It is cool, but new flyers need a large wingspan. I learned with a glider that I strapped an engine pod into. I started by just hand tossing the thing off of a hill, and steering it around. Got the hang of it. Then I installed power. It worked. Before that I spent a lot of money crashing small models. But your design is really nice. If you could scale that up about 50%, it would perfect. Reminds me of the Goldburg Eagle.
I am gonna make it but the fuselage will be made of 5mm depron because I live in Belgium and it is very hard to get the right thermocol. Do you think it will be okay?
Hello 3jwings, when I connect one of the motors to the esc, and then turn of the transmitter, the esc flashes quicky and motor vibrates and does not react to throttle control. Calibration problem? Could you please help me it would make my day🙏
Beautiful model, obviously made with great skill! It's pretty obvious that you're not a beginner - and it's a pleasure to see you work but I suspect most people beginning their model making journey would struggle to put this together!! It might be a perfect vehicle for NOOBS to fly but I suspect most NOOBS would struggle with its construction!
632 good work. but, ailerons should extend TO the wingtips. 740 a bellcrank can be made from credit card-like plastic. 756 the lengths of the 'arms' of a bellcrank should be Equal. period. any Needed asymmetry should be accommodated at the servo arm and/or control horn. 832 the bellcranks should be located Near thirty percent of chord. in part because, a longer pushrod is a 'better' pushrod. 904 a control horn should be tall enough that it does not touch the flight surface at full deflection. thick trailing edges make more drag than thin ones do. 905 a pushrod should NOT have any unnecessary bends in it. 932 those things are not functional. there needs to be sufficient structural robustness around the hold-downs. 1113 if the butt of this type of motor is not supported when a prop is mounted, the end/brush assembly can be pushed out. 1405 the vert-stab is heavy, because it's taller than necessary. the wingspan could be reduced; so that the span of the horiz-stab is equal to thirty percent of the wingspan.
That's not for noobs. The amount of effort you've put in is insane.
for noobs to fly not to build
I really like the simplicity of this design. Very easy to get the required material. Great job!
Superb little model 😊
The aileron system is very smart 👏
Should I use 8.5*20mm 3.7V motors or 8.5*20mm 7.4V motors?
I have watched several of your videos. You have some serious skills as a craftsman. You set new standards for what a hobby should be.
It is cool, but new flyers need a large wingspan. I learned with a glider that I strapped an engine pod into. I started by just hand tossing the thing off of a hill, and steering it around. Got the hang of it. Then I installed power. It worked. Before that I spent a lot of money crashing small models. But your design is really nice. If you could scale that up about 50%, it would perfect. Reminds me of the Goldburg Eagle.
What is your purpose of using MT3608 BOOST MODULE 2A
Bhai isme esc na use karke drone transmitter and receiver use kar sakte hai
This shows there is no cost barrier if you want to learn to fly and build an RC planer. Great job. Cheers.
Thank you for showing all the triks to make the plane parts 😀😀😀
I have built exact same model with same components after watching this video......
Excellent bro.... Thanks for making video on it
Did it fly, also what motor you used ?
Your finishing is very good 👍👍
Great work Jonu 👏👏👏
Kitne inch ka propeller use kra hai bhai apne
Hey what is thickness of thermocol used for wing and can you please give height of airfoil please fast can you reply
Which foam you used in this video, reply please
Very nice build and she flies beautifully. Love the way you made everything out of ordinary things you can find. Happy flying.
It was a nice project.
Спасибо мой новый друг! Мне очень понравилось! ☝️😃👍
From which shop you buy thermocol sheet please feedback
Hard work pays off.. great output
Incrível! isso realmente e uma arte muito bom ver esse projeto um show parabéns e obrigado por compartilhar!
thanks for sharing this wonderful project ❤❤❤
What type of thermocol is that where can I buy it
How far can it fly (approximately)??
Muito bom trabalho. Mas um estilete iria bem no lugar de uma mini serra pra cortar certas partes do isopor.
Where do you get your foam?
Hola soy de chile , me
Gustaría armarlo aquí y colocarlo a volar. Tienes los link para comprar todo ? Desde el control remoto , todo !!
Motor ka nam kya he jo aapne Tire Banane k liye use ki hai?
I am gonna make it but the fuselage will be made of 5mm depron because I live in Belgium and it is very hard to get the right thermocol. Do you think it will be okay?
Did you need to calibrate the esc?
Su 620 receiver mein magnet servo lag sakta hai
I build taxi model and now i gone build this one ! Beautiful model !!!!!❤
Have fun!
@@3JWings Thx!!
Inspired me too much. I love the tool to shape the foam - What's the name of the tool?
I am planning on building a similar plane. Can you tell me the current weight of the rc plane? Great video!
I love your work, they are excellent. Could you try to make a Douglas DC-3 using this same technique?
what is the weight when ready to fly?
bro, what airfoil profile you use to make wing ?
Привет подскажите где заказываете детали?
8x20 motor 1s battery per bi motor heat ho rahihe mene plane banato liya 40sec fly kar paraha he bar bar motor demej horahe kiya karu
Awesome build....exactly what i need for my small park...Im gonna attempt, thanks 🙌🏽
Good luck!
what about wing span and flight weight?
thank,
I am so glad I am subscribed to you. This is a brilliant piece of work.
Thanks and welcome
Hello 3jwings, when I connect one of the motors to the esc, and then turn of the transmitter, the esc flashes quicky and motor vibrates and does not react to throttle control. Calibration problem? Could you please help me it would make my day🙏
Pleaseee. I also tested the esc with another brushed motor and it worked fine. It was a bigger dc motor and it was not coreless… help🙏🙏🙏
Is a great project amazing i will do it
Brother I make a f22 raptor
And I make 3s li ion battery and my plane wight is 950gram I think and I'm not try it are you think it can will be fly?
Test bro
@@teckmore306 I'm tested without landing gear and it is crashed 🥲💔
But I made another one but with landing gear and I will try today
@@teckmore306 it can't fly🥲
How much the flight time it gives
Nice toys for kids and good work
May i get full info of this??
Inspired 💪
very cool.. 🎉🎉🎉
great technique 👍, thanks
Formidable, j'ai beaucoup appris merci
Total weight of this plane with battery
Its really a nice model made by you
Que lindo, Parabéns muito legal 👏👏👍👍✈✈✈🇧🇷🇧🇷🇧🇷
Nice😊
Can you build rc plane for me
I have receiver and transmitter servo bldc moter and another accessories
WOW excelente video amigo, me gusta que armaste este avión sin tantos componentes electrónicos soy suscriptor, saludos desde México 🇲🇽 👍🏻
Thank you
Build video so relaxing, love it 😁
How can I adjust the CG point
Legal demais amigo vc, tem talento show 👍👍👍👍👍👍👍👍🤩😍
I want to buy this please reply
its work very nice without rudder
Yes, thanks
Bro it's I am from my pc account
What is weight of plane
And
What are dimensions of rudder plan me nahi hen
I’m impressed
Bro my motor run forward and backward with 20A brushed esc and not running fast with this
Bravo 👏 👏 👏 👏 👏
please make mini esc from old servo motor to make these types of mini airplanes
Plane ko banane ki total cost kitni padi?
Beautiful model, obviously made with great skill! It's pretty obvious that you're not a beginner - and it's a pleasure to see you work but I suspect most people beginning their model making journey would struggle to put this together!! It might be a perfect vehicle for NOOBS to fly but I suspect most NOOBS would struggle with its construction!
AMIZING
Fantastic work! I admire every ounce or hard work and dedication to your craft 😊🎉
Thank you so much 😀
Material details?
Nice video jonu sir❤
Wow amazing! 😊
Superb work
ขอบคุณมากครับ
nice
NICE
Can't expect better
Can I use 2s 350 mah instead of using power boost module
Yes u can but you have to adjust throttle curve for coreless motor
@@rohansailor5932 how to adjust it
Love from rajsthan ❤❤❤❤
Total weight of plane
A como los vende?.
Sweet :)
Can we make this model in 3channel
Its already in 3 channel
Aleron setup is awesome 💯
muito bom
Un placer ver tu video me siento identificado 15:03
Motar kitne RPM ki hai bro
Thermocol size sir 5mm
❤❤❤❤
❤
Can u share me airfoil structure bro .
Pake mesin apa itu....
Bro make 1s rc plane with bldc motor
Wow Bro ❤
632 good work. but, ailerons should extend TO the wingtips.
740 a bellcrank can be made from credit card-like plastic.
756 the lengths of the 'arms' of a bellcrank should be Equal. period. any Needed asymmetry should be accommodated at the servo arm and/or control horn.
832 the bellcranks should be located Near thirty percent of chord. in part because, a longer pushrod is a 'better' pushrod.
904 a control horn should be tall enough that it does not touch the flight surface at full deflection. thick trailing edges make more drag than thin ones do.
905 a pushrod should NOT have any unnecessary bends in it.
932 those things are not functional. there needs to be sufficient structural robustness around the hold-downs.
1113 if the butt of this type of motor is not supported when a prop is mounted, the end/brush assembly can be pushed out.
1405 the vert-stab is heavy, because it's taller than necessary.
the wingspan could be reduced; so that the span of the horiz-stab is equal to thirty percent of the wingspan.
Bro plan me rudder ki dimension nahi he 😊
❤❤❤buen video me gusto como ago una cortadora de poroplas que ocupo eso me ase falta
Puedes aser un video asiendolo el cortador del material para aser el avion
How much it costs to make a simple R.C plane ?
If you want to build this one i think its around 200$