More problems prepping the bottom of the Mach 1. I solve problems.
Вставка
- Опубліковано 3 жов 2024
- Hey Gang, I'm making more progress on the Mach 1 Cobra Jet. Detroit speed mini tub issues and more work on the bottom of the Mach 1. I wanted to address some of the welds, and grind down excess material. Turns out there's still a lot to do. I did not get any sealer on the car yet, but I'm working on it. I also received a batch of parts for the car. Good things are coming.
Please LIKE and SUBSCRIBE!
/ jo_daddy
www.amazon.com...
/ jodaddysgarage
/ jodaddysgarage-1000446...
www.teespring....
www.streamlabs...
If you are interested in purchasing a welder like this, here are some links:
www.arccaptain...
discount code: JODADDYSGARAGE save 5
Sanding discs: amzn.to/3QypbKu
Hole punch: amzn.to/47qDPJX
(Not the exact same one, but very similar)
As an Amazon associate, I earn from qualifying purchases.
Evolution power tools discount: aspireiq.go2clo...
Promo code JODADDYPROMO (save5%)
Other channel: / @jodaddysworkshop786
Mustang Restoration, 1965 Mustang Restoration, Mustang Sheet Metal, Mustang Bodywork, Classic Mustang Restoration, Classic Mustang Sheet Metal, MIG Welding, Spot Welding, dynacorn, paint and body, panel beating, how to, cool mustang,
#mustang #sheetmetal #restoration #howto #carjig #cartalk #mach1 #dynacorn #bodywork
#detroit speed #minitubs
![1970 Dodge Charger sat for 20 years... Will It Run? feat. @DylanMcCoolVideo [EP1]](/img/n.gif)
Pump and what about balljoints ?? Also got a story about those side panels to the rear seat. In 1969 when my dad purchased his mach 1 , I would have been 4 years old little brat. I remember sitting on top of those box panel instead of the rear seat, reason been that I was too small to see outside the car. I would sit sideways holding to my dads front seat like a passenger on a motor bike. He never complained to me. That would have driven me crazy if my kid did that to me. He owned that car between 1969 and late 1971 in exange for a 1972 Ford Econoline. My mother cried when he sold that car. Good memories !!
Ball joints are already in the control arms.
This is why I don’t consider the days work done until I grind EVERYTHING. On panel or small project at a time. It get deburred and welds ground. I run my bare hand on everything that I work on and make sure it won’t snag me next time I touch or run into it.
No need to rush, patience is a virtue. Fantastic Barry, c-ya Mon nite.T/B 😊
Progress was made.
Important progress
Them Detroit mini tubs are a pain in the butt
Love watching your attention to detail and the excellent results.
Great job Barry, that is a lot of prep work! Hats off to you!
hi barry looking grate . a lot ov work .well dun .👍👍👍👍👍👍👍👍👍👍👍👍👍😄
As always, digging the videos and progress.
I liked using the red sanding brushes from Harbor Freight for tight areas. They also worked great for removing the sealant around the windshield.
Your work shows your craftsmanship and you always take the extra step to do things the right way
Looking great well done
Great work, love the vids, you mention someone taking over the build, I was hoping to see you build the car to completion ..hoping I got it wrong.
I was initially asked to just do the sheet metal work. I will probably be painting it. I do not plan to assemble everything.
Nice work and attention to detail.
Right is always better than "right now".😁
The top wheelhouse brackets are only there to support latches for foldown seat option.
Good job do what you have to do to make it right.
Ups from cal delivery my new door it looking very nice tell got to bottom corner it was bent 80% i taken my sheet metal folder and itvwill fill
like christmas morning. Loved when parts arrived. I agree that it looks like the mini tubs are pushing the side trim into the seats and you can just trim the panels . Plus I cannot believe there are SO many little pieces just for the rear seats . really coming together, hopefully she will soon be ready for the next step in its life
The brackets on the top wheelhouse are for the fold down seat, but I think you still need them for the non- folding seat. That is what the seat back attaches to….I think. If that’s the case, I hope the mini tubs haven’t changed the attaching points. Maybe install the rear seat back and see if it will attach to those brackets. Sorry if things like this keep you up at night!! Great work and entertaining!
I installed Borgeson power steering kit on my 67 Mercury Cougar. Definitely an upgrade from the Bendix power steering system.
Great work 👍
Don’t rush it will bite you down the road!
Great video Barry. Do you have the fold down rear seat that you can test the bracket's location with? Also don't forget that the rear interior panels are flush with the windlace that goes along that area and adds probably 1/4 inch at least that was on my 1965 and 1966 Mustang Fastback.
So many little items to confuse and take up time but all part of the project. Lucky you have your car for reference. Looking good but take care of the back.
I recently subscribed to you ehe cant wait to learn even more
Keep up the great work, I know the prep work seems to never end. What do you think about the upper and lower control arms? Are the silver ends paint or cleared over bare metal? Just curious. Thanks
They appear to be painted. Seem nice.
These pinched holes in both boxes means the have been 'probed' . Investigated..! For contraband etc..!
😂
His back says he could use some!! :o
Brutal getting that weld primer off. Thoughts on painting to the trans crossmeber. Easy tape off point
I’ll look at that. Thanks
Hey Barry. Wouldn't a product like acetone, lacquer thinner or even wax and grease remover work well with wiping off the remaining weld through primer and still leave a contaminated free, bare metal surface for painting?
It won't. Not aggressive enough.
*Why not **_"color sand and buff"_** ....the floorpan?*
You can if you want.
@@JoDaddysGarage *Don't laugh I've buffed a many 68-82 Corvette door jambs ...*
Are the mini tubs 2" or 3" ?
Thank you
Michael
It was about 2.5”