I'm working on showing dart what they should have made with the dart. You don't take a track car like a guilietta or a rally car like an Abarth, tune it for economy, and sell it with a muscle name. No, my aero is dropping the Dart badge being renamed aerow, and being built right. All I got left to do is wheels, exhaust, and a tune.
@@user-dj1hy6zc6q Top notch sound editing if it was a joke. I know they're both audio professionals but that was some extremely convincing editing if that's what it was.
@@alexanryset1404 did too lol they shoulda not put that one more degree of timing or added the fuel. more fuel yes more cool, but more fuel also means more cylinder pressure. the extra fuel more than timing is more than likely what rod knocked that 1.8. lessons learned, if i ever do this i'll add clearence to bottom end bearings and add .002 to the ring gaps. i read an article that said a 2 ZR would handle 200ish wheel horsepower easily with these additions, and additional oil flow.
Hmmmm, Yaris was 3000AUD, and a 750 goes for 1500-2000AUD on the haltech website (probably even less at a reseller) but i get what you mean, ECU is a big obstacle on the way for me too :/
You probably didn't watch the previous episodes where they listed the cost of the build. It's way over nin...three thousand already. The $169 is a recurring joke.
Into a custom harness.. in an imported swapper engine... with various parts-machining to fit things.. and a new imported engine mount with a JDM tax.... and a new fuel pump... and a professional dyno day.. not including labor from all the mechanics' work for several days XD
to be fair they do that to save time and money (haltech supplies MCM parts for cheap/free i think), could be done differently if it was your personal project car and you were modifying it over the winter not over a couple of weels like marty and moog do...
@@jstein77 Nah man, that was too loud, not even a 2,5 4cyl sounds that bad with just a spun bearing. Pretty sure that was the lovely sound of a broken conrod hammering at the the block #YarisHiltonKO
@@jstein77 true, that's a likely case and yes, it can run, the power for the last 3 cycles will overpower the resistance from the broken. I mean I could be wrong, it could just be a broken driveshaft or a destroyed gearbox. But I'm still fairly certain that the sound was being too loud to just be a spun bearing
I'm glad you did this video. It goes to show that a good engine with a properly installed EBAY turbo can be fun and worth every penny. Not saying name brand turbo's are not better , of course they are. But everyone can't afford them.
Think you should watch till after the credits mate Edit: Didnt realise it was marty who'd said this as was distracted getting ready for work when I watched the episode.
@@megunded Thank you kindly for pointing that out. I was only half paying attention this morning as was watching while getting ready for work and missed marty say this.
@@FriedEggsandJellyfish Err no, he means big end bearing. A connecting rod can have two bearing surfaces so calling it the connecting rod bearing is ambiguous. It's big end or little end.
@@ferrumignis err no. If you're uneducated in the matter and get your information from reading motor trend magazines than sure. In the industry, you'd get laugh at for pronouncing it that way. the "big end" is attached to the offset journals of the crankshaft. There are only two bearings used on con rods. Not sure why you'd need to specify "big end" for bearings. Unless you can magically use bearings on the "small end", which errrr no you can't.
@@ferrumignis it's big end or little end. If you never touch the inside of an engine. Otherwise, it's a rod cap bearing typically with a notch and hole for oil squirter.
I love that the first dyno run, due to the limitations of the Yaris fuel system, they made less power than the 2ZR-FE did in stock form. lmao That end knock tho...
It sounded weird to us too as the term "big block" is an American term which is not used in Europe or anywhere else that I'm aware of!! I think he made it up to try to sound american but has used it totally out of context lol!!
@@Lahautz Erhm they really did make a Yaris version with that engine too, why do you think MCM and everyone els knows a corolla 1,8 vvt fit in the car? Toyota Yaris GRMN 1,8 vvt with supercharger (205 hp (153 kW))
@@VikingRul3s That's a different gen Yaris, tohis gen only had an NA 1.8. The Corolla T Sport came with the same NA 1.8 or could have a supercharger. It wasn't very fast though.
The 2ZR-FE is capable of much more than 100 Kw at the wheels, providing a good tune (good fuel, good fueling, good intake temps and not too much timing advance etc). There are tons of them running around with forced induction and 135+ Kw wheel. There must have been something wrong with the engine from the start or it went lean and detonated, though I'd be surprised if a trained Haltech technician would allow that to happen. It probably hasn't been confirmed yet that it's actually a rod, or rather rod bearing, but it does sound like rod knock to me. Then again, I've heard other things like a leak in the exhaust manifold, valves, cams etc make similar sounds.
@@mtauta I'm guessing he fell asleep on his phone or set something on the keyboard or something like that... had that happen once; got a notification the next morning on a video I was certain I had never seen lol, turns out I sleep comment nonsense...
The 1zz loves boost. I maxed out an STI blow thru MAF on my MR-S, calculated to 300 crank hp, and the engine was fine. To be fair I had a MWR return style fuel setup. Big 16g turbo, air to water, 600ish injectors and the ancient Power FC. Good job guys!
For the record lotus run the 1.8 2ZR engine in an Elise supercharged at 217bhp at 6800RPM and in the Elise 250 have squeezed out 245bhp at 7200RPM. Standard Toyota Compression Ratio of 10.0:1, 0.8 bar of boost. All is not lost for Yaris Hilton.
Great info. I think the Cup 260 pushes it a bit beyond 245 bhp. Before I decided to turbo my 2ZR -swapped Yaris RS, I read a fair bit about the engine's capabilities. Although I believe that the Elise used a completely stock 2ZR, I have not been able to find any info to the contrary. Reading what you posted makes me confident that I should be ok at about my 0.55 bar boost. Thanks for the good info. Here is my car: ua-cam.com/video/qH2HCcNXF28/v-deo.html ua-cam.com/video/6eJXEtcY0RQ/v-deo.html ua-cam.com/video/fFvwnmc09Qc/v-deo.html Swap thread: www.yarisworld.com/forums/showthread.php?t=61176 Turbo build thread: www.yarisworld.com/forums/showthread.php?t=61699
I'd like to say that I admire the effort! Also don't use the internal waste gate or the boost pressure spikes and things break...(I've heard) You guys are great! J.
@@TomF1F1Gameplaysandmore Yeah he's like that embarrassing uncle that always puts his foot in it. This gag seems to be popping up in a few youtubers these days awesome to see. Love a bit of All Aussie Adventures!
The 1ZZFE i have is 125hp stock lol to make 200 isnt bad. Id lile to knpw what the corolla they gpt it from. Mime only have single vvt, theirs has dual vvt.
Malbro fuel pump for the win. Already been looking into a ebay turbo for my 1ZZFE 4 banger corolla. With a bigger set of injectors never have a fuel issue ever again.
That ending hahaha didn’t see that one coming haha looked like it pulled hard for like 10 full seconds before Rodney decided to come knocking haha awesome stuff good work guys 👍🏻👍🏻
man the jokes have been on point in this yaris series "page up page up page up" also that not so awkward handshake and hopefully also the knocking sound at the end haha
when everyone's buying wrecked supercars, 2 aussies are in the shed getting 2hundy horse from a yaris. love it🤙🏻
and Cleetus Mcfarland bought a RACE TRACK..
2 hours of fun lol
2hundy😂
1
I'm working on showing dart what they should have made with the dart. You don't take a track car like a guilietta or a rally car like an Abarth, tune it for economy, and sell it with a muscle name.
No, my aero is dropping the Dart badge being renamed aerow, and being built right. All I got left to do is wheels, exhaust, and a tune.
When a couple of Auzzie's take a wrecker spec engine, transplant it into a terd. Slap in a spit ball turbo and make two hundred HP...I've seen it all
And immediately proceed to lunch said wrecker spec engine
only in straya
Dude. Spoilers.
and then watch the end
Pressing the “Page up” with their toes
Return of the Foot! (OG reference for those that get it...)
That's how you create foot pounds
I'm torn between wanting to know who's toes those are and not wanting to know.
Wretched Excess it’s Marty’s
@@Fz-bo7sm LOL
Are we not gonna talk about how terrifying a 200 HP Yaris would be to drive?
19:38 Knock knock. Who's there? Cylinders 2 & 4.
Hehehehehehe
Maybe a slightly built “big” block and the same setup.....
Cylinders 2 & 4 Who?
@@d34dsc3n3 You don't know them....some guys from my village :P
Page up Page up Page up
"Random toe"
Omfg that's what I thought 😂😂
Thought I was going crazy
holy shit that is a toe
I fricking thought it was a toe lmao
Hairy toes
The energy is on another level.. this is why MCM will always be my favorite you tubers
R A Absolutely! These are the shenanigans for which I watch MCM.
Love the energy #BDE
PAGE UP! PAGE UP! PAGE UP!
Over the top and unnecessary, cringe.
What a gentleman Scotty is, I love his modesty even though he's still observed as an ECU king!
"only way to see how it will affect the rods is seeing one first hand...... and second hand depending on how many came out" I spit out my drink
Scotty is an absolute Legend
haha same what an absolute cack 😂😂😂
this isn’t his first con rod joke 😂
I thought that was pretty good too
"Page up" shirts need to be made .
ᛉᛟᛗᛒᛁᛖᚲᛊᛒᛟᛗᛒ you notice the foot ?
Pretty sure Haltech already have some 😁
Page up shirts for days mate 👌 hopefully
Kip I was thinking is that Scottys foot?? WTF??? 🤣🤣
And "Page Up" socks to compliment the shirt.
- knock knock
- who's there? subaru?
- no, it's me, your yaris hilton conrod
the third :)
knock knock
whos there
rodknock
It’s actually Rodney
@Henry XL most probably - conrod bearing
-knock knock
-who's there?
-the kock sensor
$169 turbo with a $1500 engine management system....
No doubt that fuel system has a huge impact on the outcome. Doubt they could get as much power from the stock system.
Only change MAP s change everything. 150HP and easy 20
Exactly didn't add in the cost / price it would be for a loom/ecu/mapping and that be 2k plus?
He who has not eaten Kraft Macaroni and Cheese on fine china should cast the firs stone.
And an hour in the garage! (Could you not tell they were being really sarcastic?)
19:38 Yaris Hilton is good at telling knock knock jokes
@D.O.A. Rod who?
Uncle Rodney says hi
@@dposcuro Rod da'marge
@@dposcuro Rod the window maker...
Now it time to upgrade high performance piston because factory piston are weak for turbo
Knock, knock, knockin' on heaven's door
hiltons*
Hiltons back door
@@DevinderAthwal306 epic 😂😂
*rod smashes through the block*
"HERE'S RODNEY!"
"no respect"
sounds like bearing to me
@@exvils Yes, a Rodney bearing.
19:40 immediate engine knock XD
Damn it sounds so good until it started knocking 😭😭
It doesn't sound happy at all at the end aye...
I hope it was just a joke edited in. Please be a joke.... I want to see it go around the track at least once. Well, either way, it was entertaining.
@@user-dj1hy6zc6q next episode : they are gonna forge a 2zr XD
Just needs race fuel now lol 😂 It'll clear that knock up real quick!
@@user-dj1hy6zc6q Top notch sound editing if it was a joke. I know they're both audio professionals but that was some extremely convincing editing if that's what it was.
This is Black Turd, coming back for revenge from the Blue Turd.
Blue Turd was my favorite
Turdo
There's been more than one blue turd on the channel, almost every couple of years it seems like.
Black turd already got rod knock looool
@@Perisicdarian which is appropriate, once you have black turd, should have that looked at.....
That knock........... I'm shattered! I was sooo keen to see how Yaris Hilton would drive.
Went quite well ... for one outdoor pull at least!
"Knock, knock" "Who's there?" "It's ya buddy Rod!"
17:09 for results
Let's keep it 69 likes
nobody pressed that
19:42
“Page down, page down, page down, page down.”
😭😭😭😂😂😂😂
Noooooo u didn't see that comin😭😂
@@alexanryset1404 did too lol they shoulda not put that one more degree of timing or added the fuel. more fuel yes more cool, but more fuel also means more cylinder pressure. the extra fuel more than timing is more than likely what rod knocked that 1.8. lessons learned, if i ever do this i'll add clearence to bottom end bearings and add .002 to the ring gaps. i read an article that said a 2 ZR would handle 200ish wheel horsepower easily with these additions, and additional oil flow.
lets just gloss over the fact that the Haltech ECU costs more than the whole car.
i was thinking the same lol
I was going to make the same comment lol
Lol as soon as I saw the Haltech logo I threw the drawing board away.
And still they call it a cheap option like is only 1 day of work 1000 dollars 😂😂
Hmmmm, Yaris was 3000AUD, and a 750 goes for 1500-2000AUD on the haltech website (probably even less at a reseller) but i get what you mean, ECU is a big obstacle on the way for me too :/
most epic part of the video: last 15 seconds...just awesome!
As an owner of a second generation Yaris, I'm so proud
Y that it's got a Corolla drive train to get it from a to b 🤣🤣🤣🤣
"oh cool 169 dollar ebay build dope"
*has a haltech*
"okay so it's a 2169 dollar build"
@@Big2009Gee nah haltechs are cheap, Yaris's have spiked in price since Yaris Hilton! Oh and that $169 turbo is probably $369 on eBay now!🤣🤣🤣
And the intercooler and the piping, manifold etc, etc, etc. Plus obviously the $1K dyno time.
Where do they say it is a 169 build?
It’s a 169 dollar eBay turbo, not the whole build jawng
You probably didn't watch the previous episodes where they listed the cost of the build. It's way over nin...three thousand already.
The $169 is a recurring joke.
"budget turbo" as Moog plugs in the Haltech elite LOL
Into a custom harness.. in an imported swapper engine... with various parts-machining to fit things.. and a new imported engine mount with a JDM tax.... and a new fuel pump... and a professional dyno day.. not including labor from all the mechanics' work for several days XD
to be fair they do that to save time and money (haltech supplies MCM parts for cheap/free i think), could be done differently if it was your personal project car and you were modifying it over the winter not over a couple of weels like marty and moog do...
Yaris Hilton: Begins engine knocking at 19:42.
Scotty Kilmer: Sweating intensifies.
💀💀💀
Fucking hilarious!
Lmfaoooooo
Scotty Kilmer yells That's a perfectly good car! Almost as good as my celica!!!
nah right now he's making a video called "MCM changes the game" or " I was wrong about ebay turbochargers"
so, the ghost image at 5:20 and 5:24 in the window opening, just to the left of tuning fork's shoulder is a bit creepy.
Hollyshit
it's the ghost of horsepowers passed leaving to make room for new ones!
turning this yaris into a demon
Man that is creepy. How did ya even notice that?
Oh crap, now I see it 😱
Looks like the boys ended up calling Uncle Rodney.
Would say its the bearings
at least he knocks before coming in
"Next time on MCM, DIY forged parts engine rebuild for $169"
Definitely spun a rod bearing at the very end there, didn't they?
@@jstein77 Nah man, that was too loud, not even a 2,5 4cyl sounds that bad with just a spun bearing. Pretty sure that was the lovely sound of a broken conrod hammering at the the block #YarisHiltonKO
@@VikingRul3s Can it even be running at all with a broken con rod? It would probably have ventilated the block if it broke.
@@jstein77 true, that's a likely case and yes, it can run, the power for the last 3 cycles will overpower the resistance from the broken. I mean I could be wrong, it could just be a broken driveshaft or a destroyed gearbox. But I'm still fairly certain that the sound was being too loud to just be a spun bearing
🤣🤣🤣🤣🤣
"the only way is to see these rods first-hand... or second-hand, depending on how many come out" 😂
Fan part giveaway time ?
modern day poet is tuning fork
I'm glad you did this video. It goes to show that a good engine with a properly installed EBAY turbo can be fun and worth every penny. Not saying name brand turbo's are not better , of course they are. But everyone can't afford them.
Alas, after all that Tuning Icarus was found to be flying to close to the sun :(
“You’re gonna love daily-ing this thing man, sell the golf, turbos in the same spot, what’s the difference?”
“Page up page up page up”
Think you should watch till after the credits mate
Edit: Didnt realise it was marty who'd said this as was distracted getting ready for work when I watched the episode.
@@reverberer that was just that was marty to blair said.....
@@megunded Thank you kindly for pointing that out. I was only half paying attention this morning as was watching while getting ready for work and missed marty say this.
Oi I didn't know page up skipped a whole minute. Thanks mate
knock knock...
who's there?
Big end bearing - I have your friend Rodney with me. 😂
Big end bearing? Lolol you mean connecting rod bearing 🤦♂️
@@FriedEggsandJellyfish Err no, he means big end bearing. A connecting rod can have two bearing surfaces so calling it the connecting rod bearing is ambiguous. It's big end or little end.
@@ferrumignis err no. If you're uneducated in the matter and get your information from reading motor trend magazines than sure. In the industry, you'd get laugh at for pronouncing it that way. the "big end" is attached to the offset journals of the crankshaft. There are only two bearings used on con rods. Not sure why you'd need to specify "big end" for bearings. Unless you can magically use bearings on the "small end", which errrr no you can't.
@@ferrumignis it's big end or little end. If you never touch the inside of an engine. Otherwise, it's a rod cap bearing typically with a notch and hole for oil squirter.
@@FriedEggsandJellyfish right. Who the fuck says big end. Must be shade tree UK mechanic talk.
Those Corolla engines are quite strong. My TC has been putting down 260whp for over a year no problem. That’s obviously the 2.4l version though
That's the 2az F.. Camry
I love that the first dyno run, due to the limitations of the Yaris fuel system, they made less power than the 2ZR-FE did in stock form. lmao
That end knock tho...
they made about the same(little bit more) (88.6 Wkw, while the stock 2zr-fe made ~~~ 100kw ) and we all know Wkw != kw
Elwood: Oh no.
Jake: What the f*** was that?
Elwood: The motor. We've thrown a rod.
Jake: Is that serious?
Elwood: Yup.
MrButtonpresser THE BANDDDDD
MrButtonpresser Just need to keep some newspaper in the car to wipe the oil off the windshield.
@@SickWill who?
Fix the cigarette lighter.
You traded the Bluesmobile for THIS?
That ending was perfect XD
'page up' is my new favorite phrase this year!!!
The last few seconds truly made me sad, especially because I was shocked at how good it sounded, until. well, you know . . .
same that was an AWESOME yaris. Then it sounds like it threw a rod :/
@@davidlp3019 Mate it wouldn't be making any sound if it threw a rod lol
@@VoidSixx well its rod knock haha
Maybe a death sparkplug
@@VoidSixx Wow you have no idea what you are talking about. But don't let that stop you giving advice ;)
I've never been more excited about a Yaris in my life. And I can say with certainty that I never will again.
Drew Toyota are releasing a 270hp awd Yaris.
Knock Knock
Who theres
Yaris hilton engine knock
RIP was so young :(
Knock Knock
Who's there?
Rod :3
It's funny cause the car is dead now
@@HuxTheSergal true
As someone who has a Yaris as a backup car when the Honda is in the shop I love seeing the Toyota get the love it deserves.
Well that ending was depressing :(
That "ticking noise" is always a good sign of a well run in motor :P
It means it runs like a clock, and clocs tend to run good and long life :P
@@anonim1133 are you .. winding us up
12:13 - at first I thought that was a foot, then realised it's just Marty's hand.
Malcolm Cullen it was his foot
That wasn't his head with no hat?
Everyone knows in Australia the hands are where the feet go that's how they can walk around down there
"...big block swap out of a corolla..." Having grown up in the southern US that sounds hilarious to me lol
It sounded weird to us too as the term "big block" is an American term which is not used in Europe or anywhere else that I'm aware of!! I think he made it up to try to sound american but has used it totally out of context lol!!
Europe being where I'm from btw, I know they are from Australia lol
MCM: lets turbo a yaris
Toyota: They're up to something maybe we should do that to the new yaris we are releasing
Richard G. @MightyCarMods, can you buy a Silvia 😉
But they already did ;) 1,8 vvt supercharged, 212 bhp (if i remember correctly)
@@VikingRul3s that was the Corolla
@@Lahautz Erhm they really did make a Yaris version with that engine too, why do you think MCM and everyone els knows a corolla 1,8 vvt fit in the car?
Toyota Yaris GRMN 1,8 vvt with supercharger (205 hp (153 kW))
@@VikingRul3s That's a different gen Yaris, tohis gen only had an NA 1.8. The Corolla T Sport came with the same NA 1.8 or could have a supercharger. It wasn't very fast though.
I love MCM. if you guys are reading this thank you for entertaining me so much. Keep up the good work.
19:38 Gues who's back! Uncle Rodney is back! 😂😂😂😂😂😂😂 i can't stop laughing!
I literally have a stitch in my rib cage from laughing so hard oh boy.
Rodney for the win.......na Rodney strikes again...!
"Our toyota yaris has been modified off it's ballsac.."
I thumbs upped the video immediately
The Haltech GUY was right. 100 kw at the wheels- no more, otherwise you’re risking a blown engine.
19:32 watch the end 😂👍
It went boom already man watch till the end
Omg!
The 2ZR-FE is capable of much more than 100 Kw at the wheels, providing a good tune (good fuel, good fueling, good intake temps and not too much timing advance etc). There are tons of them running around with forced induction and 135+ Kw wheel. There must have been something wrong with the engine from the start or it went lean and detonated, though I'd be surprised if a trained Haltech technician would allow that to happen. It probably hasn't been confirmed yet that it's actually a rod, or rather rod bearing, but it does sound like rod knock to me. Then again, I've heard other things like a leak in the exhaust manifold, valves, cams etc make similar sounds.
@@acbent11 150 Kw in the end of the video
Outside of the foot, by the 3rd time I heard "page up" I was expecting a plastic hand
Now put some black mesh in front of the intercooler just to make it a super granny sleeper😍
Are you braindead? Why would they cut the bumper just to put mesh on it?
Get the Supercharger from the Lotus Elise
When dealing with toyota, the technical term for power is killer wasps
Hiting END-Key, Yaris instantly breaks Nordschleife lap record.
19:39 Now I can't wait for the next video to see how bad the damage is.
bfsd Eh m, let
G I
Lrr r t4t556iqqqqqqqqqq2233 er y 56 young db Cy Byng him om 소포 ㅇ ㅋ ㄱ
Jrelyq Koiatu what
@@mtauta I'm guessing he fell asleep on his phone or set something on the keyboard or something like that... had that happen once; got a notification the next morning on a video I was certain I had never seen lol, turns out I sleep comment nonsense...
@@Fetidaf he's just confirming their order for Indonesian food
@@lordgoofus2364 It WAS a corolla 1.8 engine
The 1zz loves boost. I maxed out an STI blow thru MAF on my MR-S, calculated to 300 crank hp, and the engine was fine. To be fair I had a MWR return style fuel setup. Big 16g turbo, air to water, 600ish injectors and the ancient Power FC. Good job guys!
That face 5:19 things we cannot unsee
100,00 Indonesian Rupiah = 10.81 Australian dollars, according to Google. WOW, what a bet.
mike krum and 10.81 is like 37 cents US.
Binford2500 $7.28
$7.28 USD. Sweeeeet.
LauraScaped r/woosh
That's enough for a coffee at the local 7-Eleven.
I was on the toilet when I got the notification and I almost fell off laughing when they started chanting "page up"
PAGE UP! PAGE UP! PAGE UP!
Same
did you see the foot lmao
YO SAME!
@@mrrooter601 not until someone mentioned it in the comments.
For the record lotus run the 1.8 2ZR engine in an Elise supercharged at 217bhp at 6800RPM and in the Elise 250 have squeezed out 245bhp at 7200RPM. Standard Toyota Compression Ratio of 10.0:1, 0.8 bar of boost. All is not lost for Yaris Hilton.
Great info. I think the Cup 260 pushes it a bit beyond 245 bhp. Before I decided to turbo my 2ZR -swapped Yaris RS, I read a fair bit about the engine's capabilities. Although I believe that the Elise used a completely stock 2ZR, I have not been able to find any info to the contrary. Reading what you posted makes me confident that I should be ok at about my 0.55 bar boost. Thanks for the good info. Here is my car:
ua-cam.com/video/qH2HCcNXF28/v-deo.html
ua-cam.com/video/6eJXEtcY0RQ/v-deo.html
ua-cam.com/video/fFvwnmc09Qc/v-deo.html
Swap thread:
www.yarisworld.com/forums/showthread.php?t=61176
Turbo build thread:
www.yarisworld.com/forums/showthread.php?t=61699
"This thrashed wrecker engine good for delicious delivery of late night kebabs or booty calling that sweet sweet eggplant doughnut."
Had me rolling😂
never in my life have i ever seen two blokes get super excited about 100kw haha :P
Do you not agree with the power to weight ratio argument?
@@ILOVEDASTIG well who cant but 100kw is 100kw lol
he doesn't get it ;)
Me neither
150kw bud...
Who also thought the whole time “come on this time it’s gonna blow up” lol
Hey man, in every dyno run I took away my headphones thinking the same 😂
19:35
Every damn time they gave it the beans.
melvin cortes 😂😂😂
Jeffery Haley oh man 😂
really love seeing these custom mods over bolt on parts
MCM 2020 calendar - get on it mightycarmods.com/collections/books/products/mcm-2020-calendar
Would you guys ever make a number plate frame? I think that would be really cool.
Mighty Car Mods Ball sack
I just bought some air fresheners! I'm from the UK! CHOPPED
200 is not magic number in this case? Lol.
you should use the 1.8 gearbox which is 6speed . in will be maddd😁
I may believe that they will need another Yaris engine scan tool...
"I may believe that they will need another Yaris engine..." fixed that for you
Yeah... "I may believe that they will need another Carolla engine for that yaris"
Fixed it for y'all
"I believe that they may need another Carolla engine for the Yaris" Fixed
Y'all missed the fact that marty and moog referred to the original corolla engine before the swap as the yaris engine scan tool...
@@chriserz94 hmm.. must have
"Page up page up page up" 19:42
Horribly Honest underrated lol
i want a top with page up now
Had me creasing when he used his foot for page up!
@@aaronmatthews9670 For me it was when Rodney and his simple twin brother said hello, I had tears in my eyes got a stitch in my rib cage and all.
A Yaris... with 200 at the wheels. That thing would be insane, and a crazy sleeper
"40KW to the wheels" Like, what is that in narwhal fortnights per hectare?
Terry's chocolate orange.
$7.32 US....... I finally broke down at the end of this videos and looked.
£5.62 UK ... I also couldn't let it go
$10.50 Australian... buy a hamburger, hold the french fries.
I scrolled through the comments until I found someone who figured it out lol
@@philthomas7140 $10.81 *
@@unfknknown9678 ok, so you can grab a 30 cent ice cream cone too. ;)
19:37 oh no it sounds like my BMW :(
thats my 320d
Those toes on the page up, though!! 😂
14:09 At this very moment, the ebay turbo sales go through the roof and a week later the scrap yard gets over clogged with blown up 1litres!
You'd have to really push it to blow it up 😂
I'd like to say that I admire the effort! Also don't use the internal waste gate or the boost pressure spikes and things break...(I've heard) You guys are great! J.
Everyone wins
19:42 The song of my people...
0:45 Hmmm something is off about that hand shake.
Russell coight flashbacks.
Collin Furze thing
@@TomF1F1Gameplaysandmore Yeah he's like that embarrassing uncle that always puts his foot in it. This gag seems to be popping up in a few youtubers these days awesome to see. Love a bit of All Aussie Adventures!
I kept waiting for moog to hit the side of the car with his hand, I feel like Marty would have screamed 🤣🤣🤣🤣
15:49 to hear the sound of a dial up model from 1997.
benit0___ 😂😂
This made me laugh too hard 😂😂
19:32 ooofft 😆
Ouch😂😂
nooooooooooooo
Rip motor😭😂
Marcus Cokain Next video, BANG!
sad ending. I was hyped to tuned the little engine, and ready to go down all the way. Hopefully, the 1.8 1ZZFE can handle the boost.
The 1ZZFE i have is 125hp stock lol to make 200 isnt bad. Id lile to knpw what the corolla they gpt it from. Mime only have single vvt, theirs has dual vvt.
19:38 Insert Knock Knock jokes here.
Knock Kock
Who's there?
Piss
Piss who?
Piston crack-ack-ack-ack-ack-ack-ack-ack
Knock knock
Who's there?
Page
Page who?
PAGE UP PAGE UP PAGE UP PAGE UP PAGE UP
Knock Knock
Who's There?
I am the one who Knocks....
Uncle Rodney is the One who Knock Knock Knocks.
Knock knock
Whos there?
I am your clutch little Yaris Hilton 😜😜😜😜
The page up clips with the random foot made me laugh every time
Ignore the douche bag Grainsauce. His funny bone is stuck up his arse.
@@Squashed8Ball I will he clearly doesn't have a sense of humor, I'm sure Moog and Marty thought it was funny too.
I need a “Page Up” T-shirt in my life
www.haltech.com/product-category/stickers-clothing-and-merchandise/haltech-vintage-t-shirt/
Read the text on the back ;)
@@haltech That link goes to a blank page for me... ;_;
@@haltech perfect ahaha
stock low in all sizes, i wonder why 😂
Only if it features a picture of a toe
Malbro fuel pump for the win. Already been looking into a ebay turbo for my 1ZZFE 4 banger corolla. With a bigger set of injectors never have a fuel issue ever again.
On today’s episode of blue ballers: we finish.
Ethan Thomas LMFAOOOOO SERIOUSLY THO😂
I love the Yaris series. Turbo other small economy cars like the Mazda2, Kia Rio, Hyundai Accent
Joel Fuentes some hyundai accents came with a 4g63
I like Protons. They like Turtles with a Supercharger to it.
@@jurgen6362 I searched it, and I saw it was in the early 90s. That was pretty sweet.
@@markoz673bajen8 We don't have those in the U.S. The Peugeot is a nice looking Europe small car.
14:30 is that a foot? 😂
No
Yeah no the second keyboard scene cut is definitely a foot
scotties?
No, that's a hand. Don't make fun of Tuning fork... Your hands upgrade when you tune JDM cars daily.
That's definitely a small person's hairy hand that looks exactly like a foot.
Scotty Kilmer's gonna upload "Why not to turbo your Yaris Hilton"
That ending hahaha didn’t see that one coming haha looked like it pulled hard for like 10 full seconds before Rodney decided to come knocking haha awesome stuff good work guys 👍🏻👍🏻
man the jokes have been on point in this yaris series "page up page up page up" also that not so awkward handshake and hopefully also the knocking sound at the end haha
"its like a dollar but different" followed by a minute of awkward silence hahaha i felt that deep
Great help we just turbocharged my Corolla 2019
*_WAS THAT A FOOT HITTING PAGE UP_*
... the engine is fine , it was already junkyard motor and now its going back home :D
Tuning fork with the hands Quentin Tarantino would die for
Thats just nuts !! 200 hp in a yaris,
A bloody Yaris !