Ribbon cable proses for Gold recovery Test
Вставка
- Опубліковано 9 тра 2022
- Not aol ribbon cable containe gold inside.I scratch it and if i see gold colour under plastic coating i save them,if not,they goes in waste cable pile.This small amount i collect over a year and a half.Now i do some test to see if they worth my time!
Thanks Dusan, been following you for years.
You inspire MANY.
You inspire me.
Peace and prosperity to you.
Respect and many true thanks.
Hey dusan great video! Good info.
If you need some help removing the bots from your comments I would gladly help watching comments for bad links posted. ✌️✌️✌️
I love to learn what I should save and what is no worth saving. Thanks for the great videos!!
It's definitely one of the best points of this channel 👍 the experimental vids have helped me a lot
Thanx boys!
Hello Dusan, Another great video. Keep saving them - gold is gold! You can always process them with other items instead of by itself. Take Care. Jim in Phoenix.
How?
I only keep the ends with gold fingers on them the rest of it I always throw in my insulated copper
Yellow and white gold ends, right?
@@seanwow4329 no only gold. The silver color ends do not contain precious
@@chosen1one930silver ended ones are silver
@@chosen1one930the silver ones are silver
Brilliant honest video.
You have to know what to process as well as what not to process. Thanks Andy.
Just save visible gold and it doesn't matter how long it takes when you get a pound or half process then it didn't look like it took to much acid for that amount I enjoyed your video very much thank you for sharing five stars my friend
Great video and info. Enjoyed
Great video
Brilliant honest video.
You have to know what to process and what not to process.
very much better than i expected.
Yes quite a surprise very nice job brother!!!!
Samo napred Dule
Hvala brat.
Hi master 💐💐 👍 🙏 I'm from India I'm watching your all videos thankyou very much
Any gold is good gold. Well done, thanks for sharing
I keep only the fingers, did this contain them as well or only the cables between them? top video mate, everything is a learning process, l am learning from you
You can put these cables in with your bga chips and process with them.
Bga chips are the ones that have the little gold strip coming from uder a corner right? Usually surface mounted?
Also I usually find these types of ribbons in disc reader/writers... And I almost always dig out the gold head.
Any ideas on how to get them apart/recovering gold from those parts as well?
After your finished getting all the metals out of solution, what do you do nitric and or hcl solution?
Also wondering easy/cheap way for reverse electro plating. Without acids, I saw maybe 3 videos on web/utube with ppl using 12v DC power supply or 12v DC automotive battery charger, a beaker or big thick plastic container. Then a strip of metal (forget type, with lead clamped to one side in solution. Then other side, I believe it's the positive (+) lead attached to piece of copper. Then pins ormetal w/ gold on it dipped in solution with power supply on. And it removes very fast, the gold. Think it's hci 35% (muratic/pool acid?) Or water. )
This guy and sreetips are the two best refining UA-camrs there are. If you haven't watched sreetips too I highly recommend
Thanks for another great video Dusan.
Is that just the ribbon cables or does it also include the gold plated ends to those cables?
Thanks
excellent
Do u have to cover and seal that during heat?
Can you do same method for removing the mask on PCBs, for ribbon cables?
(Submerge PCBs in water with 100% Lye - 1 cup. I use a very thick piece of glassware from household common items. Then I use induction heat/hot plate (electric, no flame). Heat for awhile. Use chemical rated gloves to elbow, 7 - 25 ml rubber. And toothbrushes at 1st, hard & soft bristle to scrubbing green/,red/yellow masking off of PCBs. Then I put PCBs in an stainless steel cooking pot of hot water with oldúsed lye/caustic soda and boil until glued copper sheets, release from fiber PCBs. So I can scrap as much products as I can from each piece/s. I'm pretty broke, no acids, and rely mainly on dumpster diving and donation. )
Does it matter what type of metal can, you use to burning those types of ribbon cables in?
How can I make nitric/muratic Acid, if I can't buy it in original liquid state/lab quality? Do you have a video describe what all chemicals you use, what are called (like water-H20, muratic - hci, AP - muratic & hydrogen peroxide). And how to make chemicals I can't buy? And what other exact materials for containers I can use if I can't get lab glass and/or equipment, yet?
Is that an induction heat plate u are using? What temp and for how long? Is that a new container the solution is now in? Lab grade beaker? What size? If I can't use or buy that's yet, what can I use? Is that a piece of solid normal glass u are using as a mixing tool?
Very Nice video, any thoughts on what the impurities are? After 2 refines it could be pgm’s dropping out with the gold.. however it’s unlikely there would be any on ribbons..
I think is silver.
Very good
So likely to be more copper than gold but what percentage do you think of that little nugget is gold? Would you call it effectively enquarted (25%=6karat) and ready to be parted by a nitric acid boil to remove all the base metals (after you increase the surface area by remelting and pouring it into shallow water) leaving just the gold ready to be dissolved one last time in aqua regia for the final refining to 24-karat
Toss them in with the diodes etc...gold stew!
How do I recovery of gold diodes? Do I have to take apart fully, i.e. cute in half? Aren't they diodes solid gold?
I think, these ribbon cables are not enough worthless to throw them away.
They are easy to process.
Very nice video. Probably good that you didn't use new acids. Maybe save future ribbon cables to be refined with other things. Those cables looked like they were coated in Kapton Tape which can resist temperatures as high as 400 ºC or 752 ºF. Did it take long to burn off the coating?
Coating burn easy, maybe 5 min with burner.
Dobrodosao nazad u SVET SCRAP hobija kao nas najbolji ucitelj do sada.
Ja jos uvek skupljam sirovinu i materials I mogu ti reci za ovih 4-5-6 Godiva se skupilo svasta nesto.
Nadam se da si resio sve problems pozitivno i da je sve OK.
Kao I do sad ako te put nanese do Krusevca javi se broj tel.sam ti Octavio vise puta.
SVE u svemu drago MI je sto the vidim I zelim ti svu srecu i zdravlje sveta.
Miodrag
What is that white. Powder you are adding? Where can I find that? How long did you let that site for , before it turned that green color? Is that a glass or plastic container? Are you using plain old coffee filters to filleting your stuff? Does it. Matter if coffee filters are brown or white?
How can I make aqua regia if I can't buy lab grade chemicals? What can I use instead of auqa regia made with acids?
👍
Why are you burning it? What's that do? What if I don't have a torch?
I have been cutting the ends off the green ribbon cable to try to get the gold off. Should I try to process the whole cable instead of the ends? The ribbon I have been collecting are from TV and computer screens. Where one end connets to the screen and the other to a gold plated board! Am I waiting my time?
เยี่ยมครับ
Proof-of-concept = confirmed (practicality and cost-effectiveness = hell no).
But that same process should play out in the same way with SIM cards or other plastic heavy storage media like memory cards or even the new credit cards or similar plastic material with heavier gold present
Next time you have this ribbon cable in a scrap can you show it and show how you test and everything?
Just scratch it, if is yelou under plastic coating, add it to pile if not, to a low grade copper pile.
@@999DusanGoldrecovery Thank you My Friend
Hi I have a neutralized smb solution I added some that the gold precipitated but when I check the solution with sncl2 it shows that there is still gold to save them?🙂
Hi Sir. Where i can buy cpu ceramic scrap? Do you recommend alibaba?Thankyou
I need your help and advice, can you guide me from where I can buy computer hardware or electronic hardware
Great trial and error 999 at least you know now 👍
The dimpled appearance indicates a PGM
What "dimpled" appearance? Where?
@@seanwow4329 Hi Seanwow go to 10:55 and 10:56 where he is holding it in his hand. Notice the rough appearance. I have text books by Charles Butler who taught torch assaying based on the Texts of Shepherd ( early 1900s)and Dietric. They examined the effects of Palladium, Platinum and Rhodium on a gold or silver bead. Platinum will give a Soccer ball appearance, Pd and Rh impart a tiny dimples that give it a frosted appearance. A pure Silver bead is very smooth , but may sprout shoots of silver when cooling. Gold is ultra smooth glossy and does not sprout. A PGM may be alloyed with gold or silver to help it resist heat , and impart hardness.
well that is one way to get the content up am queries as to what you will get it can't be much 🙂
But it's better then ZERO. And it helps showing others how to more learning, as well as us learning ourselves when we are trying to recovering, of everything.
@@seanwow4329 look hobbie extraction and this is the level this is is always about how to do it as cheaply as possible valuing time very low you can use the chlorine and salt to improve the oxidation properties of vinegar to do the work of( ap )basically pool acid with hydrogen peroxide. but the vinegar must be very concentrated and the water can only keep so much metal salts in solution so at some point adding salt stops helping and the solution must be changed this will go slower than with ap and will work best if you have a cheap or free way to keep this solution hot. you can make vinegar and concentrate it by distillation hydrochloric or pool acid you have to buy nitric acid same thing 10 times more expensive physical separation will always be cheapest electrolysis or pyrolysis are the next cheapest option chemicals will usually be most expensive the order and the steps will very and the 2 things you can not do are you should not do this are 1 leave dangerous waste products behind and damaging your local environment.this is always about making things better for you and those around you.and to have a little fun:--)
@@seanwow4329 i would look into pyrolysis of plastics to make gas and diesel and some plastic can be reprocessed for use three d printer filament and while eventually something will learn to eat plaSTIC it took less than 40 years for nylon and less time for tire rubber or highways would be under mounds of this
Hi my friend. Check nitric solution for silver
How, please
Again what is that white powder? Why are you adding it? What does it do? Where can I get it at? What else can I use if I can't get that?
I see you have a lot of questions. Best way is to watch the videos. Take notes and build your knowledge one piece at a time. If you have IC chips to process then watch all the videos on that subject you can find. Take notes and look at the equipment they use and get the best equipment you can manage. Do one job at a time, learn from it, then move on to the next one. You can't learn everything at once.
Watch the videos which helps these guys to make more, hit LIKE on each video and subscribe to a few channels. It all helps.
And the white powder I think you are asking about is SMB, sodium metabisulphite, which "drops" the gold at the end. Some people leave it until the solution is clear, some leave it overnight. It is a food type product, used to sterilise kitchen equipment, get it from internet or a local restaurant supplier.
I hope this helps. Hope you get plenty gold sir. 🤓🏴👍🥇
Nic brooo nic
i do have a jar but it has much less in it 5 years i think.
They grow slow hahah
I like ur ewaste videos. I noticed u get 1000s of views on ewaste vids but the other videos only get a few hundred. I have the same issue and u gotta decide if u want views or not
or you can plate the copper out of the gold :-)
HOW? PLEASE 🙏
@@seanwow4329 well if you have more copper than gold say 10 to1 you melt a bar then electroplate out the copper in a sulfuric acid sell the gold and other Noble metals will wind up on the bottom of the cell as slimes. the gold can be extracted from that
So there's gold inside ribbon
Seventh😃
I'm trying recovery with denox solution prosses how to get denox prosses plz inform in your free time 🙏🙏🙏🙏 💐
Professional not
You talk so loud
thanks for good video .Hello, don't be tired, my dear teacher and friend. I need help in recovering gold from the flat LCD mobile phone. Can you help me? Thank you.