I don't get the Oakley thing but you did an awesome job! For others who want to do a themed jeep this would be a terrific how to video. Very nice jeep!
Holy crap, watching this now in 2017 I am still amazed by some of the things you've done with your jeep! I definitely envy the Oakley theme throughout the jeep. Especially the overhead controls. Just pure amazingness.
Nicely done. Great job on stacking up on the emergency essential. So many people forget about these things, especially; if you are stuck in the back country. Great job on the jeep. thanks for showing, joe from utah
I can't understand why you would plaster Oakley's logo all over it, but to each his own. The jeep is very well done, you should be very proud of it. I too am surprised your not getting interaction between the two antenna. 73 from Cleveland.
Great job Eddie, it looks like you've been quite busy fixing the Oakley Jeep up even more since we got to hang out on the causeway with the Caloosa Jeepers. Really clean installations, and well thought out too.
Hey man this project made me fall in love with computers and I ended up studying finishing a computer science degree. I'm currently in the middle of building one of these systems for my car, using an Intel i5 computer. I'll be posting it on my channel here once I get it done. I'm from Florida, would love to show you it some time.
Sticking a lot of add ons in a vehicle is one thing, but doing it as clean and well engineered as you have makes this Jeep a cut above the average vehicle hack. Very impressive.
Amazing! You have built my dream Jeep. Just bought my first JK 2 months ago and first thing I wanted to do is figure out a water system. Hoping it's ok if I use your idea. When I saw that inverter plug on the back door I was hooked! Thanks for sharing!
Oakley isn't my thing but your attention to detail is awesome! really impressive built and I like that ya didn't do some totally impractical lift on it. still a totally practical truck.
One other idea you may consider. Lining your rear shelf for your windows with felt to prevent scratching. I love the overhead console. I have a two door Wrangler and would love the extra space for a full size CB. Please post a vid describing the construction of the console. Doesn't have to be super detailed, but basic design and construction would be helpful. Thx
Bad ass jeep. Only thing I'd change is go a lil higher. Jeep looks like it was built smart and very capable! You must enjoy going on adventures or spending money and imagining you do haha
A lot of people are asking about the rear view mirror but I'm thinking that there is a lot of windshield that is not usable. I know a few states that won't even let you hang a GPS or phone in the center of the windshield as it blocks too much view. An accident may be challenged as caused by limited visibility. Even with these concerns it is a nice and clean install.
DAMN, that a hell of a nice Jeep you've got there!!! May I suggest, for your Oakley door sill, might wanna put a laser cut, polish stainless steel, sill with Oakley cut in it.
That's really nice you have all the gadgets ready for when hell comes rolling down the trail. All I think you need now is small portable cooling compartment for food and maybe a gas powered mini stove and you got a survival unit. I have to ask with all that stuff you have to have a beefy battery and a 200 amp alternator right?
you are one lucky man. this is the most incredible jeep i ever saw in my entire live. unbelivable. how much/long did you take to build this master piece?
I love the control overhead control ctr but, is it waterproof so you can take off the top? If so did you record how you made it so we can do our own or are you willing to make others to be sold?
I look up to what you just did there. That is what i call creativity and engineering. I love every aspect of your jeep. What happens if you have the top down and it rains or if you get water inside the cabin? Also, how much did all your aftermarket parts and things that you did your to your jeep cost you? Much appreciated!
I'd love to see how your overhead console is put together. You have some serious fabrication skills. How big are the portholes in the E-Autogrilles bumper. If they are 2.5" holes I know a light that will fit perfect. Great looking rig man. \m/
I'm a big fan of jeeps with gear and I would like to know if someone were to pay you for everything you have in yours how much would it be in total ? Please answer back
The intake horn is positioned in a way that if you ever have water high enough to enter the engine through the intake, it's likely already entered the engine via a vacuum tube etc. not to mention the fact that a snorkel won't protect your transmission/transfer case. I'd say save the money and invest it elsewhere. But that's just my .02.
Hey Ed, Great work! Lots of talent. Please, you mention that your inverter has enough power to take off the lug nuts, what are the specs on the inverter and what lug nut driver are you using that can REALLY take off tightened nuts?
Do you have a write up on the rear spot light , or any of this equipment for that matter ... I would be interested to see how some of this is set up ...Would make Nice additions to an expo/ adventure style rig
JKs are widely known to clear and stuff 35s with 2.5" of lift. Bear in mind that the Rubicon comes stock with what measure out to be 33s. OP - I like everything about your rig apart from the whole 'Oakley Edition' thing. Unless you work for Oakley and/or they're paying you to advertise, there's 0 point to it and it looks beyond tacky. Then again, it's all about personal preference. Good on you for doing something different, even if it goes against the grain of what most everyone else thinks.
By far one the coolest jeeps I've ever seen. mostly because all the stuff is what you did and wanted.
I don't get the Oakley thing but you did an awesome job! For others who want to do a themed jeep this would be a terrific how to video.
Very nice jeep!
Holy crap, watching this now in 2017 I am still amazed by some of the things you've done with your jeep! I definitely envy the Oakley theme throughout the jeep. Especially the overhead controls. Just pure amazingness.
You need to build and sell the overhead consoles. I would buy one in a heartbeat..and so wouldn't many of my friends!! One smart guy you are !!!!
Nicely done. Great job on stacking up on the emergency essential. So many people forget about these things, especially; if you are stuck in the back country. Great job on the jeep. thanks for showing, joe from utah
This has got to be my favourite jeep.
I own one myself but this one is impressive, the water in the bumper, the air and the outlet is outstanding.
There is a special place in jeep heaven for people who have these skills! Great job! I would be happy with having any one of these mods on mine.
Not a big fan of Jeeps, but damn this setup is so neat and clean... Very very good job!
I can't even begin to describe how badass and how badly I want that. Well done well done, that is one unique and amazing jeep
Money does buy Happiness
Sickest Jeep I've seen in awhile.
What dashboard on torq do you use?
Your jeep is AWESOME man, I love the technology and features you incorporated into it! Its wicked cool!
Your Jeep is SICK! You're giving me so many fun ideas for my Jeep!!
I can't understand why you would plaster Oakley's logo all over it, but to each his own. The jeep is very well done, you should be very proud of it. I too am surprised your not getting interaction between the two antenna. 73 from Cleveland.
Great job Eddie, it looks like you've been quite busy fixing the Oakley Jeep up even more since we got to hang out on the causeway with the Caloosa Jeepers.
Really clean installations, and well thought out too.
Just wow. Very nice and love that you did most of it yourself.
Dude, I freaking love that overhead console! I think I'm going to build one for my YJ now.
That little shelf for the windows is brilliant!!
U went all out on this one. All the little details look great
That's just the danged coolest Jeep I've seen, short of an AEV Brute! Nice work, and very creative! Bravo!
Absolutely perfect ! If I could build myself the perfect Jeep yours would be it. Great job man. Thanks for sharing all the great ideas ! PEACE
Man this is one of the sickest Jeep's I've ever seen!!! If it were mine, i'd never sell it. So cool.
pretty sure i saw this jeep when i was in florida a couple years ago. absolutely love it!
Hey man this project made me fall in love with computers and I ended up studying finishing a computer science degree. I'm currently in the middle of building one of these systems for my car, using an Intel i5 computer. I'll be posting it on my channel here once I get it done. I'm from Florida, would love to show you it some time.
Dude! You really take it to the next level. Well done.
Sticking a lot of add ons in a vehicle is one thing, but doing it as clean and well engineered as you have makes this Jeep a cut above the average vehicle hack. Very impressive.
Very cool! Love when people make a jeep their own. Nice job!
I wrote that comment halfway through the video. As I continue to watch I have to say holy shit!! Bad ass!!!!
really nice jeep man, all the little details makes it unique! I am an FJ guy but looking to steal some of your ideas!! great eye for design!
I like some of the stuff you did... really nice job.. you obviously know what you doing..
Just gave me idea's on how to into grate my Ham, CB, and Tablet for torque! Well played sir, well played!
Amazing! You have built my dream Jeep. Just bought my first JK 2 months ago and first thing I wanted to do is figure out a water system. Hoping it's ok if I use your idea. When I saw that inverter plug on the back door I was hooked! Thanks for sharing!
Amazing Job! ... Perfection at its finest well done brother....
This Jeep is awesome...deserves a better lift than 2.5 though...really good job on the interior toys...I want the overhead!
This Jeep outfitted to live in, great job
It's like an automotive wet dream. And all your work looks factory fresh.
Genus! Absolutely AWESOME! Teach me the way of the Tec, Master!!!
Your like the human Swiss Army Knife!
very impressive, your ideas are original and functional, soon you'll have to beef up the suspension to compensate for the weight... very nice job.
your jeep is insane dude great job
Oakley isn't my thing but your attention to detail is awesome! really impressive built and I like that ya didn't do some totally impractical lift on it. still a totally practical truck.
This is the most beautiful thing I have ever seen.
This is the coolest jeep I've ever seen. So well done and I'm copying everything xD
That's one bad ass setup you got nice job thanks for sharing
One other idea you may consider. Lining your rear shelf for your windows with felt to prevent scratching. I love the overhead console. I have a two door Wrangler and would love the extra space for a full size CB. Please post a vid describing the construction of the console. Doesn't have to be super detailed, but basic design and construction would be helpful. Thx
I am a YJ fan but this is awesome! ! Nicely done.
youve got the greatest jeep ever, keep up the good vids!!!
Dope! I love the theme and it was perfectly executed!
STUNNING, Absolutely STUNNING. WOW! +Eddie Zarick
I really like the idea of your overhead console
I hope someone at Oakley bought it. Nice job on the build.
Bad ass jeep. Only thing I'd change is go a lil higher. Jeep looks like it was built smart and very capable! You must enjoy going on adventures or spending money and imagining you do haha
So you wanna come over and work on my jeep next? That's a beautiful set up, I love it!
A lot of people are asking about the rear view mirror but I'm thinking that there is a lot of windshield that is not usable. I know a few states that won't even let you hang a GPS or phone in the center of the windshield as it blocks too much view. An accident may be challenged as caused by limited visibility. Even with these concerns it is a nice and clean install.
That thing is sick man! im a sucker for orange as well
coolest jeep i have ever seen!!!! good goin man!
absolutley phenomenal job man.
Crazy Interior! Love it!
DAMN, that a hell of a nice Jeep you've got there!!!
May I suggest, for your Oakley door sill, might wanna put a laser cut, polish stainless steel, sill with Oakley cut in it.
Dude your jeep is on another level congratulations...Whens the pop-top bed being installed??
That's really nice you have all the gadgets ready for when hell comes rolling down the trail. All I think you need now is small portable cooling compartment for food and maybe a gas powered mini stove and you got a survival unit. I have to ask with all that stuff you have to have a beefy battery and a 200 amp alternator right?
Super nice setup man.
I like the setup too... very nice but what about the Rear View Mirror??
Nice job. Very interested in how you made the buttons on the overhead console.
wow..this is awesome!! Can you give a run through of the wiring for the water pump? I ordered mine today!!
Eddie,
Have you given any thought to incorporating solar technologies into the wrangler to help run or charge your accessories?
Dr VinnyG Solar panels are pretty much just a conversation piece on a vehicle, they don't do enough to make it worth while
Awesome!! You should make a video with your radios and stuff. I'd like to see that! As a fellow Ff of course!
you are a crazy genius, well done!
the real question is how much did it cost you..... roughly
That's pretty cool. A little much but I think I'd still want it all.
you are one lucky man. this is the most incredible jeep i ever saw in my entire live. unbelivable. how much/long did you take to build this master piece?
I love the control overhead control ctr but, is it waterproof so you can take off the top? If so did you record how you made it so we can do our own or are you willing to make others to be sold?
Unbelievable rig man!
I'ld like to know more about the exterior power inverter, is there a write up and what equipment did you use. Great stuff, thanks.
I look up to what you just did there. That is what i call creativity and engineering. I love every aspect of your jeep. What happens if you have the top down and it rains or if you get water inside the cabin? Also, how much did all your aftermarket parts and things that you did your to your jeep cost you? Much appreciated!
This is amazing! You could start a very successful business doing this
Holy cap you have that thing LOADED that's fricking awesome
I'd love to see how your overhead console is put together. You have some serious fabrication skills. How big are the portholes in the E-Autogrilles bumper. If they are 2.5" holes I know a light that will fit perfect. Great looking rig man. \m/
I'm a big fan of jeeps with gear and I would like to know if someone were to pay you for everything you have in yours how much would it be in total ? Please answer back
The intake horn is positioned in a way that if you ever have water high enough to enter the engine through the intake, it's likely already entered the engine via a vacuum tube etc. not to mention the fact that a snorkel won't protect your transmission/transfer case. I'd say save the money and invest it elsewhere. But that's just my .02.
Hey Ed,
Great work! Lots of talent. Please, you mention that your inverter has enough power to take off the lug nuts, what are the specs on the inverter and what lug nut driver are you using that can REALLY take off tightened nuts?
are your neighbors calling you "batman"? you already have the batmobile :))
Great workmanship !
Is there any chance you might show how your cargo lid fits together into the back of the jeep!?
Man u are amazing good job am gonna get a jeep and am definitely will need ur help
and I thought my Jeep was amazing. This is incredible!!
so you don't have a rearview mirror?
Beautiful Jeep
Very nice Jeep. Can you tell me which Tailgate Table Top that is? Thanks!
Do you have a write up on the rear spot light , or any of this equipment for that matter ... I would be interested to see how some of this is set up ...Would make Nice additions to an expo/ adventure style rig
Thats awesome any advice into how to go about the computer and wiring the tablet into your ride?
CAN YOU SHOW HOW U DID THE INVERTER ON THE BACK SETUP AND SHOW EVERYTHING U USED PLEASE?
I was wondering what that radar emitter is called and is there a brand I would like to buy one
i like oakley gear, but you took it to the next level
JKs are widely known to clear and stuff 35s with 2.5" of lift. Bear in mind that the Rubicon comes stock with what measure out to be 33s.
OP - I like everything about your rig apart from the whole 'Oakley Edition' thing. Unless you work for Oakley and/or they're paying you to advertise, there's 0 point to it and it looks beyond tacky. Then again, it's all about personal preference. Good on you for doing something different, even if it goes against the grain of what most everyone else thinks.
Your jeep is bad ass!! 😍😍. It's zombie ready!!
i had a tear running down my face when saw this video....... this is fucking awesome
Jeeps are not my thing but you did a great job, very nice.
Beam me up Scotty! cool Jeep Bro. Has it seen any dirt?
wooow just amazing , people have Ferrari's as dream cars , your jeep is my dream car.
That is the most bad ass jeep I've ever seen I think I'm getting a jeep now instead of a truck lol I live in Texas
LOVE IT MAN! Thats amazing!!!!
Do you own stock in Oakley? Why would you spend so much time and money to advertise for Oakley if you get nothing out of it?
I had never bought a pair of Oakley's until last year, they're amazing. But he must truly LOVE the company.