I am currently away from Kuala Lumpur, making a short one-week trip home to Kuching to visit my mum. Also, I honestly need some time away from the city and considering all the drama that's happened this year, I do need a short break myself. Since I am away from my workstation and do plan to take time off for myself, I shall reply to comments and emails a little slower than usual. I will be back at full swing next week. Meanwhile, do follow me (stories updates) on Instagram @shutter.therapy as I will be updating my adventures, what I shoot, where I go, who I meet and what I eat during my time in Kuching, Borneo.
I am sooooooo glad that I stumbled across your YT channel. Your slow, precise speaking is a joy and enables the listener to digest exactly what you are saying. Nice! Stay healthy.
Omg! I thought it was something wrong with my lens cause I was like why it was so zoomed in! Turns out I had the digital tele-converter on the whole time! So glad I came across your video thanks again!
Here's one that is lens specific but can be resolved on some OM-D cameras. I had planned a trip to shoot a steam train. Got there early yesterday, found a good spot. Used my C3 preset for CAF+tracking and waited for the train to appear. It came around the corner and the camera would not focus and within 10 seconds the train was passing me. Afterwards, I noticed that I had inadvertently slid the manual focus ring back on the 12-40 Pro when removing it from my bag. I had been doing some close up work at home and enabled the focus ring in the MkII menu then forgot to turn it off again. Lesson is: either turn it off in the menu or remember to check the manual focus ring before you set up for a shoot. Great video as always, thanks Robin.
Hi Robin, I always appreciate your videos! I have asked you this before, but I didn't fully understand your previous replies. You often mention that the camera should always be turned off, to preserve battery life. I am certainly not arguing against the basic statement, that you should always try to preserve battery life, but I have mentioned previously that if you have the screen closed and set Quick Sleep mode to something low like perhaps 10s, then as soon as you put the camera away from your face, it will go to sleep. In sleep mode, there doesn't seem to be any noticeable drain in my experience. Waking from sleep is considerably faster than powering the camera on, you often refer to wanting the camera ready in order not to miss a shot, something I totally agree with! Sleep-wake is less than a second, I usually half-press the shutter as I raise the camera to my eyes, and it is ready when I get to aim it. Currently, I turn the camera on as I head out with it and only turn it off (if I remember to) once I stop using it. Even forgetting to turn it off does not seem to be much of an issue as long as you have also set an Auto Power Off timeout, I have set it to 4h to make sure it happens eventually, but not whilst using it. As in many cases, different approaches to achieve the same goal are sometimes mostly down to personal choice, so I am certainly not arguing against using the power button approach. If anything, it is meant to mention an alternate way to achieve the same result, that in my experience is more convenient, and actually saves more power, since it goes to sleep within seconds, between your shots even in the middle of using it. If you find the 10s sleep timeout too low, whilst actively using the camera, it can be raised to 1 min. However, your previous comments on this seemed to imply that sleep mode is just not a valid method to preserve power, thus more being wrong than another way to prolong battery life. But you never explained why. This has confused me a bit since in my experience it seems to do the job. I might have misread you, but to me, this part of your position doesn't seem to make sense. I might of course have misunderstood you, if you have the time, it would be interesting to learn about the drawbacks of sleep mode! Perhaps I should mention that the Quick Sleep is not available on all Olympus cameras, but I have used it on both EM5-II and EM1-II
Thank so much Robin! You understand beginners and common mistakes so well! I'm still learning how to navigate menus and my OM-D so I found this invaluable. You are an AWESOME teacher!
Very helpful video, and not just for beginners. I'll add another mistake: changing one or more settings for a specific shot, then forgetting to change them back for the next shot. Worse: forgetting to change them back before you turn the camera off when done. What's wrong with my camera? Guilty. That's one reason why I still shoot film from time to time. ISO fixed. Meter. Focus. Adjust aperture and/or shutter as needed. Shoot. Hard to mistakenly change a setting when there are so few settings to change. Cheers! And thanks for the video.
I guess most photographers would want the camera to remember the settings, so when they switch it off and on they don't have to readjust the same settings, if they are shooting for a long duration of time. But I understand your situation, perhaps camera manufacturers can give an option in the camera to "reset" the main settings each time the camera is powered off? Of you can use a Custom setting, assign it to one of the C modes on the mode dial, and just use that every time you power on your camera, it will default to the settings which you have already pre-set.
Hi Robin, I have just set up my camera to use the digital 2x teleconverter but I also made sure to use a SuperFine Jpg file to record the image. If I shoot both JPG and RAW and the shot itself has a reasonable amount of information I am finding that the JPG file is 8mb to 9mb whilst the RAW image is around 17mb. It is obviously not the same information being recorded as it's not the same image as the RAW image is shot further back and has different information recorded in its file. I have added the 2x to one button and the change for the file to another. I'm going to give this a go with my 40-150mm f2.8 PRO lens for surfing. I have the 1.4 TC which makes the lens f4 but needs to be stopped down to at least f5 for a sharp image. The 1.4TC will give me a focal length of 420mm in FF equiv but if i use the digital 2x TC I get an effect FF focal length of 600mm and can still use the lens at f2.8. As I only want this for surfers I'm going to give it a try and see how it goes.
A good video Robin. I just recently added an EM10 Mark IV to my kit (EM1 Mark ii and EM5 Mark iii). Your tips are always great for someone like me that subscribes to the KISS theory. Well done.
Good video clip Robin. Just one small comment about turning the camera off. If you shoot a series of burst shots with many frames then allow time for the processor to write to the card. I once turned mine off directly after a series of bird in flight shots and had an issue with getting camera to reboot even though I use good quality memory cards. Turned off for 5 minutes then restarted and gave camera time to reboot and return to my settings.
Hey I have not encountered that before, though I believe a glitch could have happened if the camera is switched off while still writing to the card. I'd think the camera is smart enough to wait before switching off, but I guess I need to investigate this further. Thanks for the feedback.
Discovered my dad has had the digital teleconverter function enabled on his gen one em5 for the last decade or so. Real facepalm moment for both of us. At least the raw copies were not cropped.
Hi Robin, very useful tips. Thank's a lot. Now that you have been using the M1 III for some time, you can tell us your impressions of the (versus) M1 II ? I'm sure that this issue is of interest to many Olympus users. Having the M1 II is it worth buying the M1 III ?
The biggest problem with beginners is they don't read the manuals they just go for the quick guide. You need to read the manuals 2. or 3 times so things start to stick in the brain.
And no camera manual I have ever seen is what I could consider "clear". For whatever camera you have, you need to read about some of the more snazzy features. It took me a few tries to figure out how to make good use of ProCap.
I would consider myself an advanced beginner/ early intermediate (have some rangefinder film experience too). These videos are fantastic as they give context that no manual will provide. Manuals give "how" to do something not "why".
Hi Robin , .... I have olympus EM1. I used 45mm-1,8 prime lens. I've followed your video about 10 mistakes. I set the camera with iso 200, app priority with f1.8. I tried to take a shoot handheld in the morning with bright sun , but I got the speed only 15 that was very risky to get blur image. What is your comment ?
Yes, that... I handed my Olympus to a friend, just to look at. When he handed it back, nothing worked. He swore he hadn't changed anything. Took me some time to figure out he had changed the function switch just by picking up the camera.
Robin. Hi. I have a question, if you don't mind. Do I have to set the focal length in IBIS every time I change a lens?? For example, I have my 14mm-42mm zoom on the camera, but the camera's IBIS shows a 9mm lens. Is this normal? Doesn't the lens tell the camera its focal length? If I do have to set the focal length, how do I account for my 14mm-150mm zoom lens I just got? Will IBIS work with Panasonic lenses too? Will IBIS work with manual lenses. Robin thanks for your patience. I am trying to learn about my EM-10 Mark IV but the doccumentation is scarce and not very good.
While it is always better to have a longer lens when needed, the 2x built-in digital converter can come in handy in a pinch. The outcome, of course, depends on available light, ISO and the resolving power of the lens currently on the camera, but I have used it fairly successfully when I had no other real options. Never say never.
1. Get a fast lens preferably a prime lens with an aperture faster than f/2.8. 2. Find a nice dark sky site with very limited light pollution, use dark sky map on google. 3. Check the weather and make sure there aren't serious clouds in the sky and that it is NOT a full moon. 4. Set up with a nice sturdy tripod, is a Manfrotto tripod with ball head. 5. Use the 500 rule to determine shutter speed for your chosen focal length don't forget 2x crop factor for MFT. 6. Set the aperture as wide as possible or maybe back one-stop if the lens suffers from aberrations. 7. Use the ISO to achieve proper exposure should be fine with around 1600-3200. Make sure the noise filter is off and you are shooting RAW. 8. Use a remote shutter release or the Ol.Share app to remotely fire the shutter. Consider using anti-shock to reduce shutter vibration. 9. Adjust shutter speed faster if the stars begin to trail. 10. If you cannot achieve the proper exposure without series noise then look into stacking or getting a star tracker. 11. Have fun
@@gaiusmarquez6344 not a problem. I might do my own video once covid is over regarding how I shoot astro photography using my EM-1 Mark 3 but for the moment I'm locked up at home and cant leave 5km of my house
Hi Robin, really nice video, definitely going to help me in operating the camera more efficiently. Could you please also give some tips on capturing under low light (apart from the usual tripod and bigger aperture)? The small sensor really struggles sometimes, how can I use the sensor optimally in low light conditions?
Hello Robin Thank you very much for your allways helpful videos. I recently bought an OMD M5 Mark 3 and have an issue that can not solve by myself. I made something wrong and can't use the touch screen to select the focus point but don't know hoy to fix it. Can you help me, please? Thanks.
There should be a button on the left on the LCD screen you can press. It cycles between "take picture when screen is pressed", "select area to focus on" and "turn off touch function".
Please help! Can you turn off the level gauge? This camera will not let me take a picture unless it is PERFECTLY level, which is ridiculous and makes taking any picture extremely difficult!
Fine. Disable WIFI mode!! I think I sent my second battery with my camera to the SAT XDDD. Tip#extra: if you don't want to mistake the image quality chosing medium or low ... You can leave in the scroll JUST RAW SF SF SF and RAW+JPG, that is , replacing the medium and low by SF and SF.
Robin, thanks for the helpful video. However, no doubt, unlike many of your viewers, I am new to the OMD system. The menus are complex , a comment that applies to most modern digital cameras. I find that, when as here, you are giving helpful tips, you are just going at a Formula 1 pace. I simply cannot take in your advice and get lost in your menu navigating. Yes, of course, I can repeat the video , but find the same problem? A short time ago, you recommended a book on composition. I do not recall which video it was! Would you be good enough to supply a link in your reply should you have the time. Many thanks.
I have used and owned more than 10 Olympus cameras for the past 10 years. The ON/OFF is switch never broke. I've not heard of anyone, and I've dealt and met hundreds if not thousands of Olympus users over the years.
Mistake No 1. Buying an Olympus camera. Too many useless and irritating 'features' causing unnecessary and irritating problems. That hideous menu system does not help either.
I am currently away from Kuala Lumpur, making a short one-week trip home to Kuching to visit my mum. Also, I honestly need some time away from the city and considering all the drama that's happened this year, I do need a short break myself. Since I am away from my workstation and do plan to take time off for myself, I shall reply to comments and emails a little slower than usual. I will be back at full swing next week.
Meanwhile, do follow me (stories updates) on Instagram @shutter.therapy as I will be updating my adventures, what I shoot, where I go, who I meet and what I eat during my time in Kuching, Borneo.
Robin Wong enjoy your well earned break.
Enjoy your break.
Enjoy your adventure...safe travels.
Have a great break!
Here’s wishing you a relaxing break especially with mum’s cooking 😀
Safe travels.
P.S. don’t forget your camera 😂
I am sooooooo glad that I stumbled across your YT channel. Your slow, precise speaking is a joy and enables the listener to digest exactly what you are saying. Nice! Stay healthy.
Omg! I thought it was something wrong with my lens cause I was like why it was so zoomed in! Turns out I had the digital tele-converter on the whole time! So glad I came across your video thanks again!
Here's one that is lens specific but can be resolved on some OM-D cameras. I had planned a trip to shoot a steam train. Got there early yesterday, found a good spot. Used my C3 preset for CAF+tracking and waited for the train to appear. It came around the corner and the camera would not focus and within 10 seconds the train was passing me. Afterwards, I noticed that I had inadvertently slid the manual focus ring back on the 12-40 Pro when removing it from my bag. I had been doing some close up work at home and enabled the focus ring in the MkII menu then forgot to turn it off again. Lesson is: either turn it off in the menu or remember to check the manual focus ring before you set up for a shoot.
Great video as always, thanks Robin.
Hi Robin, I always appreciate your videos!
I have asked you this before, but I didn't fully understand your previous replies.
You often mention that the camera should always be turned off, to preserve battery life.
I am certainly not arguing against the basic statement, that you should always try to preserve battery life, but I have mentioned previously that if you have the screen closed and set Quick Sleep mode to something low like perhaps 10s, then as soon as you put the camera away from your face, it will go to sleep. In sleep mode, there doesn't seem to be any noticeable drain in my experience.
Waking from sleep is considerably faster than powering the camera on, you often refer to wanting the camera ready in order not to miss a shot, something I totally agree with! Sleep-wake is less than a second, I usually half-press the shutter as I raise the camera to my eyes, and it is ready when I get to aim it.
Currently, I turn the camera on as I head out with it and only turn it off (if I remember to) once I stop using it. Even forgetting to turn it off does not seem to be much of an issue as long as you have also set an Auto Power Off timeout, I have set it to 4h to make sure it happens eventually, but not whilst using it.
As in many cases, different approaches to achieve the same goal are sometimes mostly down to personal choice, so I am certainly not arguing against using the power button approach. If anything, it is meant to mention an alternate way to achieve the same result, that in my experience is more convenient, and actually saves more power, since it goes to sleep within seconds, between your shots even in the middle of using it.
If you find the 10s sleep timeout too low, whilst actively using the camera, it can be raised to 1 min.
However, your previous comments on this seemed to imply that sleep mode is just not a valid method to preserve power, thus more being wrong than another way to prolong battery life. But you never explained why. This has confused me a bit since in my experience it seems to do the job.
I might have misread you, but to me, this part of your position doesn't seem to make sense. I might of course have misunderstood you, if you have the time, it would be interesting to learn about the drawbacks of sleep mode!
Perhaps I should mention that the Quick Sleep is not available on all Olympus cameras, but I have used it on both EM5-II and EM1-II
Thank so much Robin! You understand beginners and common mistakes so well! I'm still learning how to navigate menus and my OM-D so I found this invaluable. You are an AWESOME teacher!
Very helpful video, and not just for beginners. I'll add another mistake: changing one or more settings for a specific shot, then forgetting to change them back for the next shot. Worse: forgetting to change them back before you turn the camera off when done. What's wrong with my camera? Guilty. That's one reason why I still shoot film from time to time. ISO fixed. Meter. Focus. Adjust aperture and/or shutter as needed. Shoot. Hard to mistakenly change a setting when there are so few settings to change. Cheers! And thanks for the video.
I guess most photographers would want the camera to remember the settings, so when they switch it off and on they don't have to readjust the same settings, if they are shooting for a long duration of time. But I understand your situation, perhaps camera manufacturers can give an option in the camera to "reset" the main settings each time the camera is powered off? Of you can use a Custom setting, assign it to one of the C modes on the mode dial, and just use that every time you power on your camera, it will default to the settings which you have already pre-set.
Thanks Robin. With modern digital cameras it’s so easy to accidentally change settings. It was a lot simpler, easier in film days 😀
Best wishes.
That's true. Well, at least, if we know something went wrong, we can easily take more photographs without cost of film wastage!
This is very good for a new Olympus new user.
Yes, I got caught out by the function switch today when I took the camera out of my bag. Great tips as usual, thanks Robin.
Yeah that happened to me so much I chose to disable it altogether. The last time I suggested disabling it, people got angry!
Hi Robin, I have just set up my camera to use the digital 2x teleconverter but I also made sure to use a SuperFine Jpg file to record the image. If I shoot both JPG and RAW and the shot itself has a reasonable amount of information I am finding that the JPG file is 8mb to 9mb whilst the RAW image is around 17mb. It is obviously not the same information being recorded as it's not the same image as the RAW image is shot further back and has different information recorded in its file. I have added the 2x to one button and the change for the file to another. I'm going to give this a go with my 40-150mm f2.8 PRO lens for surfing. I have the 1.4 TC which makes the lens f4 but needs to be stopped down to at least f5 for a sharp image. The 1.4TC will give me a focal length of 420mm in FF equiv but if i use the digital 2x TC I get an effect FF focal length of 600mm and can still use the lens at f2.8. As I only want this for surfers I'm going to give it a try and see how it goes.
To me, your and Peters are the 2 best Olympus channels 🖖
Thanks. You are too kind
Peter ?? Last name.
This video was so useful as i'm buying new camera system. I now add Olympus to the list. Only have 3 now. Ahh desicions ! Thank you sir.
Thanks Robin, always a pleasure to watch your videos…
Thank you! I'm currently saving for a camera and these tips really help!
Thanks, Robin. Most helpful! Enjoy your break.
Thanks Reverend, hope things are going well at your end!
Thanks for the guide! My was the last, no. 10 mistake. Kept thinking why all my shots are the weird exposures. LOL....
Fantastic explanation. Coffee coming!
Thanks Robin
Thanx for all the good videos. im watching each and every one with joy. greetings from a Copenhagen photographer (y)
Great video! I'm still using the original OM-D E-M5. Thanks for the handy tips.
Great camera. I have the Em-5 mk ii after selling my em-10 mk iii. Still have a lot to learn but very nice camera
@@HughesyTech That's so cool. Really like the Olympus cameras especially the OM-D line.
Life saving!! Thanks!
Thanks so much!
wow, so many menus and features
I learnt so much ... thank you Sir Wong :) ... for this very enlightening video ...
Thanks Robin. Love my omd mk1 11.
A good video Robin. I just recently added an EM10 Mark IV to my kit (EM1 Mark ii and EM5 Mark iii). Your tips are always great for someone like me that subscribes to the KISS theory. Well done.
Thanks for your videos. I’m a new aspiring photographer using an OMD em5 with 25mm.
25mm is a great lens to start with. My favourite focal length
Thanks
Really useful Robin.
Robin I love your videos. Please help me understand the menu system.
These tips are very useful, even though I’m not a total beginner. Thanks!
Thanks, glad you found them useful!
Another very helpful and great video thank you Robin 👍
Good video clip Robin. Just one small comment about turning the camera off. If you shoot a series of burst shots with many frames then allow time for the processor to write to the card. I once turned mine off directly after a series of bird in flight shots and had an issue with getting camera to reboot even though I use good quality memory cards. Turned off for 5 minutes then restarted and gave camera time to reboot and return to my settings.
Hey I have not encountered that before, though I believe a glitch could have happened if the camera is switched off while still writing to the card. I'd think the camera is smart enough to wait before switching off, but I guess I need to investigate this further. Thanks for the feedback.
Very useful information thanks
Thanks for the tips!!
I have this and use it a lot. Great second lens. Yes, I was looking at the EXIF!
One of the common mistakes is always watching and listening UA-camrs talk about camera gear instead of spending time shooting
Thank you Robin. Good info. I have been using them since ‘13 but I can pick up info from your videos still
The best advice
Great video, I had 7 out of the 10 activated. Thank you!
Nice informative. thank you❤
Хорошее и полезное видео!
Thanks for tips Robin. You got 1 like from me.
Discovered my dad has had the digital teleconverter function enabled on his gen one em5 for the last decade or so. Real facepalm moment for both of us. At least the raw copies were not cropped.
Great 👍🏻 video tips , thank you . I’m interested in this model for my back up to my E -3
Thanks for a great video.
Robin, you rock 👌🏼
what model are you using in this video? please specify in the future.
Hi Robin, very useful tips. Thank's a lot. Now that you have been using the M1 III for some time, you can tell us your impressions of the (versus) M1 II ? I'm sure that this issue is of interest to many Olympus users. Having the M1 II is it worth buying the M1 III ?
Big help !
How long have you upgraded to the M1 Mark iii? I just noticed it!
Hi Robin. Can you teach me how to select raw + jpeg on my pen ep7 please. Can’t seem to find it. Thanks so much
Thank you so much 👍🏾
Great video Robin
Thanks
I always enjoy your videos, thank you!
I can’t decide between OM, FuJi and leica q2…
I think I will go with fuji because I have seen more art with it.
Thanks a lot for these tips. As always very useful and concise. Much appreciated...
Really helpful video. 😀
The biggest problem with beginners is they don't read the manuals they just go for the quick guide. You need to read the manuals 2. or 3 times so things start to stick in the brain.
And no camera manual I have ever seen is what I could consider "clear". For whatever camera you have, you need to read about some of the more snazzy features. It took me a few tries to figure out how to make good use of ProCap.
I’ve read the manual many, many times and it’s always a valuable resource. Sure it could be better but that’s what these videos are for.
@@xms111 People are now so lazy they rely on YT and fb groups for answers to the simplest of things that are in the manuals.
Don’t forget some people buy used and maybe have no manual. Robin’s videos are a great help for this.
I would consider myself an advanced beginner/ early intermediate (have some rangefinder film experience too). These videos are fantastic as they give context that no manual will provide. Manuals give "how" to do something not "why".
That is very useful! Thank you for much!
Hi Robin , ....
I have olympus EM1. I used 45mm-1,8 prime lens.
I've followed your video about 10 mistakes. I set the camera with iso 200, app priority with f1.8.
I tried to take a shoot handheld in the morning with bright sun , but I got the speed only 15 that was very risky to get blur image. What is your comment ?
Yes, that... I handed my Olympus to a friend, just to look at. When he handed it back, nothing worked. He swore he hadn't changed anything.
Took me some time to figure out he had changed the function switch just by picking up the camera.
Robin. Hi. I have a question, if you don't mind. Do I have to set the focal length in IBIS every time I change a lens?? For example, I have my 14mm-42mm zoom on the camera, but the camera's IBIS shows a 9mm lens. Is this normal? Doesn't the lens tell the camera its focal length? If I do have to set the focal length, how do I account for my 14mm-150mm zoom lens I just got? Will IBIS work with Panasonic lenses too? Will IBIS work with manual lenses. Robin thanks for your patience. I am trying to learn about my EM-10 Mark IV but the doccumentation is scarce and not very good.
While it is always better to have a longer lens when needed, the 2x built-in digital converter can come in handy in a pinch. The outcome, of course, depends on available light, ISO and the resolving power of the lens currently on the camera, but I have used it fairly successfully when I had no other real options. Never say never.
Hi Robin, really like your videos. Could you do one on focus stacking with the em-1, my-2 please?
O.K. Le sigo con los subtítulos en español. Sr. Robin Wong, thank you.
Hi Mr. Wong. How to shoot milky way in omd em10 II? Please thanks
Could you make a video for shooting milky ways?
1. Get a fast lens preferably a prime lens with an aperture faster than f/2.8.
2. Find a nice dark sky site with very limited light pollution, use dark sky map on google.
3. Check the weather and make sure there aren't serious clouds in the sky and that it is NOT a full moon.
4. Set up with a nice sturdy tripod, is a Manfrotto tripod with ball head.
5. Use the 500 rule to determine shutter speed for your chosen focal length don't forget 2x crop factor for MFT.
6. Set the aperture as wide as possible or maybe back one-stop if the lens suffers from aberrations.
7. Use the ISO to achieve proper exposure should be fine with around 1600-3200. Make sure the noise filter is off and you are shooting RAW.
8. Use a remote shutter release or the Ol.Share app to remotely fire the shutter. Consider using anti-shock to reduce shutter vibration.
9. Adjust shutter speed faster if the stars begin to trail.
10. If you cannot achieve the proper exposure without series noise then look into stacking or getting a star tracker.
11. Have fun
James Forrester wow. Very detailed. Thanks so much. I’ll try it soon.
@@gaiusmarquez6344 not a problem. I might do my own video once covid is over regarding how I shoot astro photography using my EM-1 Mark 3 but for the moment I'm locked up at home and cant leave 5km of my house
James Forrester but is it just the same for em10 II? I thought there are a lit of features missing on em10 compared to em1😉
Great video. Also for pro👍
Another one: accidentally setting the camera to ISO 25600. It's easy to do if you overshoot "Auto" and it wraps back to the highest setting.
Thank’s a lot Robin, but i have one question : i have omd em1 mark i, how to change frame rate? Is it possible?
I've read the manual and have problems mounting one of the two lenses I have, so much so I can't take pictures. Help?!
Hi Rubin, i have a question for you, lightroom , capture one, camera raw..which one is better for raws cameras olympus? Thankyou
Hi Robin, really nice video, definitely going to help me in operating the camera more efficiently.
Could you please also give some tips on capturing under low light (apart from the usual tripod and bigger aperture)? The small sensor really struggles sometimes, how can I use the sensor optimally in low light conditions?
Try Topaz De-Noise. It's part of my usual process now, brilliant software. 👍
@@ashleyreynolds6604 Thanks, never heard of it earlier... Will check that out...
I encountered Mistake 1 on my Olympus EM5 Mark II. You say I have to turn off the HDR function. So how do I turn off the HDR function?
Disregard. Found it. Thanks.
On my E-M5 the level meter was off by a a degree or three. Very annoying. It took some time before I found that I could recalibrate it in the menu.
Was it the orientation/level gauge? Yes you can readjust that!
I did not know that. Thanks.
Torkel Stenqvist how?
@@godofhope
Gear K level adjust
On my E-M5.
On my E-M1ii: Gear J1
Hello Mr. Robin, please help me, I turned ON my cam, I'm using Olympus E-m10, i can't see anything on the screen? Is there a prob on my lens?
Hello Robin Thank you very much for your allways helpful videos. I recently bought an OMD M5 Mark 3 and have an issue that can not solve by myself. I made something wrong and can't use the touch screen to select the focus point but don't know hoy to fix it. Can you help me, please? Thanks.
There should be a button on the left on the LCD screen you can press. It cycles between "take picture when screen is pressed", "select area to focus on" and "turn off touch function".
Please help! Can you turn off the level gauge? This camera will not let me take a picture unless it is PERFECTLY level, which is ridiculous and makes taking any picture extremely difficult!
Fine. Disable WIFI mode!!
I think I sent my second battery with my camera to the SAT XDDD.
Tip#extra: if you don't want to mistake the image quality chosing medium or low ... You can leave in the scroll JUST RAW SF SF SF and RAW+JPG, that is , replacing the medium and low by SF and SF.
Sounds like the suboptimal ergonomics of the camera are cause for some of these issues. Thanks for sharing
Who are the 27 people that down voted this? Nice work, thanks!
I'll check it but my mk III doesn't inform if IS is vertical or horizontal , just ... 1...2...3...off. I think.
Robin, thanks for the helpful video.
However, no doubt, unlike many of your viewers, I am new to the OMD system. The menus are complex , a comment that applies to most modern digital cameras.
I find that, when as here, you are giving helpful tips, you are just going at a Formula 1 pace. I simply cannot take in your advice and get lost in your menu navigating. Yes, of course, I can repeat the video , but find the same problem?
A short time ago, you recommended a book on composition. I do not recall which video it was!
Would you be good enough to supply a link in your reply should you have the time.
Many thanks.
I wouldn't over use the ON/OFF switch too much , I did get extra batteries , fixing broken ON /OFF switch can be costly bill as I've discovered myself
I have used and owned more than 10 Olympus cameras for the past 10 years. The ON/OFF is switch never broke. I've not heard of anyone, and I've dealt and met hundreds if not thousands of Olympus users over the years.
@@robinwong I wasn't as lucky
Can not remember reading any manual. So why does my camera has a defrost button? And why does my refrigerator has a sd card slot? Please help😮
The defrost button is to help your fingers operating in extreme cold conditions (snow).
Nijon karadeska ?
I'm still looking for a cold shoe Lego Robin for my Mark 3 😂
Thank you Robin for the very informative video clip :)
Is there any situation where choosing LSF size is a must?
LSF is just the lowest compression setting, it does not give anything more. If you want the best out of the camera you have to shoot RAW.
Robin Wong thanks! ◡̈
good morning🌹
just come to olympus.... leaving right now. so disappointed in the em10 mark iv ... selling asap om is dead
Can't you link spot metering to the focus point in settings?
Yes you can. Here: ua-cam.com/video/MpSPVWz1p_4/v-deo.html
Does anyone know why my em10 powers off after taking a picture ?please let me know I really need the help
it's 2022 and the cheapest used OM-D body only without lens is 133 US $
Mistake 11: Shooting at high ISO.
Full frame guys would say the first mistake for Olympus users is buying M43.
Mistake No 1. Buying an Olympus camera. Too many useless and irritating 'features' causing unnecessary and irritating problems. That hideous menu system does not help either.
All menu systems are hideous if you are used to a different brand.
All, including Olympus, become easier with practice.