Jansno X50 - A Budget Ebike with a Different Style - Live Bike Build
Вставка
- Опубліковано 16 лис 2024
- Buy A Jansno X50 Here: www.jansno.com
Buy A Conversion Kit: amzn.to/43SUJPW
Thanks for watching:
I hope you enjoyed this and will come back for more.
Become a Member and Help Out My Channel: / @runbikemike
Follow Me @: www.RunBikeMike...
Swag: www.teespring....
My Video Gear: runbikemike.wo...
Popular Playlists:
Mountian Biking Playlist: tinyurl.com/4r...
Walnut Springs Playlist: tinyurl.com/yb...
All links are Amazon Affiliated Link or Insta360 Affiliated. No extra charge for you but by using them you help out the channel.
I bought one just like that the x50 on Amazon today they had two left I'm excited to get it
🤙🏻
I just bought one my came with the same box but it has a 14Ah battery, aluminum alloy Meg wheels for 669.00$ plus 100.00$ shipping. I'm happy with it only 10 miles on it ,I'm 63YRS young and 5'.3 man my mountain ebike 26"x 4.0 ,alittle tall to my liking. My victrip janus is good for me,my grocery bike,GREAT JOB ON YOUR VIDEO, GOD BLESS BROTHER AL YAKIMA WA
What's your top speed that you get on your jansno x50?
I've never built a bike of any kind before... I'm having difficulty following the official guide's first step (front wheel.) Can you explain how exactly to line it up? I know what I'm supposed to do, but I can't seem to slide the wheel in far enough to be able to wedge the metal rod in.
There's also a coiled up thing that looks like some sort of light at the end, as well as... the top half of a manual pump? The guide doesn't show where that goes at all. Everything else though, I've already done, including the seat. For me, that was the easiest part. (I have small hands, but I used my PC building knowledge of putting the screws in criss-cross order, not both front, and both back.) They only included 2 out of 4 screws for the handlebar mount though.
So for the front wheel. Loosen up the quick release bolt as much as you can. There should be a spring on each side. Slide the wheel on but be careful when sliding the disc in to the brake caliper. Once that is lined up you should see the wheel seat down fully in the drop outs. This is easier upside down. If you flip the bike be mindful of the computer and shift. Once the wheel is fully on you can start to tighten down the quick release. When you clamp down the lever it should be hand tight only. Then once that is done spin the wheel to make sure it spins freely. You might get some disc run and that is somewhat normal.
Can i get a bigger battery for this and which volts and amps
I assembled mine today won't power up
Can you plz do a ride test sometime in a day or so I have one coming in the a few days
I will have a full review coming out very soon. It is a fun bike for sure.
@@RunBikeMike I’m about 240-250 in weight you think I’ll be fine
Should be just fine on this bike at that weight
@@RunBikeMike I also got one ordered today! Looking forward to the review :)
@@Mickesixx sweet!! I just put some rear foot pegs on mine. I have been ripping around on my trails with it. So much fun. I hope like it too
How do you set to Mph?
how is high this bike please
The bike can go into the 48 miles per hour if you unlock the real speed and if you do it’s under the seat. But sadly I’m getting the bike and it’s illegal for e bikes to over 28 mph where I live.
I can only hit 32 with it unlocked. How are you getting 48? I would love to get even more speed out of it.
I just got the bike, and never built a bike before.
A few things I am noticing - The official guide is very bad - My disc brake on the front wheel, is "cramped" to one side always against the "right wall" of the small gap it is supposed to stay clear off. The saddle mount is awfull, the bolts are almost impossible to tighten.
To fix the brake issue. Loosen up the two bolts on the caliper. Then squeeze and hold the brake handle while retightening the caliper bolts. This will center the brakes properly.
@@RunBikeMike I asked Jansno, and they send me a video - showing one screw to unscrew, but there were two screws to unscrew, now it's fixed. :)
Nice commentary but we can’t see a thing
skip the BS go to 5:15
Dang bro just dang