Ang galing mo naman sir matagal ko na gusto matutunan yan kasi mahal at bawal ung nitric acid..sana bro matutunan ko yan may mga ipon na kasi ako mga ganyan namimili kasi ako ng mga board..ty so much god bless
Very interesting to see your non nitric acid process. I know the process, but its good to see it in action with fairly low grade gold material...that I have. Nitric acid is fairly expensive here in the U.S., but HCl, bleach, SMB and H2O2 are pretty cheap and available. I have the exact same scale!
i was thinking to incinerate some contacts with plastic and then do the same procedure to save the work of extracting the pins from the plastic. Do you think it should work?
There's no reason to burn the plastic...and it forms small beads of metals that take longer to dissolve...most of the chems you need can be synthesized with ease so product availability shouldn't be an issue if you have to use an excess amount like I've done. Plus if you have a distillation setup, you can recover the hcl if you have the knowledge and balls to try....if you do please use PPE I didnt see any when burning off plastic and that's not good dude...
With the peroxide...take a normal 3 percent bottle and freeze it, let it fill a cup until it's a slow drip, then repeat the freeze and thaw...sooooo much cheaper to just make it yourself
miners miners np man...just remember doing the peroxide that way it concentrates to around 30%...do not spill on yourself bc it will burn and bleach your skin for a day or so
So 2 lb of ribbon cables and other cell phone parts yields approximately 2 G of gold roughly that's good to know as you wouldn't want to work with much less than that and 5 lb would be about bare minimum for making the whole process worthwhile (assuming I'm not making monetized videos), is that about what you figure also?
Thank you so much, the good thing of that solution there's nothing nitrogen ions so we can precipitate perfectly, because the chlorine has easily neutralize with SMB.
👍 emeğine sağlık çok yararlı video olmuş teşekkür ederim. Bir sorum olacak altın tozu ateşte kaç dakikada eriyor.Cevap için şimdiden teşekkürler USTAM.
merhaba, çok teşekkür ederim, oksijen asitelin kullanırsanız altın tozu veya altın tozu daha hızlı erir, 1 dakika ila 2 dakika, benim durumumda mapp gazı kullanıyorum 3 ila 5 dakika daha uzun sürüyor
Thank you for the information filled video. One day I'll be able to afford some proper glassware but until then I'm still using coffee makers (hot plate and tempered glass coffee pot) for pennies or free, but I'm okay with that because it works (so I don't care what it looks like). XD
yung ginagamit ko quantitative ash less, pero mabagal sya pero maganda naman ang reaulta, maraming availble sa mga OL store pwedi na yan basta filter paper.
I don't know how natural your talking but the closest you can get is by using white vinegar (the higher acidity the better) cleaning vinger will not work, hydrogen peroxide, and white sea salt (it needs to be sea salt). It will take a longer period of time like a couple weeks and using a bubbler helps the process speed greatly. I think this would be as close to natural as possible.
@@Dynaboy1 yea then that's the way to go. White vinger hydrogen peroxide white sea salt. Start with a mix of 80/20/10 adjust if needed. Recommend a small bubbler it will speed it up for sure. This is only gonna work on trimmed chips or pins anything where you can see the gold it will not work for extracting gold from in side ic chip this is a very mild form of natural acid you using so it will not dissolve base metals and plastics it will basically just deplate the gold from whatever its attached to.
the scrap that I used contains gold, some are high grade and some are low grade, so it is not possible to measure how many grams of gold it contains, so it is also not possible to measure how many ml of chemicals to use in it, so in these situations it will start You should put the chemicals in the lowest amount, so when you see that everything has dissolved, stop adding the chemicals, that is the right way in these situations, so this is what I used.
Hello! even though you got the gold, you did a lot wrong. 1. there was no point in firing. in the film only copper. 2. The first etching had to be done with sulfuric acid (autoelectrolyte) with hydrogen peroxide. in this way you will dissolve the copper and preserve all the gilding. 3. Well, dissolving the gold wasn't perfect... oh well.
Ang galing mo naman sir matagal ko na gusto matutunan yan kasi mahal at bawal ung nitric acid..sana bro matutunan ko yan may mga ipon na kasi ako mga ganyan namimili kasi ako ng mga board..ty so much god bless
Thank you, may upcoming video pa tayo, na walang nitric din abangan nya lang cell phone board to.
Very interesting to see your non nitric acid process. I know the process, but its good to see it in action with fairly low grade gold material...that I have. Nitric acid is fairly expensive here in the U.S., but HCl, bleach, SMB and H2O2 are pretty cheap and available. I have the exact same scale!
Thanks, I have up coming video no nitric acid too, old key pad cell board.
@@PoorMiners321 can use 29% HCL?
Thanks bro keep up a good work
Yes sir its posible..
@@PoorMiners321 thank you bro for info
welcome bro
Good work with minimal equipment. Well done you!
Thank very much sir🙏
What is sodium metabisulphite.? Is that baking powder or baking soda.?
that's actually called sodium meta bisulfite with chemical formula Na2S2O5
i was thinking to incinerate some contacts with plastic and then do the same procedure to save the work of extracting the pins from the plastic. Do you think it should work?
will also work
Wow Chlorine is a higher contain od sodium hypochlorite than bleach, no nitric use, wow.. thanks for sharing Poor miners...
thanks
Polo que entendi ,essas fitas foi colocada no clorodico primeiro ?
There's no reason to burn the plastic...and it forms small beads of metals that take longer to dissolve...most of the chems you need can be synthesized with ease so product availability shouldn't be an issue if you have to use an excess amount like I've done. Plus if you have a distillation setup, you can recover the hcl if you have the knowledge and balls to try....if you do please use PPE I didnt see any when burning off plastic and that's not good dude...
Good job sir, isana na nmang kaalaman salamat. Maitanong ko lang nag e expire ba ang stanous test na matagal kong ginawa. He he syensya na
Thanks, oh madali lang yun mag expire bro, siguro mga dalawang linggo lang ang magandang bisa nya pag lagbas nya ng dalawang linggo humihina na yan
Thanks bro, 👍🏽
Good job !! I trying to do it.
With the peroxide...take a normal 3 percent bottle and freeze it, let it fill a cup until it's a slow drip, then repeat the freeze and thaw...sooooo much cheaper to just make it yourself
Thanks..
miners miners np man...just remember doing the peroxide that way it concentrates to around 30%...do not spill on yourself bc it will burn and bleach your skin for a day or so
Hi. Ok Video, But please do not put Clear Acid in a water Drinking bottle,
Well what is better to use Chlorine or bleach?
Bleach is better, its easy to precipitate gold beacause of low hypochlorite contain.
Very good, good luck my master
Thanks❤
Good job masha Allah
Thanks
So when you washed the filter off we’re you using hydrochloric acid?
use water not hydrochloric.
larutan piranha apa bs buat melarutkan emas/perak perbandingan dgn perbandingan h2so4 sm h202.trms
Yeah but I'm not used that method so far for a reason..
You should wash the burned dust to extract impurities and dissolve then throw all the alcali before adding acide
👍
Wash with water ?
Could work with silver?
maybe is not work for silver..
So 2 lb of ribbon cables and other cell phone parts yields approximately 2 G of gold roughly that's good to know as you wouldn't want to work with much less than that and 5 lb would be about bare minimum for making the whole process worthwhile (assuming I'm not making monetized videos), is that about what you figure also?
yes,
Thanks for this video. That quite a good yield you got there.
Thank you so much, the good thing of that solution there's nothing nitrogen ions so we can precipitate perfectly, because the chlorine has easily neutralize with SMB.
WOW!! GREAT WORK!!🏆🏆🏆🏆
Thanks!!
Or were you just using water to wash the filter? Then added the chlorine to the beaker with water and the material?
yes thats okay to add water its alao help to neutralize faster when you add smb.
👍 emeğine sağlık çok yararlı video olmuş teşekkür ederim. Bir sorum olacak altın tozu ateşte kaç dakikada eriyor.Cevap için şimdiden teşekkürler USTAM.
merhaba, çok teşekkür ederim, oksijen asitelin kullanırsanız altın tozu veya altın tozu daha hızlı erir, 1 dakika ila 2 dakika, benim durumumda mapp gazı kullanıyorum 3 ila 5 dakika daha uzun sürüyor
Love you❤❤❤ bro. Raja from Tamilnadu. 🇮🇳
Thanks bro.
Good job nice video good PMR. 🤔👍
Thanks🙏
nice one, rabeeb
Thanks brother..
Nice work 👍
Thanks
Sir,how many kg of cell board can yield a gram of gold button from your experience
41 to 50 pcs of old scrap keypad mobile phone can extract 0.6 to 1.2 grams of gold from connectors, boards, and Ic chips.
good day sir yung hydrochloric acid po ba is muriatic acid lng din?? na nabibili sa grocery?? thank u in advanced po
opo sir
Thank you for the information filled video.
One day I'll be able to afford some proper glassware but until then I'm still using coffee makers (hot plate and tempered glass coffee pot) for pennies or free, but I'm okay with that because it works (so I don't care what it looks like). XD
me too I have nice hot plate but i dont used it to save curent.. the important here is your equipment working better.
เก่งมากคุณบอกทุกขั้นตอน
Thank you brother
Great video!!!!
Thanks!!
900th 👍🏻 great video!
Thank you❤
❤nice gold!
Thanks❤
Will it work with muratic acid
Together hydrogen peroxide
Nice 👏🏾👏🏾
Thanks buddy..
...sir anong URI Po ng filter paper Ang ginagamit nyo.
yung ginagamit ko quantitative ash less, pero mabagal sya pero maganda naman ang reaulta, maraming availble sa mga OL store pwedi na yan basta filter paper.
@@PoorMiners321 ...sir,anong OL store Po.
@@PoorMiners321 ..at Saka sir,Yung SMB ba Yun ba Yung food grade na sodium metabisulfite.
mag texk ka don sa page ko
Is there a way to recover with natural without any acids ? Or to dissolve the gold without any acid ?
The chemicals that I used in this video is available in a market, and nothing restrictions, but if you think in natural way? my answer is no.
I don't know how natural your talking but the closest you can get is by using white vinegar (the higher acidity the better) cleaning vinger will not work, hydrogen peroxide, and white sea salt (it needs to be sea salt). It will take a longer period of time like a couple weeks and using a bubbler helps the process speed greatly. I think this would be as close to natural as possible.
@@rapidric4445 I mean from natural elements, without any corrosives or chemicals made in lab.
@@Dynaboy1 yea then that's the way to go. White vinger hydrogen peroxide white sea salt. Start with a mix of 80/20/10 adjust if needed. Recommend a small bubbler it will speed it up for sure. This is only gonna work on trimmed chips or pins anything where you can see the gold it will not work for extracting gold from in side ic chip this is a very mild form of natural acid you using so it will not dissolve base metals and plastics it will basically just deplate the gold from whatever its attached to.
@@rapidric4445 can i do it somehow slow process for example only with sea salt ?
👍
Is there gold inside ribbons
not all, sometimes gold plated present in prenter ink cartrage, old phone connectors,
Thank God bless you❤
Thanks brother..
No good...don't explain what he is doing what he is using and how much and where to get
listen carefully, don't drag the video or forward, if you don't understand what I'm saying, turn on cc or subtitle..
mayat, thanks
Your welcome body..
Brother sinubukan ko nayan wala akong narekover na ginto...
Kailangan mo dag dagan ng hcl baka nasubra ang chlorine na neutralize ang hcl kaya pag nilagyan mo ng smb, walang precipitation na mangyayari
Boss itong vlogs mo ngayun may kasama ng nitric acid...
Salem cupels works in india
At saan Po Tau pwede makabili
e sa online store brad..
God ser anung pangalan Ng aced Ang gagamitin natin
muriatic and zonrox it can be dissolve gold foils from electronic waste then precipitate with sodium meta bisulfite.
Chemical nam please
Hydrochloric acid known as muriatic acid hydrogen peroxide also known as aqua oxinada, for precipitant sodium metabisulfite.
nice
Hello sir, how can I chat you personally, are you filipino?
Did you wash your ash with gold, after putting some chemicals?
yeah go to my poor miners fb
Nag pm na po ako sa inyo sa fb.
👍
Pisahkan pasir dg magnet...langsung bakar pakai timah hitam.
Thanks
So you guess on everything, nothing is measured
the scrap that I used contains gold, some are high grade and some are low grade, so it is not possible to measure how many grams of gold it contains, so it is also not possible to measure how many ml of chemicals to use in it, so in these situations it will start You should put the chemicals in the lowest amount, so when you see that everything has dissolved, stop adding the chemicals, that is the right way in these situations, so this is what I used.
Like
Thanks..
9
🤝
Hello! even though you got the gold, you did a lot wrong.
1. there was no point in firing. in the film only copper.
2. The first etching had to be done with sulfuric acid (autoelectrolyte) with hydrogen peroxide. in this way you will dissolve the copper and preserve all the gilding.
3. Well, dissolving the gold wasn't perfect... oh well.
let me know if you read it. if you have questions, then write.
Thanks how to do that?
voila encor plein de pollution pour un si petit résultat
👍
За 1 час все это сделать можно))))))))))
yeah more than 1 hour, if i covered the whole process i know no one is watching, thats why i covered only a very important steps and speed up.
Is he really talking
!!!!!!!
👏👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
❤