Could you please tell me the name and artist of the song towards the end of the video where the speakers are in the dark and playing the music? Thank you. :)
+Osumo Ben Lodan Look at popular TDA2030 amplifier IC's datasheet. Recomended voltage is about 15V. For TDA2050 it's 22V (44V from minus to plus). I have an amplifier where power supply gives +30V and -30V (60V between) to the power amp section (and thus to the speakers).
Actually that is not a color organ. They are just blinking lights. A color organ flashes different colors for different frequencies, or varies with the strength of the source signal. They also use a microphone, or have audio inputs. Not just some lights wired to a speaker.
in my cases it does works but when i increase the volume level into full otherwise the leds doesn't glow up at all. what should i do can anyone suggest me?
This is a Tutorial how to break your led strips... You should use proper transistors and a power supply designed for the LED strips... The result are 2 broken red leds in the strip... Not cool.. You show people how to break their stuff, please do some measurements people, before you build something like this...
+shinyFlake no transistor , transistor is using to make 220 volts(my country voltage) to 9 or 5 v..... resistor is making resistance so on that way power is lower example 14,5 volts into 6
Basic Survival mine too... im from germany. but i control my led strips with transistors.. you can look up transistor or semiconductor... there you will be teached :)
hey guys i just try it on my car speaker its not lightning my led strip is about 12volt i do put my volume max nothing dude i just tried it in a battery but it worked yet any advice please.... or romansuru please do something like reactive led circuit sound in a simple way
GoldenHesus Yeah, that will work. But you need the correct Ohm resistor. That could be hard to find with the fluctuating DC/AC voltage of your speaker system.
Man, this is pretty cool and so much wrong!! Anyone seeing this comment don't that at all. It is changing completely the correct impedance for the output and probably will burn the amp output.
Is this installation cannot effect the sound..???
Your light and woofer is how many volts
Great video! To put a switch to turn the leds off wich cable must interrupt? Plus or minus? Thank you!
SIR! HIGH VOLUME CAN KILL THE LEDS
Cool! Would have maybe looked cleaner to put them behind the mesh speaker fronts, but cool idea! I had no idea it was that simple.
Its simple... But wrong... This way will destroy your led strip soon because you are powering the dc led strip with ac.. And the wrong voltage
yes! this is one of your better inventions
How long does it work before it kill the leds ?
Long, cuz it are 12v led strips
Love from Indonesia!!!
Great Roman!! I like u r videos the most...
Could you please tell me the name and artist of the song towards the end of the video where the speakers are in the dark and playing the music? Thank you. :)
gostei muito....vou fazer tambem....parabéns
Why i would go through all this when i can just plug led to the speaker output
Roman If you used Specker from 3 to 10 use one meter for each or each piece
Nice video sir love this terec
Those broken red leds are so unsatisfying...
thanks
Love your video
sick i like it
Wooow that is so cool!
This is so cool!!!!
Hey even i am nikhil
Very nice lights
Good DIY
very nice Roman ! ;)
Roman Can you do video how to do iron soldering machine ?
Awesome bro
It is a cool looking thing. But you need some external source of powering and use the speaker outputs only as signals not to power the leds.
How to do it
can I use this to a hi fi stereo?
nice bro u give me inspiration
Nice video RomAn
i have to connect the cabel to the speakers? or can i put the cabel from the led into the input?
I love you Roman Ursu and love Moldova my mom is from Cisinau
Nice made
good
hey i just love your diy"$
its owesome! but my wooffers r too big as compared to them like it have 3 speakers at each side
wonderfull.... nice
That LED working with speaker powers.
No need extra power to LED?.
wow looking nyc sir thank you
Osm mahol
That was amazing
so can i do this with any speaker with an amplifier
Use a transistor to pulse the LEDs instead.
cooool!
Wow awesome
i am surprised that it kind of works.
I like it
Nice intro
won't that affect the amplitude of speaker
use a transistor or mosfet.
will it effect on sound quality!!
no it shouldn't. its the speaker that has quality not about the power driven too the speaker
hello can I use it on a hifi system at home?
How many volts led should I take?
Does it work with ac current
Woow :)
Which wire you use to sholder with the speaker??
awesome
Can only be in a sub? I am wanting to put they in a stereo
Goood likeee it
Did anyone notice that the some red strip from 4.15 had stopped working
+kenil mehta That's because audio amplifier could give about 30V to the speaker ... Too much for LEDs.
+Firley 30 volt? Nice joke...
+Osumo Ben Lodan Look at popular TDA2030 amplifier IC's datasheet. Recomended voltage is about 15V. For TDA2050 it's 22V (44V from minus to plus). I have an amplifier where power supply gives +30V and -30V (60V between) to the power amp section (and thus to the speakers).
that led strip is 12v or not?
Is it work for all speakers
verrryyy col man
Will it effect in volume of the speker...
Pls pls pls pls pls pls tell me...
No, it depends on the frequency of the song. Volume will not change anything
Thks it is easy
Actually that is not a color organ. They are just blinking lights. A color organ flashes different colors for different frequencies, or varies with the strength of the source signal. They also use a microphone, or have audio inputs. Not just some lights wired to a speaker.
this is 2.1 channel stereo, has lights for bass, and lights for mid and highs left and right
ชอบมากที่สุด
goood 😄
Can you sell it and how much price you can sell it plzz give to mee
Like...and nice.😏😏😏
Hi sir I tried it but it won't work I used aaaa 12 v led tape
cool
wow I need to do this jojo :)
What is the volt of the led
12volt
in my cases it does works but when i increase the volume level into full otherwise the leds doesn't glow up at all. what should i do can anyone suggest me?
This is a Tutorial how to break your led strips... You should use proper transistors and a power supply designed for the LED strips... The result are 2 broken red leds in the strip... Not cool.. You show people how to break their stuff, please do some measurements people, before you build something like this...
+shinyFlake no transistor , transistor is using to make 220 volts(my country voltage) to 9 or 5 v..... resistor is making resistance so on that way power is lower example 14,5 volts into 6
+Basic Survival do you know how transistors works?
+Basic Survival maybe you mean transformer not transistor...
yap my English is suck
Basic Survival mine too... im from germany. but i control my led strips with transistors.. you can look up transistor or semiconductor... there you will be teached :)
speakers m kitane wat ki led lgai ja sakti h
Thanks bro
what is the 2nd song? name
is there any music audio controller attached. because it's working on music and light is also blinking as per music beats
just powered by the audio power from the amplifier, LED are very high ohm and will not draw much power at all.
I have a 160w speaker , 12v car radio and a 12v led light. I fixed them like this. But didn't work. Why is that? Please help me.
Bcz speakers output is not 12 v u have to use low voltage lights
এ ভাবে লাইট লাগালে টেনডেস্টার কেটে যাবে,,
Strip kitne volt ki h
so simple, but so cool
I connected the wires but not working!!
doesn't work for me :(
Same 😔
so good 😇😇😇😇😇
Kay bat hai
You cool
hey guys
i just try it on my car speaker
its not lightning
my led strip is about 12volt
i do put my volume max nothing dude
i just tried it in a battery but it worked yet
any advice please.... or
romansuru please do something like reactive led circuit sound in a simple way
12Volts Are more than power of the ampilifier
I can't you shay if the speaker 3 to 10 watt this means 3000 to 10000 watt speaker
How to kill your amplifier
what that last song name
Then how do you put a different power suply for the led's while the led's still react to the music?
Why would you do that?
+GoldenHesus So your LED's will work on a lower voltage.
Osumo Ben Lodan A resistor??
GoldenHesus Yeah, that will work. But you need the correct Ohm resistor. That could be hard to find with the fluctuating DC/AC voltage of your speaker system.
hard pfft read on box i had 300 watts 2 subwoofer and 150 watts 7 satelits for voltage just attach voltmeter job done
It will distort the sound.
Not work i have a 5.1 system how to work
I think I'm not gonna do that... because it will ruined my speaker or may be its me.. only..may this can make my audio low or noice
Better is use the transitors.
led kine volt ka hai
And after 2 days your amplifier will broken
Man, this is pretty cool and so much wrong!! Anyone seeing this comment don't that at all. It is changing completely the correct impedance for the output and probably will burn the amp output.
🔥 🔥 🔥
Goog