Beautiful work Doug! I built the AMT Peterbilt cabover many years ago and the cab mounts were fragile and the cab never set right on them. I am glad to see that the Revell kit did not have that issue. Thanks for sharing this.
Appreciate the build info! A few corrections other than the incorrect engine color and the whole Optimus Prime bit(yep, Freightliner FLT cabover), the turbo......compressor side is correct painting it aluminum; however, the mid-section and exhaust side should be either steel or rust(from heat), aluminum is not used as it won't withstand the heat. The steering box, arm and draglink should be painted chassis color at they were painted as a complete assembly with the frame on the assembly line. The air intake pipe should protrude above the top of the cab around 3-5 scale inches(though it would be obscured some by the ducktail spoiler that was optional) on the flat-top cabs, it puts the inlet into the airstream to draw cool air into the engine through the filter can(which is either painted body color or a simulated polished stainless finish). I base these comments on having been around these trucks for 44 years and 2 million miles driven personally.....keep up the good work!
Last bit of info....the accesdory drive on the left side of the engine(air compressor, fuel pump) is assembled and painted the same engine tan as the block....
Just to let you know, at the most, the rear of the truck will only have license plate, not three. I’m a retired trucker and actually had one of these trucks. Multiple plates go on the front, although in modern trucking, there is usually only one license plate. They use IFTA stickers, honored by all states.
Nice job Doug, I'll have to look for this kw-100 kit. I have the Revell kw-123 kit in my stash and they kind of look the same.I really like watching your vids, Keep up the great work and happy building.
Have this one in my stash waiting to be built. You're right about the cabover kits being difficult to have line up correctly. The amt white freight liner kit gave me some troubles
Right On Replicas I just finished the single drive, it went better than the dual drive but still has some issues with getting the frame perfectly square. I'm sure you'll have better results than I did
Right On Replicas I built this kit this winter. Loved the hinges for the cab tilt,was the best set up I've built so far. The door hinges were ingenious,with the dash panels! Best system I have Ever seen! I've read reviews on this kit,bitching about the chrome,being bumpy etc.Mine was pretty good,my main complaint was the tires! Mine were real thin and the only way to keep them on the rims,looking realistic,I stuffed them with tissue to hold them open,and seated on the bead.Tried to glue one in place ,but it looked ridiculous! Customized mine with a stretch and a flatbed in front of the fifth wheel.Real pleased with it.
Great looking semi.......one question, why haven't these model companies designed any airhose & pigtail connections for semi truck models, i've never been able to find any online.....any suggestions???????
DM, The more detail they add the higher the cost is. I don't think they felt they could compete with a higher price. On the other hand I've seen some nice scratch built detail that fills that gap! PS -if you haven't already, please subscribe so that we can reach more modelers! -Doug
This type of truck is the one that I used for my custom Optimus's truck mode It's only on paper but I will try to buy a Kenworth K100 model kit to paint it to like how I imagine the desing And once maybe I will buy a real Kenworth K100 to complete my dream
AJ, For this model I used Model Master Gunmetal #1795 with 15% flat black and thinned to use in an airbrush. Mostly frames are good with Krylon or Dupli-Color flat back spray. PS, please subscribe if you haven't already to help us reach more modelers. -Doug
Thanks Mitch - I think that the mold design for the Revell kits was pretty good for the big rig kits they released. I just wish they had done more of them! -Doug
To me it looks like Revell got the interior wrong on this kit. With the floor spaces behind the seats and a small bunk, it appears to be the interior of an Aerodyne rather than a flat top. Any of the big cab (110 inch) flat top real K100s that I saw the inside of had a really big mattress with no floor space behind the seats. But I suppose if someone had one of these trucks it would be possible to modify the interior to this configuration.
Rob, This kits is not in production but you can find them online at some retailers and auction sites! Thanks for watching and please subscribe if you haven't already to help us reach more modelers! -Doug
I guess these are nice videos, but although I don't expect show quality, color-sanded airbrushed models with $500 worth of aftermarket resin accessories, doesn't anybody even clean up the mold-parting seams on parts anymore?
JB, great question. Short answer - we're not trying for perfection here. We just want to make sure you know where the issues are. You won't get that from an open box review will you! Doug
@@RightOnReplicas not to be rude sorry. I build models to. They are refreshing and fun. Especially when I drove one for 30 years. Already subscribed. Your channel is awesome
Guess ppl see a cabover ohhhh ehhhhh yea optimus prime dumdum ppl dont realize dodge gmc chevy kw pete international blah blah blah all made cabovers but for rec O.P WAS FREIGHT SHAKER I MEAN FREIGHTLINER CABOVER
It's the 80's Version of OPTIMUS PRIME WHY WHY didn't you Paint him his classic RED & BLUE Colors we TRANSFORMERS Fans would have gone crazy and loved it if you did ahh i'm just messing with ya it looks good as is maybe you should build a other and Paint that up as OPTIMUS PRIME .
COOL Doug why don't you do a other Video on the Kenworth K-100 showing everyone how they can make the K-100 Model look just like OPTIMUS PRIME good idea hm.
Beautiful work Doug! I built the AMT Peterbilt cabover many years ago and the cab mounts were fragile and the cab never set right on them. I am glad to see that the Revell kit did not have that issue. Thanks for sharing this.
Thanks John and thanks for watching! -Doug
I'd love to build this. You are my favorite model show. My step dad was a truck driver in the 70s I've always loved big Rig's 💯💙💙
We love 'em too Mike! - Doug
My favorite build you did
OO, great. Glad you liked it! -Doug
Super job Doug.
Nice truck.
Vaughn
Hey Vaughn - Thanks for checking back with us! -Doug
This kit is on my wishlist.
QM, Sometimes they come up on eBay! --PS, please subscribe if you haven't already to help us reach more modelers. -Doug
Appreciate the build info! A few corrections other than the incorrect engine color and the whole Optimus Prime bit(yep, Freightliner FLT cabover), the turbo......compressor side is correct painting it aluminum; however, the mid-section and exhaust side should be either steel or rust(from heat), aluminum is not used as it won't withstand the heat. The steering box, arm and draglink should be painted chassis color at they were painted as a complete assembly with the frame on the assembly line. The air intake pipe should protrude above the top of the cab around 3-5 scale inches(though it would be obscured some by the ducktail spoiler that was optional) on the flat-top cabs, it puts the inlet into the airstream to draw cool air into the engine through the filter can(which is either painted body color or a simulated polished stainless finish). I base these comments on having been around these trucks for 44 years and 2 million miles driven personally.....keep up the good work!
Bow, That's some awesome detailing information. Thanks! -Doug
Last bit of info....the accesdory drive on the left side of the engine(air compressor, fuel pump) is assembled and painted the same engine tan as the block....
Nice. Really beautiful build. Looks like it is worth the price.
SM These are nice kits at half the price of the imports! -Doug
Just to let you know, at the most, the rear of the truck will only have license plate, not three. I’m a retired trucker and actually had one of these trucks. Multiple plates go on the front, although in modern trucking, there is usually only one license plate. They use IFTA stickers, honored by all states.
Thanks Earl, that great information! -Doug
Doug ,o senhor é muito profissional, adoro seu canal obrigado irmão.
Nice job Doug, I'll have to look for this kw-100 kit. I have the Revell kw-123 kit in my stash and they kind of look the same.I really like watching your vids, Keep up the great work and happy building.
Thanks Scott - I think you'll like the build on this one. -Doug
Love the "RR" front plate
Nikki, Thanks. That's really nice of you! PS, please subscribe if you haven't already to help us reach more modelers. -Doug
Wow! That is nice!😉👍
Thanks Poppy - she is silky smooth! -Doug
Very nice build,now I want one too,but havent seem any around.
MD, I'm afraid it might be a while as Revell is getting reorganized out of bankruptcy. Look for these on eBay for now! -Doug
Have this one in my stash waiting to be built. You're right about the cabover kits being difficult to have line up correctly. The amt white freight liner kit gave me some troubles
MP - Funny you should mention that, we're building one now! -Doug
Right On Replicas I just finished the single drive, it went better than the dual drive but still has some issues with getting the frame perfectly square. I'm sure you'll have better results than I did
MP - It's odd but each run of kits can have different quirks and issues so you never know what you're going to get! -Doug
Nice job,Doug.Like the color scheme.
Charlie, Actually your kinda limited - you only get the blue stripes. Thanks. -Doug
Right On Replicas I built this kit this winter. Loved the hinges for the cab tilt,was the best set up I've built so far. The door hinges were ingenious,with the dash panels! Best system I have Ever seen! I've read reviews on this kit,bitching about the chrome,being bumpy etc.Mine was pretty good,my main complaint was the tires! Mine were real thin and the only way to keep them on the rims,looking realistic,I stuffed them with tissue to hold them open,and seated on the bead.Tried to glue one in place ,but it looked ridiculous! Customized mine with a stretch and a flatbed in front of the fifth wheel.Real pleased with it.
No Prime was a Freightliner or Pete Motormaster was KW. W100
ER, Thanks for the info! -Doug
This is one I love to buy it's hard to find one out in my area I had one before but it fell off my shelf
DW, You may have to go to the online auctions! PS, please subscribe if you haven't already to help us reach more modelers. -Doug
Ok great thank you very much for the information and I subscribe about 5 months ago like your builds you do great work
DW, That's awesome, thanks! -Doug
Great looking semi.......one question, why haven't these model companies designed any airhose & pigtail connections for semi truck models, i've never been able to find any online.....any suggestions???????
DM, The more detail they add the higher the cost is. I don't think they felt they could compete with a higher price. On the other hand I've seen some nice scratch built detail that fills that gap! PS -if you haven't already, please subscribe so that we can reach more modelers! -Doug
No Optimus was a freightliner FLB cabover
Thanks MR -Doug
The original in the 1980s was as mentioned a Freightliner.
Freightliner flb was a Optimus
great build box stock , on a great , impressive kit from Revell....on my want list...superkool
RJ, so many kits - so little time! - Doug
This type of truck is the one that I used for my custom Optimus's truck mode
It's only on paper but I will try to buy a Kenworth K100 model kit to paint it to like how I imagine the desing
And once maybe I will buy a real Kenworth K100 to complete my dream
PtD, Those are big plans and great ideas, carry on! -Doug
Wrong engine colour - it's not a Caterpillar, it's a Cummins 475hp twin turbo, so it should be the Cummins tan
f01, thanks for the info! -Doug
Would that be the 400 big cam
I drove one just like it! 4 & 1/4 Cat!
JM, that's cool! Got any road stories to tell us? -Doug
I have this kit stashed away along with 25 other one I'll probably tackle after I retire
WF, Why wait. If you spend a few minutes each you'll bulid one each month! - Doug
What paint company and color do you use for the frame and suspension rigging?
AJ, For this model I used Model Master Gunmetal #1795 with 15% flat black and thinned to use in an airbrush. Mostly frames are good with Krylon or Dupli-Color flat back spray. PS, please subscribe if you haven't already to help us reach more modelers. -Doug
Right On Replicas I’ve subscribed because this channel will really come in handy. Thanks for the feedback
AJ, Thanks man! -Doug
I love it.😀
Thanks SB, You da man! -Doug
love the build
Thanks Mitch - I think that the mold design for the Revell kits was pretty good for the big rig kits they released. I just wish they had done more of them! -Doug
yeah i built the peterbuilt 359 and it was pretty fun
Mitch - Was that one of the AMT offerings? -Doug
Right On Replicas revell
Thanks and that one built up well? - Doug
To me it looks like Revell got the interior wrong on this kit. With the floor spaces behind the seats and a small bunk, it appears to be the interior of an Aerodyne rather than a flat top. Any of the big cab (110 inch) flat top real K100s that I saw the inside of had a really big mattress with no floor space behind the seats. But I suppose if someone had one of these trucks it would be possible to modify the interior to this configuration.
James, Thanks for the lowdown! PS, please subscribe if you haven't already to help us reach more modelers. -Doug
This isn’t the truck used as a model for optimus. Optimus was a freight liner.
Willie, Thanks for sharing! Thanks for watching and please subscribe if you haven't already to help us reach more modelers! -Doug
That's not a cat motor it's a 465 Cummins it's supposed to be white,I had this kit years ago in a airodyne.
DM, Thanks the info and for watching and please subscribe if you haven't already to help us reach more modelers! -Doug
Is this model still in production?
Rob, This kits is not in production but you can find them online at some retailers and auction sites! Thanks for watching and please subscribe if you haven't already to help us reach more modelers! -Doug
@Right On Replicas awesome! Will do! Thanks!
I noticed that the drivers door dosen't fit well at the top
RW, Yes it is warped outward at the top and I should have spent some more time trying to shape it to fit. -Doug
why do you have to cut the air cleaner stack
RW, It won't fit properly if you don't. -Doug
I guess these are nice videos, but although I don't expect show quality, color-sanded airbrushed models with $500 worth of aftermarket resin accessories, doesn't anybody even clean up the mold-parting seams on parts anymore?
JB, great question. Short answer - we're not trying for perfection here. We just want to make sure you know where the issues are. You won't get that from an open box review will you! Doug
OK, works for me. 😎
Sir Optimus Prime was a Freightliner.
Clint, Thanks for the info and please subscribe if you haven't already to help us reach more modelers!
@@RightOnReplicas not to be rude sorry. I build models to. They are refreshing and fun. Especially when I drove one for 30 years. Already subscribed. Your channel is awesome
Guess ppl see a cabover ohhhh ehhhhh yea optimus prime dumdum ppl dont realize dodge gmc chevy kw pete international blah blah blah all made cabovers but for rec O.P WAS FREIGHT SHAKER I MEAN FREIGHTLINER CABOVER
TC, Yep! -Doug
It's the 80's Version of OPTIMUS PRIME WHY WHY didn't you Paint him his classic RED & BLUE Colors we TRANSFORMERS Fans would have gone crazy and loved it if you did ahh i'm just messing with ya it looks good as is maybe you should build a other and Paint that up as OPTIMUS PRIME .
PJC that's easy, so we would have a reason to buy another kit! -Doug
COOL Doug why don't you do a other Video on the Kenworth K-100 showing everyone how they can make the K-100 Model look just like OPTIMUS PRIME good idea hm.
PJC, Good suggestion, I'll keep that in mind! -Doug