INSTALLING THE TURBO INTO MY COROLLA

Поділитися
Вставка
  • Опубліковано 1 січ 2023
  • **Some links are affiliate links that I earn a small commission on**
    - www.turbokits.com/tk-corolla-...
    ALL MODS ON THE COROLLA:
    Wheels: amzn.to/3WKgcGd
    Tires: amzn.to/3H1eaLH
    Borla exhaust: amzn.to/3OJDeg2
    Brakes: amzn.to/3kC07VC
    Coilovers: amzn.to/3iX91wl
    Rain visors: amzn.to/3wmMJak
    Hyper dip: amzn.to/3D66kzk
    Rear spoiler: amzn.to/3HolsdV
    Brake light vinyl: ebay.us/sbgRrd
    Headlights: amzn.to/3GSDUd6
    Fog lights: ebay.us/Bl2gms
    Tail lights: ebay.us/f2O3rD
    Bumper lights: amzn.to/3XNuLcL
    Body kit: ebay.us/Qh9cbV
    Tow strap: amzn.to/3WoJidW
    Hella horns: amzn.to/3GSEEyU
    Hella horn harness: amzn.to/3D6wBgO
    Hood struts: amzn.to/3iUI38F
    Cheap radio: amzn.to/3wmoE3r
    Idoing radio: ebay.us/FTFI02
    Flasher relay: amzn.to/3XQwCxo
    Backup camera: amzn.to/3XQ1nCJ
    Front camera: ebay.us/nqQnNu
    Keyless entry: amzn.to/3H0DRMx
    Dash cam: amzn.to/3wnRUXK
    Sub/ amp: amzn.to/3J5Tjtq
    Vinyl floor: amzn.to/3J4bxLZ
    Pedals: amzn.to/3QVGFz7
    Carbon fiber vinyl: ebay.us/LQ8WxN
    Dual USB: amzn.to/3D5LPmt
    Steering wheel cover: www.eastdetailing.com
    Arm rest: ebay.us/FX6hUE
    Short shifter/ bushings: www.monkeywrenchracing.com
    Cold air intake: ebay.us/9ZKDiz
    Tune: amttuning.com
    Catch can: amzn.to/3XvMHci
    Catch can hoses: amzn.to/3XtegCN
    Turbo kit: www.turbokits.com/tk-corolla-...
    ------------------
    DISCOUNT CODE: BRANDON75
    Seat covers: www.clazzio.com
    DISCOUNT CODE: COROLLA5
    Performance solenoids: www.redbullet.net
    DEALERSHIP LEVEL MANUALS WITH eMANUAL:
    shrsl.com/3zta2
    STAY HYDRATED WITH LIQUID IV: glnk.io/8ln02/brandon-stellmach
    20% DISCOUNT CODE “BRANDON_STELLMACH”
    BEST FLOOR MATS 3DMATS: bit.ly/3yWWQVs
    10$ DISCOUNT CODE: BRANDON3D10
    LED LIGHTING LASFIT: lddy.no/1fplh
    15% DISCOUNT CODE: BRANDON15
    ------------------
    *Some of the links are affiliate links that I make a small commission off of.
    » » » » » » » » » » » » » » » » » » » » » » » »
    Business Inquiries, contact:
    brandonstellmachbusiness@gmail.com
    » » » » » » » » » » » » » » » » » » » » » » » »
    *UPDATED LINKS*
    Camera Gear I use:
    DJI ACTION 4K: amzn.to/45BVu0M
    TRI-POD: amzn.to/3MZASYP
    SUCTION MOUNT: amzn.to/3OJkD3C
    INSTAGRAM: / justa_yota
  • Авто та транспорт

КОМЕНТАРІ • 186

  • @user-eh7sf6cd7u
    @user-eh7sf6cd7u 8 місяців тому +13

    Just catching up on some of these earlier videos. I think someone already mentioned this, but man, this seems like a seriously colossal mod. I mentioned earlier somewhere about getting to a comfort level with mods so that it is easier to do. I'm not sure though that I would have the guts to jump into this one. Seeing the types of mods you have done, and then seeing you jump into this one fearlessly is inspiring - serious respect for you...some very funny dry wit to go along with it. Keep the vids coming...

    • @BrandonStellmach
      @BrandonStellmach  8 місяців тому +2

      Adding a turbo was quite the hefty project. But I would say 80 percent of it, is just unbolting the old stuff and installing the new stuff. And the other 20 percent is doing things that require a little more knowledge than a simple bolt on.
      But installing it definitely taught me many more things that I have never done before.

  • @joseladino2772
    @joseladino2772 Рік тому +44

    I WANNA HEAR IT ON THE ROAD

  • @FlyBoyZJ1
    @FlyBoyZJ1 Рік тому +18

    I've had my eye on that kit for a while now! Really exciting for that initial start up! Can't wait to hear how things are going :))

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +3

      This was definitely worth all the effort! But was a little pricey!

    • @henrytzul-lacan1627
      @henrytzul-lacan1627 Рік тому

      @@BrandonStellmach what did u choose for the dropdown menus?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      @@henrytzul-lacan1627 I talk about all that in my unboxing video.
      ua-cam.com/video/2ONBRpzdtaA/v-deo.html

  • @captainjosue
    @captainjosue 5 місяців тому +1

    I want to congratulate you on your turbo install. I ordered the same turbo kit from Monkey Wrench Racing for my 2001 Celica GT. I'm on the second day. Your video is really helping me because this has been a tough but doable process and you have done it. Absolutely great job. You should be very proud. Very few can do this.

  • @zombiekilldood
    @zombiekilldood Рік тому +12

    honestly i wish i could turbo my corolla, it's a 2010 corolla but it's with an automatic, it used to be my mom's car and now she handed it over to me but i love watching your videos! i had gotten an intake on it, the borla s-type muffler and i did some other things as well. it's got around 156,000 miles on it and i don't have much money to work with since im still young but it's the most reliable car i've driven!

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +4

      They say this will work with the automatic, I just might not last as long as the manual!
      But hey we all got to start somewhere. And I did the same things started with all the small mods and saved up to get some nicer and bigger mods!

    • @ZayxYT
      @ZayxYT Рік тому +1

      this is hilarious because me and you are in the exact same position. im getting my moms automatic 2010 corolla ce with 250km on it which is approx 150k miles lol

  • @oreally8605
    @oreally8605 3 місяці тому +1

    I have a 2012 9.0 RS Scion xB with the 2AZFE 2.4. Been imagining this.

  • @ufosingh7077
    @ufosingh7077 Рік тому +1

    You deserve 100k views already. Great content

  • @crazzzyork8359
    @crazzzyork8359 5 місяців тому +1

    i just found your video and i have to say your corolla looks sick man. Much love💌

  • @Pallidus_Rider
    @Pallidus_Rider Рік тому +3

    Very cool 👍😎👍
    Looking forward to next video ❗

  • @helenlss9395
    @helenlss9395 Рік тому +2

    Thank you for your sharing!🍻

  • @tarkhanmammadli2038
    @tarkhanmammadli2038 Рік тому +1

    Well done bro👏

  • @kidlo2050
    @kidlo2050 Рік тому +7

    I see I have some videos to binge. I haven't been modding my corolla because I got laid off a month ago. But first, congrats on the Tacoma. Its looks nice. Second congrats on the turbo. Your channel for sure have to grow a lot from this.

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +2

      Damn that sucks! Hopefully everything goes good with the job search!
      But thanks I really appreciate it! 🙏

    • @Dissonance757
      @Dissonance757 Рік тому

      You doing alright?

    • @kidlo2050
      @kidlo2050 Рік тому

      @@Dissonance757 yea I got another job. Paying me decently good and I'm just saving the money for now.

    • @Dissonance757
      @Dissonance757 Рік тому +1

      @@kidlo2050 Glad to hear, God bless!

  • @delcogoblin
    @delcogoblin 7 місяців тому +3

    Thank you for uploading this. I'm also fairly green with modding and I wanted to know all the little things about turboing a corolla. We aren't trying to race ours, my mom is just fed up with how slow it is when accelerating and doesn't want to buy a new car. :)

    • @BrandonStellmach
      @BrandonStellmach  7 місяців тому +1

      I hope the video gave you some good information!
      But this would definitely give the corolla some more power!

    • @Illegal_Andres
      @Illegal_Andres 5 місяців тому

      have you cleaned our the throttle body

    • @crazyfireboy123
      @crazyfireboy123 4 місяці тому

      You also need to tune it and push maybe at most 8psi. The compression ratio is totally diff from an actual turbod car

  • @LujinCustom
    @LujinCustom Рік тому +1

    Congrats on a successful installation. Now to do cams.
    Or better yet, swap in a 3ZRFE 🤤

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      Thank you! And probably will run this engine until it blows up. And either do another 2ZR and have built internals. And I haven’t really heard much about the 3ZR. We’re they ever in America?

  • @TheCrooksandCastle
    @TheCrooksandCastle Рік тому +1

    sounds amazing

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      Thank you! I agree, the turbo makes it sound much better!

  • @sarfaraznazeerally1413
    @sarfaraznazeerally1413 Рік тому

    Can’t wait for the next video

  • @wesleybarton6443
    @wesleybarton6443 Рік тому +8

    Hey! Love watch you done to the Corolla! I have a 2015 Toyota Corolla model S I believe it’s a automatic, I’ve done loads of stuff to the interior but after seeing your channel I have so many questions! I’m going to be getting the same Turbo kit you did but I’m curious what exactly did you use for fuel and engine management, as well as what your sensors and stuff look like! I would love to see a video detailing those steps and how it works if not some insight would be amazing! ❤

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +2

      That’s awesome! Love seeing others modifying their corollas!
      But as for engine management, I went with what turbokits offered, with the AEM FIC. Which is a piggy back harness that plugs into the stock ECU, and then from there i you can tune your fuel and ignition with that.
      And sensors, I honestly only ran a boost gauge, but do plan to run others as well. And will post a video about that!
      If you have other questions just reach out to me on Instagram, @justa_yota

    • @The_real_papadon
      @The_real_papadon 11 місяців тому +1

      Bro? Just one question how do you not know what kind of transmission you have? I don’t think you should be driving if you don’t that lol. Do you have two other pedal to the left of your gas pedal? Or just two (gas $ brake) do you have to manually shift gears or do you put it in drive and leave it? Automatic or Manual man.

    • @wesleybarton6443
      @wesleybarton6443 11 місяців тому +1

      @@The_real_papadon I have a CVT automatic transmission I know this now, just wasn’t sure if mine was a CVT just getting into all the car stuff if u wanted to be a dick don’t reply dude lol

  • @jamez3875
    @jamez3875 Рік тому

    I dont know whtats going on but I like it nice work!

  • @mattjanachek
    @mattjanachek Рік тому +2

    I can see right now I'd need to do this myself as well, cause no technician would do all that for cheap!

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +3

      Yeah it’s a lot of work to install the turbo. And I doubt any technician is going to want to drill a hole in your engine. Lol

  • @friks409
    @friks409 Рік тому +1

    It's just a pleasure to watch you work. Handsome continue.

  • @lolwhodis7817
    @lolwhodis7817 Рік тому

    Letss gooo, might do the payment plan option for the turbo

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      It’s an awesome upgrade! But I do wish it was a little bit cheaper!

  • @Yakanhikoerotikkushiti
    @Yakanhikoerotikkushiti Рік тому

    Will definitely turbocharge my 2003 Corolla S once I get the crower stage 2 forced induction camshaft for it. Hopefully this year.

  • @salamongxiong9441
    @salamongxiong9441 Рік тому

    are you parting out the other parts -- like the borla exhaust? I've been looking to get one for my Corolla

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      I will probably in a few weeks. Just want to make sure everything goes as planned with this!

  • @andrewwargo2151
    @andrewwargo2151 Рік тому +1

    REMARK quad cat back exhaust sounds 100x better, but you need to install the TOMS racing rear diffuser to accommodate the dual exhaust. I bought the one with the blued titanium tips, and the K&N short ram air cold air intake with heat shield is way better and has out of the box dyno sheet proving HP gains. Granted your video is about the 1.8L, and I have a 2022 Nightshade hatchback with the 2.0L.l for my every day driver. My garage kept weekend car is a 2022 GR Supra. I have two kids so it’s not practical for an every day driver as it’s a two seater. You forgot the potential suspension upgrades that are cheap and literally bolt on accessories that help handling performance. Prior to this car I had a 2010 XRS 2.4L that was a lot a fun. Either way, solid build but just offering up some other potential suggestions. The only downside is my car has a CVT transmission so if you pump too much HP into it with adding a turbo you will rip the tranny apart. Long story short, add the suspension upgrades for better handling. The Supra is staying stock… it’s badass as is.

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I will have to take a look into that exhaust and see if they make something for my car.
      But the 2022 hatchbacks look really nice!
      I would love to get a GR corolla! They got the power and practicality of a seden!

  • @hellofisher3437
    @hellofisher3437 10 місяців тому

    cool man. Quick question. Did you select the thermal coating on the turbo, exhaust manifold, etc?

    • @BrandonStellmach
      @BrandonStellmach  10 місяців тому

      I did not, I was planning on getting a turbo blanket for much cheaper.

    • @hellofisher3437
      @hellofisher3437 10 місяців тому

      @@BrandonStellmach thanks man

  • @melvinbrumski1446
    @melvinbrumski1446 Рік тому +1

    Pretty nice kit to go on so smoothly, money well spent! What are your plans for that heat wrapped header you took off?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      It was a pretty good kit!
      And I probably will sell them later on.

    • @melvinbrumski1446
      @melvinbrumski1446 Рік тому

      I’ll hit you up on Instagram so you can let me know if/when you decide to. I’m assuming it’ll fit an 08?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      @@melvinbrumski1446 I don’t think they will fit a 2008. This is for a 2009-2018 corolla.
      With the 2ZR motor.

    • @melvinbrumski1446
      @melvinbrumski1446 Рік тому

      I forgot they switched engines at that point :/ I know where one is available but at $900+ I might just get creative/make compromises

  • @stevengonzalez4512
    @stevengonzalez4512 Рік тому

    Bro that's awesome congratulations on the turbo , I don't even think they make it for my 15 Camry SE. Do they?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      Thank you! 🙏
      And I know there is a kit for the Scion TC. Which has the same engine. Not sure if anyone has tried to put it on a Camry yet.

    • @stevengonzalez4512
      @stevengonzalez4512 Рік тому

      @@BrandonStellmach maybe I will

  • @hal479
    @hal479 Рік тому

    if you got a longer pipe, do you think you’d be able to tap the oil return into the drain plug hole?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      The reason why I put the drain for the turbo on the block and not the oil pan, is because the turbo relies on gravity to drain the turbo, and if the drain line has any up movement in the line it will not drain good, and could possibly destroy the turbo.
      For most other cars the actually have a large drain pan, while this gen corolla has a very slim drain tray.

  • @shahfaisal8771
    @shahfaisal8771 5 місяців тому

    U earn a sub boy

  • @neonnnja8998
    @neonnnja8998 7 місяців тому

    What did you have to do motor wise in order for it to handle a turbo I want to install one on mine but have no clue what I'm doing to be honest

    • @BrandonStellmach
      @BrandonStellmach  7 місяців тому

      The motor has everything stock. These motors in this generation corolla can easily handle low boost of around 7-10 PSI.

  • @Foefoefoe444
    @Foefoefoe444 Рік тому +4

    i have a couple of questions .how much did you initially pay for the whole entire kit, did you opt in for the injectors, how much boost do you normally have, and ive been following this project for a while so im wondering how much you dumped into this car

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I talk about more of this stuff in my unboxing video, which I will link as well.
      But I paid about $4200 for everything, I upgraded to 550cc injectors.
      And right now I’m running the base tune, which should be around 8 PSI. But will be getting a dyno tune soon for a better tune and see how much power I will be making.
      But if your wondering the total amount I have spent in this car, I would say around 10K.
      ua-cam.com/video/2ONBRpzdtaA/v-deo.html

  • @kennethricher45
    @kennethricher45 5 місяців тому

    Where you drilled the hole and tapped it seemed pretty thin. How’s that holding up?

    • @BrandonStellmach
      @BrandonStellmach  5 місяців тому

      It was about a 1/4” thick. But has been holding up good. No leaks or cracks.

  • @user-mn7mj7zk9x
    @user-mn7mj7zk9x 6 місяців тому

    What year is the car? can see that you have a newer intakemanifold. I got a TS with 192 hp from 2002, bujt didn´t find any turbokit. Nice video !!!!
    Regards from Sweden !!!

  • @adamhonda98
    @adamhonda98 Рік тому

    At Toyota I used to use Vaseline for the o rings on the injectors before I pu them in

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      That’s a good idea. Wish I would of known that when I was doing my injectors.

    • @elvism684
      @elvism684 Рік тому

      As long as they are made from synthetic and not real rubber. Petroleum/Mineral based degrades real rubber.

  • @frankelysespinal7821
    @frankelysespinal7821 Рік тому

    What did you do with the pieces you removed? example header, and the injen intake?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I still have them, will most likely be selling them in the future!

    • @frankelysespinal7821
      @frankelysespinal7821 Рік тому

      @@BrandonStellmach I need those parts, how can we get in touch?

  • @CL-yp1bs
    @CL-yp1bs Рік тому +1

    Bro its a return line you could have welded a fitting onto the black steel lower oil pan... its not a supply line.. its a return line.. for supply use sandwich plate (you have to buy adapter to switch from cartridge filter to canister oil filter) or T fitting at stock oil pressure sensor/switch like you did. Just a tip for you, do not run 0w-20 with a turbo setup... you need more protection, you should be running 5w-30 (or 0w-30 if you live in extremely cold environment)

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      Well let’s just say threading a hole is much easier for me then welding the fitting into the pan. Because this was more of showing people they can do this in their own garage without any major tools! As well I was told from turbokits that’s the return line shouldn’t have any upwards movement because it relies on gravity to return.
      But trust me I would have much rather drilled into the oil pan, because I can replace it easier then the lower block, lol.
      But i will look into running a higher weight oil, because I have heard it is better for the turbo. But I live in Florida so it never gets cold.

  • @jaredhernandez2313
    @jaredhernandez2313 Рік тому

    My dad sold his 2013 m/t Corolla for a 2023 awd Camry, I’m still gonna be watching your videos of course but I wish I could’ve turbocharged the car

    • @a9five
      @a9five Рік тому +1

      Dang bro that's what I'm saving for 2011-2013 corolla 👌🏼

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      Hate to see him get rid of the corolla! But those new Camrys are really nice!

    • @jaredhernandez2313
      @jaredhernandez2313 Рік тому +1

      @@a9five I’m trying to find a 9th gen xrs for the extra horse power

  • @dawoody
    @dawoody Рік тому

    awesome vid man! will this same kit work on a 2014 corolla S? Thx

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      From what I have heard this will work for 2014 corolla. But I believe there is some modification you may need to do. But this has the same motor my car does!

  • @pancake_5703
    @pancake_5703 Рік тому +2

    I want to do this so bad to one of these cars and make it a sleeper, feel like this platform has so much potential but no one does anything with them

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      Yeah this platform has a bunch of potential. Just not many people realize it!
      But making this a sleeper would be awesome!

  • @themotaalugang
    @themotaalugang Рік тому

    Can you teach us how to clean engine bay? i have an 2007 corolla axio.

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      I have actually made a video detailing my engine bay. Here is the link.
      ua-cam.com/video/1YEV6tTmzmE/v-deo.html

    • @themotaalugang
      @themotaalugang Рік тому

      @@BrandonStellmach Thank you so much dude

  • @demetrioschristostatakis9338
    @demetrioschristostatakis9338 3 місяці тому

    I think it would make more sense finding a more quality oil return fitting for the block to maintain structure and reliability

  • @anthonynieves6614
    @anthonynieves6614 11 місяців тому +1

    Remember the turbo needs oil for lubrication on that spot there high u dont get the pressure and amount needed like the botton where all the oil is matter of speaking

    • @BrandonStellmach
      @BrandonStellmach  11 місяців тому +1

      The turbo is getting oil supplied from the oil pressure sensor. It’s it should be getting good lubrication.
      The bottom line is just a drain line for the oil that goes through the turbo.

  • @dylahaw
    @dylahaw Рік тому

    i know u sold the camry, but man don’t you wish they sold kits for the 2.5 cam, i know they do for the scion tc 2ar-fe same engine as the cam but glad to see the corolla get a turbo 😮

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I did want to turbo the Camry, and I have heard people modifying the TC turbo kits for the Camry. But seemed like a lot of work.
      Also the Camry was an Automatic, and would really loved to have it a manual.

  • @OGBarry16
    @OGBarry16 3 місяці тому

    Holy shit😂this is awesome…

  • @JonathanCruz-ik1dx
    @JonathanCruz-ik1dx 8 місяців тому

    How much would you charge me to install the same kit in my 2011 S?

    • @BrandonStellmach
      @BrandonStellmach  8 місяців тому

      I am sorry, I don’t work on other peoples cars.
      But it’s a lot of work. But if you could find a shop to install it, it would probably cost about as much as the setup to install.

  • @freddiefabionar1576
    @freddiefabionar1576 5 місяців тому

    Can you tell me what kit it is and where to order pls ty

    • @BrandonStellmach
      @BrandonStellmach  5 місяців тому

      This kit is from turbokits.com. I have put the link to the kit I ordered in the description.

  • @CombatePractico
    @CombatePractico 4 місяці тому

    Mine smokes bro. And I did mine a little bit higher than yours l. But smokes if I push the accelerator hard

  • @KhalilAhmad-zr2bv
    @KhalilAhmad-zr2bv Рік тому

    Any effect on fuel consumption / average?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      So in the gauge cluster. It actually shows me getting around 35 MPG. While before I think it was around 26-28. But having the base tune with my turbo. I don’t think I can trust it.
      But I honestly think it has gotten better because a tank of gas last me longer then it used to without the turbo!

  • @user-gp8ec6rr2p
    @user-gp8ec6rr2p Рік тому

    Hey Brandon
    Do you have the Header that you removed from your Corolla? Will you sell it to me?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I have already sold them!

    • @user-gp8ec6rr2p
      @user-gp8ec6rr2p Рік тому

      ​@@BrandonStellmach
      Do you have the regular air intake for sale or you sell it/

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      @@user-gp8ec6rr2p sorry, I do not. I have already sold everything that I have taken off.

  • @PrjWide4sf
    @PrjWide4sf Рік тому

    plz post more!

  • @chickenwingsLMAO
    @chickenwingsLMAO Рік тому +1

    I want to modify my family's minivan, a Toyota. Can I get some advice

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      The best advice is to do as much research on whatever you are trying to modify, so you are familiar with what you are doing.

    • @chickenwingsLMAO
      @chickenwingsLMAO Рік тому

      @@BrandonStellmach it's a 2007 facelifted Toyota Noah

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      @@chickenwingsLMAO just doing a quick search on that car, it looks like you have a 3ZR engine. And if you plan on modifying if, I would look up any Toyotas that have the same engine.
      My corolla has the 2ZR, so it will be similar, but not that exact same!

  • @ell474
    @ell474 Рік тому

    Part 2 please

  • @LexisTheHighTone
    @LexisTheHighTone 7 місяців тому

    What ECU did you get for tuning bro.

    • @BrandonStellmach
      @BrandonStellmach  7 місяців тому +1

      I was using a piggy back harness with an AEM FIC with a base tune on it.

    • @LexisTheHighTone
      @LexisTheHighTone 7 місяців тому

      @@BrandonStellmach I only have my ECU reflashed but some people are telling me to stay with it because theres not gonna be a lot of difference if i get a different ECU and take the car for tunning since all i have is few parts only.Im not sure about what can i do in order to get the hp of the parts i got

    • @BrandonStellmach
      @BrandonStellmach  7 місяців тому +1

      @@LexisTheHighTone​​⁠taking it to a dyno, they will most likely be able to get more HP out of the mods you have, but probably not much more and not many people tune Toyotas.

  • @Caned5
    @Caned5 Рік тому

    This on the stock axles?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      Yes! Right now everything is stock including the clutch. But the clutch is slipping with a full throttle pull. So I plan to upgrade the clutch. And when I do that will look to see if they have any upgrades axles!

  • @chxpo8776
    @chxpo8776 Рік тому

    Does that turbo kit fit for 2011 corollas?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      Yes this kit will work from 2009-2018 corollas with the 1.8L.

    • @chxpo8776
      @chxpo8776 Рік тому

      @@BrandonStellmach what upgrades did you do?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      @@chxpo8776 if your talking about internal upgrades. I haven’t done anything. This is a stock motor.

  • @darkwarrior1744
    @darkwarrior1744 Рік тому

    Do I have to remove the catalic converter?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I’m order to put the turbo and down pipe on the car. You will need to take off the old exhaust.
      But weather or not you want to weld on the stock catalytic converter, you can do that afterwards.
      Almost 100% of the time, when you are putting a turbo on the car, people usually don’t put it back on!

  • @kevinquintanilla1590
    @kevinquintanilla1590 Рік тому

    what year is the corolla?

  • @marzent1994
    @marzent1994 Рік тому

    What engine is that 1zz?

  • @elmasfrio7851
    @elmasfrio7851 Рік тому

    Not to have ocd but did you even torque the bolts😂 did you hand tighten it?😂

  • @migueltayag9445
    @migueltayag9445 Рік тому

    Do you know if this is CARB legal?

    • @BrandonStellmach
      @BrandonStellmach  11 місяців тому

      I do not think so, because you have to replace your entire exhaust. Unless you can get cats installed.

  • @gary1134
    @gary1134 Рік тому

    Is the turbo smog legal?

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I don’t think so, I would contact them and ask them for your specific vehicle.

  • @louisbabycos106
    @louisbabycos106 8 місяців тому

    I wish they had a turbo kit for the TOYOTA CHR. A good looking vehicle hampered by it's power train. .

    • @BrandonStellmach
      @BrandonStellmach  8 місяців тому

      That would be an interesting car to out a turbo on. I have seen some really nice CHR’s.
      I wonder if some of the first ones had the same 1.8L as the corollas. If so this could would mostly work!

  • @RecklessRedz
    @RecklessRedz Рік тому

    What motor is this?

  • @wastedoutcast4432
    @wastedoutcast4432 Рік тому

    are you getting it retuned?

  • @saminjahan4037
    @saminjahan4037 Рік тому

    Why didn't you go with the bigger turbo? You get more HP.

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      Gotta start somewhere! And the internals of the engine can’t handle much more power then what this turbo can put out!

  • @alexmarshall9887
    @alexmarshall9887 Рік тому

  • @Jason-nt3gn
    @Jason-nt3gn Рік тому

    how much hp are you at now

  • @petermuniz9296
    @petermuniz9296 Рік тому +1

    Dose your Corolla have the cvt tranny

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      No, it has the 5 speed manual

    • @petermuniz9296
      @petermuniz9296 Рік тому +1

      @@BrandonStellmach dam I got the cvt crap I hope it last longer then manual

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      @@petermuniz9296 I have heard good and bad things about the CVT transmissions. But hopefully yours will last a long time!

    • @theoneandonlynophoney1864
      @theoneandonlynophoney1864 Рік тому

      Lol I have a 2010 , 1.8,it’s at 125000 miles ,I’ve had it 3 years and I bought it at 69000 miles ,ik I still have a long way to go

  • @melvinbrumski1446
    @melvinbrumski1446 Рік тому

    Oh also before I forget again, any plans for an LSD? You’re definitely going to have traction issues now.

    • @BrandonStellmach
      @BrandonStellmach  Рік тому +1

      Yeah plan to do one in the future. But most likely will wait for this transmission to start having problems first!

    • @melvinbrumski1446
      @melvinbrumski1446 Рік тому

      Just be careful with the torque steer man boost is addictive

  • @silentgaming1197
    @silentgaming1197 Рік тому

    😱👍

  • @LekimaKaloutani-mv3sb
    @LekimaKaloutani-mv3sb Рік тому

    Bro is this a 2az!?

  • @moneebt420
    @moneebt420 11 місяців тому

    its called a Cowell not window shroud.

  • @markgoodrich4666
    @markgoodrich4666 Рік тому

    What a nightmare !

  • @anthonynieves6614
    @anthonynieves6614 11 місяців тому

    Bro u dont drill on the block you drill on the oil pan jesus lord what the heck 😢😢😢😢

    • @BrandonStellmach
      @BrandonStellmach  11 місяців тому

      The reason you drill into the block on this engine is because the “oil pan” is more of a oil tray. And doesn’t have room to put a drain for the turbo. And this turbo drain line uses gravity, and if there is any upward travel, the oil would not drain probably and backup into the turbo.
      Many other cars actually have a large enough oil pan that is about 6 inches deep, so there is plenty of trim for the drain plug.

  • @a9five
    @a9five Рік тому

    First 👍🏼

  • @NOT_AZAAB
    @NOT_AZAAB 11 місяців тому

    A

  • @Mavisluty
    @Mavisluty 8 місяців тому

    You are just talking and talking

  • @stevengonzalez4512
    @stevengonzalez4512 Рік тому

    Hey bro what your email I want to send you some pictures of my Camry the front is almost done I want you to see what you inspired me to do

    • @BrandonStellmach
      @BrandonStellmach  Рік тому

      I would love to see your Camry, if you have Instagram, send me a DM @justa_yota
      If not here is an email you can send me pictures.
      brandonstellmachbusiness@gmail.com