Here is a link to a well put together video on one of my hands on training sessions. Hopefully, I can get the shop done in a timely manner to do more of these. Who is interested?🙂 ua-cam.com/video/0bPm5uxtypY/v-deo.html
Yesss I've been waiting for this. Thanks for listening to your community! This is one of those products that really stood out to me. I applied this to my brother's truck that he never washes and regularly takes it offroad. It's still beading strong since I applied it on Christmas day.
You also get more control with consistent application pressure for more complete and even coverage.. 👍👌✌ I would not recommend applying with an application pad on paint that isn't already very clean. The short knap and small contact area don't provide a lot of safety, so check your pads frequently..
This BSD blew my mind when I first used it few years back in terms of gloss and durability. Used it purely as a drying aid and it never streaked. Only reason I stopped using it was because of the neverending flow of new products! Great reminder of what I have sitting dormant in my cupboard. Only thing I didn't really like was that it lacked slickness that other products had.
Allen Maestas I’ve been using it full strength as a drying aid and switched to Bead Maker, because the Sonax was streaking. I guess if I was using it properly, I wouldn’t have been have troubles with it. This is by far the best detailing channel on UA-cam
Hey Brian. I got very excited when I saw this video. I knew you would give an honest practical review of BSD. I also do painting in my shop, and not having silicone is a BIG tick for me. I also have diluted it with deionised water, and used it the way you just showed. I'm glad I'm doing the right thing, as it was just to extend the last bit I had in a bottle. Ticks all the boxes for me. A brilliant product. Look forward to your next vid brother. Kev KP Daly Automotive UK
Thanks Brian!! I just ordered like 12hrs ago and was looking for the best way to apply and get the best out of it. what a product! thanks again keep up the great content!!
I'm glad I found this channel for many reasons but in particular the spraying of the product into a wax applicator to use less. Had I not seen this I would've surely sprayed too much product, thanks Brian😃
My daily driver needed protection for the winter. I did the Sonax Polymer Net Shield, Spray & Seal and BSD combination recommended by Brian in another video. Gloss is just as good as a ceramic after the 7 day cure time but without the wait. Can't wait to see how it holds up to our winters.
Damn, that sounds like a tough combo. How did the products bonded together in your opinion ? Also seeing your comment was posted 9 months ago, maybe you could give a quick review of how it held up ? Did it meet your expectations ? Thank you !
Brian, you're an alchemist my friend!! Just tried this and it works impeccably! May I suggest to others to use a super plush microfiber towel if the car is really dirty? It really augmented this stuff and safely sucked up the dirt without scratching. Thanks for the incredible ongoing tips!!!!!
I've been using BSD for a few years now and really can't praise it enough , it's a product that gets used and doesn't end up sitting in the cupboard like some "fad" products , my wife's Landrover has BSD on it and I rate it better than the Fusso that my car has on .Great info as ever Brian .
BSD is a great topper for Fusso or as a drying aid over Fusso. I've been doing that for over 6 months and the car looks better now than on the day it was fully detailed back in September.
Thank you Brian and again well done. I was eagerly waiting for a professional advice on this product because this one is widely available in my country.I wish i had bead maker here.
THANK YOU Brian for this one... Been using BSD for a while and diluting it down 3:1 has been allowing me to get a gallon out of a bottle using 32 oz. spray bottles, with about a little under half a bottle of full strength left. Again THANK YOU!🍻
Brian, Big thanks for all the great tips for product use as you always do in your video's. I always check in with your Apex channel for lots of helpful reviews.
I imagine this would work well on top of Poorboys black hole. Long lasting and easily maintained gloss, with no clearcoat reduction. Definetly something I’d like to try out. It would be great to see a comparison test on Sonax BSD and Turtlewax seal n shine.
I really do like BSD and I think, as you highlighted when used as a drying aid or even when spread with a damp cloth it's the perfect all round QD. Using it this way I get no issues with application and the protection is 2+ months with great hydrophobicity. My only issue is the rinseless wash method. For me I wouldn't go near anything other than light dust with BSD, even diluted like this. It just doesn't have enough lubricity for me and used on that amount of dirt I personally don't believe it would clean the paint safely. Only my thoughts Brian and not saying I am right.
I mix it 1 to 1 with CG V07 and it goes on easy, no streaking, incredible slickness and shine. Mixes homogeneously and hasn't separated in a several days since mixing a total of 16 oz.. have read also works well with Adam's QD. Wish I could post a photo because the results blew me away
@@apexdetail85 Interestingly, it does not play too well with Beadmaker according to Jon at Forensic Detailing. The successful list seems to be V7, Adams QD and Megs QD.
Hmmm Brian, I never thought to cut this for drying aid purposes. I’ll give it a try!! Btw, that filling was impressive! Had no idea this could fill in so much. Definitely brought that panel up to life, even though I don’t protect without correcting, it’s still interesting and impressive.
Loving to see some new content showcasing BSD's outstanding qualities. Sonax keeps it honest price-wise, even after so many years of being such a popular product. Unless the car is really dirty, I just power wash it and use BSD as a drying aid. The foundation sealant I have down is Fusso Coat and both products work super well together. I love seeing the beading and crazy sheeting when the car is in movement. It works great on glass/windshield and wheels too. Better still, you can buy it online in the UK for under £7 from Euro Car Parts. Great job, Brian!
@@hdmuzzillo it works as a sacrificial layer to prolong the life of Fusso Coat. They chemically match very well so you get the same water behaviour for longer. Bear in mind I don't use soap at all. I just spray APC (Surfex HD), rinse and use BSD diluted for my contact rinseless wash process for its cleaning ability. If use use the 2 bucket method, I'd suggest using BSD once very 2 or 3 months over Fusso Coat.
The Sonax BSD and the Synthetic Spray Wax from Adbl are really the best spray sealants for us in Germany. Use it 1:1 and there is no different to use it pure
I usually do my waterless clean on my ceramic-coated car with Meg's UQD but I ran out of it yesterday eveniing and used BSD. as I had some laying around. I does lubricate a lot less than UQD which means application was not the easiest. The "glide" feeling (when you let your fingers run over the uber-smooth, cleaned surface) once the job is a lot less present too. It is very viscous for sure., I didn't think about diluting it maybe that would have helped. Thanks for sharing some of your tips.
Hello I use BSD since 3 Years. I mixed it 50\50 with destilated water. Easy to use...the original spray bottle is bad...i use a kwazar 360 a a Foam-pad to apply an a Microfiber towel to buff off... 4 month in a german winter and the beading and sheeting is good, not perfect, since there.. Bad english, i know 😙😉
@@fdu6 How many Kilometers or miles di you drive in one month? The wether, is it hot where you are living? I think round about 2-4 month is realistic. In my car, 4500km in one year, parking in a garage, german weather. 6 month. Absolutly awesome.
Another great video Brian. Have been using BSD for some time now and full agree with you comments. It does a very good job through the uk winter months. I also mix sometimes with Bouncers “Done and Dusted”😀. You might have seen John over on the FD channel has done a review video on mixing BSD with P&S bead maker...with mixed feelings on the results!,
2 questions : 1) Can it be topped over polymer based wax (not sealant or Carnauba wax) ? 2) Can it be topped with a silicon based shiner to get extra gloss without affecting water beading capabilities ?
⚠️ Many thanks for your amazing videos, and I have a question... Can this product be applied as engine bay and underneath the car to protect it as well❓
I like your video. In the end i think you make waterless wash, not rinsless wash. In the dillution rate 3 to 1 with water would it better to add in 1 liter bottle spray and 20ml ONR or Ech2o for more lubrication? Thank you for your time
I would be very intrested in a video with the last topic in this one. About coating and how to treat it afterwards. And maybe a video on Maguire's products. Thank you also for this video very helpful and very Interesting 😊
Hello, Can I use Sonax Brilliant Shine Detailer on engine bay and undercarriage... "I know that there are other products for such areas, but is it good to have Sonax Brilliant Shine Detailer"
God damn, I’ve just ordered the Geyon Wet Coat as per one of your recommendation video and now you give me that tips ?? LOL Now I have to buy this Sonax product to test it out on another familly car.
Apex Detail Yeah that’s what I’m gonna do, I’ve just spend more than 200$ of different product last week to start it up, already have a rotary polisher, electric pressure washer and gaz pressure washer and a few stuff bought last year. A good start I thing
Just quick question, if you read it.. wondering never saw anyone puting it on glass. Is it posibble to use on Glass after buffing to be clear and protection?
@@apexdetail85 Brian! Great video demo of the Sonax BSD! I used the Sonax Spray and Seal on my next door neighbors silver Camry! I did a basic strip wash, no claying and applied the Sonax Spray and Seal and damn if it didn't get great beading and a really nice slick gloss on the Camry! I used my little "Metrovac blaster sidekick" and the water sheeted and blew off effortlessly in a very short time! I was really impressed with the Sonax Spray and Seal! I've heard that the Spray and Seal can last anywhere from 1-2 months and if you layer it everytime you wash it will obviously longer and extend the shine and gloss! What's your take on how the Sonax Spray and Seal stacks up against the BSD! :-) Hey I went by autozone today and picked up a box of the "Astro Grip" 7mil nitrile gloves and they are a very high quality nitrile glove and have the texture surface which is nice to have! These gloves are made by "SAS" safety corporation which is a big industrial supply company! Thanks for the recommendation! They are a tad pricey at $19 for the box of 100 but they are a very high quality glove that you immediately notice and feel when you put them on! I like the bright orange! :-) These are standard inventory for all the Autozones! Mac
great video @Apex Detail. so, what would you suggest the best underlying base protection for BSD? sealants would be better option but are there some waxes that work great with it ??? and how often to use the BSD, just in case not to overdo it????
Thanks Brian, Could I possible Spray panel with KRAUSE & BECKER/PRESSURE WASHER then spray SONAX (BSD) using towel method, wanting to knock down grime first
Hello sir, i am using also this combo ...but i am confused. What are you using as base? The pns or the bsd? Because i am using first the pns and then the bsd .....it is the correct order?
@@marioskosmidhs9454 I wouldn't use it as clay lub since it is sticky. Better use simple shampoo or better waterless wash shampoo. Same price here in Germany BTW.
So Brian right now my SUV has been coated a few times with Mother's cmx ceramic coating. Applying BSD as a gloss enhancer would that affect or remove some of the protection that the cmx affords?? Thanks!
If it has to be applied with an applicator the 'detailer' or quick detailer aspect goes out of the window. Just bought 5 litres, will see how it goes as it's well reviewed everywhere
@@JWL-UK I have since used the product several times , it is EPIC. I have even applied when the vehicle is slightly wet and just dried the car , then used a full dry microfiber to give a quick buff over. The gloss levels and hydrophobicity are impressive
thomkirby I tried it on my gfs bmw while it was 80ish a couple weeks ago in Houston and the product evaporated as soon as I sprayed it on the panel. But that was in direct sun lol. Went into the garage and it was fine.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Here is a link to a well put together video on one of my hands on training sessions. Hopefully, I can get the shop done in a timely manner to do more of these. Who is interested?🙂
ua-cam.com/video/0bPm5uxtypY/v-deo.html
Fuck yeah!!
ME!
How can we find out when the next hands on training will be? Do you have a mailing list?
YES PLEASE😁
I would love but I’m too far from your office 😩
This channel is so valuable and underrated!!
agree
I have been saying that for a log time.
I agree
Welll.hope the vids help a bit. Thank you!
I just don't agree with underrated. I will put him in the top 5 of the best 10 of the best UA-cam detailers right now.
Advice from the German community: mix it 1:1 with distilled water. Same performance, little less endurance but better buff of.
Really we can use a 50% water and 50% product and the result is good? Good shine? Good reapalant ? More easy to buff ?
Thank you for reply :)
Yesss I've been waiting for this. Thanks for listening to your community! This is one of those products that really stood out to me. I applied this to my brother's truck that he never washes and regularly takes it offroad. It's still beading strong since I applied it on Christmas day.
It is very resilient. 💪
Applying the product to a microfibre pad is an excellent idea, reduces the amount used by not over-applying.....GREAT tip.
I second this! Hadn't even considered application with that method!
You also get more control with consistent application pressure for more complete and even coverage.. 👍👌✌
I would not recommend applying with an application pad on paint that isn't already very clean. The short knap and small contact area don't provide a lot of safety, so check your pads frequently..
I saw this first on Jimbo's Podcast but it took Brian to show the best way to apply it. Well done!
This BSD blew my mind when I first used it few years back in terms of gloss and durability. Used it purely as a drying aid and it never streaked. Only reason I stopped using it was because of the neverending flow of new products! Great reminder of what I have sitting dormant in my cupboard. Only thing I didn't really like was that it lacked slickness that other products had.
oooh, diluted for rinseless wash, great idea Brian, brilliant!
Allen Maestas I’ve been using it full strength as a drying aid and switched to Bead Maker, because the Sonax was streaking. I guess if I was using it properly, I wouldn’t have been have troubles with it. This is by far the best detailing channel on UA-cam
"Diluted 3:1" - does it work out to 25% product?
@@SK-1689 Seems like it yeah.
I appreciate you bringing us along for the ride during your busy day.
It is the only way I can do this on a regular basis.
I took your advice and applied it with an application pad. My car looks amazing!
Great video. This is the best detailing channel on UA-cam. I always learn something valuable here.
I appreciate the kind words...much more to come...stay tuned !!🙂
Probably the best video I've seen on BSD. Makes me want to get out there and get it on my car!
I use this on my wife's DD and it helped with its self cleaning abilities for keeping her car clean.
Appreciate the real world testing/opinions on products. Great channel !
It is the only way i can do it on a regular basis...bring you guys with me during the work day.
I'm a simple man. I see a video from Apex Detail and immediately click Like.
*Meguiar's last touch + BSD : 50/50 is so good for quick shine detailer and fast protection :)*
Hey Brian. I got very excited when I saw this video. I knew you would give an honest practical review of BSD. I also do painting in my shop, and not having silicone is a BIG tick for me. I also have diluted it with deionised water, and used it the way you just showed. I'm glad I'm doing the right thing, as it was just to extend the last bit I had in a bottle. Ticks all the boxes for me. A brilliant product.
Look forward to your next vid brother.
Kev
KP Daly Automotive UK
Much more to come...glad you are aboard brother!👍
Thanks for the rinseless wash tip! I'll be giving it a go during next week's wash.
Thanks Brian!! I just ordered like 12hrs ago and was looking for the best way to apply and get the best out of it. what a product! thanks again keep up the great content!!
You will really enjoy this.👍
I'm glad I found this channel for many reasons but in particular the spraying of the product into a wax applicator to use less. Had I not seen this I would've surely sprayed too much product, thanks Brian😃
My daily driver needed protection for the winter. I did the Sonax Polymer Net Shield, Spray & Seal and BSD combination recommended by Brian in another video. Gloss is just as good as a ceramic after the 7 day cure time but without the wait. Can't wait to see how it holds up to our winters.
Damn, that sounds like a tough combo. How did the products bonded together in your opinion ?
Also seeing your comment was posted 9 months ago, maybe you could give a quick review of how it held up ? Did it meet your expectations ?
Thank you !
I learn something new nearly every video
I am glad the vids help a bit.🙂
@@apexdetail85 I am using it love it Do u recommend to use sonax wax before it Or it is stand alone product ? Waiting for u r reply 😊
Brian, you're an alchemist my friend!! Just tried this and it works impeccably! May I suggest to others to use a super plush microfiber towel if the car is really dirty? It really augmented this stuff and safely sucked up the dirt without scratching. Thanks for the incredible ongoing tips!!!!!
500 gsm or higher.👍🙂
I've been using BSD for a few years now and really can't praise it enough , it's a product that gets used and doesn't end up sitting in the cupboard like some "fad" products , my wife's Landrover has BSD on it and I rate it better than the Fusso that my car has on .Great info as ever Brian .
BSD is a great topper for Fusso or as a drying aid over Fusso. I've been doing that for over 6 months and the car looks better now than on the day it was fully detailed back in September.
I learn something new in every vid...thanks B!!
:)
Thank you Brian and again well done.
I was eagerly waiting for a professional advice on this product because this one is widely available in my country.I wish i had bead maker here.
THANK YOU Brian for this one... Been using BSD for a while and diluting it down 3:1 has been allowing me to get a gallon out of a bottle using 32 oz. spray bottles, with about a little under half a bottle of full strength left. Again THANK YOU!🍻
Way to viscous at full strength.🙂
Just tried it as a drying aid diluted 3 : 1 brilliant results very easily thanks for the tip
Brian, Big thanks for all the great tips for product use as you always do in your video's. I always check in with your Apex channel for lots of helpful reviews.
Better than the other “ceramic” spray detailer 👍
I imagine this would work well on top of Poorboys black hole. Long lasting and easily maintained gloss, with no clearcoat reduction. Definetly something I’d like to try out.
It would be great to see a comparison test on Sonax BSD and Turtlewax seal n shine.
I really do like BSD and I think, as you highlighted when used as a drying aid or even when spread with a damp cloth it's the perfect all round QD. Using it this way I get no issues with application and the protection is 2+ months with great hydrophobicity.
My only issue is the rinseless wash method. For me I wouldn't go near anything other than light dust with BSD, even diluted like this. It just doesn't have enough lubricity for me and used on that amount of dirt I personally don't believe it would clean the paint safely. Only my thoughts Brian and not saying I am right.
Hey...I appreciate and look forward to your thoughts...mayb you are right. It has worked brilliantly here so far.🙂👍
I mix it 1 to 1 with CG V07 and it goes on easy, no streaking, incredible slickness and shine. Mixes homogeneously and hasn't separated in a several days since mixing a total of 16 oz.. have read also works well with Adam's QD. Wish I could post a photo because the results blew me away
HMMH...sounds interesting!🙂👍
@@apexdetail85 Interestingly, it does not play too well with Beadmaker according to Jon at Forensic Detailing. The successful list seems to be V7, Adams QD and Megs QD.
in korea .
bsd vs bsd+v07(50:50)
bsd win ...
Hmmm Brian, I never thought to cut this for drying aid purposes. I’ll give it a try!! Btw, that filling was impressive! Had no idea this could fill in so much. Definitely brought that panel up to life, even though I don’t protect without correcting, it’s still interesting and impressive.
I dont either...but for those who cant...it may help.
Loving to see some new content showcasing BSD's outstanding qualities. Sonax keeps it honest price-wise, even after so many years of being such a popular product. Unless the car is really dirty, I just power wash it and use BSD as a drying aid. The foundation sealant I have down is Fusso Coat and both products work super well together. I love seeing the beading and crazy sheeting when the car is in movement. It works great on glass/windshield and wheels too. Better still, you can buy it online in the UK for under £7 from Euro Car Parts. Great job, Brian!
JWL I use it over fusso as well. It performs better than megs hcw as a fusso topper.
Trying tu understand why BSD is recommended as Fusso topper, wouldnt be better just fusso? whats BSD ads to the mix? Thanks in advance!
@@hdmuzzillo it works as a sacrificial layer to prolong the life of Fusso Coat. They chemically match very well so you get the same water behaviour for longer. Bear in mind I don't use soap at all. I just spray APC (Surfex HD), rinse and use BSD diluted for my contact rinseless wash process for its cleaning ability. If use use the 2 bucket method, I'd suggest using BSD once very 2 or 3 months over Fusso Coat.
The real Bead Maker
The Sonax BSD and the Synthetic Spray Wax from Adbl are really the best spray sealants for us in Germany. Use it 1:1 and there is no different to use it pure
GREAT VIDEO 👍 Thanks a lot for idea 3:1 with BSD Sonax - IT'S WORKING 👏👍
Excellent tip on the microfiber pad👍👏...Great video on an absolutely superb product!!
I've just got hold of this. Can attest to a great shine and simply brilliant water beading.
This channel is the best.
Btw, you can pick up BSD here in the uk for around £8 so is real value for money when compared to something like Bead Maker at £12..
That is a steal!👍
Just got mine on eBay for £8.47 delivered to my door! 👍
Such a good product for those with massuive daily drivers like me (volvo 70). Any other methods take hours and nearly kill you.
I usually do my waterless clean on my ceramic-coated car with Meg's UQD but I ran out of it yesterday eveniing and used BSD. as I had some laying around. I does lubricate a lot less than UQD which means application was not the easiest. The "glide" feeling (when you let your fingers run over the uber-smooth, cleaned surface) once the job is a lot less present too. It is very viscous for sure., I didn't think about diluting it maybe that would have helped. Thanks for sharing some of your tips.
Hello
I use BSD since 3 Years.
I mixed it 50\50 with destilated water. Easy to use...the original spray bottle is bad...i use a kwazar 360 a a Foam-pad to apply an a Microfiber towel to buff off...
4 month in a german winter and the beading and sheeting is good, not perfect, since there..
Bad english, i know 😙😉
Hi. Looking to buy this. How long would you say it lasts with a wash every two weeks and using pH-neutral shampoo when washing? One month? Two? More?
@@fdu6
How many Kilometers or miles di you drive in one month?
The wether, is it hot where you are living?
I think round about 2-4 month is realistic.
In my car, 4500km in one year, parking in a garage, german weather. 6 month.
Absolutly awesome.
@@LastchaosFreakShow I hear you. Way too many variables to give a clear-cut answer. I just wanted to get an estimate. 4,5km a year is nothing!
@@fdu6
I know, not much km in a year.
2-3 month is realistic.
Test it. The price is not expensive.
You need not many sprays on the paint....
@@LastchaosFreakShow I will. Thanks brother
Another great video Brian. Have been using BSD for some time now and full agree with you comments. It does a very good job through the uk winter months. I also mix sometimes with Bouncers “Done and Dusted”😀. You might have seen John over on the FD channel has done a review video on mixing BSD with P&S bead maker...with mixed feelings on the results!,
I did....interesting mix!👍🙂
2 questions :
1) Can it be topped over polymer based wax (not sealant or Carnauba wax) ?
2) Can it be topped with a silicon based shiner to get extra gloss without affecting water beading capabilities ?
⚠️ Many thanks for your amazing videos, and I have a question...
Can this product be applied as engine bay and underneath the car to protect it as well❓
I like your video. In the end i think you make waterless wash, not rinsless wash. In the dillution rate 3 to 1 with water would it better to add in 1 liter bottle spray and 20ml ONR or Ech2o for more lubrication?
Thank you for your time
Can I put sonax bsd on ceramic coated car for extra gloss. My concern is bsd does not contain sio2.
Outstanding job 👍 as always Brian
I would be very intrested in a video with the last topic in this one.
About coating and how to treat it afterwards.
And maybe a video on Maguire's products.
Thank you also for this video very helpful and very Interesting 😊
Can I and should I put Sonax BSD on top of Collinite 845?
Great product and great tips on using it. Thanks for sharing
should we apply it after wax polishing?
Hello,
Can I use Sonax Brilliant Shine Detailer on engine bay and undercarriage...
"I know that there are other products for such areas, but is it good to have Sonax Brilliant Shine Detailer"
God damn, I’ve just ordered the Geyon Wet Coat as per one of your recommendation video and now you give me that tips ?? LOL Now I have to buy this Sonax product to test it out on another familly car.
Dont go crazy and start hoarding these products like I do. Just get what is needed. 👍
Apex Detail Yeah that’s what I’m gonna do, I’ve just spend more than 200$ of different product last week to start it up, already have a rotary polisher, electric pressure washer and gaz pressure washer and a few stuff bought last year. A good start I thing
Hi which product sealant or wax would attract least dust in hot climates
Can you use it with a microfiber block like a ceramic coating microfiber shape block?
Just quick question, if you read it.. wondering never saw anyone puting it on glass. Is it posibble to use on Glass after buffing to be clear and protection?
You absolutely can! I've been doing for years.
@@JWL-UK and you dont have marks from puting it on? After buffing
@@frco19 not at all. I always use a lightly damp microfibre applicator or cloth though to get it on then buff with a dry towel.
oK, it's REALLY GOOD stuff with hydrophobic effect 👍
can we apply BSD on a ceramic coated car?
GREAT video, Brian!!!
Can it be used for windows or only for painted parts...
Po svemu plastika, gume, staklo itd.
@@valiantone6937 није ми пало на памет за стакла да га користим, али пробаћу 🙂
Nice presentation.
A query , what is the time interval between first and second coating for sonax brilliant shine detailer ?
Wonderful tips!!! Thank you !!! God bless you !!!
I am just happy to help a bit. Thank you!
@@apexdetail85 Brian! Great video demo of the Sonax BSD! I used the Sonax Spray and Seal on my next door neighbors silver Camry! I did a basic strip wash, no claying and applied the Sonax Spray and Seal and damn if it didn't get great beading and a really nice slick gloss on the Camry! I used my little "Metrovac blaster sidekick" and the water sheeted and blew off effortlessly in a very short time! I was really impressed with the Sonax Spray and Seal! I've heard that the Spray and Seal can last anywhere from 1-2 months and if you layer it everytime you wash it will obviously longer and extend the shine and gloss! What's your take on how the Sonax Spray and Seal stacks up against the BSD! :-)
Hey I went by autozone today and picked up a box of the "Astro Grip" 7mil nitrile gloves and they are a very high quality nitrile glove and have the texture surface which is nice to have! These gloves are made by "SAS" safety corporation which is a big industrial supply company! Thanks for the recommendation! They are a tad pricey at $19 for the box of 100 but they are a very high quality glove that you immediately notice and feel when you put them on! I like the bright orange! :-) These are standard inventory for all the Autozones!
Mac
@@macbaker8477 They are fantastic! Enjoy good friend!. Enjoy the IK Foamer!!
@@apexdetail85 Brian I should have the IK foamer by Wednesday or Thursday of next week! :-)
I'm a big fan of this product, some great tips on using it.
I am to...Cheers!
Great video, I'm sold, subscribed !
The best content for detailing.
Forensic Detailing Channel is better
Sonax BSD can be used as a topper on what kind of coatings? Can it be used on graphene coat. I beleive Sonax BSD has SIO2
great video @Apex Detail. so, what would you suggest the best underlying base protection for BSD? sealants would be better option but are there some waxes that work great with it ???
and how often to use the BSD, just in case not to overdo it????
Sonax Polymer Net Shield would be your base layer/sealant. BSD would be used to maintain it, as they have the same chemistry and amazing hydrophobics.
How does this compare to the sonax fast wax? Are they the same thing, can you use both, or just one??? I m confused. Which is better?
Thanks Brian, Could I possible Spray panel with KRAUSE & BECKER/PRESSURE WASHER then spray SONAX (BSD) using towel method, wanting to knock down grime first
Sure could!🙂👍
Whats The best Dilution for Sonax BSD for no streaking with till top performance?
1:1
How does Sonax BSD compare to CarPro Reload in terms of durability, gloss and slickness?
Self cleaning ? Car stay cleaner for longer ? Prevent dust?
can you put on glass and plastics?
Great tips! Much appreciated!
Can i put this down and then follow it up with a spray wax over top of it?
BSD + PNS = Dream team
Hello sir, i am using also this combo ...but i am confused. What are you using as base? The pns or the bsd? Because i am using first the pns and then the bsd .....it is the correct order?
@@marioskosmidhs9454 Your order is correct.
@@armindoerr thanks sir. Here in Greece i can find BSD for 10euros(8usd) for 750ml(22oz) or......35 euros for 5lt(150+oz)
Have you ever tried bsd as clay lub? Thanks again
@@marioskosmidhs9454 I wouldn't use it as clay lub since it is sticky. Better use simple shampoo or better waterless wash shampoo. Same price here in Germany BTW.
What will hapened if you spray it and just wash it down with powerwasher?
So Brian right now my SUV has been coated a few times with Mother's cmx ceramic coating. Applying BSD as a gloss enhancer would that affect or remove some of the protection that the cmx affords?? Thanks!
If we use it as a drying aid, we must wipe again with a dry towel?
yes of course.
@@FandyMSaputra I don't mean the drying towel. I mean once afterwards
I have both (Sonax BSD and Sonax Spray&Seal). Is it possible to use them together? If so in what order?
Does this replace a wax? Or is a wax still needed beneath it?
If it has to be applied with an applicator the 'detailer' or quick detailer aspect goes out of the window. Just bought 5 litres, will see how it goes as it's well reviewed everywhere
A lightly damp MF towel will work fine.
@@JWL-UK I have since used the product several times , it is EPIC. I have even applied when the vehicle is slightly wet and just dried the car , then used a full dry microfiber to give a quick buff over. The gloss levels and hydrophobicity are impressive
Glad you went over the issues. How hot is too much for application out of direct sunlight? Thinking of my Texas summers and humidity.
thomkirby I tried it on my gfs bmw while it was 80ish a couple weeks ago in Houston and the product evaporated as soon as I sprayed it on the panel. But that was in direct sun lol. Went into the garage and it was fine.
@@salomeroman1114 Thanks might try it later when ready to purchase next product.
I will do a video on applying products...and paint correction in the sun for that matter. Stay tuned.
Apex Detail oh man Brian it’s like you read my mind lol. The other day I was searching for a video just like that. 🙌🏼🙏🏼
Thank you so much, I really needed this video.
Hope it helps a bit.
So just use reload on ceramic coating?
On CarPro coatings....Premier on IGL, CanCoat on Gyeon, OverCoat on Kamikaze....and so on.
Hi Brian, 9 minutes onwards: by coating do you mean only ceramic coating or anything sealant & wax? Thanks
As a topper for the Soft99 Fusso Coat, would you use the Speed & Barrier or this Sonax Brilliant Shine Detailer?
Fantastic video! Do you mix this with normal water or distilled water? And how long would the protection last on a 3:1?
How would you say it compares with CarPro Elixir?
Would you recommend this or meguiars ceramic wax over the top of powerlock?
Great video ! Can you clarify when you say diluted 3:1, is that 3 parts BSD to 1 part water ? Or other way round ?
It is 3 parts water and 1 part BSD
Whenever I'm putting on a polish, I like to give my pad a squirt or 2 here and there. 💪
Does this have the biggest jump in gloss you've seen from a spray?
Hy Brian, can this be used as a clay lube? And if can, at wath dilution? Thanks!
great product review video again buddy. 🍻🍻
can u use it on glass?