Graff Diamond Metal Cutter, are they better than an abrasive cut off wheel? A better Cut Off Disc!
Вставка
- Опубліковано 5 жов 2024
- amzn.to/2W7pUXx - Diamond Metal Cutter GRAFF Black 4 1/2-Inch, Professional Angle Grinder Cutting Wheel
BREAKTHROUGH IN METAL WORKING!
SHEET METAL CUTTER GRAFF BLACK 4.5 inch
Diamond grinding wheel for metal GRAFF Black will definitely save your budget because it has a number of undeniable advantages: a long service life (up to 3000 cuts), high quality of the blade material as well as a thin cut, no smell while working and a small amount of sparks.
Professional grinding wheel GRAFF Black is specially created for dry cutting of metal, rebar, iron, metal profiles, aluminum, pipes and other sheet metal.
! ! ! DISCOUNTS ! ! !
Gas prices are high and I've been using the app Upside to save. You get cashback when refueling at selected gas stations and even some restaurants. Use promo code X9C5H to get an extra 15¢/gal bonus the first time you buy gas and use the app. upside.app.lin...
I think k the big difference in any blade vs grinder disk is that the grinder wheel temperature is much higher. The graff wheel will cut while the other will grind.
Nice.
Thx to u n graff, i bought one. Really impressed. I wont b goin back to the others anytime soon.
even if it didnt cut too well it's a must. Common grinding discs create airborne fiberglass particles. I used it once at home and had a panic cleanup afterwards. The amount of black mess on the ground was ridiculous. It's pretty much like asbestos plus the burned resin
Modern people are snowflakes.
I stripped the diamond off the Lennox disc in like 20 minutes use . Disc was brand new. Don't know what happened maybe faulty shit glue
If you want to cut fast buy a plasma cutter!
These discs has a lot of advantages, a lot less dust is a great thing, and so is the fact that they don't decrease in diameter.
Nice disc! Great review! =D
Great review. Looks like a good disk. Mahalo for sharing! : )
Huh, those are interesting. I wonder how these would do on aluminum.
I had a pretty hard time getting the standard cut off wheels to go through it, just gummed everything up, so I picked up a aluminum specific wheel (It was pretty expensive, about $4 which is double what I pay for the "heavy duty" Dewalt ones I usually run for steel). It works much much better, but still not perfect. Be interested to see how these handle harder stuff too, like 60 hrc steel or something like titanium.
The aluminum is too soft for this disc, do not use it for this. Thank me later)
@@Noone-mb9ho
Late reply but true
Sold. What sucks is a vendor at work just handed me a $500 gift card to Home Depot to get a couple things I wanted for work - but this vid just made me spend $20 on amazon at 1am instead…. Ill use the card and get the other guys a Ridgid blade.. lol
Awesome channel thank you
I'm surprised as well with that performance! Also i'm wondering, does your Angle Grinder turn either way? Or did you use 2 different ones?
$18 for a cut off disc is steep. Id like to see if it truely holds up to the 3000 cuts they claim. Thats the only way it would come close to being feasible in my opinion
That's pretty much my thoughts! You can figure a 10 pack of "good" abrasive discs cost between 10 and 15 bucks, so this disc needs to last 12x longer to get your money back. That being said, I buy 10 packs at harbor freight for 7 bucks! I was more shocked how well it cut because the Lenox disc bounced around and cut painfully slow.
@@1D10CRACY I think this is one I'd hold onto for special uses. If I needed to keep from runining the heat treat, maybe hardened steel, etc.. I've had to go back and cut the tips off of already heat treated blades in the past for reprofiling, and it is a bit of a pain with the standard wheels. You have to go super super slow and dunk it into water after about 2 seconds of contact with the wheel.
I search for this 😍
Please update Graff cutting wheel performance 1 year later. Still as good?
They seem ok to me! I'm still using them!
have you tried a hand hacksaw very quick thro a bar
Have you tried one of the Evolution saws? They are a bit quicker than a hand hacksaw. ua-cam.com/video/xMc0oHx4Pgk/v-deo.html
Why didn't you use the Linux disc against the graff disc?!
Mainly because I don't like the Linux disc. I cut a lot of metal and the Linux disc is a fail, for me. I'm sure others like it, I don't. :)
In commercial or factory settings OSHA requires eye protection and also face protection in the form of a grinding/cutting face shield.
Yea OSHA sucks!