ToolkitRC M7 Charger
Вставка
- Опубліковано 23 лип 2024
- Thanks to ToolkitRC for sending me this M7 LiPo Balance Charger for review although I really think calling it a charger at this point is a serious understatement. ToolkitRC is redefining what we should expect out of our equipment because for a fraction of the cost of "standard" chargers, you get more power and more tools.
Watch the video to see what I mean.
00:00 Intro
00:41 Power Test
03:11 Accuracy Test
03:52 Regen Discharge
06:31 Weights and Measures
06:52 Connections and Controls
07:30 System Settings
10:35 Multifunction Testing and Demonstration
18:31 Wrap-Up
REFERENCE LINKS
► Learn more about the M7 www.toolkitrc.com/m7
► RCVR P200 Review • ToolkitRC P200 GaN CC/...
PRODUCT LINKS
► ToolkitRC M7 Charger www.banggood.com/custlink/vKG...
► ToolkitRC P200 GAN Power Supply www.banggood.com/custlink/vvK...
► Radiomaster TX16s www.banggood.com/custlink/Kvm...
► Radiomaster Max Edition www.banggood.com/custlink/D3D...
► Radiomaster CNC Parts www.banggood.com/custlink/GKD...
► Radiomaster Leather Side Grips www.banggood.com/custlink/mvG...
► Radiomaster Faceplates www.banggood.com/custlink/KmG...
MY FIELD CAMERA
► GOPRO HERO 9 Black US www.pntra.com/t/SUNISk1LSElDS...
► GOPRO HERO 9 Black CA www.pntrac.com/t/TUJGR0pHR0JH...
► GOPRO HERO 9 Black UK www.pjtra.com/t/TUJGR0pGTUJHS...
► GOPRO HERO 9 Black AUS www.pntra.com/t/SENKTExKSk1DS...
RCVR CHANNEL LINKS
► Support the work I do here on Patreon: / rcvideoreviews
► RC Video Reviews Website: rcvideoreviews.com
► Discord - Hang out with the RCVR Crew: / discord
► RC Pilot T-Shirts! teespring.com/stores/rcvideor...
AFFILIATE LINKS
► Amazon Affiliate: amzn.to/3lEz5ZL
► Banggood Affiliate: www.banggood.com/custlink/3DD...
#RCVideoReviews #toolkitrc #m7 #charger - Наука та технологія
![☀ Новые технологии: нитрид галлия. Миниатюрно, но мощно. [ToolkitRC M7 & P200 | GaN]](http://i.ytimg.com/vi/J4KifJ1wwjY/mqdefault.jpg)
Here it is!
Your first first...Pinned!
@@RCVideoReviews yep😁...love what you're doing on your videos! Found them when I was looking for guidance on my Radiomaster(Open TX first timer). You've been a big help. Thank you!
@@durkkooistra4797 Appreciate the comment. Thank you.
I'm not sure if you know this but this is the only video on UA-cam (probably on the internet too) that shows what you're plugging into the input port. I'm new to the hobby and I've been searching for days (literally) for a tutorial on how to storage charge! Every video I've watched shows a close up of the screen of the device they're using without actually explaining to the viewers what to plug and where to plug. You explained the whole cycle. Thank you very much!!
You're welcome. Glad you got the help you needed.
great review and functionality test!
Thank you.
Great product review, thanks!
You're welcome. Thanks for the comment.
Yes, please make a video on the calibration process too
Got it. Thanks for the note.
Great review, i just bought it.
Hope you enjoy it!
Great review! Would you rather have this one or the ISDT Q6 Nano, (let's say they are the same price..)?
I am running 2.0.1, power supply output option is missing, any thoughts?
Great piece of kit.
I'm amazed at the tech they stuff into this little box.
Can I use this to charge 2x 2500mah Duracell nimh batteries?
What charging current and nixx peak I need to set?
Thanks for the review! Is it true that the is limited to 10S = 20V @PB ?
First and foremost, phenomenal video with great attention to detail. I have 3 questions.
1. How efficient is the “recharging function”?
2. How does continuous mode work?
3. What is the point of pairing this with the ToolKitRC P200 Power Supply?
1. Not sure. I haven't tested.
2. Continuous mode will start charging the next battery with the same profile as the previous battery with nothing but a battery change.
3. The M7 is a DC charger. You either power it with a battery or some other DC source like the P200.
Nice video. I may have to build me just a charger bench for all this equipment. I need more room in my shop.
I would think of the M7 more as a device to keep in/near your toolbox for builds. My M8S is like that, but I think after using the M7 for a while I may switch them around and use the M8S on the desk and the M7 in the toolbox.
Hi. Can you adjust the output voltage / amperage while the output is on? Or do you have to switch the output off to change the setting? Thanks!
No, the M7 like the M8S requires output to be stopped in order to change voltage/amperage.
Why IR does not show during charge. Did it give you a result after the battery was charged?
The regen function is a cool feature, I can't remember how many times I ended up with full charge batteries after a day of flying. Only downside I see is that it doesn't balance the battery that is being charged.
No it doesn't. That said I don't think any regen chargers balance the source. That might be a good product upgrade because they don't check balance under load either which wouldn't be a terrible idea.
Hi, I bought one a couple of weeks ago but the power supply option is not working. instead of showing me the info the manual says it should, it shows me a blank screen. i believe it is related to the firmware version 2.01 that i updated as soon as i got it. would anyone that has it mind sendimg me the firmware file so i can try downgrading back to v2.00 and see if i can use the power supply option again? thanks
Can you measure the battery IR, voltage etc powered by itself? (only connecting the output xt60 port?)
Not sure, I've never tried.
I have this, but not able to charge 1s lipos. 2s and above worked fine. When I try connect 1s and charge I get error balancer port cell error.
I tried set cell count to auto as well 1s. Nothing helped. V2.00. Any thoughts?
It’s not a 1s charger. The product description specifically states 2-6s.
“ToolKitRC M7 200W 10A 2-6S DC Smart Charger & Diagnostic Tool”
@@RCVideoReviews I took v2.01 update and now I can charge 1s lipo as normal.
Is there a charger that will allow you to change only one cell in a pack?
How to charge 1s lipo?
Should I remove when says fast charge done or wait until totally done?
Fast charge done just indicates a change from constant current to constant voltage so yeah leave it until it says it’s done.
ordered mine M7, would be grat to see how to calibrate it :)
Ok, it's not hard. I can do that.
Top review 👍👀🇭🇷
Appreciate that. Thank you.
I think the value of this charger for someone, that has very few models is massive. If you have 10+ models and electronics fail or missbehave, you can swap parts for diagnosis. With few models, you're guessing and buying replacement blind.
It's so great, I think everyone should have THIS model, and some dual or quadruple as addition if needed. It sucks toolkitrc multi battery chargers do not have M7's features.
My plan is to buy used or as new small AC bricks, that charge through balance port, with 1-2A output, to charge multiple at once, and potentially finish with M7, or storage charge with M7 after brief multi charge with all chargers. Those bricks are so cheap and provide redundancy, while I won't use more than 3s. If a channel fails on a two or quadruple charger, you're stuck with it-shucks to bin, sucks to loose channel, hard to sell half failed charger.
One thing no one mentions, is despite the great value in functionality, this charger requires BIG additional investment, especially for users, that don't solder.
All the necessary and useful extensions it needs, while providing none, will be very costly. That is something, many happy buyers will be disappointed about.
Nice video....
Thanks
Question on the recycle function... What's the advantage of doing it this way vs. just swapping the input/output?
The regen discharge focuses on the state of the battery on the output side. i.e. It changes it's state from current to discharged or storage based on parameters in the profile. i.e. If I set profile to storage @ 3.8v/c, the regen discharge takes the flight pack(s) down to 3.8v/c. If you flip the batteries and charge you can run into two issues:
1) The source voltage might be too low for the voltage regulator to upscale to match the output voltage. i.e. It can make chargers give up if they have to feed a high voltage/high amperage output battery with a low voltage/high amperage input battery.
2) There is no way to govern the correct stop point for the input battery (other than to use input profile settings which has its limits), this is the one you're trying to get into a desired state of 3.8v/c. The profile will simply charge the output battery to the configured state of 4.2v/c. If your output battery is the big one, that will kill the input battery.
The whole point of all of this is which pack is the focus of the desired outcome. If we want the flight pack reduced to storage, the desired outcome is 3.8v/c therefore, it goes on the output side in regen storage which can be configured to reach 3.8v/c.
Any more simple questions???? ;)
@@RCVideoReviews I think you covered it 😅
@@FL_Engineer It was an excellent question. My knee-jerk reaction was "hmmm....good question."
@@RCVideoReviews Excellent review as always! Keep the good work. I was wondering the same thing and I have an answer now. Just one more thing - do you possibly know what would happen if the battery on the input side gets fully charged? I hope the charger will stop on time.
Hi John. looking at the M7 and using your link. Is there something special I need to do when I do the purchase, (Preorder) so I know you get the affiliate. Also is there a way in discord to send you a private message. Looking at some other items I wanted to chat about?
You can PM me on Discord. Just use this link and I'll get the referral: www.banggood.com/custlink/vKGEoDS8o5
John I didn't see a balance port for when you are pushing the power back to the input battery. is this not a concern? I am sure it wouldn't be used very often but I think it should be there. Now I am new to Elec. planes, came from glow so no expert here or even close. But very cool charger.
There is no balance port on the input side. For regen discharging you really don’t want to be pushing the source to anywhere near its peak as there is no monitoring on that side.
I think the better way would be to plug batteries you want to discharge to the input and set cut off voltage to the desire sweet spot 3.8V * number of cells. Two bird with one stone. Discharging packs to storage and not possibly overcharging the "source" battery.
How can i do balancing? I can find charge, discharge and storage only. Thanks
It balances during charge cycles.
@@RCVideoReviews thanks. Can you tell me if there is a trick to charge only via balancing port? Because my 1s Lipo has only this connection. Thanks
charging from one Lipo to 2 Lipos ?
I dig by M6, but changing the min input voltage etc. settings to go from power supply to battery input and back was a bit of a pain, the menus/interface and scroll wheel on this one are big improvements.
I've never tried the membrane device, but I can say the scroll wheel navigation is becoming 2nd nature to me. It's showing up on so many different devices.
@@RCVideoReviews The old one is not even membrane, it's capacitive (but only on the buttons)! Works pretty well especially for a cheap unit, unless you're trying to fumble it with your fat fingers in low light lol. I prefer the scroll wheel to either any day, especially in long menus with many selections. I was going to buy a second to build in to a dual charging case, but now I might need an M7 as well lol.
@@maceliusfpv370 I think this M7 might make its way into my field box to replace my UP600s (which have been excellent by the way) but the M7's have more gadgetry.
What if I have it on continuous and unplug mid-charging and reconnect. Will it just start charging again?
Yes
@@RCVideoReviews Thanks for the fast answer :)
@@RCVideoReviews Oh and one more question: Can I charge a 6S LiPo (25,2V) with only 19,5V DC Input? Does it have a step-up or smth? I didn´t find any info in the manual.
Will this charge a lithium ion battery that doesn't have a balance lead?
Not using a Lithium profile. It will complain about lack of balance info if charging with a lithium profile and no balance connection.
Can I plug this into the wall? House electrics? Just order this charger but think I need a 240v (UK) to 12v adapter? To work this xharger. I have 2S 3000mah & 3S 2200mah batteries for my RC Car. But im completely new to this hobby 😮 thanks!
This is a DC charger meaning you need some kind of power supply like this: amzn.to/3QoWMW4
@@RCVideoReviews thank you 😊 🙏
Is there a trick to charge only via balancing port? I have a 1s lipo with just a connector fitting the balancing port. But it says voltage to low. Thanks sir
Get an Ultra Power UP-S6 charger for 1s cells.
Hi, i believe the new firmware 2.01 fixes exactly that issue. the problem is that the powersupply function stops working. you can download the new firmware file from the official web page. if you do upgrade, please make a backup file of the original firmware file (just copy and pase it on your drive) and share it with me please. i don't use 1s batteries but i do need the power supply function so i would lie to go back to v2.00 but can'tfind the file. thanks
@ Nice, thanks for the information. I will reply again with a download link for you on saturday or sunday.
@@reajtime thank you!
@ i have connected it via usb but there is no file on it to copy?
Unfortunately, the device doesn't entirely convince me with regards to the built-in servo tester. I have discovered that digital servos cannot be controlled because they constantly flutter. If I want to test the servos of 2 retractable landing gear, which are usually connected via a Y cable, that doesn't work either, only 1 servo moves at a time .
Otherwise a good device and also a good test.
😸
Thanks for watching Richard.
i had one... i managed to burn it.. (shit extender coord i reused without paying attention to the reversed polarity... it should have protect diode ..) exept that its a nice charger ..; (so i took the m6d who was promo double charge more usefull than servo analyzer (i dont use the servo testing plug anyway drone dont have servo ^^ )
if someone know how to repair a reverse polarity damage on that thing (but i bet its death .. i dont see where it burned on the board but the entrance plug is death when powered battery side u plug the mainlead and it say overcurrent ...
Got mine from AliExpress and it has 2.0 firmware out of the box. Hope it is not a new revision which is cheaper and worse, as usual :)
The latest firmware fixes a few things. I found the issues and worked with them on the fix. Mine work well.
@@RCVideoReviews also 2.0? Maybe you know why it is not published on the website?
Don't know the answer to that one. Not sure what rev #.
@@RCVideoReviews Actually, I found 2.01 version on the website with the note "Only for V2.xx main board". So it means there is two hardware versions of M7. Curious what might be a difference...
@@alexey_sychev I was wondering the same. And how can I find out which one I have?
Oh man beat by 5
Slacker
@@RCVideoReviews 🤣🤣🤣
Freddie gets first when these videos render/post at 3am. I have this vision of an electroshock collar activating when an RCVR video posts. I SWEAR I've seen a few of his "firsts" before the video even posts. He's just dedicated.
@@RCVideoReviews it’s usually when I’ve been drinking earlier and wake up dying for a drink of water. 😂
@@FASTFREDDIE-R.C. hahaha..and brutally honest.
I Just bought this charger and i think i found a bug in it . If you leave a battery in charge and the current is cut . The battery will be discharged by the mc7 ...... kind of annoying