I was smiling the whole way through this video; such a good idea!! I’m gonna give this a try. Thank you for putting this up. Gonna go watch your other videos now 😊
I cant believe they didnt bow in the middle, thought for sure it would. I like what you did and stuck it to the side of the fridge as even more of a space saver. Great idea and thanks for sharing.
I worried about that as well! But it's been 2 weeks of use and still no bowing. If you double up the paint sticks, thickening the shelves, it would help prevent bowing for sure. Thanks for watching! :)
WOW. This is just so beautiful, creative and great taste (no pun intended). Thank you so much for sharing, and I cant wait to see what you come up with next!
Just depending on how deep you made the spice rack, you could drill a hole on each side and slide it through. But if you made it just the way I did, you might not have the depth to do that and still have enough room on each shelf for the bottles. What I would do is use wood glue, clamp them, then once the glue set up, wrap the ends in twine in a “x” pattern to make it look finished. If your dowels are big enough, you could use small nails but I would pre-drill a small hole to help prevent the wood from splitting while hammering the nail in.
That’s a great idea! How I did it is definitely the “I’m broke and know nothing about carpentry” way 😂 but hey this spice rack is still going strong! Wood glue is amazing stuff.
Really if you were making it 2 shelves instead of 4, you’d need just half of the material I used. So two of the five-gallon paint stir sticks and 2 garden stakes instead of 4 because you can cut the two in half to make four pieces, 2 on each side. Sort of hard to explain but hopefully I’m making sense 😂
Yes it will fit “regular” sized spice bottles. You can measure across the bottom of your bottles and as long as they’re not more than 2 inches wide, they’ll fit fine.
I feel like there’s a better way to attach the twine. Drill small holes on each side and knot the twine so it doesn’t slip through the hole. Or perhaps nail small nails and tie twine around the nails? I just don’t think the thumbtacks are sturdy enough.
Yes. If it were me I would drill pilot holes (because the pieces of wood are small and prone to splitting) then I would find a stud to screw it to. The spice rack itself is light but once you put all those glass jars on it, it will have some weight.
Really clever idea, and I love how it looks.
Thanks! 😊
Thank you for this!! I needed a solution to my spices. Thank you so much for doing it budget friendly. As it is needed.
You’re welcome! I’m still using it and still love it! Thanks for watching 😊
Thank you for making a simple to do spice rack that looks great and is functional. Love that it’s on the fridge!!
Thank you! 😊
I was smiling the whole way through this video; such a good idea!! I’m gonna give this a try. Thank you for putting this up. Gonna go watch your other videos now 😊
Aw thank you so much 😊
I love this idea I've been looking for a DIY wood type spice rack for my kitchen wall
I’ve been using it for the past two years and I still love it! Thanks for watching!
I cant believe they didnt bow in the middle, thought for sure it would. I like what you did and stuck it to the side of the fridge as even more of a space saver. Great idea and thanks for sharing.
I worried about that as well! But it's been 2 weeks of use and still no bowing. If you double up the paint sticks, thickening the shelves, it would help prevent bowing for sure. Thanks for watching! :)
WOW. This is just so beautiful, creative and great taste (no pun intended). Thank you so much for sharing, and I cant wait to see what you come up with next!
Thank you so much! 😊
Thank you so much for sharing. You inspired me!!
You’re welcome! Thank you for watching 😊
Looks amazing!!!!
Great idea! Thank you so much for sharing. I love it! ☺️
Thank you! 😊
Great project share!
Thank you!
I do love that!!! The jars are 24.99 so I would have to spend almost 40 if I get the jars....
Thank you! Yes just the spice rack itself is under $10.
Hey I'm in the middle of making the rack quick question if I use the dowels how would you do it nail them in ?
Just depending on how deep you made the spice rack, you could drill a hole on each side and slide it through. But if you made it just the way I did, you might not have the depth to do that and still have enough room on each shelf for the bottles. What I would do is use wood glue, clamp them, then once the glue set up, wrap the ends in twine in a “x” pattern to make it look finished. If your dowels are big enough, you could use small nails but I would pre-drill a small hole to help prevent the wood from splitting while hammering the nail in.
its not real budget friendly but i use a kreg jig an pocket hole screws.....clamps suck....i take the screws out when dry to reuse!
That’s a great idea! How I did it is definitely the “I’m broke and know nothing about carpentry” way 😂 but hey this spice rack is still going strong! Wood glue is amazing stuff.
Can I make it with 2 shelfes I have a small kitchen
Sure! You could cut down the garden stakes and paint stir sticks to customize it for where you’re hanging it 😊
Ok so just measure the space and cut them down I use the same amount of material for the project sorry if I'm asking too much! But I love it! 😍❤
Really if you were making it 2 shelves instead of 4, you’d need just half of the material I used. So two of the five-gallon paint stir sticks and 2 garden stakes instead of 4 because you can cut the two in half to make four pieces, 2 on each side. Sort of hard to explain but hopefully I’m making sense 😂
🤣 I get it now thank you so much that will be my next project ❤❤❤
I leave them in the bottle they came in . will they fit.
Yes it will fit “regular” sized spice bottles. You can measure across the bottom of your bottles and as long as they’re not more than 2 inches wide, they’ll fit fine.
I feel like there’s a better way to attach the twine. Drill small holes on each side and knot the twine so it doesn’t slip through the hole. Or perhaps nail small nails and tie twine around the nails? I just don’t think the thumbtacks are sturdy enough.
I’ve been using it for over a year with no issues but those ideas would be good too! 🙂
What kind of paper did you use and how you put the print on them
I used kraft printer paper and just sent them through my printer.
can I mount it
Yes. If it were me I would drill pilot holes (because the pieces of wood are small and prone to splitting) then I would find a stud to screw it to. The spice rack itself is light but once you put all those glass jars on it, it will have some weight.
Thank you so much ❤
💖