Been doing FPV quads for 8 years now. Still learning-appreciate you explaining the contrast between fixed wings and multirotors. Also, even if I’m not learning new points, I really appreciate the effort you’re putting into the channel and these clear and thorough informational videos. Cheers Pawel!
Love your content! Always full of great information. Is there a way, or is there information available on converting a FC target from Betaflight to a target for iNav? Is it incredibly difficult to convert? I have a dozen F7 T-Motor and Hobbywing FC's and I'd love to try iNav with one of those. I currently use some old F4 Matek FC's, but they are getting pretty ancient.
Morning Pavel I have been constructing quadcopters since the days of clean flight and kk 1.2 boards I'm having a problem with a speedy b f405 version 3 board where the elrs receiver connects to my tx16 transmitter and works and shows up in beta flight version 4.4.3 but as soon as you power up the quad with a battery you totally lose the control linkage this is something I've never come across in all my years of flight controllers and many quadcopters that I've made and I have no idea I have only four items connected to these flight controller the elrs receiver on txrx 2 a vista digital system on txrx1 and the GPS on txrx6 and a buzzer connected to the relevant buzzer points all seem to work fine when they quad is connected to the computer but when the quad is powered up still connected to the computer I totally lose receiver connectivity I'm hoping you can help me with this strange problem thanks again Pavel
Hi Pawel Your videos are great Requesting you to make a video on INav 7 for VTOL plane with 4quad motors for vertical takeoff/landing and normal plane motor for Horizontal plane flight
Cześć Paweł Fajny filmik i twój komentarz niestety nie znam angielskiego tłumaczenie na pl daje ogólne pojęcie. Głównie latam samolotami jaki poleciał byś kontroler do samolotu?👋
Привіт. Чи можливо змінити "Output Mapping" для моторів? Якщо в мене S4 пін не працює на FC, я додаю 5й мотор, припаявши його до іншого піна "S5". Така сама ситуація з серво, я його припаяв до іншого піну, але FC веодно показує минуле налаштування.. Можливо прописати або якось поміняти в INAV піни, якщо припаяно по іншому? Дякую.
Hallo ich möchte einen Copter bauen und habe noch einen Mateksts F722-hd meine frage wäre ob ich denn mit inav verwenden kann. Eine DJI O3 möchte ich auch noch verbauen
Great video and nice summary/break down of modern FC's. The CC3d board was a great FC. Would have liked to have seen the continuation of those boards as they were PWM plug and play..but everything changes.
@@FPVUniversity Bro KINDLY help me regard dis pls 1. 6s or 8s charger to go right now I have 6s batt 2. Toolkitrc la lot of models which one to go pls seggest a model 3. Can I use 60W Mobile charger head to charge toolkitrc charger. If not means kindly suggest budget power supply Kindly guide me bro, Thanks in advance.
@@FPVUniversity Sorry i thought u as Ukrainian. Can u tell me that this FC can also be used for helicopter?? And if u let us knw abt ESC protocols would be great and thnx😊
Hey.. Its nice to have it all explained in plain language. . Slow down a little.
You know they have a playback speed option on YT right?
Wdym he is talking really slowly i put it on ×1.25 speed lol
Been doing FPV quads for 8 years now. Still learning-appreciate you explaining the contrast between fixed wings and multirotors.
Also, even if I’m not learning new points, I really appreciate the effort you’re putting into the channel and these clear and thorough informational videos. Cheers Pawel!
Fantastic video. Woul it be there chance to get private consultation? Planning to build boat. Need to chose hardware. Thanks in advance.
Video is too long but good information thanks.
You have a unique knowledge of electronic flight control, great to listen to you ...joe
thank you!
Love your content! Always full of great information. Is there a way, or is there information available on converting a FC target from Betaflight to a target for iNav? Is it incredibly difficult to convert? I have a dozen F7 T-Motor and Hobbywing FC's and I'd love to try iNav with one of those. I currently use some old F4 Matek FC's, but they are getting pretty ancient.
Morning Pavel I have been constructing quadcopters since the days of clean flight and kk 1.2 boards I'm having a problem with a speedy b f405 version 3 board where the elrs receiver connects to my tx16 transmitter and works and shows up in beta flight version 4.4.3 but as soon as you power up the quad with a battery you totally lose the control linkage this is something I've never come across in all my years of flight controllers and many quadcopters that I've made and I have no idea I have only four items connected to these flight controller the elrs receiver on txrx 2 a vista digital system on txrx1 and the GPS on txrx6 and a buzzer connected to the relevant buzzer points all seem to work fine when they quad is connected to the computer but when the quad is powered up still connected to the computer I totally lose receiver connectivity I'm hoping you can help me with this strange problem thanks again Pavel
Hi Pawel
Your videos are great
Requesting you to make a video on INav 7 for VTOL plane with 4quad motors for vertical takeoff/landing and normal plane motor for Horizontal plane flight
Cześć Paweł
Fajny filmik i twój komentarz niestety nie znam angielskiego tłumaczenie na pl daje ogólne pojęcie. Głównie latam samolotami jaki poleciał byś kontroler do samolotu?👋
Привіт. Чи можливо змінити "Output Mapping" для моторів? Якщо в мене S4 пін не працює на FC, я додаю 5й мотор, припаявши його до іншого піна "S5". Така сама ситуація з серво, я його припаяв до іншого піну, але FC веодно показує минуле налаштування.. Можливо прописати або якось поміняти в INAV піни, якщо припаяно по іншому? Дякую.
What is the target of the JHEF405PRO
"We have to have a brain" - truer words have never been spoken! :D
Hallo ich möchte einen Copter bauen und habe noch einen Mateksts F722-hd meine frage wäre ob ich denn mit inav verwenden kann. Eine DJI O3 möchte ich auch noch verbauen
Great video and nice summary/break down of modern FC's. The CC3d board was a great FC. Would have liked to have seen the continuation of those boards as they were PWM plug and play..but everything changes.
You can say whatever you want about CC3D, but no, it was not great :) In many ways it was an inferior to Naze32 for example
Lots of great information here Pawel. Thank you.
Glad it was helpful!
Simply very clear presentation. Thanks a lot brother. Pls keep it up
Thanks and welcome
@@FPVUniversity Bro KINDLY help me regard dis pls
1. 6s or 8s charger to go right now I have 6s batt
2. Toolkitrc la lot of models which one to go pls seggest a model
3. Can I use 60W Mobile charger head to charge toolkitrc charger. If not means kindly suggest budget power supply
Kindly guide me bro, Thanks in advance.
Thanks for all the info, Pawel! 😊
Stay safe there with your family! 🖖😊
My pleasure!!
Thanks! Well done!
Glad you liked it!
Hello Zeleneski, thnx for uploading...
Learned sme basic on FPV. 👍
The "Zeleneski" part not that funny as I'm not Ukrainian. But thanks anyway
@@FPVUniversity Sorry i thought u as Ukrainian.
Can u tell me that this FC can also be used for helicopter??
And if u let us knw abt ESC protocols would be great and thnx😊
@@fklotaloiHey orc, why aren’t you on RuTube, or at the front?