I love your organizers very simple design and effective and everyone loves magnets, but I work out of a service truck that have a steel body bed but all my drawers, shelf’s, and service body doors are aluminum so magnets aren’t going to help me in my situation, if you had a way to bolt, screw, or pop rivet your organizers down then they would be bad a$$ and help out some field mechanics because we have utilize every square inch of space in our trucks but also keep in mind of the weight of everything in our trucks. You made my day when you were talking about the 2 inch wrench organizers, big wrench needs organization too
I would really like to make some stuff for service trucks but I don’t really have a grasp into what are common tools and how they best fit. Are there drawers? Shelves? If I had one to study I could potentially design some stuff for service trucks
This is my very 1st time here, and you, sir, are a genius!! I've got to say, I'm so impressed by how innovative and creative your products are!! I love how many colors there are to choose from, and some of these products are the 1st of their kind. Very, very well done bro!! 👏 The astro organizer is pure genius!! The hanging ratchet organizer is great too! I hope you keep griwing your product line and keep coming out with new storage options. Great job man! I'd love to see a launch version of the D1 kickstand with dongle holder because my launch doesn't have a kickstand. I always thought it was stupid that any scan tool didnt have a kickstand or a spot to store the dongle. You should make a dongle holder for every scan tool too. I just used velcro with sticky tape. I also really like the socket organizer because you can make it as long as you want. Also, not sure if you're able to do this, but you should make some dope decals.
Questions/suggestions Do the low profile ratchet holders have magnets in them? Does the anvil touch the bottom of the drawer? The reason I ask is that I currently store my ratchets in a low profile drawer, but anvil up, and my larger 1/2" ones barely clear when opening and closing the drawer. Do you have, or will you have, any of the modular wrench holders that are xxl so they can hold the thick wrenches from Wright that are over 1-1/4"/32mm? Their beams start at 1"wide and 3/4" thick, and get wider and thicker as the wrench gets bigger, up to 1-3/8" wide by 1-1/8" thick on the 2-3/4" wrench. See this page for reference looking at columns F and G. They only have numbers once the size exceeds 1-1/4 and 32mm as all of them through that size have normal style beams. Are the magnets strong enough that they hold the tools in the holders, somewhat? Especially on the socket holders? Planning on making any wrench holders with a slope for S wrenches?
Anything coming with the rachet head showing in vertical.I want to see the brand displayed. I’ve been looking for something to put on my garage bench. I just got the harbor freight socket holder too 🤣
I love all the color options! For your socket rails, could you make an option with long pegs so you can store the sockets with the open end down? I'm running into a problem with my big sockets, they don't make normal socket trays big enough and I don't want half of my sockets to be open side down and the other half open side up. Also is there any way you could find a combat green color? Thanks!
Are the magnets in the base of the socket organizers strong enough to hold everything in place through a drawer liner? In your video I see you have it on top of a drawer liner but that's on top of your cart. Would like to know if they hold strong with a drawer opening/closing.
Fwiw, as someone who also has a 3d printer, i'd probably be down to buy some of the models (for personal use, if available that way). Just wouldnt be able to justify buying a 3d printed part when I could be printing it myself.
I like the socket rail. What would be cool is to make the post long so they come up to about flush with the socket and have sizes engraved on the end of it so you can quickly see that when you open a drawer. That ratchet hanger is an awesome idea!
It’s a great idea but extremely hard to execute on a small scale by one guy and 2 printers. It’s also hard to print tall skinny objects reliable which would be another problem to overcome
@@Collindraker Ahh yeah i can see that breaking maybe too. Cool stuff either way! I looked around for thin hex shaped inserts with sizes embossed on them that would fit snug into the socket and just stayed there. That would be slick being able to see the sizes quickly from the top looking into the socket..
Do you have a socket organizer that will allow the sockets to lay down? I do tool and die and my Kennedy box the drawer my sockets are in is thin and I have to have them layed down
@@Collindraker if so that'd be awesome. But I don't want you to spend the time designing and making them just for me. Idk if you can do a poll or find some way to ask your viewers and see how many people would want one or something but if others do then it may be worth it for you
I always have a difficult time organizing my extensions so I love that design. All of your wrench organizers are too thick and too big. The wrench organizers take too much space, I have about 300 hundred differnt wrenches so most mechanics nee will sacrifice organization for space.I think the colors you chose for you organizers are the best though.(the black wrench organizers are the best) Your plier organizers that are modular are great! Ratchet organizers are spot on, love the variety and colors! You sold me on the tool cart ratchet organizers!I am also sold on you socket organizers because you can stack them. I loved this video!
Thanks for the input! What exactly would you need to get your wrenches organized? My vertical ones are pretty damn compact. I think I may make a video on all the styles and the amount of space they take up for reference for techs who are thinking about getting some. I’d love other professionals opinions though. I have probably made over 10 variations of these wrench organizers and I’ll make more if I have too.
@@Collindraker to get my wrenches organized, I personally need something close to the thickness of paper but will still keep the wrenches organized. The vertical modular ones are the best but they still take up to much room. I got over 300 different wrenches and one wrench drawer. Some tool boxes are extremely expensive so we can’t waste space. I want to send a picture of my wrench drawer to show you so you can see. I’m sold on everything else! This a great idea and I hope everything goes well!
So many great designs! Excellent work. Thanks for sharing!
* looks inside toolbox in complete disarray. *
Yeah I'll be buying some of these. Thanks my guy.
Thanks for looking out! Hope my stuff helps.
I thank you for sharing this video, just bought your ratchet organizer that they are great
I love your organizers very simple design and effective and everyone loves magnets, but I work out of a service truck that have a steel body bed but all my drawers, shelf’s, and service body doors are aluminum so magnets aren’t going to help me in my situation, if you had a way to bolt, screw, or pop rivet your organizers down then they would be bad a$$ and help out some field mechanics because we have utilize every square inch of space in our trucks but also keep in mind of the weight of everything in our trucks. You made my day when you were talking about the 2 inch wrench organizers, big wrench needs organization too
I would really like to make some stuff for service trucks but I don’t really have a grasp into what are common tools and how they best fit. Are there drawers? Shelves? If I had one to study I could potentially design some stuff for service trucks
when i was in a service struck drawers i wanted magnetic i rivited down a thin sheet metal down
This is my very 1st time here, and you, sir, are a genius!! I've got to say, I'm so impressed by how innovative and creative your products are!! I love how many colors there are to choose from, and some of these products are the 1st of their kind. Very, very well done bro!! 👏 The astro organizer is pure genius!! The hanging ratchet organizer is great too! I hope you keep griwing your product line and keep coming out with new storage options. Great job man! I'd love to see a launch version of the D1 kickstand with dongle holder because my launch doesn't have a kickstand. I always thought it was stupid that any scan tool didnt have a kickstand or a spot to store the dongle. You should make a dongle holder for every scan tool too. I just used velcro with sticky tape. I also really like the socket organizer because you can make it as long as you want. Also, not sure if you're able to do this, but you should make some dope decals.
Questions/suggestions
Do the low profile ratchet holders have magnets in them? Does the anvil touch the bottom of the drawer?
The reason I ask is that I currently store my ratchets in a low profile drawer, but anvil up, and my larger 1/2" ones barely clear when opening and closing the drawer.
Do you have, or will you have, any of the modular wrench holders that are xxl so they can hold the thick wrenches from Wright that are over 1-1/4"/32mm? Their beams start at 1"wide and 3/4" thick, and get wider and thicker as the wrench gets bigger, up to 1-3/8" wide by 1-1/8" thick on the 2-3/4" wrench.
See this page for reference looking at columns F and G. They only have numbers once the size exceeds 1-1/4 and 32mm as all of them through that size have normal style beams.
Are the magnets strong enough that they hold the tools in the holders, somewhat? Especially on the socket holders?
Planning on making any wrench holders with a slope for S wrenches?
Anything coming with the rachet head showing in vertical.I want to see the brand displayed. I’ve been looking for something to put on my garage bench. I just got the harbor freight socket holder too 🤣
I have vertical ratchet organizers too.
@ I saw the wed site but they are side facing ,wanted to have the logo showing.
@ I guess I’m confused on what you want. What logo do you want showing?
I can’t wait to order a little bit of everything! The designs look great Collin keep grinding buddy!!
Thank you! The website is live now!
Those are some great designs. I really like the spring loaded plier rack.
I love all the color options! For your socket rails, could you make an option with long pegs so you can store the sockets with the open end down? I'm running into a problem with my big sockets, they don't make normal socket trays big enough and I don't want half of my sockets to be open side down and the other half open side up. Also is there any way you could find a combat green color? Thanks!
ill look into it!
I have your pole jack piece! Love it
Heck ya! Glad to hear it.
Are the magnets in the base of the socket organizers strong enough to hold everything in place through a drawer liner? In your video I see you have it on top of a drawer liner but that's on top of your cart. Would like to know if they hold strong with a drawer opening/closing.
I have a drawer full of axle not sockets on my rails. They don’t move.
@@Collindraker I'm going to reach out to you via your website. I'm going to order pretty much everything but have a socket rail request.
@ sounds good! I’ll keep an eye out
Good for you man. Looks like some fantastic designs. Ill likely pick up the ratchet and pliers.
Thanks for the support
Everything looks awesome👍👍 I’ll be looking out for them to be available. I’m for sure going to be buying some
Thanks for the support!
Fwiw, as someone who also has a 3d printer, i'd probably be down to buy some of the models (for personal use, if available that way). Just wouldnt be able to justify buying a 3d printed part when I could be printing it myself.
I don’t think I’ll be selling the STL’s. Sorry.
I like the socket rail. What would be cool is to make the post long so they come up to about flush with the socket and have sizes engraved on the end of it so you can quickly see that when you open a drawer. That ratchet hanger is an awesome idea!
It’s a great idea but extremely hard to execute on a small scale by one guy and 2 printers. It’s also hard to print tall skinny objects reliable which would be another problem to overcome
@@Collindraker Ahh yeah i can see that breaking maybe too. Cool stuff either way! I looked around for thin hex shaped inserts with sizes embossed on them that would fit snug into the socket and just stayed there. That would be slick being able to see the sizes quickly from the top looking into the socket..
Really like the hanging ratchet holders, can’t wait to order some
Website should be up in a week or so! Stay tuned on this channel for info
Do you have a socket organizer that will allow the sockets to lay down? I do tool and die and my Kennedy box the drawer my sockets are in is thin and I have to have them layed down
I’m sure I can make something that may work!
@@Collindraker if so that'd be awesome. But I don't want you to spend the time designing and making them just for me. Idk if you can do a poll or find some way to ask your viewers and see how many people would want one or something but if others do then it may be worth it for you
hey man, i have a remix of you old wrench organizer on thingiverse, and seeing that you started selling them, do you want me to take it down?
Heck no! Keep it up! I took it down for legal reasons with a tool organizers company who doesn’t like competition. You’re all good dude.
@@Collindraker thanks, and got big respect for you dude
I always have a difficult time organizing my extensions so I love that design. All of your wrench organizers are too thick and too big. The wrench organizers take too much space, I have about 300 hundred differnt wrenches so most mechanics nee will sacrifice organization for space.I think the colors you chose for you organizers are the best though.(the black wrench organizers are the best) Your plier organizers that are modular are great! Ratchet organizers are spot on, love the variety and colors! You sold me on the tool cart ratchet organizers!I am also sold on you socket organizers because you can stack them. I loved this video!
Thanks for the input! What exactly would you need to get your wrenches organized? My vertical ones are pretty damn compact. I think I may make a video on all the styles and the amount of space they take up for reference for techs who are thinking about getting some. I’d love other professionals opinions though. I have probably made over 10 variations of these wrench organizers and I’ll make more if I have too.
@@Collindraker to get my wrenches organized, I personally need something close to the thickness of paper but will still keep the wrenches organized. The vertical modular ones are the best but they still take up to much room. I got over 300 different wrenches and one wrench drawer. Some tool boxes are extremely expensive so we can’t waste space. I want to send a picture of my wrench drawer to show you so you can see. I’m sold on everything else! This a great idea and I hope everything goes well!
Great stuff
Dude I would love to order some.
Yeah id buy a battery charger magnet holder.
Thanks for the input! What power tools and charges are you running?
@@Collindraker Milwaukee branded chargers
Spread em
???
Fair call ... negative/positive commentary is fine ..... just constant negative commentary becomes annoying eventually