Be aware of going into peoples homes with no one there. They can falsely accuse you of taking money or breaking items for $$$. Most people are good but it doesn’t take but one bad one.
I am so glad you agree and practice to break the R circuit instead of the Y circuit. Shutting down the whole system do to water or other issues is best to break R. Too many guys were taught to break Y and that does not solve issues if the drain is clogged, and the fan is still running.
Ummmm… if you break y you break the condenser and therefore you stop condensate production…as long as all standard wiring is followed and that’s how a lot of float switches tell you to wire them in so idk..I get why you would wanna break r…but “y” kill everything
@@tjlovesrachel And if the float switch fails? Stopping condensate doesn’t stop the condensate that’s already on the coil from being blown out. I’d rather the entire system be offline than just the outdoor unit. Why would you want the thermostat still calling for the blower fan to continually run. R is how they teach it these days in tech and trade schools. He does it the proper way.
@@Balticblue93 you’re right stopping the condenser doesn’t stop what’s on the evaporator already… but It certainly helps dry it out faster through convection and the moving air VS just dripping In stagnant air and it will also help dry out the soaked insulation In the unit VS just sitting there growing mold.
@@tjlovesrachel Well, regardless of who has more years of experience and certifications and Mechanical licenses, I can see your point, but that doesn't apply in my world. I live in a very arid climate, and we use humidifiers all year. I don't even know how one would get soaked insulation if the shut-off systems worked properly. I use two different water shut-off systems. I couldn't buy mold let alone grow it here. All my systems VCA blowers. Studying my Master Mechanical Contractor and certified in Manual J, D and S has given me a different outlook. Nothing stagnant around here. So it might apply to your area of service but not here. We will just go with a draw here.
Did you wind up verifying that the suction line was cold or if the system was cooling? I didn't catch it in the video after you noted it did not feel cold after the cap was installed.
Always only get a 440/370 VAC capacitor. Have to get away from those Jard's and run the Mars USA, I know they are the same company, but Jard is made in Mexico. Mars USA capacitors and contactors are made in the USA. But get the Mexico made Jard version as all they do is bring USA parts and use less costly employees, but Jard's have a pretty big failure rate lately. I only sell AmRad, Titan HD, TradePRO "GREEN". BMI, and a few others in passing. No Chinese / PRC made items in my trucks and vans. US Motors, Rescue motors and Evergreen is what I have my guy install. I even change out brand-new systems I install. I put in a different USA capacitor and contact and put the factory parts side for backup emergency replacement parts.
It is a shame that those China/PRC capacitors have caused so much trouble. It even hit the computer industry where cheap capacitors were put on motherboards and went bad. Power Supply companies now advertise quality capacitors from Japan in lieu of Chinese brands. I would be interested in knowing what you charge a customer to replace the run cap. One friend had her unit go out in the height of a heat wave in Phoenix and it cost her $450 , which included the service call.
@@jimcarpenter2623 I am going to respond to this question when I get to a computer as I have so much to say. There are two reasons I don’t use China based products. I support American businesses and I am sick of subpar products. I don’t know what Japanese products you are talking about. However, what I charge has 5-6 levels and options I offer. My price has a wide range based on what I do and how long it takes. Been back to you in a couple hours with real numbers and services I offer and not unneeded services. I promise to get back to you shortly.
@@JeffsHVACAdventures Fair enough, they are made in Mexico, but the failure rate is getting ridiculous, but most have turn coils with a fur coat and burning them up. That is why I buy the more expensive and USA made brands. I understand you aren't the business owner as I have the choice what is on my guy's vans and trucks. Jard is used in a huge pinch. When a new system is installed, we swap out the contactor and capacitor. So, we have a pile of brand-new units that can be given on our charity side of the business or used in a pinch. But I get it.
Man I hate those disconnects, very few go back in well but the vast majority I duke it out with. Gotta be thorough to avoid that beloved call back 😝. Nice one Jeff.
Well, it depends on what is made of or if you are wearing Flexifit or sort gloves. Both of my rings are real carbon fiber weave and do not carry current. I have a titanium ring, but if your hand gets smashed, you better get it off fast, because they cannot cut titanium off and they will have to take the finger. If you are wearing good gloves even with the coating, you won't ground out. Gold and Platinum are great sources for an electrical shock.
I like your work ethic! Keep it up!
Appreciate that 🤙
Nice work going the extra mile man! 👍
Thanks
I like that you consider 'the next guy', I've been that guy a lot of times.
Right on.
Thanks!
Thank you very much! Very generous of you.
Be aware of going into peoples homes with no one there. They can falsely accuse you of taking money or breaking items for $$$. Most people are good but it doesn’t take but one bad one.
Good tip!
I am so glad you agree and practice to break the R circuit instead of the Y circuit. Shutting down the whole system do to water or other issues is best to break R. Too many guys were taught to break Y and that does not solve issues if the drain is clogged, and the fan is still running.
Ummmm… if you break y you break the condenser and therefore you stop condensate production…as long as all standard wiring is followed and that’s how a lot of float switches tell you to wire them in so idk..I get why you would wanna break r…but “y” kill everything
@@tjlovesrachel And if the float switch fails? Stopping condensate doesn’t stop the condensate that’s already on the coil from being blown out. I’d rather the entire system be offline than just the outdoor unit. Why would you want the thermostat still calling for the blower fan to continually run. R is how they teach it these days in tech and trade schools. He does it the proper way.
@@Balticblue93 you’re right stopping the condenser doesn’t stop what’s on the evaporator already… but It certainly helps dry it out faster through convection and the moving air VS just dripping In stagnant air and it will also help dry out the soaked insulation In the unit VS just sitting there growing mold.
@@tjlovesrachel Well, regardless of who has more years of experience and certifications and Mechanical licenses, I can see your point, but that doesn't apply in my world. I live in a very arid climate, and we use humidifiers all year. I don't even know how one would get soaked insulation if the shut-off systems worked properly. I use two different water shut-off systems. I couldn't buy mold let alone grow it here. All my systems VCA blowers. Studying my Master Mechanical Contractor and certified in Manual J, D and S has given me a different outlook. Nothing stagnant around here. So it might apply to your area of service but not here. We will just go with a draw here.
yes it does solve the issue by cutting Y you stop the compressor and fan motor from doing it's job.
Nice job, Jeff! Good technicians always check everything. Saves a dumb call back and possibly a customer.
You said it! 🤙
Yessir Jeff. 9\11 I was a Senior in HS that day, I'll never forget it. Keep up the good work!
It broke in my hand(impact) 😉
Lol
Good find as always. Keep them coming buddy
Did you wind up verifying that the suction line was cold or if the system was cooling? I didn't catch it in the video after you noted it did not feel cold after the cap was installed.
Yea, it ended up coming around after 10-15 min.
Always only get a 440/370 VAC capacitor. Have to get away from those Jard's and run the Mars USA, I know they are the same company, but Jard is made in Mexico. Mars USA capacitors and contactors are made in the USA. But get the Mexico made Jard version as all they do is bring USA parts and use less costly employees, but Jard's have a pretty big failure rate lately. I only sell AmRad, Titan HD, TradePRO "GREEN". BMI, and a few others in passing. No Chinese / PRC made items in my trucks and vans. US Motors, Rescue motors and Evergreen is what I have my guy install. I even change out brand-new systems I install. I put in a different USA capacitor and contact and put the factory parts side for backup emergency replacement parts.
It is a shame that those China/PRC capacitors have caused so much trouble. It even hit the computer industry where cheap capacitors were put on motherboards and went bad. Power Supply companies now advertise quality capacitors from Japan in lieu of Chinese brands.
I would be interested in knowing what you charge a customer to replace the run cap. One friend had her unit go out in the height of a heat wave in Phoenix and it cost her $450 , which included the service call.
@@jimcarpenter2623 I am going to respond to this question when I get to a computer as I have so much to say. There are two reasons I don’t use China based products. I support American businesses and I am sick of subpar products. I don’t know what Japanese products you are talking about. However, what I charge has 5-6 levels and options I offer. My price has a wide range based on what I do and how long it takes. Been back to you in a couple hours with real numbers and services I offer and not unneeded services. I promise to get back to you shortly.
I hear ya brother. Most times, the Jard is what I use because it’s readily available to me.
@@JeffsHVACAdventures Fair enough, they are made in Mexico, but the failure rate is getting ridiculous, but most have turn coils with a fur coat and burning them up. That is why I buy the more expensive and USA made brands. I understand you aren't the business owner as I have the choice what is on my guy's vans and trucks. Jard is used in a huge pinch. When a new system is installed, we swap out the contactor and capacitor. So, we have a pile of brand-new units that can be given on our charity side of the business or used in a pinch. But I get it.
Man I hate those disconnects, very few go back in well but the vast majority I duke it out with. Gotta be thorough to avoid that beloved call back 😝. Nice one Jeff.
Nice work.
Do you train the new technicians in your company? If not, you should.
Yea. Most of the 1st years ride with me at least for a couple weeks.
Thx Jeff. Question: does wearing jewelry while doing electrical not concern you? Just curious. I don't even wear a wedding ring while wiring.
Not really. I’m cognizant of it and if I fear it will be a hazard, I take it off
@@JeffsHVACAdventures ok, thanks.
Well, it depends on what is made of or if you are wearing Flexifit or sort gloves. Both of my rings are real carbon fiber weave and do not carry current. I have a titanium ring, but if your hand gets smashed, you better get it off fast, because they cannot cut titanium off and they will have to take the finger. If you are wearing good gloves even with the coating, you won't ground out. Gold and Platinum are great sources for an electrical shock.
Likewise i never wear any jewellery or even a watch, just a habit I got into many moons ago just to be extra safe.
Or as another UA-camr put's it What's "The Big picture"?