Not sure if you guys gives a shit but if you are stoned like me atm you can watch all the latest movies on instaflixxer. I've been binge watching with my brother for the last few weeks xD
YES YES YES and another Yes Sir!! Superb Mod and What I’m after on my Steeldive as you know but it looks like I’m going to need a Proxima MM Homage😮Plus I love the Gold Gilted one you yourself have with this mod. Absolutely Superb Video which covers all bases👏👏👏👏👏👍⌚️ Well Done🙏
I just bought the Fifty Four Homage to the MM300, I'm very impressed with it for $240, sapphire, ceramic, St2130 high beat movement.+9 sec .02 beat error, bracelet is good, lume is good, bezel is only 60 clicks, but I believe the original MM is only 60 clicks.
Thank you for showing us, great vid. Only thing is a little down side to me: you went with the old steeldive chapterring, wich we don't have laying around. For modding perspectives it was nicer if you'd showed how to fit the original one(file the feet down?) or use a common available part for it. Other than that, always love your content!
Yeh unfortunately it's not the feet you're filing down, they're slots. What I mean is that there is a Hell of a lot of material to file down and it isn't sustainable. I'm trying to figure out alternatives as I want to be able to do this mod for people. Hopefully I have a better solution!
@@just4themodderz37 I switched dials on one of these proxima mm300s about three months ago and ran into the same chapter ring issue; I ended up sanding down a standard SKX chapter ring with a Dremel in order to make it thin enough to fix. Ended up being so thin that it's practically just a plastic washer/gasket, and markings hardly visible! If I were doing it again I'd probably just use a plastic gasket from the DIY shop instead,
Thank you for your great videos. I am trying to dial modification on my Proxima blue steel MM300 with ceramic bezel and pt5000. Do you have alternative for the chapter ring problem? Does Aliexpress or some other shops have chapter ring that fits well??
So you pulled the chapter ring from a steel dive watch? I didnt understand that part? what was the issue? There was no notches in the Seiko dial for the chapter ring?
I ordered a Seiko SbDC 012 dial So with that said , is the Proxima chapter ring going to fit with the seiko dial ? Or do I need to find a replacement ??
If the Proxima chapter ring were made of brass is would not be silver coloured. Split stem design, nice. Do the dial feet of Seiko fit the PT5000 ? if so, I'd sooner replace the PT5000 with the new Swiss mvt which has 68 hours of power reserve and is better made. I don't see the point in the dial mod really, the Proxima dial looked fine. Cheers.
I have good news for people with an Heimdallr MM300 to mod or change dial : this watch have the same stem system of the Proxima MM300 . Have a good mod guys !
I really like your channel. It really helped me a lot. But, from the way you put back the glass and the frame, without being pressed, is it strong enough to hold water not to enter the case? Thank u in advance.
Great vid mate. I have a guilt version on its way and plan to do this mod. Would you suggest gettion anew chapter ring with the new dial from Dial Maker? P.S what model aviator id that on your wrist? It's a beast!!
That mod turned out fantastic! Night and day the difference between this and the Steeldive for modding. Great video. I think another UA-camr the timekeeper has found that seiko monster dials fit these sort of cases perfectly with their integrated chapter rings? I saw you wearing the Fifty Five 62 Mas homage 👍. Looking forward to your thoughts 💭....
Smashed it out the park mate, well done
Love that dial, good stuff. Thanks of rshowing the difference between the steeldive and the proxima too!
Not sure if you guys gives a shit but if you are stoned like me atm you can watch all the latest movies on instaflixxer. I've been binge watching with my brother for the last few weeks xD
@Ahmir Samson Yea, I've been using instaflixxer for since december myself =)
YES YES YES and another Yes Sir!!
Superb Mod and What I’m after on my Steeldive as you know but it looks like I’m going to need a Proxima MM Homage😮Plus I love the Gold Gilted one you yourself have with this mod.
Absolutely Superb Video which covers all bases👏👏👏👏👏👍⌚️
Well Done🙏
Thank you Neilo!
@@just4themodderz37 superb Video Sir and more than Welcome as it’s Us who thank you for the time taken etc for you to do these videos👍👏👏👏
I just bought the Fifty Four Homage to the MM300, I'm very impressed with it for $240, sapphire, ceramic, St2130 high beat movement.+9 sec .02 beat error, bracelet is good, lume is good, bezel is only 60 clicks, but I believe the original MM is only 60 clicks.
Interesting, i was wondering how that stacks up against, lets say the Proxima mm300
Thank you for showing us, great vid. Only thing is a little down side to me: you went with the old steeldive chapterring, wich we don't have laying around. For modding perspectives it was nicer if you'd showed how to fit the original one(file the feet down?) or use a common available part for it. Other than that, always love your content!
Yeh unfortunately it's not the feet you're filing down, they're slots. What I mean is that there is a Hell of a lot of material to file down and it isn't sustainable. I'm trying to figure out alternatives as I want to be able to do this mod for people. Hopefully I have a better solution!
@@just4themodderz37 thank you for responding! Please keep us updated on this!
@@just4themodderz37 I switched dials on one of these proxima mm300s about three months ago and ran into the same chapter ring issue; I ended up sanding down a standard SKX chapter ring with a Dremel in order to make it thin enough to fix. Ended up being so thin that it's practically just a plastic washer/gasket, and markings hardly visible! If I were doing it again I'd probably just use a plastic gasket from the DIY shop instead,
Where do recommend to find an SBDX012 dial ? That’s the one I need
Thank you for your great videos. I am trying to dial modification on my Proxima blue steel MM300 with ceramic bezel and pt5000. Do you have alternative for the chapter ring problem? Does Aliexpress or some other shops have chapter ring that fits well??
So you pulled the chapter ring from a steel dive watch? I didnt understand that part? what was the issue? There was no notches in the Seiko dial for the chapter ring?
It doesn't look like a Seiko, the alignment is perfect.
Haha
Thanks for the video
Hi! Can you help me how big is the diameter of the new dial? 28.5mm? And the chapter ring is same? Thanks for the answers.
Great job mate 👌. Do you know if any AM bezel inserts will fit these ?
I ordered a Seiko SbDC 012 dial So with that said , is the Proxima chapter ring going to fit with the seiko dial ? Or do I need to find a replacement ??
Did you say you have found ratcheting clasps on AliExpress ? Can you link to it please
Hello! I would like to ask where you ordered the Seiko dial for the watch? Can I ask you for a link?
If the Proxima chapter ring were made of brass is would not be silver coloured. Split stem design, nice. Do the dial feet of Seiko fit the PT5000 ?
if so, I'd sooner replace the PT5000 with the new Swiss mvt which has 68 hours of power reserve and is better made. I don't see the point in the dial mod really, the Proxima dial looked fine. Cheers.
Great stuff! Question about my movement, had it all back together then my movement quit working. Any suggestions? Thank you
Try again to assemble, maybe the rotor plate or the section underneath it. How far did you strip it down?
I have good news for people with an Heimdallr MM300 to mod or change dial : this watch have the same stem system of the Proxima MM300 . Have a good mod guys !
Seiko diar & seiko mm300 band link?
Where did u buy the dial?
Great video 🙂 Which movement is in this watch?
Hello. I have a question. How did you fix the chapterring?
Its in the video, I used a steeldive sd1968 chapter ring
@@just4themodderz37
Can I fix the new dial at 12, 6, and there's no place to put it in the direction? I can't fix the chapterrings. ㅜㅜ
I really like your channel. It really helped me a lot. But, from the way you put back the glass and the frame, without being pressed, is it strong enough to hold water not to enter the case? Thank u in advance.
The crystal is screwed in
Great vid mate. I have a guilt version on its way and plan to do this mod. Would you suggest gettion anew chapter ring with the new dial from Dial Maker?
P.S what model aviator id that on your wrist? It's a beast!!
If they supply a chapter ring for that dial i would suggest get it. I don't think I'm wearing an aviator, i think its the 54 watch 62mas
@@just4themodderz37 Sorry got the vids mixed up. The Seiko you were wearing in the 54 Watch unboxing.
Is there a link for this dial?
That mod turned out fantastic! Night and day the difference between this and the Steeldive for modding. Great video. I think another UA-camr the timekeeper has found that seiko monster dials fit these sort of cases perfectly with their integrated chapter rings?
I saw you wearing the Fifty Five 62 Mas homage 👍. Looking forward to your thoughts 💭....
Haha mate you have a sharp eye, yes just wearing it and seeing how it looks, I will be reviewing it soon enough!
Yay, lets turn a homage into a fake knock off.
Woooo!!!! Watches!!!!!
How much pressure should you apply removing the bezel?🥲 I use all strength i have, still can't pop it out..😢