Brother TN-660 Gear Reassembly (Toner Cartridge)
Вставка
- Опубліковано 20 кві 2017
- I took a new cartridge apart to look at it and couldn't put it back together to make it work. I spend about two hours figuring out how the gearing works on these and I believe I figured out the way these girls go back together.
- Комедії
I have watched several videos of tonner, cartridge , gears assembly etc. But this demonstration/ video is unique, well explained by step by step explanation with caution, proper assembly or adjustment to the point. James - Well demonstration, performance great job. 😄👍 😆👍😀 😂
Perfect. Thank you. I noticed that my TN-660 was just like yours and, prior to finding this video, the spring came off and I had no idea exactly where it sat. (I'd already figured out the gear sequence and alignment.) Your video helped show me how to reassemble, so that the spring was properly placed and armed.
Excellent instruction! I've reset three cartridges accumulated in storage. After removing the right hand cover, I only loosen the left side enough to lift the gear interfacing with the D-gear allowing me to turn the D clockwise until it's an upright "D". Then I complete the task as you've described, but add the part of turning the final big wheel counter-clockwise slightly 'til it lightly clicks in place. Thanks to you & Cerberus's comment, I'm back in business.
I am stuck at the same point. Printer still says Replace Toner. When you say you turned this gear counter clockwise by 10 degrees, which gear do you mean? Is it the one that he put in last? When to you turn it counter clockwise - after putting the cover or before?
@@dafpnp Yes, the last gear and after the cover is on.
@@dafpnp The last gear and after putting the cover on.
I tried about 6 times and also turned the main gear counter clock wise slightly(it clicks) did this a few times as well. It finally worked. I just printed around 150 copies for a mailing. Copies look great have another 150 to print. THANK YOU SO MUCH!!! saved me $60. I would have never figured out the spring or the tab to saddle part.
I used to do the tape trick on the older model that worked also. Thanks again for taking the time for figuring it out.
I am stuck at the same point. Printer still says Replace Toner. When you say you turned this gear counter clockwise by 10 degrees, which gear do you mean? Is it the one that he put in last? When to you turn it counter clockwise - after putting the cover or before?
James,
Thank you. I have never refilled a toner cartridge before and your video allowed me to get it done in 10 minutes.
This video has been around for 6 years and it's still helping people! Thank you for this video. Not sure why the toner cartridge needs a stop gear. We all know when we're running low on toner - you can literally see it on the page you're printing. It's hard not to think it's a cash grab.
THANKS!!!! You just saved me those couple of hours you spent figuring this out. None of the toner vendor videos have caught up to what appears to be an updated cartridge design.
thank you for this. all the videos I saw had the different style of gear.
I had the same issue as the other guy. When I first tried this, my printer would still say that I was out of toner. The trick to making this work is that once it's all screwed back together, the main gear needs to be turned counter clockwise until it clicks.
after I did that, I was able to successfully refill several toner cartridges.
Helpful bit of advice. Thanks!
It's been 11 months since I did this and I had to refill again, forgetting this critical step. I'll underscore Cerberus' comment as I saw exactly the same thing. When I reassembled the last gear exactly as shown in the video, my printer still gave an out of toner error. To get past this, I turned this gear counterclockwise just a small amount until it clicked (maybe 10 degrees or so). At that point, the cartridge no longer read as empty.
Essential final step in getting printer to recognize "new" cartridge! Excellent video above still gave me "no toner" error until I saw your comment. Now works perfectly - thanks!
Nice addition... Thanks to your comment & James' video, I've reset three of these now.
@@tlfromva I am stuck at the same point. Printer still says Replace Toner. When you say you turned this gear counter clockwise by 10 degrees, which gear do you mean? Is it the one that he put in last? When to you turn it counter clockwise - after putting the cover or before?
Excellent. Your assembly is what I followed step by step & it worked. I was able to get more copies out of my toner cartridge.
From a lit teacher: your explanation is detailed and easy to follow; much obliged.
Thank you so much for making this video. I was in the middle of repairing and 10 people came by...phones ringing...it saved my day....
Thank you for the detailed step by step instructions for this. My company uses several of these a month.
Thank you. You saved me. I have done this before but the current TN660 I have is like yours. Bravo. Excellent video.
Wow, worked perfectly after the counter clockwise rotation of the last gear mentioned in the comments. Thanks
Excellent instructional video. I followed the instructions, then read the Comments where I read about turning the timer gear CCW until a click is heard. I did that and all's well! Thanks!
Thanks! I thought I would have to buy a different cartridge, but now that I found this video, it worked!
Very helpful as most videos show a older setup. Thanks much
You are a total scientist!!! Worked perfectly. I tried the key pad press combo but that no longer seems to work for my printer. However, setting the gear just right - exactly as you demonstrated works. The gear just has to be in that sweet spot. Even if it is in the correct position it may need just a bit of a nudge once installed if the no toner light comes on. Thank You!
I didn't expect "scientist" but I"ll let it soak in a little anyway. Thanks and thank goodness for UA-cam!
Thank you so much. Worked like a charm for me.
My god I can't express how much you've helped me I truly appreciate your video and in depth process of showing us where things go and how they should look. Also after I did that to my toner I went on my DCP-L2540DW and hit the menu button on the printer and went to general setup and scrolled to number 4 replace toner and hit continue on it so that it would allow my printer to continue printing because when I tried it without doing that step it wouldn't allow me to print and kept giving me the replace your toner dialog but after I did that I was able to print so I thought I'd share that if any of you guys had a similar hiccup like I did. Again I really do appreciate you video and explanation. :)
Banipal Somo. I don't understand why out worked for me not going thru that step but it'll likely come useful for me and others. So great addition for everyone to try of needed. Thanks Benipal!
I made a screenshot of your reply so I'll know what to do if I encounter the I same problem error.
Thank You for the instructional. I believe you got it right as it worked the first try. I wish you would refill the toner for us also.
thank you very much you're a life savior!!! excellent vid!
Excellent!!!! Help me a lot to reset my TN-630
Dude! Great info. Thank you!
Absolutely gobsmacked... works perfectly after finding this. Very excellent job my friend. I have a TN-630 and it's exactly the same process because Epson is evil and makes two cartridges for these printers.
That was great. Long video but packed with useful info so well done. Good camera shots but a couple spots could have used some brighter light but that aspect didn't keep me from reassembling these gears. I was very close but the parts about aligning the D and the placement of the spring made me confident that it was done properly. My thumbs up that I thumbed is a "Party Thumbs Up" which is 25x more "P" powerful.
Thank you so much works perfect
Outstanding. Also works for a Dell E310dw cartridge (cartridge part number P7RMX).
GREAT VIDEO!!
Only video in existence for this specific cartridge!! All others that say its for this cartridge do not apply!
hmm...I wonder if I will have the same issue next time. I tried twice now and didn't have any problem. Well, either way for future viewers. Thanks for the comments. I will make and post a new video next round if I have that problem.
Hi james.
Just followed your instruction and it worked out perfect. So so glad. Now a video for refilling the toner please😉😉
Thank you very much for your video, i have same problem. because of you i save money. Thank you again.
thx works great
thank you
thank you you saved my life, this helped when i needed to refill my newer brother cartridge
Leroy Trujillo ..I have learned so much from UA-cam! Any time I can repay what I have learned I'm happy to do it! I'm glad it helped and you are smart enough to get through my novice video making.
it was more than perfect, have a good one take care. Ps dont buy any more cartridges, now you can buy toner and refill it. You already figured out the hard part.
I have to refill again and followed the directions, did the d put the little thing inside the saddle, had the cover fit into the gear like a key and doest want to rest on the printer. it keeps says replace toner. i did it the first time now it doesnt want to do it again.
Leroy Trujillo
so you got to work one time, but it doesn't work 2 times? make sure the spring is in there correctly.
Leroy Trujillo. I put two together and both of them worked for me. like I said in the video I just gave it my best guess and it works for me so hopefully it works for other people.
You saved me time and money. I’d like to buy you a 🍺….
I just did all this step by step, but only wanted to trick the printer into letting me extend the life of the toner cartridge. I decided to take off the toner replacement side and noticed the bottom gear was missing (not there). This is weird. The printer now shows "put cartridge back in" on the screen even though the cartridge is in. Anyone have this problem?
can you also show how to reset toner tn-436y please thank you
thanks but mine is still saying it needs replaced still
I hav problem wit cartage powder sticking to rollers
PLEASE ANSWER ME! Where can I find a special gear wheel? Do you have a sales link? then we need to make holes and pour dust. isn't it ?
I have not done any looking for a special gear wheel. Your Search is as good as anything I can find.
@@jrichhart i found in aliexpress. Thank you so much.
I bought the gears on eBay I pay $6 for them.
@@androidtvbox_01 1.5$ on aliexpress
Si lo hago exactamente así, me marca reemplace toner.
Here ya go. Found a printer manual for this printer at the address below. Not sure if this would be of any interest, but perhaps it explains how the cartridge works in the printer: support.brother.com/g/b/manualtop.aspx?c=gb&lang=en&prod=mfcl2740dw_us_eu_as
On the gear that has the stopper tab, Why not just cut it off flush with the gear train? No more stoppage, or orientation concerns.
I will give it a try! Did you try that?
James Richhart Next time I have mine apart I think I will. My toner hopper/reservoir cover seems to have a small hole, and I was more concerned with fixing that and getting it back together. I finally used a small o-ring. I did do the “ D “ orientation that .you suggested though. I didn’t have any springs to contend with on my toner cartridge.
Thanks for the video it was helpful.
stop moving the camera, get my eye dizzy !!
Old eye make video stable because head moves with shaking motion...look stable to me!