You guys are absolutely killing it with this series - while the production value is fairly low its actually perfect for what it is - you guys are showing you don't need fancy this or that - you need good chaps with great chemistry and personality - and of course interesting petrolhead content!
@@S72MAD_faceless Riiiiight, sure they are. No clue what you're referring to but you do realize that one UA-cam channel doesn't own an idea and that many channels do very similar videos and or ideas and it's in no way "ripping someone off", right? Actually from your comment no, no you don't understand that. Either way these guys are, in my opinion, MUCH more fun to watch than the Donut guys - nothing against them but they aren't at all my cup of tea and I suspect from the success of the channel and this series others agree. Demonetized for doing similar videos, wow, if that were remotely true most of UA-cam would be demonetized. HAHA
Shame about the cheap exhaust. Should of bought a better unit which is would fit and work better. You had a big budget not the normal subaru owners one. 🙄
I don't know, I really liked to see them sort of fumble around and figure things out. I feel like they brought in a Subaru Jedi Master when they called you.
You may have nearly 6k leftover, but if you counted in Richard's pay after this headache, then surely this project is over budget! 😅 Mechanics like him are priceless.
I agree, I think also because this car is not too expensive they don't have to be very careful with it, they can trash it around. Plus the mods are closer to reality to us then let's say staging an Audi R8 and being " ohhh it's so fast I wish you can feel how fast it is ".
11:49 is very relatable, as is 12:25 Whatever you all pay Richard, it isn't enough 😂 Love the series! It actually brought me to the channel. Love how relatable the content and the hosts are!
as a wrx wagon owner as well. the up pipe is a dick of a job to do. for anyone watching who is going to do the same job. undo the two bolts on the engine mounts. undo the a bolt on the pitch mount seeing as youll have the intercooler off already and jack up the engine with a block of wood under the sump. ive removed a catted up pipe from a bugeye wagon and recently a 03 turbo foz this way. means you you don't have to remove the turbo. and, underrated mods to do to these cars. group n sti gearbox mount. upgraded pitch stop mount (whiteline, perrin, ect), rear sway bar and heavy duty mounts. top 3 mods to do.
If Richard weren’t around, you lads would be done for. I mean he fits a pipe that doesn’t fit, he does stand up comedy, he attends to medical emergencies. Multifaceted individual. Main character, no doubt about that
That dyno must be VERY generous. I have a 07 wagon and had to put a a VF48 turbo, grimmspeed top mount, id 1050 injectors, TGV delete, and full turbo back exhaust to get 298HP… with a 2.5 L…..
Wrong. Engine dynos measure crank. Chassis dynos measure whp. Since the engine was in the car and the car was on the dyno it was whp. Which is weird, because those numbers are pretty dang high for stock turbo and IC.
Gotta agree with the other comments, I am really enjoying this series. You really don't need fancy editing or equipment to make a good video, just good connections and a good idea. You guys are really making something nice happen with all of these extra guys and involving yourselves so much. It's not like "we dropped it at the shop and they fixed it up for us", it's: "we got down and dirty for 2-3 days working on this, eventually we had to give it to the shop because it's just out of our expertise, but we did most of the work". Really adds a nice personal touch to it that makes me all the more invested. Plus bringing in experts to really give it a specialty touch, with Richard and Duncan being specialists in the field.
This video perfectly sums up what it is like to work on a Subaru, a massive ball ache but worth it when all done! Good work guys, and still with £6k of the budget left!? Get a forged block, bigger turbo and FMIC and it will be a monster! By the way, I think the stock injectors were 440cc's
Forged block for 6k is a bit much. You could do rods, pistons and an sti vf34 turbo, not accounting for labour that should work. A ej207 sti engine can hold about 360hp (with stock turbo) with rods/pistons about 400. Depending on how different the wrx ej205 is anywhere between 360 and 400 is possible
It's pretty wild how big of a bump in power you can get from bolt-ons and a tune. Modern turbo cars are pretty impressive. There was a time not long ago where to see that kind of gain, you had to go from NA to forced induction.
More racing stripes! More vents! Racing stripes tell the air where to go, for faster acceleration, and higher top speed! Each stripe = 3hp. More vents = more cooling = more efficient = more fast. More vents also means more holes, making the car lighter!
Been really into these series now, having 2 Subarus myself and did exact same jobs you did byself without any experience was a 'cancer', but gained loads experience . Funny enough I had exact same exhaust blow lol. Keep the great work, this is true enthusiast stuff!
Dumping a bunch of dry ice on the sound deadening material on the floor will help break it up, hammer it to small bits before dumping it directly on the material and it will make chiseling it off much easier.
Anybody still remember how the car still had to be "practical"? I wonder how fast the Subaru would still be with your moving stuff in the back of the "van:?
Ребята, вы не представляете как я ждал новую серию. Для понимания, я загружаю эту серию с ужасным интернетом уже 15 минут и смотрю при помощи переводчика, но это всё ровно стоит того! С нетерпением жду новый выпуск!
Great job. The juxtaposition of the downs of spannering to the highs of spinning it up on the road says everything about why folks even bother in the 1st place. Well done lads
For future reference, to get the up pipe out, I unbolted my headers, and I took out the bolts that mounts the motor to the subframe, then jacked up the motor, should just slip out if you do it right. No need to unbolt the turbo
Well you found out the key to Subaru... Working on them with turn you into a bloody unicorn 🦄 hahah quite the bump there mate but welcome to the subi life haha
I spent more then 2k on my car so far in just performance parts. GDI 2.0t on e50 with aux fueling. Has 2 extra 42lbs injectors on throttle body that only spray under whatever throttle position I have them set up at. Helps keep my valves clean also.
Spark Plugs: I'm reading that more expensive plugs are not higher performance, only longer lasting. The cheaper copper plug, or most expensive gold, are the best conducting and highest performance.
Put the vf48 turbo and the sti intercooler very cost efficient and works really good for track and then use the other bit of money for a 4:44 diff with the 5 speed transmission
I have been subbed since the first episode of this series and wow! It really shows how you don’t need much to make performance. I’d also like to add a ❤ for Duncan!
This whole series is like a wierd "mirror" of everything Ive done/plan to do with my black 5spd, 05 Saab 92x aero "Saabaru".. (wrx wagon). It already has a Cobb "stg 2" turbo-back exhaust & Access port tune. But I plan to set it up for AutoX/track driving as well. And just like them, my factory clutch is almost dead at 180k miles lol, I'm going to get the exact same BC coilovers, vinyl wrap it black, get new rims & tires, big brakes, upgraded cooling/oiling, possibly strip out some of the interior & extra sound-deadening (but not everything like them), and I also have an exhaust leak. There's several other things that are weirdly identical to them from earlier videos.. I can't remember all of it though. But awesome series getting to see this done on the same car as mine.. helps me decide what to buy🤘
Swabbed 800€ exhaust into Legacy R and it took ~60 minutes with smoke breaks. It would have been faster if I had used a lift like they did in video. Research into aftermarket parts you are going to install pays back massively, both in time and reduced headaches
I'd have probably gone with adding the bigger turbocharger per recommendation. That and possibly an upgraded drive shaft. Though, that's primarily because I get worried about throwing a rod due to excessive RPMs. 🤣💯
Little tip for next time... If you undid the engine mount nuts under the engine cradle, you would've been able to jack the engine up an inch on the offside to be able to get the turbo up-pipe out from underneath without needing to remove the turbo
Awesome, my favourite episode so far. I kinda hope that you don't QUITE beat the Lambo, so big turbo and intercooler gets done. It's actually turning into quite a car!
Hmmm... Something seems off with that power number. I've never seen a wrx with the OEM td04l make over like 250whp. That Dyno must either read very high, or there's some corrections going on. You're lucky to make that power on an ej205 with a vf39 from an sti.
Just a thought but would an E85 tune be a cheap-ish way to increase power even more? I honestly don't know how expensive it is or if it's even possible with your Subaru but maybe it's something to look into. Also I'd bet you could dial the suspension in even more than it already is. Anyway I really like this series and very much enjoy the chemistry between the three of you (and shoutout to Richard too lol). Thanks guys!
I almost wonder if it will be something accessible with the turbo and front mount. But it is meant to be practical, maybe E85 would make it unpractical given the access to the fuel itself
They're in the UK which means you cannot get e85 at a petrol station. Also if they did they would probably need to go for a flex fuel setup to ensure they weren't just limited to e85 alone. There are more cost affective methods of making power when you consider these things.
Should have gone with JapSpeed exhaust, full system for under £1000, unequal headers, up pipe, down pipe (with either decat or 200 cell high flow cat) and cat back, it all fits too 🤣🤣🤣
Bigger turbo will just easily break the ej205, because u are already at the top of its perfomance i think. ~380 engine hp is a max power for it unless you limit the torque up to 5000+ engine speed.. But u deffinitely need bigger top mount cooler or front mounted one for more stable perfomance. Cool series btw! Have the same engine with tiny ihi vf30 turbo and 1300kgs weight. Goes 0-100kmh in 3,8-3,9 sec.
Surprised you didn’t do a vf series STi turbo (not sure if yours comes with the td04 or not, in the USA it does) but we can find STi vf series in the USA used for 500-600 bucks, which would be a huge update. Anyway. Love this series
That little oil hose at the bottom of the turbo is a right PITA to get connected and clipped on properly. One of those jobs that needs miniscule hands and tools that haven't been invented yet.
I must say, 20-30 minutes on these types of videos is the perfect length. 12-15 is a bit too short for me
definitely
12 to 15 sounds like pretty long to me.
Absolutely agree
@@RayanM50B25 you obviously never watched top gear
@@RayanM50B25 honestly I think 5 - 7 is too long for anybody
You guys are absolutely killing it with this series - while the production value is fairly low its actually perfect for what it is - you guys are showing you don't need fancy this or that - you need good chaps with great chemistry and personality - and of course interesting petrolhead content!
Nothing beats watching car guys having a bad day then ended up with great results. I want this on a box set!
They just need to carry on ripping off DONUT MEDIA until they get demonetized
@@S72MAD_faceless Riiiiight, sure they are. No clue what you're referring to but you do realize that one UA-cam channel doesn't own an idea and that many channels do very similar videos and or ideas and it's in no way "ripping someone off", right? Actually from your comment no, no you don't understand that. Either way these guys are, in my opinion, MUCH more fun to watch than the Donut guys - nothing against them but they aren't at all my cup of tea and I suspect from the success of the channel and this series others agree.
Demonetized for doing similar videos, wow, if that were remotely true most of UA-cam would be demonetized. HAHA
@@S72MAD_faceless apparently making a car fast on a small budget is exclusive to Donut Media. Lol ok buddy.
Shame about the cheap exhaust. Should of bought a better unit which is would fit and work better. You had a big budget not the normal subaru owners one. 🙄
Wonder how much go faster stripes would affect the performance
Like 3 seconds a lap
Obv adds 3hp per stripe
cant believe ppl still dk this🙄🙄🙄
Red paint would give you 5 seconds easy, da red onez go fasta
at least +20hp at the wheels
At least 69 hp
Great result guys and great to meet you both 👍😎
Thanks for the tune! Just gotta beat that Lambo now! Callum
Mine is one of those blobeye wrx making 303 on a td04, you mapped it last year and still going strong
@@davidandrews4330 awesome David 👌
I don't know, I really liked to see them sort of fumble around and figure things out. I feel like they brought in a Subaru Jedi Master when they called you.
I've been loving this Subaru build series!
You may have nearly 6k leftover, but if you counted in Richard's pay after this headache, then surely this project is over budget! 😅 Mechanics like him are priceless.
These are always the kind of car videos I enjoy the most, not the supercars and the fancy shit, but the relatable stuff
I agree, I think also because this car is not too expensive they don't have to be very careful with it, they can trash it around. Plus the mods are closer to reality to us then let's say staging an Audi R8 and being " ohhh it's so fast I wish you can feel how fast it is ".
@@cleonzenasro2998 exactly, we can actually do the same things to our cars it just feels familiar
11:49 is very relatable, as is 12:25
Whatever you all pay Richard, it isn't enough 😂 Love the series! It actually brought me to the channel. Love how relatable the content and the hosts are!
Callum rapidly blasting F bombs had me with the dumbest cheek to cheek smile
What? You mean they should be PAYING him??? :p
WRX was a great selection for this series! Great aftermarket support for cheap mods. Keep it up!
The mods are cheap, but some things can take so much more time because the boxer configuration
@@b.w.9392 yea but then u start to forget all the annoyances as soon as u start driving
they copied donut media don’t support these guys
@@iCostiG how? Modding cars on a budget is a tale as old as time
as a wrx wagon owner as well. the up pipe is a dick of a job to do. for anyone watching who is going to do the same job. undo the two bolts on the engine mounts. undo the a bolt on the pitch mount seeing as youll have the intercooler off already and jack up the engine with a block of wood under the sump. ive removed a catted up pipe from a bugeye wagon and recently a 03 turbo foz this way. means you you don't have to remove the turbo. and, underrated mods to do to these cars. group n sti gearbox mount. upgraded pitch stop mount (whiteline, perrin, ect), rear sway bar and heavy duty mounts. top 3 mods to do.
I loved this ! This might seriously be the best content on UA-cam
That is amazing! I expected a 30-40 hp gain but holy crap did I underestimate. Thank you guys so much for this content btw, the chemistry's great!
you make 40hp on a totally stock motor with just a tune, with way faster spool up.
You've just got to know how to work on these .....if it's a weekend job probably book the week off aswell 🤣🤣
If Richard weren’t around, you lads would be done for. I mean he fits a pipe that doesn’t fit, he does stand up comedy, he attends to medical emergencies. Multifaceted individual. Main character, no doubt about that
That dyno must be VERY generous. I have a 07 wagon and had to put a a VF48 turbo, grimmspeed top mount, id 1050 injectors, TGV delete, and full turbo back exhaust to get 298HP… with a 2.5 L…..
They are reporting crank HP. But still pretty big numbers for modest mods on a 2.0.
Wrong. Engine dynos measure crank. Chassis dynos measure whp. Since the engine was in the car and the car was on the dyno it was whp. Which is weird, because those numbers are pretty dang high for stock turbo and IC.
Those numbers are at the wheel. They aren’t measuring at the crank
They are clearly measuring at the wheels. Those are not crank figures. Even if they were they would still be WAY high for that setup
@@boristheblade0954 "Driven Media
8 hours ago
At the crank. For some reason that's how we do it in the UK. Callum"
Gotta agree with the other comments, I am really enjoying this series. You really don't need fancy editing or equipment to make a good video, just good connections and a good idea. You guys are really making something nice happen with all of these extra guys and involving yourselves so much. It's not like "we dropped it at the shop and they fixed it up for us", it's: "we got down and dirty for 2-3 days working on this, eventually we had to give it to the shop because it's just out of our expertise, but we did most of the work". Really adds a nice personal touch to it that makes me all the more invested. Plus bringing in experts to really give it a specialty touch, with Richard and Duncan being specialists in the field.
Dyno and suspension setup will gain so much time.
Was thinking that too - a proper corner balance and track focused setup should gain at least 1-2 seconds with a capable driver, which they have.
Needs Anti Lift Kit control arm bushings. Pretty cheap too
@@jonathanphilips4510 are those worth it on the 15+?
This video perfectly sums up what it is like to work on a Subaru, a massive ball ache but worth it when all done! Good work guys, and still with £6k of the budget left!? Get a forged block, bigger turbo and FMIC and it will be a monster! By the way, I think the stock injectors were 440cc's
Forged block for 6k is a bit much. You could do rods, pistons and an sti vf34 turbo, not accounting for labour that should work. A ej207 sti engine can hold about 360hp (with stock turbo) with rods/pistons about 400. Depending on how different the wrx ej205 is anywhere between 360 and 400 is possible
Subaru are the easiest vehicles to work on
Easy 350hp to 400hp with front mount intercooler bigger turbo and exhaust, Walbro 255fuel pump, injectors and remap then your sorted boys.
A decent top mount would be better for this, they’re not chasing high numbers just a fast car
Shoulda done a down pipe at least though
Duncan is a breath of fresh air isn’t he? Obviously loves what he does, and shares in the joy of his customers when he’s worked his magic. 👍🏼👍🏼👍🏼
Even though I'm late to this series. You can see on his face, he enjoys what he does and love Subarus even more
FYI, the normal way to remove the up pipe is to loosen the engine mounts and jack the engine up on one side to rotate it out the way.
It's pretty wild how big of a bump in power you can get from bolt-ons and a tune. Modern turbo cars are pretty impressive. There was a time not long ago where to see that kind of gain, you had to go from NA to forced induction.
Definitely intercooler needed. And with those supporting mods you can easily go bigger turbo
The joys of subaru flat fours... loving the series!
More racing stripes! More vents!
Racing stripes tell the air where to go, for faster acceleration, and higher top speed! Each stripe = 3hp.
More vents = more cooling = more efficient = more fast. More vents also means more holes, making the car lighter!
Been really into these series now, having 2 Subarus myself and did exact same jobs you did byself without any experience was a 'cancer', but gained loads experience . Funny enough I had exact same exhaust blow lol. Keep the great work, this is true enthusiast stuff!
Bigger turbo and intercooler imo and Go more hard-core with the weight saving
Dumping a bunch of dry ice on the sound deadening material on the floor will help break it up, hammer it to small bits before dumping it directly on the material and it will make chiseling it off much easier.
Richard is the man! Put so much effort. Should probably have gone for modifying a swift sport vs a standard subaru or something like that.
I was wondering about that exhaust! I paid $1500 for mine on the e30, I thought, how on earth, $380??? Riiiiiiiiiight, it's crap.
I have been waiting for this video for soooooo long!!! This series is great!
This series is where it’s at!, keep it regular!
Yesss, the Subaru is back!
Now you can say blood, sweat and tears went into this build
Front splitter, rear diffuser, flat underbody (you should be able to make all of these with angle grinder and sheet of abs/aluminium)
My love for the Subaru will never die the rumbles from the exhaust and whistles from the turbo are unmatched
Anybody still remember how the car still had to be "practical"? I wonder how fast the Subaru would still be with your moving stuff in the back of the "van:?
Smh they back peddled us.
Supercar also is unpractical
The only rule they had was that it had to be MORE practical than a supercar. Which it immediately is just by having big boot space.
Ребята, вы не представляете как я ждал новую серию. Для понимания, я загружаю эту серию с ужасным интернетом уже 15 минут и смотрю при помощи переводчика, но это всё ровно стоит того! С нетерпением жду новый выпуск!
Nice! I was wondering about this build for a month or two, I’m glad you three are still making progress.
Duncan just has the type of face that says you can trust me that I will have this car make power. Love it. Perfect length on the vids lads keep it up!
Yay! Happy to see subie again!
Thats a very happy dyno to hit 300whp on a stock TD04. A VF34 maxes out at around 300hp
Great job. The juxtaposition of the downs of spannering to the highs of spinning it up on the road says everything about why folks even bother in the 1st place.
Well done lads
Yes I’ve been waiting for this for ages. One of the best UA-cam series I’ve found, so glad I found your channel!
Man I started wondering if I would see this episode before doomsday
For future reference, to get the up pipe out, I unbolted my headers, and I took out the bolts that mounts the motor to the subframe, then jacked up the motor, should just slip out if you do it right. No need to unbolt the turbo
Stock turbo definitely stretched at 300. Duncan mapped my classic afew yrs back. Very good
Loving this series. Hope to see more budget car modding like this in future.
Well you found out the key to Subaru...
Working on them with turn you into a bloody unicorn 🦄 hahah quite the bump there mate but welcome to the subi life haha
I spent more then 2k on my car so far in just performance parts. GDI 2.0t on e50 with aux fueling. Has 2 extra 42lbs injectors on throttle body that only spray under whatever throttle position I have them set up at. Helps keep my valves clean also.
Spark Plugs: I'm reading that more expensive plugs are not higher performance, only longer lasting. The cheaper copper plug, or most expensive gold, are the best conducting and highest performance.
Richard is such a lad, helping with all your projects.
I've been really enjoying this series. Looking forward to seeing the final results.
Awesome, definitely one of my favorite car related UA-cam series I’ve seen in a while. Keep it up!
15:46 I actually called it. I was like it’s gonna be an exhaust leak. I also saw the smoke and was like that’s a lot more than normal 😂
are you sure that first dyno was done properly(100hp, 50% gain just with injectors, exhaust , remap and filter?!)
Put the vf48 turbo and the sti intercooler very cost efficient and works really good for track and then use the other bit of money for a 4:44 diff with the 5 speed transmission
Guys, i need you every week on UA-cam with this wonderfull serie about the Impreza
The weight reduction gave you a pound.
You found it in the car.
without beefed up Engine Parts, that Boxer will blow up
it should be fine they will only run it for a few laps on a small track, but yea long term surely
Vent mounts are great, unless you need the heating on, you know heating up your phone while charging it …
I have been subbed since the first episode of this series and wow! It really shows how you don’t need much to make performance.
I’d also like to add a ❤ for Duncan!
This whole series is like a wierd "mirror" of everything Ive done/plan to do with my black 5spd, 05 Saab 92x aero "Saabaru".. (wrx wagon). It already has a Cobb "stg 2" turbo-back exhaust & Access port tune. But I plan to set it up for AutoX/track driving as well. And just like them, my factory clutch is almost dead at 180k miles lol, I'm going to get the exact same BC coilovers, vinyl wrap it black, get new rims & tires, big brakes, upgraded cooling/oiling, possibly strip out some of the interior & extra sound-deadening (but not everything like them), and I also have an exhaust leak. There's several other things that are weirdly identical to them from earlier videos.. I can't remember all of it though. But awesome series getting to see this done on the same car as mine.. helps me decide what to buy🤘
20+min Subaru vid, get the popcorn out
Loving the series! You are the new and improved top gear, but better in my humble opinion. Only wish I have is these were posted more often
13:15 "Congratulations you've had a c*nt" absolutely killed me
Would be interesting to know how much more easily an expensive exhaust would fit and how much you'd save on man hours getting it in.
I'd much rather shell out double to avoid the hell they went through.
Swabbed 800€ exhaust into Legacy R and it took ~60 minutes with smoke breaks. It would have been faster if I had used a lift like they did in video.
Research into aftermarket parts you are going to install pays back massively, both in time and reduced headaches
I'd have probably gone with adding the bigger turbocharger per recommendation. That and possibly an upgraded drive shaft. Though, that's primarily because I get worried about throwing a rod due to excessive RPMs. 🤣💯
Would be great to see this challenge done with more cars, the more unusual (or unsuitable) the better.
304!! Well done fellas! That has to be worth the injuries?
Little tip for next time... If you undid the engine mount nuts under the engine cradle, you would've been able to jack the engine up an inch on the offside to be able to get the turbo up-pipe out from underneath without needing to remove the turbo
Duncan’s got that Keichi Tsuchiya levels of legendary presence about himself!
Awesome, my favourite episode so far. I kinda hope that you don't QUITE beat the Lambo, so big turbo and intercooler gets done. It's actually turning into quite a car!
Hmmm... Something seems off with that power number. I've never seen a wrx with the OEM td04l make over like 250whp. That Dyno must either read very high, or there's some corrections going on. You're lucky to make that power on an ej205 with a vf39 from an sti.
Just a thought but would an E85 tune be a cheap-ish way to increase power even more? I honestly don't know how expensive it is or if it's even possible with your Subaru but maybe it's something to look into. Also I'd bet you could dial the suspension in even more than it already is. Anyway I really like this series and very much enjoy the chemistry between the three of you (and shoutout to Richard too lol). Thanks guys!
I almost wonder if it will be something accessible with the turbo and front mount. But it is meant to be practical, maybe E85 would make it unpractical given the access to the fuel itself
They're in the UK which means you cannot get e85 at a petrol station. Also if they did they would probably need to go for a flex fuel setup to ensure they weren't just limited to e85 alone. There are more cost affective methods of making power when you consider these things.
Best series on YT RN...Just wish the episodes were longer.
Genuinely one of my favourite series done on UA-cam, love a scooby 👍🏽
You guys like watching Donut Media too, eh?
On my previous Acura the fuel injectors were a 30 minute job lol.
Honda💪
Those green brackets of death REALLY suck. I managed to pull an injector wire loose in the process and never could track down the problem myself.
Best serie on youtube right now!
Love this series, thank you
The wrench knock-out gave me a good chuckle, thanks! 😂
"Give me oil in my subaru, keep me burning" gave me severe church kid flashbacks.
Is that a Lotus Europa in the back of the garage?Favourite episode of the series so far.
Yes it is
Guys you been brilliant... even have the bell on I can't wait for the next episode
The yellow devil looking powerful
Should have gone with JapSpeed exhaust, full system for under £1000, unequal headers, up pipe, down pipe (with either decat or 200 cell high flow cat) and cat back, it all fits too 🤣🤣🤣
MORE! I love this series :)
The editing makes it look like Will was initially slacking off and then gently coaxed into wrenching with a box of donuts next to the car lol
I look forward to this series so much
Bigger turbo will just easily break the ej205, because u are already at the top of its perfomance i think. ~380 engine hp is a max power for it unless you limit the torque up to 5000+ engine speed.. But u deffinitely need bigger top mount cooler or front mounted one for more stable perfomance.
Cool series btw! Have the same engine with tiny ihi vf30 turbo and 1300kgs weight. Goes 0-100kmh in 3,8-3,9 sec.
Surprised you didn’t do a vf series STi turbo (not sure if yours comes with the td04 or not, in the USA it does) but we can find STi vf series in the USA used for 500-600 bucks, which would be a huge update.
Anyway. Love this series
Maybe a flat bottom would help the air flow
Literally putting their lives on the line in the name of performance, made me subscribe.
LETS GOOOOO IVE BEEN WAITING FOR THIS EPISODE FOR TWO MONTHS
when is the next one gonna come out-i cant stop watching this its so good
Such a sick series please keep making more of these
Perfect video length, really enjoyed it. Something is wrong with the sound, but I really love those videos
That little oil hose at the bottom of the turbo is a right PITA to get connected and clipped on properly. One of those jobs that needs miniscule hands and tools that haven't been invented yet.
Surrey Rolling Roads are great, know their stuff too.
Gave them a list of my nods and they were pretty much spot on with their guess.