Foiling with embossing folders?
Вставка
- Опубліковано 13 січ 2020
- Hobby Lobby Glimmer machine : www.hobbylobby.com/Scrapbook-...
(On sale for $74.99 as of recording of this video)
Spellbinders Glimmer Amazon link: amzn.to/2FGKuV5
Darice Heart Embossing folder: amzn.to/2uBgkQG
Spellbinders Love hot foil stamp: amzn.to/39Y85P3
GoPress Hot Foils: scrapbookingmadesimple.com/fr...
Scrapbook.com: www.scrapbook.com/store/produ...
I love the fact that u experiment and then share w/us. I also like the fact that u get to the point and don’t goof off. Thank u.
Thank you Yolanda, I try to be as real life as I can so you can see you are NOT alone.
Totally agree!
Thank you Nancy , all your hard work saves me time, foil and patience . I’m very very appreciative . You also give me encouragement to get my foil machine back out as it very nearly went through the window when i tried it . Thank you again and I have subscribed so that I can get some more very useful help
Foiling your embossing folders besides thinking outside the box also expands the use the folders. Who knew! Obviously you did Nancy😊👏👏👏
I might be totally wrong because I don’t foil, however I still use my Big Shot for my die cutting AND embossing. What I learned with my embossing, especially with a Darice folder, was to use a smaller paper shim folded in thirds, that puts the pressure in the middle of the sandwich. Maybe more pressure in the middle is the ticket. I find your videos entertaining and informative! Thx! 😊
So interesting. What a delicate balance there is in the embossing folder foiling world. Great expiimentatiin. Tfs
Yayyyyy, more foiling 🤩 omg foiling with embossing folders. I love it! !💖💖
Thanks for your dedication to figure this out for us!
One hint that I was always given was to roll through the Big Kick VERY SLOWLY.
I love that you experiment and share with us! Thank you!
You are so experienced and I love the experimenting for us....
You are soooooo awesome! I appreciate all.of your experiments that you share with us! Thanks so much!!
I don’t have manual die cutting machine, but I still watch anyway! Would love to see embossing folders in a CC FoilPress but definitely not recommended I’m sure. Thin ones could work I think. Thanks Nancy!
I just saw a video on embossing folders using the Glimmer and it just popped up in my feed, Pia Krogh Larsen. She used a lot of pressure using a candle holder and all kinds of jazz, but she got a really good result. I couldn't remember if you tried this, and of course you did. I don't know if you saw any of her stuff, I have never heard of her but it was interesting.
Thank you Nancy I am glad to see this tutorial.. I have considering getting this foiling system... I was watching a video from creative nation last night where ThermoWeb is coming out with a paste to foil without heat
Thank you for all your testing.
Great experimenting! (cut the overfoiling areas into strips and use them on the edge of a card. Still pretty!)
Thanks for sharing your test and ideas.
Always sooo informative!! Tfs!!
I am going out to get me a glimmer machine today.. Thank you very much. Thought I had to go with Gemini....yay. Love you
Lots of great tips, thank you!
You have spent a whole lot more time on trying to get this Spellbinder machine to work than I would. It is much appreciated though. I think I will stick with my laminater even though I have not tried it yet. Just got my foils from the retirement sale yesterday.
Connie, agreed! Minc/ Laminator foiling is my #1 favorite way of foiling.
A very helpful video. Thank you.
Try cutting your foil to the size of your cardstock and you will have much less over foiling. Trimming the corners some also helps.
Okay just ordered from amazon.. Getting tomorrow yay
Oh Nancy, don't tell me about advantages of the glimmer press.....I'm going to need it, lol. Blessings
With the embossing folder, on my Gopress I leave it longer to heat up but don’t put too much shim in order to only have the raised parts of the embossing folder to be foiled. Now I only work with Couture créations foils.
I haven't tried them yet, but I have some and I will see if they are any better
Anne-Marie Gaglio Absolutely. I sold my Glimmer Press after getting the Go Press n Foil. I like Couture Creations foils better too..and now that I’ve bought their Go Power & Emboss electronic die cutter I’m foiling practically everything...even from Stamps.
Annette Po I am happy to learn that it is possible to foil without too much issues with it and even better with their electric cutting machine. But it is a company difficult to find in my country. My Gopress is a US one so had to buy a power transformer. I still have to guess sometimes on my shims.
Anne-Marie Gaglio that’s a shame because they make really good quality products. Perhaps you could start asking your local craft stores to begin stocking the products. I know how frustrating that is. I’m from Australia and we have the same problem with some products.
Annette Po scrapbooking made simple carries the go press and foil!!
i used this technique. saw in another video , i love it .
I wonder how it would work out if you emboss the paper before you foil, hmmmm lol
I have that big kick! I got it as a present around five years ago! Last year my son gave me the sizzix plus machine and it is so big,I have place to put it!
You may want to try using the metal adaptor plate. It provides more support especially in the middle.
Very cool
I ordered a machine... I've been going to ordered one for a long time..
I watched a video where the gal foiled with a die and then turned the die over and cut it out.. Very cool
Very pretty! Hmmm. Looks like the die cut machine is pressing hard on the outside edges. Maybe cut/limit the number of shims down to 2 on outside and/or to just the middle
good idea!
@@NancyStamps I thought the same thing. You kept tinkering with the foil and the heat and paper shims, but it seems your rollers are worn in the middle, which makes sense since that is where we tend to place dies for cutting. The edges have more pressure because they haven't been worn down as much. If you had another machine to try it in... a friend's perhaps, especially a newer machine, I think it would work right without even swimming. Love this idea, and *so* appreciate your tests and trials! I'm waiting for you to test all the machines and all the foils so I can get the one with less fussing! LOL Though, every individual die cut machine adds some variation, and I have an eBosser so I'm not likely to find a video of anyone trying foiling with it! Love my little eBosser though... small footprint but it can take 8.5 x 11" paper. I have a couple dozen letter size embossing folders, plus I love that I can run a bunch of dies with one pass. I'll stay tuned for more experiments in the meantime!
Those others will still make really good backgrounds. What if you heated the paper too, like let it sit on there a little before taking off and rolling it
yes, I salvaged them and they came out good. Will keep posing videos and experimenting with it. Stay Tuned!
Look what I came across. 🙂 I do like the distressed look of some of the gold on black. The orange presents on white had one side that wasn't bad, but I think you weren't as much of a foiling snob back then. Lol. Your nails are gorgeous in this video! Are they your actual nails, or just a different way you had them done? They look thinner than the way the do now. Anyway, very very pretty! See you back in the future. 😁
I wonder what would happen if you heat your entire sandwich (including the foil and paper to be foiled) at the same time and run the sandwich through the Big Kick without opening it.
Also what happens if you change your sandwich to heat platform, paper, foil, embossing folder, shims, and pad?
I have a Go, Press & Foil machine and these sandwich variations work well for me. I also use a metal shim, paper, foil, 3- layered(& glued) die cut shape, Spellbinders embossing rubber pad, flip the lid down, then heat the sandwich before running it through my Big Shot. (Because my Big Shot is fairly new sometimes I don't need any paper shims, sometimes I use one or two.)
tried that off camera too, just need to tweak it some more.
One tip I seen from other crafters is the paper you use to foil makes all the difference. For example using the reverse of photo paper works well. Many thanks for the tip about the Go Press and Foil works best with a Gemini Jnr as I was thinking of buying one but have the big Gemini.
Love foiling, and embossing folders. But I don't a heat foiling machine. So it's out for me.🙁 thanks for sharing anyway.
There is a saying in the knitting community: " You never have too much yarn in your stash if you can stand in your home or room and be 10 feet away from any of your yarn" . It might be said of foil in your home and fast becoming mine. :))) I wonder how that coated black card stock would work?
I'll try it and let you know.
@@NancyStamps that green embossing pad is an Anna Griffin pad. It's way thicker than the tan spellbinders embossing pad.
I love watching your foiling videos. I keep saying I'm gonna get my foil press out and go to work...I just keep getting sidetracked! Lol
@@maxineb1969 good to know, I will see if I have one and try it.
I just got the big Gemini machine. You mention people saying there is too much pressure from it and people complain. COuldnt you use a thinner plate on the outside of the sandwich to allow for less pressure? Thanks
good evening Nancy not sure if you have already but have you tried using an embossing folder with acitate ? xx
I don't think I've seen anyone else use this technique, pretty cool. On an entirely different topic, what is the brand and color of your nail polish? It's gorgeous!
Lol, thanks Donna. I have no idea. I go to the nail salon and just pick one.
@@NancyStamps well, you're a good picker =) I'm going to look outside my coral/pink box for glittery purple.
Hi Nancy, Thank you for sharing a really fab crafty hot foiling tutorial I really did appreciate all your hard work and experimenting 👍 Nancy, If u used the metal shim first then put the embossing folder down would it then be possible to use the Gemini foil press ? love to u and all 👍💞
no, too thick to pur through the gemini foil press with the foil platform...and Crafter's companion would definitely not allow that. lol
@@NancyStamps Hi Nancy, Thank you so much for taking the time to read and reply back to me as I know u are a very busy mam I really did appreciate that and all your help as always ☺️👍 Lin x
These are beautiful! Is there a way to foil folders without a gemini ?
Laminator? But obviously that dosnt work with an embossing folder :)
@nancy stamps -- what weight of paper are you using for the paper shims?
The difference between the sizzix big kick and big shot is where you can buy them. The big kick is sold at chain stores like joann and michaels while the big shot id at your “mom & pops”
Hi @Nancy is there a reason you wouldnt put your Cardstock and foil in with the folder and shims to heat all through from the start?
I wasn't trying to emboss it. Just foil with it.
can you use the big shot with the glimmer foil machine?
I received the Gemini Foil Press as a Christmas present. I do not have the Gemini Jr but I do have the bigger Gemini. I did have to order the extender plate. I have had nothing but trouble with it. Its gotten stuck in the machine twice, I mean really stuck. And I followed the sandwich that was shown on a youtube video. The only difference was I switched the two plates around (small plate to extender plate). I still can't get it to be right. I won't buy a Gemini Jr, I have so much stuff now. Do you prefer the Spellbinders? Seems like it does a little more. Thoughts anyone?
So is there a reason the embossing folder doesn't work in the gemini foil press? Will it not fit? Warranty issue?
I'm also wondering why cc doesn't want the foil press used in a manual machine... Why would it be an issue...?
Embossing folders will wor for embossing, but not with the FoilPress. CC will void your warranty if you try to use an embossing folders with the FoilPress.
Can you do the same thing with embossing folders on the Gemini foil system?
Sadly, no
Woh
Have you tried the 3D embossing folders? They may not need shims?
after you foil could yoe run it through you`re big shot befor you take the foil of of card stock, Helen
So why couldn't u just emboss it first & then foil it?
Can I do this with Gemini foilpress?
No, Crafter's Companion does not recommend using embossing folders with the Gemini Foil Press.
We pay for Amazon Prime and avoid shipping fees for the rest of the year. It really works out when you consider what the scrapbooking online stores charge for shipping. I like being able to order an inexpensive item without another shipping fee. We always get our moneys worth.
What's a shim please 🤔
Thick pieces of cardstock to thicken your sandwich.
I find that if I foil too long, that is when I get over foiling.
I was disappointed that you can’t use the embossing folder on the Gemini foiling machine. Why? I love the idea of using embossing folder.
you can emboss, you just can't heat it with the foiling platform and try to foil with it.
Hi Nancy, I like all your tutorials about foiling, what about Gemini foil press machine, will foil with embossing folders??? what is better Gemini foil press or Glimmer machine??? thank you
in my opinion the Gemini Foil Press is better, but it is limited and can not do the embossing folders. Plus Crafter's companion is very strict on what you use with the Gemini Foil Press or they will void your warranty
Thank you Nancy for reply, :) I saw one tutorial where they used embossing folder with the Gemini foilpress, I am little in confuse, as I want to change my GO press machine, I have Gemini cut machine original, I have SB platinum machine, so hard to choose from CC foilpress & Glimmer foil system
Why dont you close the embossing folder?
I'm looking for the foiling effect, not necessarily embossing. Plus it tends to over foil even more. I'll experiment some more and show more videos with it.
...so technically I can turn my easy press over and use the plate to carefully heat my embossing folder??
Oh I don't know, that might work