the tank part. LOL
My vacuum sucked up a string and broke the belt exactly as you described. I got the replacement belts at Wal Mart this morning and fixed it up good as new after watching your video! Thanks!
Is there a specific size???
@@paulhernandez8697 I got the Great Value 2 pack and it says it's for styles 7, 9, 10, 12, 14 and 16. My vacuum is working great.
This was excellent, thank you! I first watched another video which didn't show how to get the brush back on with the new belt, which was my issue. Yours did. Was very easy as soon as I watched your video - thanks!
Well, the Sheet-rock dust is probably going to kill the motor, you might get a small shop vac if you have more remodeling to do since they have motors meant to accept things like that, thanks for the belt change video👍🏻🙂
Thanks for the information. We have two Bissell vacuums, but different colors and product types. However, on the bright side, parts are interchangeable as far as the bottom goes. The newest one had a burning belt smell. Turns out the belt was wearing onto the brush where the belt goes. So I just switched the belts and the brushes out. The moral of my situation to anyone reading this, do not throw away the oldest vacuum.
Yay! This gives me hope that I can change my own belt.
Thank you soo much! Couldn't figure it out till you!
This was really helpful. Thank you!
Great job, worked perfectly ...Thanks
Thanks Chris! 👍😀
Nice. Take that filter out at the top and bang it out while you're at it. Thought that was my problem at first.
you actually take it to a sink and wash it.. if you have never done that it might blow your mind..
Simple and easy thank you
Very helpful video
Awesome job explaining and demonstrating how to do this repair! Keep it up!
Thanks man
Thanks!
Thank you
What did u use to get the plastic screw out
Awesome! Seems like an easy fix. My belt broke also so I’m wondering if that’s the reason it doesn’t suck anything up? I’ve cleaned the filter and that didn’t help either
Could be your issue, but it could also be clogged as well
Is there anything on the shaft? Mine is bare metal
I replaced the belt on my Bissell vacuum. However, the belt keeps coming off the shaft after a few uses and I have to re-set it. Do you have any idea why this happens?
Is there a piece on the shaft from the motor....mine doesn't spin and the wife thinks I probably lost a piece. I tried flipping the belt but it started burning
What was the size of the belt? I have the same vacuum cleaner
Thanks
What while cause my belt to sound weird and to keep popping off
My belt keeps disconnecting and I keep having to reconnect it. Know why it keeps slipping?
you might need a new vacuum., it has a self centering place the belt rides on .. or either your belt is too loose
Is it normal, for it smell like burnt rubber/smoke? I followed the UA-cam video, and checked everything. Sec I started using, My boyfriend and I smelled burnt rubber/smoke….
no.. belt too loose or something keeping that fuzzy wheel from spinning
@@chriscraft2 I found out what went wrong, my belt broke! 😰 I only used it for, a a sec…. So… now what?…
you have to make sure the wheel with bristles spins easy.. there’s a rock or hair or something in it
I did this same thing but now the belt keeps breaking.
I don’t know.. that belt I put on in the video is still running strong
Turn it off! Good god! 🤣🤣