How to build Super Decathlon RC plane DIY
Вставка
- Опубліковано 29 сер 2024
- American Champion Decathlon RC plane DIY Build video tutorial
How to make RC airplane at home
Wingspan: 1,19m (47")
Flying Weight: 285g (10 oz)
Materials: XPS foam 3, 4, 5mm / Depron
Motor: MF1904 2500KV (16g)
Propeller: GWS 7035/8040
Receiver: FlySky FS-iA6 (7g)
ESC: 12A (14g)
Servos: 5g x 4
LiPo battery: 600mah 7.4V (39g) 2S 850 mah 7.4V (47g)
Bellanca Decathlon/Citabria 7ECA free plans numavig.com/pl...
Foam cutting ASMR no talking
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
what a spectacular ability to cut straight freehand!
I envy you for this skill.
Truly wonderful! Also admirable is the care with which you decorate your models. Congratulations from an old model maker who is not at your level although he is already 60 years old and who still cannot fly ... maybe when I retire I will decide to learn .. mah!
Tou have a skill I admire! Your build video even without sound is great! I'm a new subscriber! (No sound because my wife's asleep, and I should be also! )
Build and editing: high quality !!
Beautiful job!!,,,finally a foam plane that doesn't look like a foam plane. The Decathlon is my favorite design.
I love the way you build ! My patience seems to have left me. Thanks for the lesson !
I don't know how anybody can give this video a thumbs down. Your skills are impressive. I enjoyed watching it, thanks 👍!
Thank you so much for this - goes into build queue right now. Some times it is great to have a low speed pretty vehicle.
Awesome build! Although i dont like foam planes so much i admire a lot your foam skill. You make foam planes look incredible!!
Смотрю на вашу работу по сборке удовольствием. Молча без коментарием но в н наглядно и понятно.
Класс
Your formica table is crying. Haha. Love it, thanks for your vids.
You did a really good job with this man, congrats.
Excellent build and quality, many thanks for all the information and plans. Looking forward to your next project 👍
Omg I love how perfect every edge is
Anything but a red prop would not have worked! Very nice build my man . Excellent craftsmanship.
That was the goofiest takeoff I've ever seen. It looked like a bug. 😂 Nice save!
that opening clip had me nervous
Love your builds. Thank you. I think I will give it a try when I'm done building the sig riser
Excelente trabajo!!!! Felicidades por el sistema de construcción. He fabricado el Decathlon con tus planos y todo coincide a la perfección. Gracias
Saya sangat suka cara pembuatan ...model pesawat nya
Wow! GREAT Trick takeoff! Do it again! - 👍👍👍
Excellent build video, detailed but also short. Very skilled editing. Thank you for sharing!
I have seen many RC Planes built, and have built many Myself, But, you are on another level!! I give props, where props are due,,, and props are due!! Your talent is second to none!! Have You ever built a 60" Fast Electric Delta Wing?? Kind of like the Stealth Bomber?? That's My ongoing project, for some reason, I love the Stability and Speed, of the Delta Wings. I subbed up, keep the vids coming please, I'm digging your build style! ........... Peace!!
You sir are a true artist , well done .
Wonderful project! I am about to start building this - my very first attempt building an RC plane (excluding a failed one with a balsa kit I had as a Christmas gift when I was a boy... ages ago).
Just a couple of questions:
1) what grit of sandpaper do you use to sand the foam?
2) what iron settings do you use to iron the tape onto the plane?
Many thanks in advance, and happy 2022!
1) P100 - P400
2) take your iron and try different temperatures until you find the optimal one
Thank you!
Thank you for sharing,great build and result . tip my hat to you .
I only make airliners but I loved you plane... and video
incredible foam plane...
как всегда отличная модель, аккуратная сборка, молодец. Лайк конечно
I really admire your model making skills and also decorating skills. Very impressive video.
Professionally done , good work
what superb model and so easy well done
Nice work, I made a Versa Wing from 6mm Depron sheet ( not foam board)...it's an underrated material IMO.
Also started using Depron in my balsa builds too...🤔😎
What glue do you use?
@@xeriamaned UHU PoR....contact glue, but I also have a white glue for longer setting times, cheaper too...🤔🤔
@@EnglishTurbines thanks, I guessed it was but just wondered in case you found a supply of the Titan glue...
@@xeriamaned I suspect the Titan glue is the same as German UHU...POR...Difference is, it's a fraction of the price. Of course..🤔
your hand skill are amazing
Really beautiful work, dude! Fantastic airplane! 😃
You know, I've been thinking about trying woodworking tools for this kind of foam... It may help a lot! I mean things like chisels and so on. 😊
Amazing video thanks 🔥🔥🔥🔥
You are an artist man
What a beautiful airplane! Your construction is top notch! I enjoyed every second of your build! Liked and subscribed!
homeboy got skillz!
Nice build video. Appreciate it 👍
Nice detailed and clean build
VERY VERY GOOD PROFISSONAL, BRASIL OK.
Impressive. Great "paint job."
Now I have a reason to set the printer up after the move. Haven’t needed it till now. Only been here for over a year. Probably doesn’t even work any more. Lol
Wonderful vidéo 👍🏻👍🏻👍🏻
Ecxelentt spectacular
Saludos desde Argentina .
👏👏👏👏👏😷👍👍
Amazing
Satisfying
such a good plane and by the way very nice deception!!!
Nice video
This is awesome. I love your videos and your fine detail quality finish. One question, what's the "anodized aluminium?" pipe you are using for grinding/cutting holes? Do you call it "fishing rod"? Where/how you get/make one of those?
ua-cam.com/video/a2liQWJPplM/v-deo.html
Thank you!!!I find the pants from laptop.
Fantastic
Beau travail. Félicitations.
Maybe in my next life i will have a DIY store like that in my neighbourhood.
Good👍
that's got to be the riskiest take off ever
Great skills mate welldone!!
amazing congratulations for your job
The store you get the foam board is there one in America, you do great work , and the video was great too.
Espectacular!....👏👏👏👏👏👏.... saludos desde 🇦🇷!...
you surprised me again
Another great video.
Nice videos. Are you using XPS or depron? In description both are written.
Depron is also XPS foam
Really good project.
beautiful plane, can i use baterry 3s 2200mah ?? motor 2212
This is a nice
This is a real beauty. 😃 👍
I wonder if 3D printed it'd fly? 😆
@abdul bari Yeah, you're probably right. ✌
Nice
Bravo, bravo, bravo!!!!!
Bravo, BRAVO, B R A V O!!!!
Bliactiful!
Bardzo ładnuy build. Szkoda, że nic nie mówisz...
Awesome design and build! Do you think it will fly with a 2208 motor (39g) or will it be nose heavy? Thanks and hope to see more of you videos in this future
slide the battery
@@NumaVIG I will give it a try, thanks! I'm halfway building the airplane now :) What exactly is the purpose of ironing the packing tape and isn't it melting the XPO ?
Bonjour.
Tout D’abord bravo pour vos réalisations très inspirantes et vous superbes vidéos !!!
J’essais de réaliser le même avion que vous et j’en suis à l’équilibrage. Est-ce que l’avion doit piquer du nez légèrement quand il est en équilibre. Comment avez-vous fait pour le régler ?
Merci pour votre réponse.
Kanat uzunluğunu ne yaptınız. Videoda kanat uzunluğunu bulamadım ben
Çok güzeL
ÓTIMO TRABALHO FICOU MUITO BOM, BRASIL OK.
Hi nice video NumaVIG how long is the wing's and thanks for all u videos and u time
Cool
Brother...you are a machine.
Thanks NUMA
Very nice done! Superb video and superb editing! What kind of gleu are you using?
copolymers of vinyl acetate
I really like your building techniques, they look much nicer than the flite test style (although I imagine it take a while). Do you design your own planes with CAD, and if you do, would you make a video showing how you do that?
I use Photoshop
@@NumaVIG oh- i gotcha
круто, с виду кажется что все так легко и просто))
Very sleek!
Nice build video and great to see your fantastic work/art.
I have a question. Where is the center of gravity from the leading edge of the wing?
Many thanks and thumbs up!
25-30% chord length
Beautiful buid
Nice work
You're really good at this! May I suggest you make some Hilmar Lange designs? Like the Pinkus etc, they are sweet!
Thank you for the great job. Can you explain how many degrees of deflection control surfaces?
I didn't measure
Why you like liquid glue betterthan hotglue stick/glue gun
Great video..really pro quality. I want them blueprints. You got me ready to build again. Thanks
Excelente video , como todos
Me gustan estos tipos de vídeos
Saludos desde Argentina!
---‐----------------------------------------
Excellent video, like everyone.
I like these types of videos.
Greetings from Argentina!
Bro de casualidad tu sabes de que tamaño es la ala completa
У тебя так аккуратно получается собирать, а авиамодельный кружок ходил что-ли, или руки ровные?)))
кружок был судомодельный 🚢🤓
muito bom gostei valeu
Muy bonito 👍👍
Wow , respect
How clean and efficient that build is! Please, can I ask what glue is used if possible?
0:22
Hello, nice and clean work , please inform me which channels are conected ailerons servo, thank you in advance
this is flaperons ua-cam.com/video/J6hLtpEtJJ8/v-deo.html
Awesome model.
How long did it take for you to build it?
Nice video... i like the wing snapping finger part.
How long it takes for you to complete the plane?
2-3 days
Good 💯🌹👌👍❤️💯
Vidio yang sempurna...
Could you provide the length, not including the motor. I want to check my printed plans to be sure they are 100% scale.
Fuselage template (without rudder) 693 mm