PRIUS 2ZR COLD START MISFIRE BLOWN HEAD GASKET 2010-2015

Поділитися
Вставка
  • Опубліковано 22 лис 2020
  • FINANCING AVAILABLE
    NO CREDIT CHECK NO INTEREST 100 days.
    Click to apply:
    consumer.snapfinance.com/#/?m...
    Call or text 209-305-1672 or 909-203-0848
    Text HELP. 209-305-1672
    CHICAGO AND SURROUNDING
    DALLAS AND SURROUNDING
    SAN DIEGO
    KANSAS CITY
    PHOENIX
    LAS VEGAS
    (ALL OF CALIFORNIA)
    Los Angeles areas
    San Francisco Bay Area,
    San Jose,
    Sacramento, Stockton,
    modesto,
    Merced,
    Fresno.
    Bakersfield
    Shaking and knocking prius/Ct200h every morning.
    CALL US. WE’LL FIX IT THE RIGHT WAY.
    2ZR HEAD GASKET REPLACEMENT.
    FIX IT BEFORE IT IS UNFIXABLE
    P0300 p0301 p0302 p0303 p0304
    WE SERVICE:
    Text HELP. 209-305-1672
    GASKET MASTERS
    209-305-1672
    This video will show you every reason you need to replace your Prius 2ZR cylinder head gasket.
    Resurfacing not covered in video, but recommended.
    Prius overheating
    Prius misfiring
    P0300 P0301 P0302 P0303 P0304
    Prius milky oil
    Prius no start
    Prius losing coolant
    Prius timing chain how-to
  • Авто та транспорт

КОМЕНТАРІ • 50

  • @derekthomasgriffin
    @derekthomasgriffin 3 роки тому +4

    I watch all your videos as soon as they’re uploaded. I’ve learned so much from you and I’m diggin the vibe around you fellas. Thank you for ignoring all the stupid sh going on and keeping these videos coming, you guys are the best!!
    I’m willing to bet you would benefit from a Facebook group where people of like minds could join and converse. It’s really easy to create a group and sometimes they can take off. With these head gasket jobs you teaching us a lot of information, not just a head gasket repair. With this much to offer I’d love to see a group page of you guys!
    If you’re ever down here in San Diego in the Lakeside I would love it if you guys would autograph my engine!! 👍 🏆
    -D Griffin

  • @DannoThorne
    @DannoThorne 3 роки тому +1

    Hey guys -- today was BY FAR the best service experience I have ever had before, across *any* industry. The level of trust Walt established with me is incomparable. Troubleshooting was 100% accurate. He came prepared with everything needed for a successful job. The work was done quickly, accurately, with quality workmanship, and affordably priced. If you're either uncomfortable or lack the time/tools to follow the videos & do the work yourself... without reservation, I recommend Walt and Gasket Masters. I'm blown away. He just set the bar and is *the best* at what he does.

  • @automechanicc
    @automechanicc 9 місяців тому

    My pressure tank was low on coolant. Needles to say cylinder 1&2 plugs were wet and lean. 3&4 looked good. Time to take the head off 😢. Thank you for your video.

  • @BimmerShedNI
    @BimmerShedNI 3 роки тому

    Hi, if the engine HG goes bad and piston rod has said hello to a daylight could a different/better engine fit a existing model?
    For example would a 3rz fit in 2rz place? Or maybe some parts could be swapped from other engines to improve reliability?...

  • @mikeself
    @mikeself Рік тому

    Do you guys ever deal with the GDI 2006 GS300s? Mine has a cylinder 4 misfire on cold startup, but clears up once it reaches operating temp

  • @Adam-oo7tn
    @Adam-oo7tn 3 роки тому

    are u guys planning to open up or travel to Tennessee sometime? Would love to have a good mechanic like you all around. will never go to the dealer for a HG replacement.

  • @Retro.Nostalgia
    @Retro.Nostalgia 3 роки тому

    Doing coils and plugs on a 13’ Prius today. Customer symptoms are basically the same, upon some cold starts there’s a misfire on cylinder two, occasionally happens when driving. Possibly the head gasket? I understand they swell to fill gaps when the engine heats and sometimes problems aren’t seen until certain heats or whatnot

  • @Bromon655
    @Bromon655 2 роки тому +1

    Had this exact thing. $5k engine replacement 👍

    • @gasketmasters
      @gasketmasters  2 роки тому

      Ouch. We charge roughly half that

    • @wjhpoolplayer
      @wjhpoolplayer 2 місяці тому

      ​@@gasketmastersHalf of that? Total charge with the cost of the engine and everything? New engine or rebuild? Sorry I'm brand new to your videos...

  • @jdmfans6078
    @jdmfans6078 3 роки тому

    how to diagnose a blow head gasket? a leak down test would tell me if the gasket is blown? thanks 👍

  • @jacquelynbritz5062
    @jacquelynbritz5062 2 роки тому

    We have the same sounds coming from a 2012 pruis scan said it was the coils we swapped them put same issue I'm assuming it's the head gasket do you have a shop close to burlingame California how much does this normally cost to fix and is it worth it thank you for your time

  • @cop763
    @cop763 3 роки тому

    hi my prius 2009 has done the same noise 2/3 times 3 weeks ago but no engine light on and its not doing this noise any more since then does still its gas kit gone ? can you plz help me in this regard

  • @Drew2012123
    @Drew2012123 3 роки тому +1

    I live in the Baltimore Maryland Area, Need Reconditions in this Area to find and place to replace mine on a 2011 Prius. Wish I was out there. Warmer there. LOL

    • @ZBrink11
      @ZBrink11 3 роки тому

      Try going to the JDM in Baltimore. They probably know of someone who can do an engine swap.

  • @ShahGAutos90
    @ShahGAutos90 3 роки тому

    Engine rebuild or swap cost for Gen2?

  • @ReDrive89
    @ReDrive89 2 роки тому

    Do you find something in common between those engines that failed the HG ? Like mileage, have they replaced water pump or did they had water pump failed. Except for overheat and misfire is there other symptoms of HG going bad? Here we have a taxi company running E180 Corollas and the guy said they run for about 650k km so far without any issue .They just replace the water pump every 200k km. They have blown 2 engines because of it.

  • @wrozay
    @wrozay 3 роки тому +2

    So Prius engines blow up, very reliable

  • @calfeggs
    @calfeggs 3 роки тому

    could probably do a jb weld patch job, and slap it back together and get a few more miles out of it.

  • @aslanbey460
    @aslanbey460 3 роки тому

    How often head gasket should be replaced? And how do know that it is thime to replace head gasket? Some people say that is because of water pump failure. Could you please explain it to me?

    • @gasketmasters
      @gasketmasters  3 роки тому +3

      Each Prius is different. Typically 150k.
      Water pump usually fails on these engines due to running dry because of head gasket failure. Rarely do they fail before the head gasket fails.

  • @quacktony
    @quacktony 3 роки тому

    Hey guys, I plan to reseal the oil pan but looks like the 2nd bottom half of the engine uses some sort of FIPG. Is it possible to pull that off w/o removing the engine from the car?

    • @gasketmasters
      @gasketmasters  3 роки тому

      You need to remove the engine. You can do it without removing the engine but you still need to disconnect the engine from the transmission because the alignment pins will prevent you from pulling it away.

    • @quacktony
      @quacktony 3 роки тому

      @@gasketmasters thanks, Happy Thanksgiving

  • @dailynonsensetv6128
    @dailynonsensetv6128 3 роки тому

    Clean egr valve and cooler and inlet manifold with PCv valve then see if any difference

    • @gasketmasters
      @gasketmasters  3 роки тому

      EGR is closed until ECT reaches 185 degrees.
      So no.

  • @AcousticGroove56
    @AcousticGroove56 3 роки тому +1

    Any preventive maintainance advice? I have no issues so far. 2010 with 186k. Burns at most a quarter of a quart between 5k changes.
    Thanks.

  • @kashkaaniaspen5799
    @kashkaaniaspen5799 2 роки тому

    The problem with this is there is no way to tell if we the ppl can trust mechanics in our area...... HELP PLZ

  • @victorramos1839
    @victorramos1839 3 роки тому

    Do all prius have this problem with the head gasket or is it certain years only?

    • @wrozay
      @wrozay 3 роки тому

      Gen 3 (2010-2015)

  • @yoeuychhung8219
    @yoeuychhung8219 3 роки тому

    where can I find a good mechanic like you guys in the Mass!

    • @gasketmasters
      @gasketmasters  3 роки тому +3

      We will have a lot more places opened up nationwide within the next couple years

    • @reocam8918
      @reocam8918 2 роки тому

      @@gasketmasters any updates?

  • @jafinch78
    @jafinch78 11 місяців тому

    This is like teletherapy, this month, it's gonna happen.

  • @juancampos8874
    @juancampos8874 2 роки тому

    Hi I live in bay area mi car start shaking it's a Prius 2010 only on start and low speed like to know like how much cost to fix

  • @stivefrechette1417
    @stivefrechette1417 Рік тому

    je recherche un moteour pour prius 2012 car jai le meme problème missfire cylindre 2

  • @gtahalestorm7583
    @gtahalestorm7583 3 роки тому

    how much ?? i live in 209 modesto

  • @jmdonasc
    @jmdonasc 3 роки тому

    How much you guys charge for 2012 prius?

  • @iaroslavlysenko8621
    @iaroslavlysenko8621 3 роки тому

    How Mach change?

    • @gasketmasters
      @gasketmasters  3 роки тому

      Depends on where you’re located. Or if you’d like to come to us.

  • @fikfi891
    @fikfi891 3 роки тому

    its cause from missfire?

    • @gasketmasters
      @gasketmasters  3 роки тому +1

      No. It’s caused by coolant leaking into the cylinder from leaking head gasket.

    • @fikfi891
      @fikfi891 3 роки тому

      Gasket Masters oh ok.. thanks info... do you sell part prius for examplle water pump and compressor gen 3 model?

  • @paulie5076
    @paulie5076 3 роки тому +1

    So it's a 3 cylinder 🤭 it'll get better fuel mileage 😄......